Rover nakup rabljenega (115)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 1000012445, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.600 mm, pomik osi Y: 1.800 mm, skupna masa: 4.000 kg, TECHNIČNI PODATKI Delovno območje X-os: 3.600 mm Delovno območje Y-os: 1.800 mm Število delovnih polj: 2 Pozicije za menjavo orodja na hrbtni strani: 16 Pozicije za menjavo orodja na stroju: 8 Vakuumska črpalka: 250 m³/h Vrtalna glava BH 10 z razporeditvijo: 15 vertikalnih vreten na osi X 17 vertikalnih vreten na osi Y PODROBNOSTI O STROJU Moč elektrovretena: 13,2 kW Tip elektrovretena: ISO 30 Krmiljenje: numerično krmiljenje s programsko opremo B-Solid Teža: 4.000 kg OPREMA Nesting delovna miza Avtomatski nakladalni sistem s stransko dvižno mizo Sistem za tiskanje etiket z avtomatsko aplikacijo na nakladalni mizi Sistem za razrez plošč s priseski Avtomatski razkladalni sistem z motoriziranim trakom Sistem za čiščenje delovne mize Zaščitni in varnostni sistem z ograjo Varnostni sistem z odbojniki Avtomatski mazalni sistem Klimatski sistem za hlajenje in čiščenje krmiljenja stroja Lodjydk Aispfx Ab Tori

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 94464, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.400 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 155 mm, model krmilnika: XNC Numerical Control, TEHNIČNE PODROBNOSTI Delovno območje X-os: 3.400 mm Delovno območje Y-os: 1.300 mm Delovno območje Z-os: 155 mm Število delovnih polj: 2 Pozicije stranskega menjalca orodij: 3 Pozicije verižnega menjalca orodij: 20 Razpored vrtalne glave: 10 vertikalnih svedrov, X-os 12 vertikalnih svedrov, Y-os 6 horizontalnih svedrov, X-os 2 horizontalna svedra, Y-os PODROBNOSTI STROJA Krmiljenje: XNC Numerical Control Tip vertikalnega vretena: C-os Vector, Iso 30 stožčasti priključek OPREMA Sesalna črpalka 8 ročno nastavljivih palic za podporo priseskov z indikatorjem 8 pnevmatskih bakelitnih letvic za dvigovanje plošč Lrsdpfxsydkkgs Ab Tji 3 ročno nastavljive prisesalne čaše na palico Sprednji zaščitni in varnostni sistem z zaščitnimi preprogami Popolna zaščitna ograja Motorizirana preproga za odvod odrezkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, številka stroja/vozila: 57269, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.205 mm, model krmilnika: NC 1000, DÉTAILS TECHNIQUES Lrsdpfx Aboydkdge Tei Zone de travail axe X : 4 300 mm Zone de travail axe Y : 2 205 mm Broche verticale : 1 pièce, HSK F63 Changeur d’outils : 8 positions (tête) Changeur d’outils : 21 positions (arrière, à chaîne) Tête de perçage : BH 20 Broches verticales sur l’axe X : 8 pièces Broches verticales sur l’axe Y : 8 pièces Broches horizontales sur l’axe X : 4 pièces Broches horizontales sur l’axe Y : 4 pièces Unité de scie sur l’axe X : Diamètre 120 mm Unité de scie sur l’axe Y : Diamètre 120 mm DÉTAILS DE LA MACHINE Commande : NC 1000 Logiciel : Biesse Works Poids : 400 kg ÉQUIPEMENT Table nesting FT à surface complète Système de chargement automatique avec table élévatrice latérale Machine d’étiquetage automatique pour impression de codes-barres Système automatique d’impression et de dépose d’étiquettes adhésives Système de déchargement automatique avec bande transporteuse motorisée Système de protection frontale et de sécurité avec tapis et grillages Système de lubrification automatique Climatisation pour l’armoire électrique Pompe à vide

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm -Masa (teža) pribl. 6100 kg Lrsdew Rpd Sjpfx Ab Tsi -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Cena po dogovoru, na voljo takoj. Cena je brez DDV.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), Glavni pogon Moč motorja vretena: 13,2 kW Hitrost vretena: 24.000 vrt/min Število osi: 3 Premiki Pomik po osi X: 3765 mm Pomik po osi Z: 378 mm Pomik po osi Y: 1560 mm Lsdpfxex Nr Npo Ab Tori Ta 5-osni BIESSE Rover PLAST A FT 1536 je bil izdelan leta 2020 in ima robustno elektro-varjeno osnovo ter visokonatančne pogonske sisteme. Ponaša se z glavnim elektrospindlom z močjo 13,2 kW, programirljivo hitrostjo vrtenja do 24.000 vrt/min in revolverskim menjalcem orodij z osmimi pozicijami. Idealno za zahtevno obdelavo lesa, vključuje 21,5'' LCD monitor in integracijo z Industry 4.0. Izkoristite priložnost za nakup CNC stroja za obdelavo lesa BIESSE Rover PLAST A FT 1536. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Stanje: rabljeno, Leto izdelave: 2010, Biesse Rover A 3.40 FT K2 Beschreibung: Arbeitsbereiche: X = 3.685 mm; Y = 1.290 mm; Z = 160 mm Automatisches Schmiersystem FT-Arbeitstisch 4 vordere und 4 hintere Anschläge, pneumatisch gesteuert und mit Sensoren ausgestattet 4 Seitenanschläge, pneumatisch gesteuert und mit Sensoren ausgestattet Vakuumtank 300 m³/h Drehkrallen-Vakuumpumpe 12 kW (16,1 PS) Elektromotor mit ISO 30 Adapter, luftgekühlt Lrodpfxjxwcb No Ab Tji Blaseinheit Flansch zur Montage von Aggregaten auf der Spindel Vorbereitung für ein Bearbeitungsgerät mit 360° Interpolation und Getriebeantrieb Bohrkopf BH 21 L Revolver-Werkzeugwechsler mit 18 Plätzen Vorbereitung zum Einbau eines automatischen Entladesystems für nestbasierte bearbeitete Platten Steuerung über Fernbedienung Numerische Steuerung XP600 BIESSEWORKS – Fortschrittliches Programmiersystem – Maschinenversion BIESSE NEST Modul Klimaanlage für Schaltschrank Frequenzumrichter Sicherheitseinrichtungen mit Sicherheitsmatten Vorbereitung für mechanisches Abtastsystem (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher. Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: rabljeno, Leto izdelave: 2008, Biesse Rover A 3.40 FT K2 Numerisch gesteuertes Bearbeitungszentrum ROVER A 3.40 FT K2 Arbeitsbereiche: X = 3685 mm; Y = 1290 mm; Z = 160 mm Ausstattung: Automatisches Schmiersystem FT-Nestingtisch 4 vordere Anschläge + 4 hintere Anschläge, pneumatisch betätigt und mit Sensoren ausgestattet 4 seitliche Anschläge, pneumatisch betätigt und mit Sensoren ausgestattet Lredpfxjx Afvte Ab Toi Vakuumpumpe 300 m³/h 12 kW (16,1 PS) Elektrohspindel mit ISO 30 Adapter, luftgekühlt Blaseinheit-Flansch für die Aufnahme von Aggregaten an der Elektrohspindel Vorrüstung für Bearbeitungsaggregate mit 360°-Interpolation und Getriebeantrieb Bohrkopf BH 21 L Revolverkettentauschsystem mit 18 Werkzeugplätzen Vorrüstung zur Montage des automatischen Ausschleusgeräts für nestbasierte Werkstückbearbeitung Bedienelemente am Fernbedienungspanel Numerische Steuerung XP600 BIESSEWORKS BIESSE NEST Modul Klimaanlage für den Schaltschrank Umrichter Sicherheitsvorrichtungen mit Druckmatten (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: novo, Leto izdelave: 2022, Travels (X,Y,Z): 3100 x 2205 x 170 mm Number of spindles, vertical drilling head: 0 Number of spindles, horizontal drilling head: 0 Number of tools: 14 Extraction port diameter: 200 mm Number of milling units: 1 Year of manufacture: 2022 Spindle speed: 24,000 rpm Compressed air connection: 7 bar Motor power: 9 kW Pump capacity: 2x 250 m³/h Control system: BH660 CNC Processing Center BIESSE Rover PLAST K 2231 FT – BRAND NEW / STOCK MACHINE in original packaging! Working area: X: 3100 mm Y: 2205 mm Z: 170 mm Safety system: FullBumper – accessible from all sides, no safety fence required Vacuum system with 8 zones 2x 250 m³/h vacuum pumps 9 kW 3-axis milling spindle Prepared for retrofitting of the C-axis (4th axis) Lrjdpfxexfwduo Ab Tei No drilling head included! Movable side tool changer with 14 positions Air-Jet cooling system (Picture shows sample image!) ORIGINAL PACKED NEW MACHINE! New machine warranty! Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels

Stanje: novo, Leto izdelave: 2022, Travel ranges (X,Y,Z) 6735 x 1930 x 245 mm Number of spindles vertical drilling head: 0 pcs. Number of spindles horizontal drilling head: 0 pcs. Number of tools: 39 pcs. Extraction nozzle diameter: 2x 250 mm Number of milling units: 2 pcs. Year of manufacture: 2022 Speed: 18,000 / 24,000 rpm Compressed air connection: 7 bar Motor power: 16.5 / 19.2 kW Pump capacity: 250 m³/h Control system: BH660 CNC Machining Centre BIESSE Rover B 1967 – BRAND NEW / STOCK MACHINE in original packaging! Working area: X = 6735 mm Y = 1930 mm Z = 245 mm with modules H = 74 mm Z = 290 mm with modules H = 29 mm (milling operation) Workpiece pass-through in Y: 1930 mm, with a thickness up to 60 mm on modules H = 74 mm; 1880 mm, with a thickness over 60 mm on modules H = 74 mm. Double-Y axis for 5-axis and 4-axis spindle (enables tool change during hidden time) Safety system with bumper and light barriers – 3-sided safety enclosure Uninterruptible power supply (UPS) 10 traverses – 30 base carriages Multiple clamping area automatic table positioning FPS HyperClamp clamping system 3 alignment rows 8 loading aids 250 m³/h vacuum pump Chip conveyor belt 5-axis spindle with 16.5 kW – 18,000 rpm Deflector preparation Unit interface 4-axis spindle with 19.2 kW PeakPower – 24,000 rpm C-axis separate Y-axis for 5-axis and 4-axis no drilling head! Turret changer travelling with 4-axis, with 8 positions Front turret changer for 5-axis, with 8 positions Saw pickup front for 5-axis Chain changer rear with 22 positions (Photo is for illustration purposes only!) BRAND NEW MACHINE IN ORIGINAL PACKAGING! Full manufacturer’s warranty! Lrodpfx Asxf Dwzjb Tji Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels

Stanje: rabljeno, Ferwood Code: RU0000986 – Condition: Used – Compatible Machine: CNC BIESSE ROVER – If interested, we offer refurbishment services. Please contact us. Lsdevazkfopfx Ab Tjri

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 140 mm, število mest v zalogovniku orodij: 7, proizvajalec krmilnikov: XNC, hitrost pomika os X: 75 m/min, hitrost podajanja osi Y: 75 m/min, hitrost podajanja os Z: 15 m/min, moč vretenovega motorja: 11.000 W, število vreten: 1, največja hitrost vretena: 24.000 obr/min, hitrost vretena (min.): 1.000 obr/min, Oprema: CE označba, dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Biesse Rover 23 lesno-obdelovalna postaja – popolnoma opremljena Stroj je še vedno v uporabi, 1 do 2 dni na teden, zaradi prenehanja dejavnosti na Slovaškem pa je naprodaj. Vedno dobro vzdrževan. Ljdpfx Abjw S Edwo Tjri ✅ Visoka zmogljivost Rezkalno vreteno s keramičnimi ležaji (11 kW) Nastavljiva hitrost: 1.000 – 24.000 obr/min Vrtalna glava z 10 navpičnimi in 6 vodoravnimi svedri Krožna žaga na osi X ✅ Učinkovitost & prilagodljivost Pnevmatsko nastavljivi vakuumski kalibri v 6 vrstah, 3 na vrsto Vakuumska črpalka 100 m³ Shranjevalnik orodja s 7 mesti (ISO 30) Vključuje vse adapterje in orodja ✅ Uporabniku prijazno Transportni trak za avtomatski odvod odrezkov Takoj pripravljen za uporabo, popolnoma opremljen 📍 Stroj se nahaja na Slovaškem, razstavljanje in prevzem na kraju samem je treba opraviti samostojno.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: nepreverjeno, 24 vertikalnih vreten, 10 horizontalnih vreten, 7-pozicijski menjalnik orodij, 8 vakuumskih delovnih miz z digitalnim prikazom položaja, zamenljiv kotni menjalnik. Uporabna dolžina delovne površine: 3200 mm, širina delovne površine: 925 mm. Lrsdsx Iulwopfx Ab Toi

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Lrsdov Aacfepfx Ab Toi Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software – 3D CAD/CAM program for designing, simulating, and managing processes. Machining of machining centers and drilling machines by Biesse. BNest software – software module for processing in nesting mode, allowing you to create projects. Includes a list of items with required production quantities and a list of sheets to be used, with the aim of minimizing material usage and machining times. Working area in X-axis: 4,300 mm Working area in Y-axis: 2,200 mm Number of working fields: 2 Nesting worktable Automatic loading system with side lift table Panel separation system with 2 suction cups No. 1 vertical 3-axis electrospindle, 13.2 kW, with automatic tool changer, HSK cone type Automatic tool changer system with 16 positions – located at the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - 5 vertical in X-axis - 5 vertical in Y-axis Lredpfx Ast Ul Dnob Tsi Automatic unloading system with motorized conveyor belt Worktable cleaning system Printing and application system for adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter fences Safety system with bumpers Automatic lubrication system Air conditioning system for cooling and cleaning machine control unit No. 2 vacuum pumps, 250 m³/h each Installed power: 31 kW

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Nominal payload: 210 kg * Machine weight: 1267 kg Lrjdpfx Askvrxujb Tji * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Lredpfx Ajwt Snyeb Toi Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting Ledpfx Abow D Dhao Tori 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Stanje: rabljeno, Numerical control NC 1000, software: Biesse Works. Working area on X-axis: 3685 mm; working area on Y-axis: 1290 mm; Z-axis stroke: 200 mm; component passage height: 70 mm. FT full plane nesting worktable. Automatic loading system with side lifting table. 1 vertical electrospindle with automatic tool change. Automatic tool changer with 18 positions, located at the rear of the machine. Drilling head with independent spindles arranged as follows: 7 vertical on X-axis, 7 vertical on Y-axis, 2 horizontal on X-axis, 2 horizontal on Y-axis. Automatic unloading system with motorized belt. Front safety and protection system with mats and limit nets. Automatic lubrication system. Air conditioning for the control panel. Vacuum pumps. TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE. Lsdpfxowufv Ts Ab Tjri

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. bSolid - 3-axis machining. bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. Lodpfxsw D E A Ee Ab Tori • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...

Stanje: rabljeno, Leto izdelave: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working range on X-axis: 3228 mm Working range on Y-axis: 1580 mm Working range on Z-axis: 200 mm with suction cups H74 mm Working range on Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support bars Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for the bar Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm Automatic 16-position tool changer on X-axis carriage Independent Tesa BH17 drilling spindles arranged as follows: No. 5 independent spindles for vertical drilling in “X” direction No. 5 independent spindles for vertical drilling in “Y” direction No. 4 spindles for horizontal drilling in “X” direction No. 2 spindles for horizontal drilling in “Y” direction No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum processable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and rigidity: * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum dimensions of the edged panel: 300 x 300 mm Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Double-position edge magazine in protective housing for edges up to max. 65 mm thickness Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle No. 1 rounding/chamfering unit for edges No. 1 EF60A combination trimming/scraping unit Perimeter safety fence Chip extraction system with motorised belt Liquid cooling system Automatic lubrication system Lredpougpwnsfx Ab Tsi No. 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED

Stanje: rabljeno, Leto izdelave: 2023, Numerical control BH 660 with BSolid Working range on the X-axis: 4320 mm Lsdpfewgc D Eox Ab Tori Working range on the Y-axis: 1660 mm Working range on the Z-axis: 200 mm No. 2 working zones on the X-axis Bar working table No. 8 adjustable bars for suction cup holders No. 8 pneumatic Bakelite bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal to secure the panel during processing No. 1 5-axis vertical electrospindle with automatic tool change, liquid cooling, HSK63 type taper, 13 kW (17.4 HP) Automatic tool change system with 16 positions, carousel type, along the X-axis at the rear of the machine Automatic tool magazine with 12 places on the side of the machine Drilling head BH24 L with the following spindle configuration: - No. 8 vertical spindles on the X-axis - No. 6 vertical spindles on the Y-axis - No. 6 horizontal spindles on the X-axis - No. 4 horizontal spindles on the Y-axis - No. 1 integrated saw blade for grooving Chip removal system with motorized conveyor belt Front carpet protection and safety system Automatic lubrication system Air conditioning for cooling and cleaning the machine control unit 250 m³/h vacuum pump TECHNICAL SPECIFICATIONS TO BE VERIFIED

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.280 mm, pomik osi Y: 1.320 mm, pomik po osi Z: 170 mm, število mest v zalogovniku orodij: 12, The machine will be provided "free loaded onto truck". No dismantling or loading costs! TECHNICAL DETAILS Travel X-axis: 3,280 mm Travel Y-axis: 1,320 mm Travel Z-axis: 170 mm CNC control: BiesseWorks Work beams: 6 pcs Suction cups: 18 pcs Tool magazines: 12 MACHINE DETAILS Total weight: 3,000 kg Electrical Lsdpfx Abevvvcbo Teri Input voltage: 400 V Type of input current: AC Required power: 25 kW EQUIPMENT - Safety mats - BECKER vacuum pump

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Fully operational, available for inspection in Wadowice X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Ledpfswpthtjx Ab Tsri Control type: CNC XP 600

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1000025340, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.735 mm, pomik osi Y: 1.650 mm, pomik po osi Z: 245.290 mm, višina obdelovanca (maks.): 60 mm, proizvajalec krmilnikov: Biesse BH 660, bSolid, bEdge, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 85 m/min, hitri pomik os Y: 85 m/min, Trumpa aprašymas • Darbinės eigos pagal X ašį: 6735 mm • Darbinės eigos pagal Y ašį: 1650 mm • Darbo stalas: Pod and Rail • Pagrindinio elektros veleno galia: 13,2 kW • Valdomų ašių skaičius: 4 ašys • Maksimalus briaunos aukštis: 60 mm • Gręžimo spindelių bendras skaičius: 20 • Įrankių keitimo vietų skaičius: 16 Išsamus aprašymas • Subkategorija: CNC apdirbimo centrai frezavimui, gręžimui ir briaunavimui • Darbų tipas: briaunavimas, gręžimas, frezavimas • Maksimalus plokštės pravažiavimo aukštis: 60 mm • Darbo laukų skaičius: 2 • Darbo stalas: Pod and Rail • Bėgių skaičius: 10 • Padėties indikatoriai padėklams • Vakuuminės taurelės ruošiniui fiksuoti • Vakuuminių taurelių skaičius: 40 • Spaustuvai ruošiniui fiksuoti • Vakuuminis siurblys • Siurblių skaičius: 1 • Vieno siurblio našumas: 250 m3/h • Gręžimo mazgai: 1 • Pozicija: viršuje • Vertikalaus gręžimo spindelių skaičius: 20 • Horizontalaus gręžimo spindeliai X kryptimi: 4 • Horizontalaus gręžimo spindeliai Y kryptimi: 4 • Frezavimo velenai: 1 Lrsdpeycvcxjfx Ab Tsi • Pozicija: viršuje • Valdomų ašių skaičius: 4 • Automatinis įrankių keitimas • Variklio galia: 13,2 kW • Briaunavimo mazgai: 1 • Klijavimo mazgas • Padėtis: sumontuotas ant pagrindinio mašinos rėmo • Klijų talpa skirtai karštam lydalio klijui • Briaunos ritinio žurnalas • Padėčių skaičius: 4 • Pjovimo/frezavimo mazgai: 2 (viršutiniai) • Pjovimo/frezavimo mazgas: fiksuotas pjovimui/frezavimui X, Y kryptimis • Įrankių žurnalas: 1 • Vieta: 16 • Įrankiai montuojami ant apdirbimo galvos • Dvigubos funkcijos galva – briaunos grandymas ir klijų likučių pašalinimas • Oro srovelės įrenginys briaunų valymui • Valdymo sistema: PC Control • Programinė įranga: Bsolid • Apsauginė konstrukcija su saugos jutikliais • Atliekų drožlių transporterio juosta

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Lrsdpfxexraimo Ab Tei Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit