Skobelni-debelinec SCM MiniMax FS4

SCM MiniMax FS41

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Pjdpfxovwga He Agxjpr Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: rabljeno, Debelinka: Ppedpfxsxwvqds Agxor Maksimalna širina skobljanja: 400 mm Maksimalna višina skobljanja: 240 mm Minimalna dolžina obdelovanca: 200 mm Premer nožnega valja: 700 mm Število nožev: 3 Število obratov nožnega valja: 5000 obr/min Ročni dvig delovne višine Poravnalka: Skupna dolžina miz: 1810 mm Nastavljive mize Zvočno dušena os nožev Zaščita za os nožev Odvzemni priključek: 2x120 mm Nagibni paralelni prislon Napajanje: 400 V Moč motorja: 5 kW Skupne dimenzije: Dolžina: 2030 mm Širina: 800 mm Višina: 1160 mm

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Ppedpshkz E Tofx Agxjr Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° Podpohfufgsfx Agxopr -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Pedpfx Agohpmawexspr Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Stanje: novo, Panel Saw HOLZKRAFT sc 2c Pjdpfx Aeu R Sy Njgxjpr - Demonstration Machine - tilting, parallel fence with fine adjustment ----- Technical Specifications ----- Extraction port Ø: 120 / 60 mm, Working table height: 900 mm, Speeds: 4,000 rpm, Max. saw blade Ø: 315 mm, Cutting width with parallel fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, Cutting length: 1,600 mm, Tilting range: 90 - 45°, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new demonstration unit -

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Podpfxsih Dxde Agxspr Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, TM2015 Spray Booth Pedpjd S N S Hjfx Agxopr Working dimensions (mm): 2000 (W) x 1500 (H) x 450 (D) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical data: • 1.5 kW fan output • 7,600 m³/h capacity • 950 Pa pressure • Discharge left or right • 3-stage air filtration • Filtration efficiency 98% • Explosion-proof ATEX fan • Control panel: IP66 • Hermetically sealed lighting: IP65 Our spray booths stand out thanks to their very high manufacturing quality, operational safety, and customized configuration of booth parameters for your building. We provide consultancy on the selection of spray booths, dust extraction systems, exhaust systems, and industrial heat recovery solutions. CHOOSE BUMEX SP. Z O.O. • Very high quality of machines offered on the market • Professional consultancy and service • Warranty • Warranty and post-warranty service • Complete technical documentation • 100% customer satisfaction • All BUMEX SP. Z O.O. products are CE certified We offer our own transport – pricing is arranged individually for each quotation. We issue VAT invoices. Short lead times! Possibility to order machines in various customized configurations and dimensions! Please do not hesitate to contact us.

Stanje: rabljeno, Leto izdelave: 1992, s Centrofix-skobelno gredjo Stroj očiščen, popolnoma pregledan Mize izmerjene – zelo natančno nastavljene, max. 5/100 mm Preizkusno skobljanje Rabljeno, dobro stanje, malo rabljeno Proizvajalec Maka Tip AH 430 Leto izdelave 1992 Ppodpfx Agexuv Rroxsr Serijska št.: 9201531 GS-pregled za lesni prah Motor 3,0 kW Upravljalna plošča zgoraj Širina skobljanja cca 430 mm Dolžina prihodne mize cca 1500 mm Dolžina odvodne mize cca 1200 mm Nihajno varovalo Utori/utišane mizne letvice Število nožev: 4 kosi Centro Fix-noževna gred Nastavitev mize z ročnim kolesom Samodejna zavora Priključek za odsesavanje D 140 mm Potrebni prostor cca 2700 mm x 1200 mm x 1400 mm Teža cca 800 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva

Stanje: novo, Bandsaw HOLZKRAFT HBS 433 - Demonstration machine - Upper saw blade guide, Ppodpfx Agsu R S Akoxor Lower saw blade guide, Quick-release tensioning device via eccentric lever ----- Technical Data ----- Wheel diameter: 430 mm, Max. cutting height: 270 mm, Max. cutting width with fence: 370 mm, Max. cutting width without fence: 410 mm, Max. blade length: 3,345 mm, Table size: 610 x 431 mm, Table tilt: -10 to +45 °, Motor 400 V: 1.5 kW, Extraction port diameter: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 bandsaw blades (6 / 16 / 25 mm) - new demonstration machine -