Biesse Techno Logic nakup rabljenega (309)

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: Hjlhcdew Uhbkjwzsfp O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles); No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 5 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction PC control, type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices) No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 2 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 Hfslhcdwjfz Nanezep CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Working area: X: 215 - 32,000 mm Y: max. 672 mm (horizontal spindle 24 pcs at 32 mm offset) Z: Workpiece height: 9 - 65 mm Min. X distance between vertical heads: 96 mm Configuration: 4+4 motors from below 1 routing motor with pneumatic up/down stroke from below 1+1 motors from the sides, each with 24 spindles / 32 mm pitch 0 motors from the rear 4+4 motors from above 4 material hold-downs from above Very good condition. Available immediately. Another BIESSE TECHNO FDT is available in a different configuration in a line. Price upon request. Hslhcsi U Apmjdwzefp

Stanje: rabljeno, številka stroja/vozila: 007870, Maks. širina panela: 3200 mm Število agregatov: 2 Število injektorjev: 7 Hjlhcdjwimz Howzofp

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) Hslhjw Ug A Hscdwzefp - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW.

Stanje: rabljeno, Leto izdelave: 2003, BIESSE FDT THROUGH-FEED BORING MACHINE price: €20,000 / net Working field along axis "X": max 3200 mm min. 215 mm Workpiece thickness: max 65 mm min. 9 mm Table height from floor: 900 mm 2 pcs horizontal heads, each with 2 drilling units, 11 spindles per unit, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 drilling units with 11 spindles, 32 mm pitch, quick-change system, without chucks. Each unit is powered by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front drilling units (Y1) along screw guide via handwheel for precise adjustment. • Pneumatic stroke activation with scale for manual depth setting. • Switch for manual stroke operation. • Pneumatic adjustment of drilling speed. • Max distance between first and last spindle on horizontal head: 704 mm • Max stroke of horizontal head on "Z" axis: 5–40 mm 5 pcs lower vertical heads Width 96 mm with 2 motors (each 1.8 HP). Electronically activated drilling cycle. The head is equipped with: • Quick-change device for drilling units, with 90° rotation. • Quick positioning of heads along the beam (X axis) through rack guide, gear wheel and position encoder; 2 roller guides; mechanical locking, Hslhcdswpq Hmjwzsfp pneumatic unlocking. • Quick positioning of each drilling unit in the transverse direction (Y axis) via ball screw and position encoder; 1 roller guide; mechanical locking – pneumatic unlocking. • Electronic activation via brushless servomotor; drilling parameter control via NC.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Ta Biesse Techno Kernell je bila izdelana leta 2010. Gre za rabljeno večvretenasto vrtalno linijo s sistemom zlaganja, opremljeno z dovajalno in avtomatsko enoto za zlaganje znamke Wamhoff. Idealna za učinkovite, visoko zmogljive vrtalne operacije – stroj vključuje večpodporne vrtalne enote tako z zgornje kot spodnje strani. Če iščete visokokakovostne vrtalne zmogljivosti, izberite Biesse Techno Kernell iz naše ponudbe – za več informacij nas kontaktirajte. Holhcdwow Nb Nwozefp Vrste aplikacij Vrtanje in izvrtavanje (les)

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 71187, dolžina podajanja os X: 2.500 mm, Stroj je bil razmeroma malo v uporabi. Neposredno iz proizvodnje. Cena vključuje razstavljanje in nakladanje na tovornjak. Hfjljw R Agajhcdwzjp

Stanje: rabljeno, številka stroja/vozila: 007869, Max. panel width: 3200 mm Number of units: 5 Hslhswimzyjcdwzofp Lateral horizontal groups: yes

Stanje: zelo dobro (rabljeno), PC control type NC 400 Deluxe No. 2 motorized throughfeed conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 20 Helhorm Ik Tocdwzofp Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW) The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops. The CNC manages the movement (X-axis) of the transport belts.

Stanje: rabljeno, številka stroja/vozila: 006163, Max. panel width: 3200 mm Number of units: 3 Number of injectors: 6 Hfelhjiwpt Ujcdwzep

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler. Hfjlhcdwodfgg Iszep

Stanje: zelo dobro (rabljeno), Double-sided working machine Can be positioned after a through-feed drilling line (for the automatic processing cycle of drilling and doweling) Electronic control unit – Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal boring supports (No.) 2 Dowelling systems (and glue injection units) No. 6 LH + 6 RH Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) Lower vertical boring supports (No.) 4 Drilling units per lower vertical support (No.) 2 x 1.8 HP Hfjlhcdjdi R R Rjwzjp Upper vertical workpiece clamps (No.) 2 Total connected load (kW) 11.5

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" Hfslhcdwscr U Urezsp SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: Hjlhcdsd Nviqowzefp VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Hslogk T Ttshcdwzefp Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Feed-through motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Hfelhcslwqrtedwzjp Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. The CNC controller manages the movement (Y-axis) of the stops. The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): Hslhcdwjd Nuwiszofp CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction CNC control - PC DESK TOP (Module Editor) - software Tooling System Hslhcdwsu Tp Slszefp W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) Helet Ig A Sshcdwzjfp W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports Helhcdeidqd Tswzofp No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports Hfjlhcdweidqf Rjzep No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: Hfolhcjvnq Txjdwzep W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. Hfelhei D D Tfscdwzop The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Hslhcjhvi Dusdwzsfp Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal CNC controls the movement (X-axis) of the horizontal drilling units CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles