Scanmax Zeiss nakup rabljenega (110)

Stanje: zelo dobro (rabljeno), Zeiss coordinate measuring machine Type: O-INSPECT 442 Machine designation: Coordinate measuring machine Machine type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for simultaneous display of actual condition, nominal profile, and deviations, making measurement results very easy to recognize and interpret. General data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise level of the CMM: < 70 dBA Electrical data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Connection: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Rapid traverse speeds: Creep mode: SLOW function 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement mode Axis (X,Y): max. 200 mm/s Axis (Z): max. 50 mm/s Axis (3D): max. 287 mm/s Ambient conditions: For flawless operation of the coordinate measuring machine, the following conditions must be met. Ambient temperature for operational readiness: +17˚C to +35˚C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement operation: 20˚C ±1 K Altitude above sea level: 100-125 V: max. 3000 m ASL 230-240 V: max. 2000 m ASL Probe system: Probe system: CFS Probe types: Probe type: CFS 2mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface tilt relative to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface tilt relative to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface tilt relative to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflection properties of the workpiece surface. Rotary table: Weight and resolution Rotary table weight: 7 kg Resolution: 0.15’’ Dynamics: Podpsw Titlofx Aafjrc Angular velocity, max.: 50˚/s Rotational speed: 8.3 min-1 Scope of delivery: In the standard version, the coordinate measuring machine type O-INSPECT is supplied with the following components: Coordinate measuring machine (CMM) Controller (integrated) Control panel PC with peripherals Software - CALYPSO 5.2 Documentation Probe system Reference stylus Calibration standard Calibration template Scope of delivery: (Zeiss coordinate measuring machine as pictured) Condition: used (Changes and errors in the technical data and information are subject to correction!) Please ask about transport options before purchase. Further questions? We would be glad to answer them for you by phone.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 800 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 500 mm, trajanje garancije: 12 meseci, skupna višina: 3.000 mm, vrsta vhodnega toka: trifazni, We are selling our test and demonstration machine from our Solution Center. Additional machines are available. Please feel free to contact us. Zeiss | UMC850 with Renishaw PH10 and SP25 scanning system featuring Renishaw MODUS metrology software Retrofitted coordinate measuring machine (CMM) with the latest Renishaw technology Year of manufacture: approx. 1990 / Refurbished in 2022 – wrapped in light grey Measuring range XYZ: 800 x 1800 x 500 mm Measurement uncertainty MPE (E0): 2.6 + L/300 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ encoder system on all axes - Renishaw PH10 motorized indexing head with SP25-2 scanning system incl. FCR25-L6 probe change rack (6 ports) - MODUS metrology software, latest version, with CAD import (STEP format), includes 1 year software maintenance - PC system with Windows 10, dual 27" TFT monitors (NEW) including height-adjustable desk - Control cabinet equipped with the latest safety features - Base plate We are happy to configure the equipment according to your requirements. Predpfovxhzusx Aafsc Optional service package (upon request): Delivery to site (curbside) | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and configurations available upon request

Stanje: rabljeno, 3D Coordinate Measuring Machine ZEISS NUMEREX – Non-functional Granite measuring plate, granite measuring table, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W: 1525 x 1435 mm Usable area: 1525 x 1100 mm Prodpfx Ajfy U Eweafjc Measuring plate thickness: 305 mm Clear passage within portal: 1100 mm Probe holder diameter: Ø 9.5 mm Compressed air connection: 6 bar Power supply: 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment via pneumatic slide guides for X, Y, and Z axes - Plate mounted on subframe with 5 leveling feet, 3 bearing pads for the leveling feet - Computer and software missing (not included and not available) → unit is non-functional! Space requirement of the measuring machine L x W x H: 1600 x 1850 x 2200 mm Machine weight: approx. 2.8 tons One side of the plate is damaged (see picture), otherwise in good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1966, Zeiss measuring microscope, type WMM 150/75, year of construction 1966. It is used for measuring workpieces of all kinds, especially gauges such as templates, thread gauges, patterns, etc. Measurement possible in rectangular (X+Y) and polar coordinates (X or Y). Measuring range: 150 x 75 mm. Includes operating manual and accessories. Psdpjt T Uavefx Aaforc

Leto izdelave: 1995, Stanje: rabljeno, x-axis travel: 9,200 mm y-axis travel: 1,600 mm z-axis travel: 2,400 mm Test piece diameter: mm Working area: mm Centre distance: mm Control: ZEISS C 99 Total power requirement: kW Machine weight approx. 30 t Required floor space approx. 10 x 3.6 m ZEISS - STIEFELMAYER Double-sided CNC traversing 3D measuring machine Type: SMM Duplex / Eagle Eye Year of manufacture: 1995, but repeatedly modernized Measuring stand working range: X axis (horizontal): approx. 9,200 mm Y axis (transverse): approx. 1,600 mm / 3,200 mm Z axis (vertical): approx. 2,400 mm Measuring plate dimensions (4-piece): 10,000 x 3,500 mm External dimensions of the measuring plate incl. guide rails: 10,000 x 3,650 mm Measuring plate thickness: approx. 450 mm Height of measuring plate above floor: 650 mm Max. traverse speed: approx. 150 mm/sec Total weight: approx. 30,000 kg Special features / accessories: • Left and right: measuring stands system C / SMM mounted laterally, laterally adjustable along the measuring plate, with column cross-section for vertical adjustment 160 x 160 mm and cantilever arm cross-section for horizontal adjustment approx. 80 x 80 mm • Machine/CNC control type ZEISS C 99, one unit per measuring stand • Mounted probe head type RST-P with DSE rotary and swivel joint and CAA correction, as well as a reference probe, collision protection • EAGLE EYE Navigator for optical measurement, especially of vehicle bodies and other pressed parts, provides significant time savings; retrofitted in 2007 • Probe changing station for 8 probes, mounted at the front on the plate • Measuring plate made of special cast iron, divided into 4 plates = 4 x 5,000 x 1,750 mm, with height-adjustable leveling feet approx. 250 mm high in sufficient quantity Prsdpfet Hwwkjx Aafoc • T-slots along the y-axis ±500 mm and various precision bores with threads at specified intervals. Y = ±300 / 700 / 1000 mm Machine is delivered WITHOUT appropriate SOFTWARE! (Remains at factory), without operator panels, and without calibration standards (spheres) Condition: Good to very good – ideal for measuring large automotive body parts Delivery: Ex stock – as inspected (without software & operator panels) Payment: strictly net – upon receipt of invoice We look forward to receiving your order.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control system: Zeiss C90, probing system: PH6/TP6, max. measurement deviation: 3.6+L/250µm, max. angular error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection possible. Pjdpfxewzldwe Aaferc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Vrsta raster elektronskega mikroskopa Zeiss XB 350 Oprema in dodatki • brez FIB stebra • programska oprema SmartSEM in SmartFIB • GIS s Pt-prekurzorjem • integrirani plazemski čistilec • EDX Oxford Xplore 30 (vklj. vmesnik in programska oprema) • avtomatska 200 mm prehodna komora • električni prehod (2 x 15 kanalov) • obtokovni hladilnik • Quiet Mode vakuumski rezervoar • ... kot tudi miza, zaslon, upravljalne konzole (lastniška tipkovnica in joystick Zeiss) ter različni nosilci vzorcev Prva uporaba: avgust 2024 Lokacija: Mainz Razpoložljivost: po dogovoru takoj na voljo. Naprava je še vedno v uporabi in si jo lahko ogledate ter jo testirate. Predjw Rdvvopfx Aafjc Naprava je brez napak ali poškodb in je v celoti funkcionalna. Dodatne informacije na zahtevo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, skupna masa: 1 kg, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideally suited for precise 3D measurements in industry and research, especially when components need to be measured in challenging environments. Fast application and easy operation. Condition: Lightly used, mainly for tradeshows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue laser, class 2, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) · Sensor cable · Transport case · Acceptance test at our facility with reference spheres according to ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver Pedpfow Swpljx Aafjrc ZEISS INSPECT OPTICAL 3D Free · Create and edit new and existing projects · Import of point clouds, polygon meshes · Generation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · Import of standard CAD formats: IGES, VDA, STEP, JT Open, STL, PLY · Use of common alignment methods · CAD comparison with colored deviation display · Dimensioning and form/position analyses according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Measurement data acquisition and project management · Configurable workflow assistant · Switching measurement modes and adjusting exposure time directly on the sensor · Automatic sensor calibration control · Pre-registration of reference points with graphical support · Online display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging top and bottom sides · Cutting of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g. G3D format, STL format) Note: The device has been used exclusively for demonstration, training, and exhibition purposes, and shows some signs of use. If required, we can provide a suitable laptop for an additional charge. A 3D acceptance certificate is available. Additionally, when purchasing the T-SCAN Hawk 2, we are also open to taking old GOM systems in trade.

Stanje: zelo dobro (rabljeno), Rotary table (presumably Zeiss make), Ø 630 mm Completely overhauled in 2013 for Pantec control system Prsdpfx Aaom Exa Ejfjc New rotary encoder and read head from Renishaw

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 106705, merilno območje os X: 1.200 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 1.000 mm, priključek za stisnjen zrak: 6 letvica, Used coordinate measuring machine Measuring range (X/Y/Z): 1200 x 1800 x 1000 mm Measuring software: Zeiss Calypso 5.8 (incl. Curve software option) Probe system: Zeiss VAST Gold Control unit: Zeiss C99 Accuracy: 3.7 + (L / 250) Prsdpfxovgny Te Aafoc Delivery, calibration, and training can be offered as options.

Leto izdelave: 1990, Stanje: rabljeno, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Refurbished: 2000 X-axis as longitudinally traversing portal: 850 mm Y-axis cross slide within portal: 1,200 mm Z-axis as measuring head quill (vertical) approx.: 600 mm Clearance between portal sides approx.: 1,000/1,080 mm Vertical clearance approx.: 750 mm Total table size approx.: 1,000 x 2,100 mm Table height above floor approx.: 850 mm Overall machine height approx.: 3,050 mm Weight approx.: 3,800 kg Special equipment / Accessories: – Granite plate as measuring table and crossbeam, vibration-dampened – Measuring 3D probe head for accommodating 5 different probe inserts and for SCANNING operation for continuous data acquisition, resolution 0.1 µm – Path control for 3 axes simultaneously – HEWLETT-PACKARD computer system H 382 with colour monitor, disk drive, keyboard, optional printer – ZEISS software as follows: UMESS 300/MFT 300 with extension package, revision 1998, as well as 302 Form and Position Inspection, 303 Fitting Functions, 305 Automatic Operation, 307 Parameter Ctrl. Manager, and options Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Bore Pattern Program A 741 and Probe Check 99 – Mobile manual control panel with progressive control lever for continuously adjustable travel speed of the 3 axes – Probe magazine mounted on the machine, equipped with 3 probes, with probe change-over facility – Separate control and switch cabinet Type 608485, separate computer desk, separate cabinet – Operating manuals, various measuring probes, and table-mountable calibration ball/standard Podpfx Aast Hwqkoferc

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Na voljo je stara precizna okroglosmerna brusilka Carl Zeiss. Vključuje številne dodatke in orodja. Možen je ogled na lokaciji. Prodpfjw Ni Iuox Aafec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Pjdewyukdjpfx Aaferc Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm C99 control unit with operator panel VAST XT probe head 13-position probe changer magazine Probe change rack Probe accessories Calibration sphere Technical documentation Additional accessories HP workstation with monitor Calypso Basic software, current version Further options available upon request Available at short notice Delivery without the illustrated automatic feed system

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna višina: 83 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 340 mm, skupna dolžina: 240 mm, skupna masa: 4 kg, Oprema: dokumentacija / priročnik, For sale is a ZEISS ATOS Q 8M, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Quick setup and easy operation. Condition: Lightly used, mainly for trade fairs, exhibitions, and training purposes. Scope of delivery: - ZEISS ATOS Q 8M scanner with MV500 - Original accessories per standard configuration - Power supplies and cables - 10 m fiber optic cable - Tripod included - Transport case included - Laptop included - Windows 10 operating system - ZEISS INSPECT OPTICAL 3D ZEISS INSPECT OPTICAL 3D Free: - Open and edit new and existing projects - Import point clouds and polygon meshes - Creation, editing, and processing of polygon meshes - Element construction: standard geometries, points, sections, curves, surfaces, dimensions - CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY - Application of common alignment methods - Comparison with CAD with color deviation display - Dimensioning and form/position evaluation in accordance with ISO GPS and ASME Y14.5 Prodpew Nx D Eefx Aafjc - Reporting module Note: The device was used exclusively for demonstration, training, and presentation purposes, so signs of use are present. 3D acceptance certificate available. Furthermore, when purchasing the ATOS Q, we are also willing to trade in your old GOM systems.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 18355, For sale: PRO T compact measuring machine with two Pro T measuring units. The machine was professionally dismantled by ZEISS and stored in their facilities by ZEISS as well. Technical data: Surface: Measuring table: 7.38 m (L) x 3.06 m (W) x 0.63 m (H) Required floor space (room): 7.80 m (L) x 8.15 m (W) x 3.70 m (H) Machine data PRO T 1: - Zeiss Pro-T-Select Serial number: 181355 - Measuring range: X 7000, Y 1600, Z 2100 - System: Zeiss CSC with probe or optional Eagle Eye Navigator - Max. speed: axial < 150 mm/s, 3D < 260 mm/s tactile mode Software: Holos / Caligo (version 3.2.4 - 64 bit) Machine data PRO T 2: - Zeiss Pro-T-Compact Serial number: 181354 - Measuring range: X 7000, Y 1600, Z 2100 - Sensor: Zeiss RDS-CAA without Eagle Eye option - Max. speed: axial < 150 mm/s, 3D < 260 mm/s tactile mode Software: Holos / Caligo (version 3.2.4 - 64 bit) Prsdpfjuiyl Ujx Aafoc Please note: The superstructures are expressly NOT included in the sale.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.600 mm, merilno območje osi Y: 3.000 mm, merilno območje os Z: 1.000 mm, teža obdelovanca (maks.): 3.500 kg, trajanje garancije: 12 meseci, skupna višina: 4.000 mm, vrsta vhodnega toka: trifazni, skupna masa: 12.500 kg,

Stanje: generalkompletno obnovljen (rabljeno), Used, modernized 3D CNC Coordinate Measuring Machine. ZEISS Prismo 16 – Pre-owned system, configuration selectable on request Pjdpfx Aswptpkoaferc Measuring machine with moving bridge design Table plate made of granite Equipment can be customized to your individual requirements. Further details available upon request. Measuring range: X = 1600 mm – Y = 3000 mm – Z = 1000 mm Measurement uncertainty: depends on the selected measuring system Price: on request – please let us know your desired configuration >>> Single unit – available while stocks last

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Na voljo je natančen brusilni stroj za steklo Carl Zeiss za predhodno brušenje optičnih obdelovancev. Hitrost vretena obdelovanca: 125 obr/min, hitrost vretena orodja: 7000 obr/min, pomik: 6 mm/min, natančnost krožnosti in planosti: +/-0,005 mm, območje nihanja: 50°, dovoljena ponovljivost: +/-0,01 mm, izmerjena ponovljivost (1990): +/-0,005 mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Podpfx Aow Ni Izsafsrc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD with Rotary Table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Predjvdtzdspfx Aafec Technically and visually in very good condition Features and equipment: - C98 control system with BP26_SE operator panel - VAST GOLD sensor system - 13-position probe changer magazine - Probe change plate - Probe accessories - Calibration sphere - Reference probe - Workstation with monitor - Calypso Basic 5.2 software - Upgrade to current Calypso version and additional options possible - Complete retrofit with C99 and current Calypso version possible - Available at short notice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 1.300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201108502924, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, leto zadnje generalne obnove: 2025, Oprema: Na voljo je tipska ploščica, CNC Coordinate Measuring Machine ZEISS CONTURA G2 7/10/6 VAST XXT RDS-CAA Serial number: (201108502924) Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm The machine is in very good condition, Operating time approx. 1,300 working hours X-axis distance approx. 22 km Y-axis distance approx. 18 km Z-axis distance approx. 16 km Prsdswlhv Depfx Aafjc Length measurement error according to ISO 10360-2 for RDS/direct VAST XXT: MPE_E = (1.8 + L/300)µm, MPE_P = 1.8µm for RDS with RST-P/TP 20/200: MPE_E = (2.2 + L/300)µm, MPE_P = 2.0µm Scanning performance according to ISO 10360-4 for RDS/direct VAST XXT: MPE_THP = 3.5 µm within 68 s Device features, equipment: - Bridge-type measuring device in ceramic technology with fixed worktable - Table height approx. 850 mm - Integrated vibration damping - Scanning control via computer (ISC) in an external cabinet - Cabling prepared for RDS and direct VAST XXT multisensor technology Sensors/accessories: RDS-CAA base unit designed for Zeiss bridge-type measuring machines consisting of: RDS-CAA-select articulating joint with an adjustment range of +/- 180° in 2.5° increments, providing 20,736 usable positions. RDS-CAA select has a multisensor holder for tactile switching, scanning, and optical sensors. In CAA calibration mode the following sensors are supported: - ZEISS/Renishaw tactile switching probes (RST-P, TP2, TP6, TP20, TP200) - Zeiss VAST XXT TL3 scanning probe and XDT TL3 multipoint probe (including PS calibration module with Calypso CAA license).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 350 mm, teža obdelovanca (maks.): 280 kg, TECHNICAL DETAILS X-axis: 400 mm Prsdpfsvw Skwex Aafoc Y-axis: 500 mm Z-axis: 350 mm Workpiece weight: max. 280 kg Table size: 855 x 680 mm Control software: U-Soft Solid ultra Control unit: Dr. Schneider MACHINE DETAILS Total weight: 400 kg Dimensions (L x W x H): 1,100 x 1,100 x 2,000 mm

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Funkcionalnost: nefunkcionalno, številka stroja/vozila: 071811, merilno območje os X: 850 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 600 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 4.500 kg, vhodna napetost: 230 V, Used coordinate measuring machine Pedpfx Aasvdq R Nefsrc Measuring range (X/Y/Z): 850 x 1200 x 600 mm Measuring software: Without software Probe system: Zeiss ST Control unit: Without control Price valid for collection until 20.12.2024 Not in operation Purchased as seen

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, used, modernized 3D CNC coordinate measuring machine. The machine is fully modernized with REVO2, the new high-tech probe system from Renishaw, new controller, temperature compensation, new computer system with i7 processor, Windows 11 Pro operating system, and the latest version of the 3D software RationalDMIS V2025. Technical data: Measuring range: X = 1200 mm - Y = 2400 mm - Z = 1000 mm Measurement uncertainty: MPEE: 2.7+L/300 MPEP: 1.8 Psdjwptiwopfx Aaforc Each value applies under adherence to the environmental conditions specified by the manufacturer. Machine weight: approx. 7,250 kg Permissible workpiece mass: 2,500 kg External dimensions of the measuring machine: Length: 3540 mm - Width: 2050 mm - Height: 3770 mm (minimum room height 3870mm) Clear access around the machine: 600 mm on each side. The machine is set up for demonstration at our facility. We would be pleased to arrange an appointment for your visit, so we can demonstrate the performance of the system to you.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: 71795, merilno območje os X: 550 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 450 mm, skupna višina: 2.725 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 1.300 mm, skupna dolžina: 2.100 mm, skupna masa: 2.600 kg, vhodna napetost: 230 V, Used coordinate measuring machine Measuring range (X/Y/Z): 550 x 1200 x 450 mm Measuring software: Zeiss UMESS-UX Probe system: Zeiss ST Control unit: Zeiss C87 8-bit Price valid for collection until 20.12.2024 Prjdpfxsvd Df Tj Aafjc Not in operation Purchased as seen

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used, upgraded 3D CNC coordinate measuring machine. ZEISS Eclipse 700 – used system, equipment can be freely selected Measuring machine in moving bridge design Table plate made of granite Refurbished with new CNC control, new linear measurement system, probe system, new PC, and new 3D software running on Windows 11 Pro operating system. Podpfx Ajwakybeafjrc The configuration can be tailored to your specific requirements. Further details available on request. Measuring range: X = 700 mm – Y = 700 mm – Z = 580 mm Measurement uncertainty: MPEE (1): 2.4 + L/250 in compliance with the manufacturer’s specified environmental conditions. Image shows SP25 scanning probe. Price: on request – >>> Single unit – available while stocks last