Scm Minimax nakup rabljenega (594)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: Dimenzije litoželezne mize: 905 x 372 mm Število vreten: 21 Razdalja med vreteni: 32 mm Maksimalna razdalja med vreteni: 640 mm Največja višina vodoravnega vrtanja: 60 mm Največji premer orodja: ø40 mm Debelina obdelovanca: 10-85 mm Največja širina plošče med ročicami: 833 mm Največji pomik vrtalne glave: 70 mm Število vpenjalnih prijemal: 16 Moč motorja: 400 V / 50 Hz, 1,8 kW (2,5 KM) Hitrost motorja: 2800 min-1 Delovni tlak: 5 bar Teža: 320 kg Pnevmatska nastavitev vrtalne glave v navpični in vodoravni smeri. Lasdjxauw Uopfx Ah Djh Zaklep glave v položajih 0° – 45° – 90° Standardno vključeni 2 pnevmatski pritiskači za pritrjevanje obdelovanca Višina vrtanja nastavljiva z ročnim kolesom z mehanskim prikazovalnikom Globina vrtanja nastavljiva s pomočjo 5-pozicijskega revolverja.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, – zelo dobro stanje – italijanska proizvodnja – leto proizvodnje: 2000 TEHNIČNI PODATKI: OBLIČNI STROJ: – delovna širina: 410 mm – število nožev: 3 kosi – dimenzija dovajalne mize: 1030 x 410 mm – dimenzija izhodne mize: 930 x 410 mm – kotno nastavljivo vodilo – dušilni glavnik DEBELINKA: Laodpfx Asxl D Nqoh Djh – višina skobljanja: 3-230 mm – premer valja: 72 mm – obrati valja: 5300 obr/min – dimenzije mize: 700 x 410 mm – hitrost podajanja: 7 m/min – glavni motor: 4 kW – dimenzije stroja (d/š/v): 200 / 90 / 120 cm – teža: 400 kg

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Lodpfsvwd U Ijx Ah Doah Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: novo, Leto izdelave: 2023, minimax twf 55es Robust steel and cast iron construction Anodized aluminium format sliding table Large-dimensioned, tiltable milling unit made of cast iron, tiltable up to -45° backwards Four milling speeds from 3,500 to 10,000 rpm Standard right/left rotation Height and angle display accurate to 0.1 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling guard included in delivery TECHNICAL DATA Dimensions and Weight Lodepdp Ncspfx Ah Doah Length (product) approx. 1,200 mm Width/Depth (product) approx. 1,400 mm Weight (net) approx. 510 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Table length 1,200 mm Table width 530 mm Table height 900 mm Sliding table length 1,200 mm Sliding table width 360 mm Sliding table height 142 mm Installation Information Space requirement length 2,800 mm, width/depth 2,120 mm Space Requirement Explanation The dimensions consider maximum travel paths or usable lengths. Machine body length 1,200 mm Machine body width/depth 846 mm Working area length 1,600 mm Working area width/depth 2,300 mm Working Area Explanation Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical Data Connection voltage 400 V, mains frequency 50 Hz Drive motor power Milling spindle 5.0 kW Spindle tilt 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3,500/6,000/8,000/10,000 rpm Milling spindle speed display LED at the machine front Spindle shaft diameter 30 mm Max. milling tool diameter Max. tool diameter 240 mm Max. lowerable tool diameter 230 mm Max. profiling tool diameter 240 mm Max. tenoning tool diameter 320 mm

Stanje: pripravljen za uporabo (rabljen), Tehnične lastnosti Širina mize: 550 mm Laodpfx Asub Euleh Dsh Asimetrična dolžina mize: 2700 mm 4-nožni valj premera 120 mm Ograja iz litega železa, nagib od 90° do 45°, dolžina 1200 mm Motor: 4 kW Sesalni nastavek premera 120 mm Težka izvedba stroja Elektrika in motorji Napetost: 380 V Priklop: trifazni Moč: 5 kW Motor: 5,5 KM Skupne dimenzije

Stanje: rabljeno, Leto izdelave: 2016, Horizontalno ali vertikalno vrtanje 21 vreten na 32 mm razmaku Največja širina plošče: 833 mm Največja razdalja med vrtalnimi središči: 640 mm Najmanjša / največja debelina plošče: 10–85 mm Ledpfx Ahjwl H Dgo Deah Delovna miza: 905 x 372 mm Maksimalni hod vrtalne enote: 70 mm Glavni motor: 1,8 kW Serijska številka: KK135136 Leto izdelave: 2016, skladno s CE standardi

Stanje: novo, Leto izdelave: 2025, Professional wide-belt sander Electric height adjustment of the table Quick belt tensioning via lever Upper belt with additional graphite coating Ljdpowxrl Nofx Ah Deah Professional sanding shoe Rollers with 250 mm diameter ensure optimal guidance 2 sanding belt speeds Right and left rotation motors Tilting sanding shoe adapts to the surface Quick and easy sanding belt replacement Right-left rotation standard Manufactured in Italy. Precisely balanced rollers provide optimal belt drive Quick belt tensioning enables fast and hassle-free belt changes. Technical data: Working table dimensions: 2500 x 1100 mm Working table height adjustment: 580 mm Cross travel of the working table: 620 mm Sanding shoe dimensions: 150 x 360 mm Belt speed: 9 m/s and 18 m/s Motor power 400 V / 50 Hz / S6 - 40%: 4 kW Table height adjustment motor power: 0.45 kW Drive roller diameter: 250 mm Sanding belt dimensions: 7100 x 150 mm Dimensions (L x W x H) in mm: 4040 x 1510 x 1510 mm Extraction port diameter: 140 mm Weight: 420 kg

Stanje: novo, - NEW - Description Cutting plane directly at the saw blade Heavy-duty steel cast iron construction Precision-guided sliding table made of aluminum, anodized as standard Large support table on telescopic arm, longitudinally adjustable Extendable aluminum telescopic fence, angle-adjustable with professional fence stoppers Parallel fence with quick-lock and fine adjustment Large, milled cast iron working table remains permanently flat Standard table extension and table enlargement enable easy processing of larger workpieces Smooth running and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made from cast iron is double-mounted on the cast table, ensuring stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with scoring unit installed Equipment features: Double trunnion saw unit Large, made of steel/cast iron Close to the saw blade, mounted on both sides for precision, smooth running, and long service life Height and tilt (up to 45°) adjustable via hand crank Maximum cutting height is achieved even with scoring unit installed Also available with scoring unit Telescopic fence Extendable telescopic fence up to max. 2550 mm Angle-adjustable With professional fence stoppers Aluminum sliding table Equipped with the proven ball contact system Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft warranty on wear of the guide rails Parallel fence with round bar guide With fine adjustment and quick lock Stable round bar guide made of precision-ground steel, 45 mm diameter Foldable as standard for cutting large workpieces Technical Data: Dimensions and Weights Net weight approx. 380 kg Extraction connection Suction port diameter 120 mm Saw blade guard suction port diameter 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical Data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated duty cycle S6 Current type AC Duty cycle 40 % Mains frequency 50 Hz Sliding table and table Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscutting width to the left of blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilt 90 - 45° Lasdpfx Aevyuqfoh Doh Saw blade speed 4000 rpm Item No. 5504323

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Lodovwga Hopfx Ah Doah Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Laedpfsvwf Ucex Ah Doh Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, – New – Lasdjvwf Hrspfx Ah Dsh Description: TERSA quick-change system for tool-free, rapid planer knife changes Four-knife cutterblock delivering superior planing results Smooth operation due to precision engineering and heavy cast-iron construction Long surfacing tables for accurate jointing Robust surface tables made from ribbed grey cast iron, machined and stress-relieved for high durability and permanent flatness Large, stable aluminium surface fence with round-bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° Auxiliary fence included as standard Powerful 5.0 kW industrial motor Stable steel and cast-iron construction Slot mortising attachment available as an option Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net weight: approx. 465 kg

Stanje: novo, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made of heavily ribbed cast iron and frame made of welded steel ensure torsional stiffness and vibration-free operation - Unique in this performance class: smooth-running anodized aluminum sliding table with ball contact system - Saw blade tiltable from 90° - 45° - Table extension with angle scale and aluminum crosscut fence for mitre cuts on panels and large workpieces - Planer unit equipped with TERSA quick-change system with three planer knives - Spiral-toothed steel feed roller for consistent workpiece feed during thickness planing - Curved milling guard hood for profiling, standard with fine adjustment - Milling unit with two speeds - Power transmission for the units via three independent motors - Quality Made in Italy Technical Data: Dimensions and Weight Net weight approx. 245 kg Surface Planer Planer table width 300 mm Planer table length 1200 mm Saw/Planer fence tilt angle 90/45° Max. surface planing depth 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter for saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Remarks on space requirement: Dimensions reflect maximum travel range or working length. Thickness Planer Thickness table length 450 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 200 mm Max. thicknessing depth of cut 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated duty cycle drive motor S6 Duty cycle drive motor 40 % Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Spindle Moulder Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle height 75 mm Spindle speeds 5000 – 7500 rpm Max. Cutter Diameter Max. cutter diameter 160 mm Max. lowerable cutter diameter 180 mm Max. tenoning cutter diameter 275 mm Planer Knife Shaft Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with rip fence 540 mm Max. crosscut width left of blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Ledpfxevwf Enj Ah Deah Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer knife shaft - Anodized aluminum sliding table - Multifunction fence for rip and surface planing - Table extension with crosscut fence and fence jaw - Eccentric clamping arm Item No.: 5500030

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Ljdpfx Aovwfqweh Djah Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: novo, - New - Description: - Premium features for high productivity with minimal space requirements! - Intuitive operation with eye-S control and a large 10" touchscreen: HMI Maestro Active Edge, graphical display of all processing units and their operating status, graphical simulation of machining processes, control of all processing units, regulation of glue pot temperature, assistance functions for machine setup according to the processing program, error diagnostics for quick resolution of simple faults, processing parameter statistics, USB port, prepared for network connection, ready for Industry 4.0 with API REST data transmission protocol - Excellent accessibility to working units thanks to the large hood providing protection and noise reduction - Monoblock steel construction ensures high stability and rigidity of the machine - Automatic positioning of units when switching panel thickness - Automatic feeding of edge strips with edge magazine (me 35 t s): Solid wood edge strips are automatically loaded and synchronized with the panel feed - Panel feed by feed chain with rubber glide shoes - Extendable workpiece support - Adjustment of the infeed fence via distance plates Lsdpfxevwfmle Ah Deah Technical Data: Dimensions and Weight Length approx. 3314 mm Height approx. 1300 mm Width/Depth approx. 1085 mm Weight approx. 545 kg Flush Radius Milling Unit Flush radius milling unit motor power 2 x 0.35 kW Flush radius milling unit spindle speed 12,000 rpm Flush radius milling unit cutter diameter carbide tipped 55.3 mm Flush radius milling unit extraction connector diameter 2 x 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Glue Unit Glue pot motor power 0.25 kW Glue pot extraction connector diameter 60 mm Glue pot working temperature 190 °C Glue pot fill volume 0.8 kg Pneumatic Connection Operating pressure 6.5 bar Air consumption 470 l/min Feed Feed motor power 0.55 kW Feed speed 7 m/min Edges Edge thickness (coil material) 0.4 – 3.0 mm Edge thickness (strip material) 0.5 – 5.0 mm Pre-Milling Unit Pre-milling unit motor power 3 kW Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Pre-milling unit spindle speed 7200 rpm Pre-milling unit cutter height 56 mm Pre-milling unit extraction connector diameter 2 x 80 mm Scraper Units Radius scraper 2 mm Buffing Unit Buffing unit motor power 2 x 0.14 kW Buffing unit speed 2800 rpm Workpiece Workpiece thickness 8 – 50 mm Minimum workpiece width 110 mm Minimum workpiece length 120 mm Art.-No. 5507235

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Ledpfx Aoxqggcoh Doah Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: rabljeno, Štiristranski skobeljni avtomat SCM Sintex NTE Elektronski štiristranski skobeljni in profilni rezkalni avtomat Širina skobljanja: 180 mm Višina skobljanja: 105 mm 4 vretena Motor vretena 1 + 4: 7,5 kW Motor vretena 2 + 3: 7,5 kW Premer vretena: 35 mm Dolg podajalni pult pribl. 2300 mm Hitrost vretena: 6000 obr/min Hitrost podajanja: 6/12 m/min Električno nastavljanje višine in širine Laedpexqf Dyefx Ah Deh Črpalka za mazivo Vključno s strojnim orodjem Stroj JE SERVISNO PREVERJEN – V ZELO DOBREM STANJU Iz zaloge Lieboch / MOŽNOST LEASINGA

Stanje: zelo dobro (rabljeno), RABLJEN STROJ - V380/50 - "CE" Koda: CAL-052 _ _ _ Delovna širina: 1100 mm 1. skupina: jekleni valj 2. skupina: gumijasti valj 3. kombinirana skupina: valj/blazinica Ljdpfx Ahexp Ecys Deah Moč motorjev: 2 x 15 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Znamka: SCM Model: OLIMPIC K 500 T/ER-2 - CE Avtomatski robni lepilni stroj z brusilno enoto za robove iz lesa, furnirja, PVC, melamina, ABS – primeren za pohištvo, stavbno mizarstvo, opremo po meri, panele, kuhinje, kopalniško pohištvo in razne druge izdelke Tehnični podatki Min./max. višina panela: 8–60 mm Višina panela zaobljeno z rondomatom : 10–45 mm Debelina roba: 0,4–8 mm Debelina roba v roli: 0,4–3 mm Minimalna širina panela: 55 mm Hitrost pomika: 11 m/min Pritiskač z motoriziranim vertikalnim pomikom Nosilna rama za panele Zvočno izolirana zaščitna kabina Vhod tekočin Ledpsxnvr Ajfx Ah Doah Sestava: Enota za nanašanje anti-adhezivnega sredstva z dvema šobama – dve posodi z ločilno tekočino proti prijemanju Predrezkarji z dvema visoko-frekvenčnima motorjema – diamantna orodja H64 mm – premer 100 mm, F 30, h 65 – komplet za kopiranje Enota za lepljenje VC 560 za nanos roba na panele do 60 mm – prostornina lepilnega lonca: 1,5 kg – izmenljivi lonec Prekrajna enota z dvema neodvisnima motorjema, vsak 0,35 kW pri 12.000 vrt/min – nagib motorja od 0° do 15° – 2 žagi premera 115 mm – čelni kopirji Nagibna obrezovalna/krivilna enota za odstranjevanje presežka roba zgoraj in spodaj – 2 motorja po 0,55 kW – 12.000 vrt/min – nagib od 0° do 25° – 2-položajni pnevmatski komplet za hitro menjavo obdelave tankih ali radijus robov Zaoblitvena enota z dvema motorjema na prizmatičnem vodilu – omogoča zaobljenje in obrezovanje tankih in debelih robov – 2 motorja po 0,55 kW – 12.000 vrt/min Enota za strganje roba za optimalno dodelavo ABS/PVC roba z rotacijskimi kopirji in odsesovalno kapuco ter zbiralno kaseto za odrezke Enota za strganje lepila – odstranjuje ostanke lepila s spodnjih in zgornjih površin panela Krtačna enota za čiščenje in poliranje plastičnega roba – motor po 0,25 kW – premer krtače 150 mm Stisnjen zrak: 7 bar Skupne mere: 5500 x 1150 x 1550 (V) mm Teža: 1.780 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB14104, thickness planer, cleaned and overhauled. Fully operational Lsdpou Tq Eaofx Ah Djah

Stanje: rabljeno, Leto izdelave: 2011, · Working area: 2,550 x 1,067 mm · Travel range X-Y: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Pass-through height: 120 mm Boring unit F14: · Boring head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M 10 with 11 mm fitting · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the boring head · Grooving saw blade with diameter up to max. 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm stepless via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Clockwise / counterclockwise rotation · Ceramic bearings · Prepared for use with angle gearboxes Tool changer TR10: Automatic side tool changing device for 10 tools. · Number of tool stations: 10 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight for all tools: 28 kg A central extraction port collects all processing units into a single connection (D = 200 mm), reducing the required extraction capacity to approx. 3,200 m³/h. Worktable TVF: The worktable is designed to guarantee maximum operating freedom. The vacuum quick-clamping system provides maximum flexibility for accurate positioning and optimal hold of workpieces. · 4 TVF supports, L = 1,100 mm, infinitely adjustable in X · 12 TVF vacuum cups, 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · The retractable reference stops are controlled via CNC Automatic central lubrication: An electronic CNC controller distributes the correct amount of lubricant (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar Laedpfxoxqd Scj Ah Deh PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in the operator’s native language Safety features with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse protection: 64 A · Power supply: 400 V, 50-60 Hz · Compressed air: 6-7 bar · System air pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports, L = 1,100 mm, and 18 vacuum cups, 120 x 120 mm Cross laser for positioning the vacuum cups Two cross lasers mounted on the unit carrier enable convenient positioning of the vacuum cups. Location: Supplier

Stanje: rabljeno, SCM S 630 težka debelinka - za mizarje in tesarje Laedpfx Ahoxp H D Se Djh Širina skobljanja 630 mm Višina skobljanja 300 mm 4-nožni varnostni skobeljni valj, avtomatska zavora / svetlobni indikator Glavni motor 7,5 kW elektronska nastavitev debeline mize digitalno/LED brezstopenjski podajalnik 6-20 m/min. Stroj iz izobraževalne delavnice v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro Lsdpfovvi I Rsx Ah Deah USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, 4-osno CNC obdelovalni center SCM CNC Tech Z 27 Delovno območje: 2650 x 1240 mm Pomik X-Y: 2995 x 1385 mm Dolžina pomika osi Z: 200 mm Prehodna višina: 180 mm TV-delovna miza Ljdsxg I Efepfx Ah Deah Avtom. menjalec orodij za 8 orodij Horizontalna rezkalna enota za rezkanje in utore (enota za ključavnični okvir) Orodni vpenjalni sistem HSK Avtomatsko centralno mazanje Vektorska rotacijska os 0 – 360 stopinj Kotni prenos MIMATIC HSK 63 F Dodatni omejevalnik desno z valjčno progo Laserska naprava Letnik 2005 Stroj je FUNKCIONALEN / iz male delavnice – razdrtje podjetja Stroj je v uporabi in ga je mogoče kadar koli ogledati pri prodajalcu Posredovanje po naročilu stranke Iz lokacije

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Laodsvwbp Aopfx Ah Doh

Stanje: rabljeno, Leto izdelave: 2023, Technical Data Working Area I.M.S. I.U. Working area X-axis: 5515 mm (217") Working area Y-axis: 1620 mm (63¾") Panel passage Y: 1900 mm (74¾") Panel passage Z: 250 mm (9¾") Workpiece length for pendulum operation: 2600 + 2600 mm (102" + 102") Traverse speed X-Y axes PRO-SPACE: 56 m/min (184 ft/min) Traverse speed X-Y axes PRO-SPEED: 78 m/min (256 ft/min) * For further details, please refer to the respective machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for motor JQX or to 1720 mm (67½") for motor KS/KT Maximum loadable panel width for horizontal drilling, only with vertically oriented electrospindle, without central reference stops Installation Data I.M.S. I.U. Installed power: 23 – 28.5 KVA Electrical standard specifications: 400 V voltage, 50 Hz frequency, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction nozzle diameter: 250 mm (9.8 inches) Noise level: - VSA* when drilling: 72.2 dB(A) - LAV* when drilling: 74.6 dB(A) - when milling: 74.3 dB(A) - LAV* when milling: 80.7 dB(A) Reference standard EN ISO 11202:1995 Lodpfx Ahjwb Trpj Djah * VSA = without load and without extraction * LAV = in operation, with extraction Location: Nattheim