Koordinatni merilni stroj

Zeiss Pro

Stanje: potreben popravila (rabljeno), Leto izdelave: 2007, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 135414, merilno območje os X: 4.200 mm, merilno območje osi Y: 1.600 mm, merilno območje os Z: 2.100 mm, model krmilnika: C99, Stroj trenutno ni delujoč. Okvare so na Y-osi in Z-osi. Podrobnosti so navedene v priloženem servisnem poročilu in kalibracijskem certifikatu. TEHNIČNE PODROBNOSTI Merilno območje X: 4.200 mm Dusdpfjytc Dqjx Aplet Merilno območje Y: 1.600 mm Merilno območje Z: 2.100 mm Merilna plošča: 5.000 x 1.800 mm Kalibriran merilni volumen Smer X: 4.200 mm Smer Y: 1.600 mm Smer Z: 1.600 mm PODROBNOSTI O STROJU Krmiljenje: C99 OPREMA Merilna glava: TP20 #5M2409 Merilna programska oprema: CMM-OS 5.4.00 CAA datoteka: 03.06.2025 Kalibracijska krogla: #134983 Opomba: Merilni računalnik HP Z420 Windows 7 je po potrebi možno priložiti. Zaradi hekerskega napada je okužen z virusom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V Dodpfx Aoylw Stoplout • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Stanje: rabljeno, Leto izdelave: 2014, Merilni stroj Zeiss CMM Pro T2 advance 16/21, letnik 2014, v zelo dobrem stanju. Dujdew D R Nqepfx Aplst • Numerična upravljalna plošča, standard • Dimenzije osnovne plošče: Dolžina: 4.000 mm Širina: 2.000 mm Višina: 640 mm Skupna višina naprave cca 4.500 mm • Merilno območje: X-os: 3.200 mm Y-os: 1.600 mm Z-os: 2.100 mm • Dovoljena teža obdelovanca: cca 5.000 kg Programska oprema: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Odstopanje merjenja dolžine po ISO 10360-2: MPE-E = (27 + L/80) μm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 133084, merilno območje os X: 3.000 mm, merilno območje osi Y: 1.600 mm, merilno območje os Z: 2.100 mm, Coordinate measuring machine Carl Zeiss Pro T compact 3D TECHNICAL DETAILS Controller: C99S / FW: 19:05 Probe head: RDS CAA No. 165: TP20 Measuring software: CMM-OS 5.4.12 Reference sphere: 13320 r=15.00000 Dujdpfjyclnksx Aplet Measuring range: 3,000 x 1,600 x 2,100 mm CMM expansion coefficient X: 11.9 x 10⁻⁶ K⁻¹ CMM expansion coefficient Y: 11.9 x 10⁻⁶ K⁻¹ CMM expansion coefficient Z: 10.4 x 10⁻⁶ K⁻¹ Holos software version: Holos 2.10 SP23 Rev. 3712 CMM-OS software version: CMM-OS 5.4 MACHINE DETAILS Length: 3,500 mm Width: 2,030 mm Height: 3,600 mm Calibration certificate and maintenance schedule from 2022 available.

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") Dodew Intaepfx Aplout U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Leto izdelave: 2004, stanje: dober (rabljeno), Technical Data Type: Pro Select Manufacturer: Zeiss Year of manufacture: 2004 The machine can be fitted with new software and control system according to customer requirements. Measuring Range X = 14,000 mm Y = 3,080 mm Z = 3,000 mm Measuring Accuracy U3 Duplex = (68+L/35)μm ≤ 150μm Probe Head Probe head: Renishaw MIH Measuring probe: Renishaw TP6 Software Configuration Holos NT 2.4.22 The machine can be supplied with new software upon customer request. Other Features Duedpfob Twi Nsx Aplot Double-column design Set-up and commissioning by our service partners is available. Price: On request We would be happy to provide you with a detailed quotation. Note: Our offer is intended exclusively for professional buyers. (Specifications, figures, and prices subject to change, prior sale reserved, and errors excepted!)

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), številka stroja/vozila: 149720, Technical Data Manufacturer: ZEISS Model: Pro T-Premium Year of manufacture: 2008 Single-column CMM (Coordinate Measuring Machine) Serial number: 149720 Measuring Range X = 3000 mm Y = 1800 mm Z = 2100 mm Equipment Touch-trigger probes C99 controller Software: CMMOS, Caligo Holos 3.0, DMIS The machine can be upgraded with new accessories according to customer requirements. Price: on request! Assembly and commissioning available! Dujdpfx Aef S A Aioplot We would be happy to provide you with a detailed quotation. Note: Our offer is exclusively aimed at professional clients. (Subject to change and errors in technical data, specifications, and prices. Prior sale reserved!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Na voljo je stroj za brušenje navojev in polžev Reishauer AG. Dolžina brušenja: 450mm, vpenjalna dolžina: 700mm, maks. premer brušenja: 200mm, maks. korak: 80mm, maks. teža obdelovanca: 100kg, maks. kot koraka: +/-25°, premer brusilnega kamna: 275mm/350mm, hitrost vrtenja: 1850o/min. Dimenzije stroja X/Y/Z: pribl. 2600mm/1800mm/1600mm, teža: pribl. 3400kg. Vključen je oljni centrifugator, pokrov, sistem za odsesavanje oljne meglice in razna dodatna oprema. Zaščitna zavesa proti brizganju je nekoliko otrdela. Dokumentacija je na voljo. Ogled na lokaciji je možen. Djdpfx Apsx Dm Dnelout

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 149616, pomik osi Y: 1.600 mm, pomik po osi Z: 2.500 mm, Oprema: Na voljo je tipska ploščica, Tehnični podatki Proizvajalec: Zeiss Tip: Pro T Compact Serijska št.: 149616 Leto izdelave: 2008 2 merilni roki Merilna plošča Širina: 3.000 mm Globina: 6.000 mm Pomiki Y-os: 1.600 mm Dodpexnrumsfx Apleut Z-os: 2.500 mm Oprema 2 x upravljalna PC (FTSD0026; FTSD0029) 4 x 24" monitorji proizvajalca Eizo 2 x tipkovnica 2 x miška razni dodatki Cena: na zahtevo! Opomba: Naša ponudba je namenjena izključno strokovnim kupcem. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, navedbah in cenah ter vmesne prodaje!)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Workpiece probe Tool measurement Laser tool control (optional) High-pressure coolant supply 7 MPa (optional) Chip conveyor Djdpfx Apjxizdajlout Fully enclosed with roof Dimensions: n/a Weight: n/a Connection data: n/a