Nove gume trenja kolesa

Zeiss

Stanje: zelo dobro (rabljeno), Zeiss coordinate measuring machine Type: O-INSPECT 442 Machine designation: Coordinate measuring machine Machine type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for simultaneous display of actual condition, nominal profile, and deviations, making measurement results very easy to recognize and interpret. General data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise level of the CMM: < 70 dBA Electrical data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Connection: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Rapid traverse speeds: Creep mode: SLOW function 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement mode Axis (X,Y): max. 200 mm/s Axis (Z): max. 50 mm/s Axis (3D): max. 287 mm/s Ambient conditions: For flawless operation of the coordinate measuring machine, the following conditions must be met. Ambient temperature for operational readiness: +17˚C to +35˚C Cgodpfezii Dhjx Agqew Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement operation: 20˚C ±1 K Altitude above sea level: 100-125 V: max. 3000 m ASL 230-240 V: max. 2000 m ASL Probe system: Probe system: CFS Probe types: Probe type: CFS 2mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface tilt relative to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface tilt relative to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface tilt relative to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflection properties of the workpiece surface. Rotary table: Weight and resolution Rotary table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular velocity, max.: 50˚/s Rotational speed: 8.3 min-1 Scope of delivery: In the standard version, the coordinate measuring machine type O-INSPECT is supplied with the following components: Coordinate measuring machine (CMM) Controller (integrated) Control panel PC with peripherals Software - CALYPSO 5.2 Documentation Probe system Reference stylus Calibration standard Calibration template Scope of delivery: (Zeiss coordinate measuring machine as pictured) Condition: used (Changes and errors in the technical data and information are subject to correction!) Please ask about transport options before purchase. Further questions? We would be glad to answer them for you by phone.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, največja višina reza: 400 mm, dolžina tračnega lista: 5.550 mm, širina tračne žage: 80 mm, dolžina mize: 800 mm, širina mize: 1.060 mm, delovna višina: 400 mm, - Italijanska izdelava - Ploščata tračna žaga za lamele - Neopremljena z barvo - Zelo dobro stanje - Rabljena žaga Žaga: - Premer koles: 800 mm - Največja širina tračnega lista: 80 mm - Največja višina reza: 400 mm - Glavni motor: 11 kW - Območje hitrosti podajanja: 2–40 m/min - Podajanje z pnevmatskim pritiskom na vodilo - Kovinski drsni vhodni valj - Dolžina tračnega lista: 5550 mm - Doseg traku – korpus: 780 mm Csdpfx Agow H Rq Hsqegw - Vijačno napenjanje traku - Dimenzije mizne plošče: 1060 x 800 mm - Nagibna delovna miza do kota: 15° - Premer odsesovalnega nastavka: 120 mm - Sistem vlaženja žage - Nožna zavora - Lita kolesa - Zagon zvezda/trikot - Napajanje: 380 V - Dimenzije (d/š/v): 1600 x 1100 x 2400 mm - Teža: 860 kg Podajalnik: - Kovinski, zobati podajalni valj - Pet stopenj hitrosti podajanja z menjavo jermena - Višina valja: 30 mm - Motor podajanja: 0,75 kW - Pritisk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201502530269, merilno območje os X: 700 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 600 mm, obremenitev mize: 560 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours Cedpfxsyzmbdo Agqegw For sale: ZEISS Contura G2 coordinate measuring machine with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT T1 scanning head. The device comes from a controlled laboratory environment, used exclusively on-demand on a single shift, and never integrated into a production line – resulting in exceptionally low actual running hours and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Commissioning: 2016 Technical and visual condition: perfect Measurement error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning head ✅ Probe rack/magazine ✅ Set of measurement styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control panel 🔹 Usage History Device operated exclusively in laboratory mode Occasional, project-based use (on-demand) Single shift, no serial or production operations As a result, the machine exhibits extremely low mechanical wear 🔹 Service & Calibration ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance according to manufacturer’s guidelines ✅ No third-party interventions ✅ Fully functional device 🔹 Status 📍 Device available immediately 🔍 Demonstration possible 📄 Complete documentation ✅ Transport to be arranged by the purchaser

Stanje: dober (rabljeno), Invertni mikroskop Zeiss Primovert (SN: 3841010097) Cgedpfjzhidrox Agqjw Okularji WF 10x/20 Zeiss Primo Plan-Achromat 4x/0,10 Zeiss Primo Plan-Achromat 10x/0,25 Ph1 Zeiss Primo Plan-Achromat 20x/0,30 Ph1 Zeiss Primo Plan-Achromat 40x/0,50 Ph1 Fazni vstavek Ph1 / 0,3 Zaščitni pokrov proti prahu

Stanje: novo, Leto izdelave: 2026, Long, cast-iron, polished and ground jointer tables made of grey cast iron ensure precise planning operations. Robust, durable, space-saving, and carefully engineered design. High-quality products that make woodworking truly enjoyable. The PT310 model is equipped with a more powerful motor, allowing for greater precision and faster processing. The Cormak planer-thicknesser features a solid, well-designed construction that offers extensive adjustment capabilities and mechanical processing of both hard and softwood. Adjustments are straightforward, and switching from planer to thicknesser function takes just a few seconds. The machine weighs 250 kg, and when combined with the ground cast-iron tables, this ensures excellent stability for safe operation. Additional rubberized feet enable vibration-free operation. VERSION WITH THE MOST POWERFUL ENGINE ON THE MARKET with a total power output of 4.2 kW! The PT310 planer-thicknesser stands out with an exceptionally powerful S6 4.2 kW (S1 3.0 kW) engine—significantly more than competing machines—resulting in higher productivity and operational stability. Cgjdpfx Agovxh Rveqsw A more powerful motor guarantees stable performance and effortless machining of hard materials: Hardwood requires greater force for proper processing, and this strong motor handles it with ease. - Switching from jointer to thicknesser mode is very quick and easy. Simply release the excenter locks, lift the tables, and move the extraction hood. - The thickness adjustment handwheel is conveniently located on the right side of the machine. - The aluminum tilting fence with scale bar allows for precise angle adjustment from 90° to 45°. - The thicknessing table is centrally mounted on a column and features an up/down adjustment handwheel. - Planing height is measured using a scale bar. Technical specifications: Cutterhead diameter: 70 mm Cutterhead speed: 5,500 rpm Suction port diameter: 120 mm Tilting fence angle: 0°–45° Number/size of knives: 3 / 310x25x3 mm Max. surfacing width: 310 mm Max. thicknessing width: 308 mm Max. planing height: 5–225 mm Max. thicknesser cutting depth: 2.5 mm Max. jointer cutting depth: 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L x W): 1,300 x 310 mm Gross weight: 250 kg Motor speed: 2,800 rpm Motor power: S1 3.0 kW – S6 4.2 kW Power supply: 400V, 5-pin socket, 16A

Stanje: rabljeno, Originalni nosilci tipal in podaljški za tipala ZEISS CMM Originalni ZEISS nosilci tipal Podaljški za tipala Različne zvezdaste in ravne sonde Kot je prikazano na slikah Stanje: Rabljeno Dobro delujoče stanje Skrbno odstranjeno iz delujočega ZEISS CMM Idealno za uporabnike ZEISS CMM, ki iščejo originalno nadomestno ali dodatno mersko opremo. Cjdpfozg Eczox Agqsgw

Stanje: zelo dobro (rabljeno), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external data and image transfer. This allows users to quickly and easily obtain detailed information about the composition and morphology of specimen surfaces down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both macrostructure and microstructure analysis are possible. The application range can be significantly extended with special accessories, enabling, for example, analytical investigations in microscopic surface areas. The device can be operated either via conventional control elements or a keyboard and mouse (optional). Electron optics and vacuum control use conventional operation. Image memory functions are controlled via the keyboard or mouse (optional). Centrally positioned on the control panel is a separate info screen for menu display. Csdpfezdthyox Agqjgw This manual is intended as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide all users, including those with limited experience, with necessary guidance. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted sample 25 nm - guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted sample 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, un-tilted sample Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Specifications and technical details subject to change and error!) Please inquire about transport options before purchase. For further questions, feel free to contact us by phone.

Stanje: novo, Leto izdelave: 2025, *JCB TM220 SV C New Vehicle* - JCB Diesel by Kohler [55kW/74hp] - Emission Stage V with DPF - Lifting height: 4.56m - Rated load capacity: 2,200kg - 2-speed hydrostatic drive - 20km/h - Tyres: GOODYEAR POWERLOAD 300/70R20 - Comfort cab (ROPS/FOPS) - Radio pre-installation - Adjustable steering wheel - Fully opening windows - Heating - SELF-LOCKING DIFFERENTIAL FRONT AND REAR Front axle = 45% Rear axle = 25% - Servo single-lever control - Euro quick coupler - Fork carriage with pallet fork 1,345mm - LED work lights front/rear/boom - Yellow rotating beacon - Armrest right & left - Windscreen wiper on roof Ready for immediate use, many more attachments in stock. A viewing appointment is expressly preferred. On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! BSS, quick coupler, road approval = Further information = Cgjdsyfvztopfx Agqjw Please contact Tobias Ebert for more information.

Leto izdelave: 1990, stanje: rabljeno, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Cgedpot Hwqkofx Agqjw Refurbished: 2000 X-axis as longitudinally traversing portal: 850 mm Y-axis cross slide within portal: 1,200 mm Z-axis as measuring head quill (vertical) approx.: 600 mm Clearance between portal sides approx.: 1,000/1,080 mm Vertical clearance approx.: 750 mm Total table size approx.: 1,000 x 2,100 mm Table height above floor approx.: 850 mm Overall machine height approx.: 3,050 mm Weight approx.: 3,800 kg Special equipment / Accessories: – Granite plate as measuring table and crossbeam, vibration-dampened – Measuring 3D probe head for accommodating 5 different probe inserts and for SCANNING operation for continuous data acquisition, resolution 0.1 µm – Path control for 3 axes simultaneously – HEWLETT-PACKARD computer system H 382 with colour monitor, disk drive, keyboard, optional printer – ZEISS software as follows: UMESS 300/MFT 300 with extension package, revision 1998, as well as 302 Form and Position Inspection, 303 Fitting Functions, 305 Automatic Operation, 307 Parameter Ctrl. Manager, and options Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Bore Pattern Program A 741 and Probe Check 99 – Mobile manual control panel with progressive control lever for continuously adjustable travel speed of the 3 axes – Probe magazine mounted on the machine, equipped with 3 probes, with probe change-over facility – Separate control and switch cabinet Type 608485, separate computer desk, separate cabinet – Operating manuals, various measuring probes, and table-mountable calibration ball/standard

Leto izdelave: 1995, stanje: rabljeno, x-axis travel: 9,200 mm y-axis travel: 1,600 mm z-axis travel: 2,400 mm Test piece diameter: mm Working area: mm Centre distance: mm Control: ZEISS C 99 Total power requirement: kW Machine weight approx. 30 t Required floor space approx. 10 x 3.6 m ZEISS - STIEFELMAYER Double-sided CNC traversing 3D measuring machine Type: SMM Duplex / Eagle Eye Year of manufacture: 1995, but repeatedly modernized Measuring stand working range: X axis (horizontal): approx. 9,200 mm Y axis (transverse): approx. 1,600 mm / 3,200 mm Csdpfjt Hwwksx Agqogw Z axis (vertical): approx. 2,400 mm Measuring plate dimensions (4-piece): 10,000 x 3,500 mm External dimensions of the measuring plate incl. guide rails: 10,000 x 3,650 mm Measuring plate thickness: approx. 450 mm Height of measuring plate above floor: 650 mm Max. traverse speed: approx. 150 mm/sec Total weight: approx. 30,000 kg Special features / accessories: • Left and right: measuring stands system C / SMM mounted laterally, laterally adjustable along the measuring plate, with column cross-section for vertical adjustment 160 x 160 mm and cantilever arm cross-section for horizontal adjustment approx. 80 x 80 mm • Machine/CNC control type ZEISS C 99, one unit per measuring stand • Mounted probe head type RST-P with DSE rotary and swivel joint and CAA correction, as well as a reference probe, collision protection • EAGLE EYE Navigator for optical measurement, especially of vehicle bodies and other pressed parts, provides significant time savings; retrofitted in 2007 • Probe changing station for 8 probes, mounted at the front on the plate • Measuring plate made of special cast iron, divided into 4 plates = 4 x 5,000 x 1,750 mm, with height-adjustable leveling feet approx. 250 mm high in sufficient quantity • T-slots along the y-axis ±500 mm and various precision bores with threads at specified intervals. Y = ±300 / 700 / 1000 mm Machine is delivered WITHOUT appropriate SOFTWARE! (Remains at factory), without operator panels, and without calibration standards (spheres) Condition: Good to very good – ideal for measuring large automotive body parts Delivery: Ex stock – as inspected (without software & operator panels) Payment: strictly net – upon receipt of invoice We look forward to receiving your order.

Stanje: novo, Brugger HX14 Chipper – Compact, Powerful, and Ready for Use Anywhere! The Brugger HX14 chipper combines maximum performance with impressive mobility. With its robust 25 HP petrol engine and the capability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding horticultural and landscaping projects. Thanks to its compact design and road approval, the HX14 can be quickly and easily transported anywhere – whether to gardens, construction sites, or remote work locations. Efficiency and flexibility in a single device! Your advantages at a glance: • Powerful: 25 HP petrol engine for robust chipping • High capacity: Processes branches and trunks up to 14 cm in diameter • Compact design: For easy handling and space-saving transport • Mobile and flexible: Supplied with trailer and road approval – ready for use anywhere • Ideal for professionals and demanding projects: Reliable and durable for daily operation The Brugger HX14 – Your high-performance partner for maximum mobility and efficiency! Technical data: • Dimensions: 274 x 125 x 175 cm (L x W x H) Cjdpfjvpfutex Agqjgw • Weight: 383 kg • Blades: 2, 36 cm wide • Max. diameter: 14 cm • Throughput/hour: 10-14 m³/h • Feed hopper at drum: 36 x 14 cm Contact us for a customized offer!

Stanje: rabljeno, Leto izdelave: 2005, Velika koordinatna merilna naprava (CMM) ZEISS PRO T SELECT na voljo za takojšnjo prodajo. Stroj je bil prej nameščen v profesionalnem meroslovnem laboratoriju in je bil strokovno demontiran. Shranjen je v pokritem prostoru in je pripravljen za pošiljanje. Tehnične specifikacije * Proizvajalec: ZEISS * Model: PRO T SELECT * Leto izdelave: 2005 * Serijska številka: 131860 * Jeklena merilna miza: 4000 × 3000 mm * Merilni sistem: indeksirna merilna glava Renishaw RDS-CAA * Kalibracija v skladu z DIN EN ISO 10360 * Zadnja kalibracija ZEISS izvedena leta 2025 (dokumentacija na voljo) * Popoln stroj * Notranje skladiščenje * Pripravljen za takojšnje natovarjanje in svetovno pošiljanje Vključeno v ponudbo * Popolna merilna naprava ZEISS PRO T * Merilna glava Renishaw RDS-CAA * ZEISS kalibracijska dokumentacija (2025) * Razpoložljiva tehnična dokumentacija (na zahtevo) Cgedpszga D Hsfx Agqsw Dodatne informacije Stroj je na voljo za ogled po dogovoru.

Stanje: rabljeno, Dial gauge Passameter Cgsdpfoda Abaox Agqow Manufacturer: Zeiss Jena Measuring range: 0-25 mm in wooden case

Stanje: novo, WM5150 ROGI Bed-Type Milling Machine 400V-3Ph Motor ----- 2.4 kW Vertical Speed Range ----- 94 ~ 2256 rpm Spindle Taper ----- ISO 40 Table ----- 1220 x 360 mm Quill Stroke ----- 180 mm Quill Feed ----- 0.1 / 0.15 / 0.3 mm/rev Longitudinal Travel (X) ----- 600 mm Cross Travel (Y) ----- 360 mm Vertical Travel (Z) ----- 500 mm Overhang ----- 370 mm Spindle Head Swivel Range ----- -45 to +45 degrees Distance Spindle/Table ----- 110 - 610 mm Feed Range Longitudinal/Cross ----- (8) 24 - 720 mm/min Weight ----- 1800 KG INCLUDES: * 3-axis digital readout by SINO * Automatic table feed X, Y * Automatic spindle feed Cedpfxsga T Dwj Agqegw * LED lighting * Coolant system * Deluxe control cabinet * Toolbox with various tools

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, 3D Coordinate Measuring Machine / CNC Coordinate Measuring Device| Manufacturer: MAUSER/ZEISS | Model: KMZ-G 602520 | Year of Manufacture: 1988/2003 Optionally available including the climate-controlled hall. The machine has been regularly calibrated by ZEISS. Last calibration was performed on 07.08.2025, next calibration (recommended) for 08/2026. Cedpfx Aoy Iub Ssgqogw TECHNICAL DATA: Measuring ranges (LxWxH): 6,000 x 2,500 x 2,000 mm Travels: - X-axis: 6,000 mm - Y-axis: 2,500 mm - Z-axis: 2,000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5.0 + L/250)µm, V2 = 3.5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5.0 + L/250)µm - Environmental conditions to maintain specified accuracy: * Temperature range: 21°C +/- 3K * Temperature fluctuation: 0.5K/h, 1.0K/d, 0.5K/m - Environmental conditions for operational readiness: * Temperature range: +15°C to 35°C * Humidity: 30 to 70% General features, equipment: - Gantry-type measuring device with ultra-precise guideways and recirculating ball shoes - 2nd Y-axis with granite guideway and air bearings - High-resolution Zeiss scales - Positive-fit drives in all 3 axes - Collision protection for the quill and probe head (with VAST-TK) during manual and setup operation - Safety position for crane locking - Scale temperature compensation - Microcomputer control - Practice part: cube, star probe - Reference probe: D = 8 mm, length: 115 mm - Calibration standard: D = 30 mm - incl. basic software package - Load capacity: only limited by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation No guarantee for completeness or accuracy of technical details and equipment. – Subject to prior sale –