Rotary Harrow Za Dva nakup rabljenega (86.092)

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. Fjdpjy E Schofx Abtegc - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: novo, OMEC 3-roll Mechanical Symmetrical Plate Rolling Machine with Double Pre-bending Brand New “CE” Made in Italy WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAXIMUM BENDING THICKNESS 1.5 x D: 4 mm MAXIMUM BENDING THICKNESS 3 x D: 4.5 mm MAXIMUM BENDING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 kW WEIGHT: 1700 kg The FX3-3 series stands out among mechanical asymmetric 3-ROLL plate rolling machines with simple FULL FEEDING SYSTEM. The side roll (bending roll) comes standard with steel supports, bearings, and external bronze pads ensuring maximum reliability and minimal friction over time. The roll rotation is applied to the UPPER and LOWER rolls via a gear reducer and self-braking motor. Sheet metal feeding and clamping use top-quality motors and reducers. Fgedpfogyk S Aox Abtoc Equipped with hardened rolls, motorized movement and clamping, preparation for profile bending rolls, and a conical forming device directly on the upper roll, these machines offer an outstanding balance between absolute quality and operator-friendly use for a variety of cylindrical and conical bending applications. The top roll opens laterally for easy removal of the rolled shell as standard. MACHINE CONFIGURATION: - MOTORIZED UPPER and LOWER ROLLS with equal power for rotation - MOTORIZED SIDE ROLL for up/down movement - MOTORIZED SHEET CLAMPING - DIGITAL POSITION INDICATOR for side roll position - DIGITAL INDICATOR for sheet clamping position - ROLL HARDENING HRC 55/60, 2mm depth - Side roll supports: steel + shielded bearings + external bronze pads - PRE-ARRANGEMENT FOR SIDE ROLL INCLINATION to form cones (conical device excluded) - EXTERNAL SIDE ROLL INCLINATION LEVER (right) for FX3.2/FX3.3 – (right & left) for FX4.1/FX4.2 - PRE-ARRANGEMENT FOR PROFILE BENDING ROLLS - 2-PEDAL FOOT SWITCH + side roll up/down control and sheet clamping + emergency stop mushroom - ELECTRONIC PHASE CONTROL for power supply - ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS SUPPLIED WITH THE MACHINE: - Front conical device on the upper roll - Digital indicator for side roll position - Digital indicator for sheet clamping position

Stanje: novo, NEBES TM 275 Bandsaw – 400 V Three Phase, NEW “CE” - INDUCTION motor - Cast iron frame - Adjustable cutting angle from 0° to 60° - Entire structure made of cast iron - Electric pump for blade lubrication and cooling - Oil-bath blade tension gauge - Front controls and two cutting speeds - Coolant pump bypass switch - Blade guide with hard metal (H.M.) pads Cutting capacities: - Round at 0°: 220 mm - Square at 0°: 200 x 200 mm - Flat at 0°: 230 x 185 mm - Round at 45°: 150 mm - Square at 45°: 150 x 150 mm - Flat at 45°: 150 x 200 mm - Round at 60°: 90 mm - Square at 60°: 90 x 90 mm - Flat at 60°: 90 x 120 mm Fgsdpoh Nm Ncefx Abtjc - Power: 1.3 HP - Voltage: 400 V - Blade size: 2450 x 27 x 0.90 mm - Weight: 265 kg

Stanje: novo, New, available for immediate delivery while stock lasts. Hydraulic combined shear with 5 workstations: punching station with mechanical back gauge and adjustable piston stroke, notching, flat bar, round and profile cutting with adjustable back gauge and automatic cutting control, foot pedal, centralized lubrication system, work light. Machine supplied with safety guards in compliance with CE standards, CE declaration of conformity, and user manual. Applied force: 45 tons. Motor power: 4 kW. Dimensions: 1,450 x 900 x 1,450 mm (L x W x H). Weight: 1,215 kg PUNCHING: Punching capacity: Ø 22 mm x 15 mm thickness. Throat depth: 175 mm. Punch stroke: 50 mm. Working height: 935 mm. SHEARING: Flat bars: 200 x 15 mm. 300 x 12 mm. Blade length: 316 mm. Round bars: Ø 30 mm. Square bars: 45 mm. 90° angle profiles: 100 x 100 x 10 mm. 45° angle profiles: 70 x 70 x 6 mm. Fedpfxogygfvj Abtegc NOTCHING: Max thickness: 8 mm. Width: 35 mm. Depth: 75 mm. Working height: 935 mm.

Stanje: novo, Electric Press Brake MVD Model S40. Bending length: 1250 mm. Pressing force: 40 tons CNC Control: ESA S630 Number of controlled axes: 4 (Y1-Y2-X-R) Maximum Y-axis stroke: 310 mm Internal clearance: 500 mm Backgauge stroke: 750 mm Main motor power: 2 x 4.3 kW UNIMEC backgauge (Made in Italy) GIVI MISURE optical rulers (Made in Italy) Quick-release clamps, PROMECAM type Faster Shorter bending cycles Excellent bending results Lower maintenance and production costs Fgodpfjrp E A Tex Abtec Silent Reduced energy consumption

Stanje: dober (rabljeno), Leto izdelave: 2010, BMS 4AL CNC Vertical CNC Milling Machine CNC: ECS 1801 Fjdeupg Nuepfx Abtsgc Robust milling machine suitable for a wide range of applications Meehanite cast iron structure 5 HP spindle motor with inverter (variable speed) Automatic X and Y axis feed with 1/2 HP motor and inverter Electric elevating table with 1 HP motor Large working surface: 305x1500 mm ISO 40 spindle taper – Quill diameter: 105 mm Square guides on Y and Z axes X and Y axes slideways with Turcite-B Hardened table and guideways

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, KOIKE DELTATEX 4000 gantry-type plasma cutting system. Effective transverse cutting width: 3,000 mm. Effective longitudinal cutting length: 12,000 mm. Runway length: 14,000 mm. Travel speed: 24,000 mm/min. Gantry guide system: X-Y axes, rack and pinion. Installed trolley type: 1x KOIKE 3D Link plasma support trolley. Fgjdpfxov Sua Ro Abtsc CNC control: KOIKE Katana. Power source: KJELLBERG HF 280i. Recommended cutting capacity with KJELLBERG HF 280i plasma: Cooling unit: KWE 360. - Vertical plasma: 35 mm (in production) mild/stainless steel. - Maximum vertical plasma piercing capacity: 40 mm mild/stainless steel. Machine can be seen in operation, excellent condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta aktuacije: mehanski, število valjev: 3, skupna masa: 5.000 kg, Oprema: dokumentacija / priročnik, Profilna krivilka PARMIGIANI Mod. MERCORI – M Rabljena. Horizontalna trivaljna krivilka. Na voljo za takojšnjo dostavo, če ni predhodno prodana. Regulacija z vizualizacijo. Popolna z opremo za krivljenje ploščatih materialov in cevi. Nov električni razdelilnik. Priročnik za uporabo in vzdrževanje. Kapacitete krivljenja: kotnik 120 x 120 x 12 mm: min. Ø 1200 mm; U 160 vertikalno: min. Ø 1000 mm; ploščati material vertikalno 140 x 40 mm: min. Ø 1000 mm; ploščati material horizontalno 120 x 30 mm: min. Ø 1600 mm; cev 4″: min. Ø 1200 mm. Teža: 5000 kg. Moč motorja: 380 V 12 Hp. Fjdpfx Abeyxwdwstsgc

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Fedpfxeggbuhe Abtsgc Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: novo, BANDSAW NEBES TM 210 - Single phase 230V Cast iron frame Adjustable cutting angle from 0° to 60° Entirely cast iron structure with large quick-release vise and handwheel for clamping Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and oil-bath tension gauge, ensuring constant tension Two cutting speeds and induction motor 0.03 mm accuracy at 100 mm cutting height Fjdpfxei Ezq Dj Abtsgc Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, Univerzalni stroj COMEC RCG 900 za obnovo glav, blokov, bobnov in diskov osebnih in gospodarskih vozil. Širina obdelave: 320 mm Dolžina obdelave: 900 mm Največja delovna višina: 370 mm Največji hod mize: 1200 mm Fedoy Rffyopfx Abtsgc Pomik: 0,8 - 450 mm/min Največji premer zavornih bobnov: 1400 mm Glavni motor: 5,5 Hp Obrati za obdelavo zavor: 35-70-50-100 vrt/min Približna teža z dodatki: 1700 kg Dimenzije: 2300 x 790 x 1700 mm (V)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, PROFILATRICE COMAL PRD 12 Avtomatski robilnik za obrezovanje trakov. Uporablja se za pripravo robov trakov pred nadaljnjim valjanjem. Fjdpsxdr Swefx Abtjgc Stroj je opremljen z nizom valjev, ki omogočajo kontinuirano hladno profiliranje trakov in pločevine do željenega profila ali cevi. Stroj je bil zelo malo uporabljen, popolnoma delujoč in v dobrem splošnem stanju. Na voljo sta originalni priročnik in dokumentacija.

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. Fgodpfjfh R N Dex Abtsc - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: novo, Brand new from factory No. 1 available for immediate delivery!! “CE” Warranty Made in Italy Cutting Capacity: 0° = Round tube 230 mm – Square 220 mm – Rectangle 170 x 300 mm 45° = Round tube 200 mm – Square 180 mm – Rectangle 180 x 230 mm 60° = Round tube 130 mm – Square 120 mm – Rectangle 110 x 130 mm TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable tapered roller bearings, backlash-free. Blade drive by two-speed motor and special reduction unit with bronze gear and hardened/ground worm screw. Wheels appropriately dimensioned. Robust blade guides with sealed roller bearings and adjustable carbide plates. Blade tensioning by electromechanical device with micro-switch blade rotation control. Vice with quick-locking device. Safety features on driving wheel guard, control handle, and blade. Cut thickness 1.2 mm. Cutting angle range from 0 to 60° right. Adjustable stop for repeat cuts. Low voltage system 24 V. Coolant electric pump 0.06 kW for blade cooling. Fgjdpfx Absfibfgjtsc The main features of the machine (blade support rigidity, wheel sizing, blade guides, blade tensioning) have been carefully engineered to prevent blade deformation, increase blade life, and improve cut straightness and cutting speed.

Stanje: rabljeno, Leto izdelave: 2004, Victory 330/80 PLUS Year 2004 Ser. Nr 52863 Working hours 103.000 Screw D40 CC200 A01 4 cicruit watter 1x corepull mowing 4xDigital input 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year 2021 Fgjdpfozcaxdex Abtjc Load 3kg X-Y-Z - servo C- pneumatic

Stanje: rabljeno, Leto izdelave: 2013, Model: BOY 55 E Machine type: Injection molding machine Year of manufacture: 2013 72.000 working hours Serial number: 55241 Fgodpfjzcav Njx Abtec Clamping Unit • Clamping force: 550 kN (55 tons) • Tie bar spacing: 360 x 335 mm • Opening stroke: approx. 400 mm • Mould installation height min.: 250 mm • Plate distance max.: 650 mm Servo drive system (E-version): • up to 30–50% lower energy consumption vs. conventional hydraulics Hydraulic motor power: approx. 7.5 – 11 kW Inlcuding ROBOT: tecno matic micro 13-0040 Payload capacity: ~1–3 kg

Stanje: rabljeno, številka stroja/vozila: 008522, Pozicija 1: Robot HOMAG + KUKA-KFL10 + KR Pozicija 2: Enostranski robni lepilni stroj HOMAG + KUKA-KFL10 + KR Pozicija 3: Robot HOMAG + KUKA-KFL10 + KR Fodpfxjy Nx U Eo Abtsgc Pozicija 4: Povrat plošč HOMAG + KUKA-KFL10 + KR

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 4.500 h, VICTORY 200/80 Power SN:50294 Year:2006 Closing force (kN) 800 S10 screw, diameter 30mm Working hours: ONLY 4.500 Mounting plates enlarged vertically Mould heater with 12 control loops Version HV 2 with control pumps (pressure and flow control in a closed control loop) Fedpfx Abozcanrjtjgc for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units Data protocol Engel, physical type: 20MA-CL Microflow MINI-CAM Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Tubing for flow controller, 4 temperature control circuits

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 6.500 h, VICTORY 200/60 Power SN 162699 Closing force (kN) 600 (open to 800 kN) Year of production: 2003 Screw diameter 30.00 mm L/D ratio of mass cylinder 20.50 Working hours: ONLY 6.500 Vertically enlarged clamping plates (B-plates) Swiveling reject chute for reject selection, activated upon reject detection Version variant HV 2 with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection 4x digital output, 4x digital input Interface for temperature control units or hot runner controllers Data protocol Engel, physical type 20 mA – CL Microflow MINI-CAM - Process parameter adjustment support based on an expert system Fgodpfx Abozcanfetsc 1xService socket, 2-pole, 230Vž 4x 3-phase socket, 10A / 16A 2x3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 8 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable.

Stanje: zelo dobro (rabljeno), Chain Mortising Machine PANHANS Drilling table size: 520 x 290 mm Max. drilling depth: approx. 130 mm Max. drilling length: approx. 240 mm Height adjustment: approx. 135 mm Drill speed: 3000 rpm Motor power: 1.5 kW, 400 V, 50 Hz Required space (L x W): approx. 900 x 1100 mm Weight: approx. 220 kg 2-lever operation WESCOTT drill chuck, 20 mm Dowel drilling device with 4 stops (16, 22, 25, 32 mm) Mitre fence, continuously adjustable up to 45° 2 workpiece clamps Fodoza Dx Nopfx Abtjgc Height adjustment via handwheel Motor protection switch with undervoltage release Workpiece stop, 1500 mm Includes inspection certificate for compliance with section 4 of the AM-VO Space requirement: approx. 950 mm x 1000 mm x 1300 mm Weight: approx. 200 kg Note regarding used machines: • Errors in technical data and prior sale excepted. • Prices listed are ex-location, free loading. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine at its location. • Special agreements are only valid if made in writing. (We only answer inquiries containing your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm Fgodsycg U Espfx Abtsc 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: kot nova (razstavni stroj), Filter za čisti zrak Tip: Power Unit 250 P FU Vrsta ponudbe: demonstracijski stroj Tehnični podatki: Moč motorja: 7,5 kW / 3 Ph / 400 V / 50 Hz Premer sesalnega nastavka: 250 mm Nazivni volumenski pretok: 3.534 m3/h Maks. volumenski pretok: 4.900 m3/h Podtlak pri Vnenn: 3.184 Pa Filtrirna površina: 22,4 m2 Čiščenje s stisnjenim zrakom Fgedpfehfmpxox Abtjc vklj. integrirani predločevalnik vklj. integrirani gasilni sistem vklj. inverter za regulacijo hitrosti vklj. integrirano zvočno izolacijo (- 4 dB(A)) Zbiralnik odrezkov: 2 x 250 l Raven zvočnega tlaka: 71 dB(A) vklj. prašno zaporo Dimenzije D x Š x V = 3000 x 1058 x 2361 mm Teža: 850 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Fgsdpfx Aboy Emw Hjtoc Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. • Special agreements are only valid in written form. (We will respond to enquiries only if you provide your address and telephone number!)

Stanje: rabljeno, prevoženi kilometri: 904.223 km, moč: 338 kW (459,55 KM), prva registracija: 10/2018, vrsta goriva: dizel, skupna masa: 18.000 kg, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.600 mm, barva: bela, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Oprema: ABS, hidravlika, klimatska naprava, nadzor oprijema, parkirni grelec, računalnik na krovu, zapora diferenciala, dovoljena skupna masa: 18000 kg, velikost pnevmatik: 315/80 R22.5, 1. os: , 2. os: , listno-zračna vzmetenje, retarder, sedlena sklopka, priklop za izhodno gred: MAN 650P s priključkom za črpalko 1,00/1,24, elektronski zavorni sistem EBS, zavorni asistent, elektronski program stabilnosti ESP, sistem za nadzor zdrsa pogonskih koles ASR, voznikov sedež zračnega vzmetenja, nastavitev višine svetlobnega snopa, MAN Media Truck, nastavljiv volanski drog, električni pomik stekel, prikaz zunanje temperature, meglenke, električno nastavljiva zunanja ogledala, ogledalo za robnik, imobilizator, tonirana stekla, senčnik, hladilna skrinja, pomoč pri speljevanju v klanec, ročno dvižna streha, držalo za pijače, gumijasta talna obloga, omejevalnik hitrosti, spodnja postelja, vzmetena kabina, pridržujemo si pravico do napak in sprememb. Vozilo se prodaja v imenu Digitalni Tahograf. Lokacija vozila: Zagreb, Hrvaška. Fedpfjzctqgjx Abtegc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!) Fgsdpfx Absx Ah A Aotoc