Rob Breaker nakup rabljenega (18.044)

Stanje: novo, Leto izdelave: 2025, Poultry Plucking Machine and Scalding Tank for Turkeys and Geese Poultry Machine SČP ROB *Time-saving when plucking larger quantities of poultry *The machine model can be adapted to the type of poultry (turkeys/geese or chickens) *Very easy to use and clean *Easy to move thanks to wheels mounted as standard *Connection tap for rinsing feathers with water *If the poultry is properly prepared beforehand, it will not be damaged during processing in the machine. 306.121, SČP ROB 60, max 20kg / 2 units, 60 pieces per hour, Laodsp At Rpjpfx Aa Eei Dimensions: 1030x1050x950 mm, weight: 91 kg, 2.2 kW, 400V 307.220 Scalding Tank for Turkeys and Geese *For scalding larger poultry – turkeys and geese *Processing 2–4 birds at the same time *Scalding time for turkeys and geese – 7 minutes at 72°–74°C *Safe operation and easy cleaning *Easy temperature control via electronic thermostat *The thermostat reliably maintains the selected water temperature *Maximum water temperature in the tank: 90°C *Built-in drain tap for emptying water *Mobile on wheels 307.220 KOH, 120L, max. temp. 90°C Dimensions: 1000x1380x1050 mm, weight: 318 kg, 10kW, 400V

Stanje: novo, Edge sanding machine Bernardo HV 80 OSZI Work table: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Sanding belt back panel: 950 x 200 mm Sanding unit lockable: 90° / 0° Ledpfod Tb U Sex Aa Eoai Belt speed: 16 m/sec Additional table: 300 x 250 mm Extraction connection: Ø100 mm Roller diameter: 110 mm Motor output (continuous duty S1 100%): 1.5 kW (2.0 HP) Motor input power (intermittent duty S6 40%): 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Weight: approx. 148 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: -, vrsta vhodnega toka: trifazni, skupna masa: 500 kg, Lump breaker for crushing/deagglomerating various materials. Ledpfxsuvg D Ee Aa Esai

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Ledpfx Ajc S Di Rsa Eeai Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 3000 mm Ljdpfx Asgtdpusa Ejai Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 69611, Awex carton breaker with compressed air Lodpfxowl N Ihj Aa Esai

Leto izdelave: 1995, Stanje: dober (rabljeno), številka stroja/vozila: 4202, Technical data: Lodped Af Shefx Aa Eeai - Plate thickness up to: 6 – 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel depth in a single pass: 10 mm - Working speed: 2.6 m/min - Drive: 400 V / 2.2 kW - Space requirement approx.: W 550 x D 500 x H 700 mm - Weight approx.: 65 kg

Stanje: novo, Leto izdelave: 2025, Debarking and Chamfering Machine ECS500 / ECS500 E Ledpfxor D Nk Ne Aa Esai • Weight: 150kg / 250kg • Drive: PTO hub drive / Electric three-phase motor 5.5kW • Dimensions (LxWxH): 100cm x 90cm x 155cm • 3-point hitch for tractor • Knife disc diameter: 500mm • Knives are resharpenable and replaceable Price: €5,400 / €6,700

Stanje: pripravljen za uporabo (rabljen), Dowel Cutting and Chamfering Machine Lodpfx Aaewmpvhs Eeai Manufacturer: Löser Model: AA 200 Bench-top machine for the production of wooden dowels, designed for efficient cutting to length and chamfering of dowel rods / round bars. The dowel cutting and chamfering machine type AA 200 is a machine with low to medium capacity. It can cut and chamfer round bars made of wood, plastic, hard paper, and other materials. The dowel length is adjustable between 20 and 150 mm, set using an adjustment scale. The chamfer size can be set as required. The machine comes standard with a magazine ring, allowing the operator to run multiple machines simultaneously or perform other tasks. The machine features a solid, torsion-resistant cast iron frame. Additional advantages include very easy operation, simple maintenance, and easily accessible lubrication points. Technical data: - For dowel diameters approx. 6–13 mm - Minimum cutting length: 15 mm - Maximum cutting length: 150 mm - Operating capacity: approx. 2000 pieces per hour - Weight: 53 kg (bench machine) Includes adapters for dowel diameters 8–9 mm, 10–11 mm, and 12–13 mm. Gear and chain have been replaced.

Stanje: novo, Edge sanding machine with oscillating sanding belt - made in AUSTRIA Lasdpfo Dxrgex Aa Eei Electrical connection: 380/400V Motor power: 2.2 kW Oscillation: 0.18 kW Sanding belt length: 3000 mm Sanding belt width: 200 mm Table size: 1000 x 300 mm Weight: 300 kg Roller diameter: 120 mm Interchangeable contact roller, diameter: 65/115 mm Round sanding attachment with support table: 350 x 250 mm Mitre fence Central extraction port: 140 mm

Stanje: novo, Leto izdelave: 2022, Bandwidth: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Lsdpfx Aogr Ufhsa Eeai Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Cylinder 1350 + auger 55 mm Year of manufacture 2004 Laedpfx Ajr Avfvoa Esi LD 24

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): Ljdpfx Aajllvr Ds Esai - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Stanje: rabljeno, Bar Contact Contactor, DC Contactor, Contactor, DC Switch, Power Contactor, Circuit Breaker, High-Voltage Switch Lsdpfx Ajfipfuea Esai ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally Open Main Contacts Design: Open, mounted on bars Drive: AC + Laminated Magnetic Circuit + Rectifier + Series Resistor Drive Rated Voltage: 220-230 V / 50-60 Hz Main Contact Rated Current: 63 A Main Contact Rated Voltage: 1500 VDC Number of Normally Closed Main Contacts: 0 Number of Normally Open Main Contacts: 3 Number of Auxiliary Contacts: 1 NC + 1 NO + 1 Changeover Auxiliary Contact Rated Current: 6 A - Main contacts with deionization chambers for rapid arc quenching Dimensions (W x H x D): 410 x 250 x 195 mm Weight: approx. 9 kg Used, but in very good condition

Stanje: novo, Leto izdelave: 2024, Abrasive belt size: 150 x 2280 mm Motor power: 2.2 kW Abrasive belt oscillation Lodpedq H D Ssfx Aa Eoai Pneumatic abrasive belt tensioning Grinding unit swivels 90° - 180° Additional table at deflection roller

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm Ljdpfxsbahd Ej Aa Eoai

Stanje: dober (rabljeno), Leto izdelave: 2013, 14 pcs high-voltage vacuum circuit breakers in cubicles (on wheels), 24kV, 1250A, 25kA/1s, 3-phase, each with 2 x trip coils 110V DC, 1 x closing coil 110V DC, motor drive 220V AC/DC, manufacturer ABB, model VD4.24.12.25, year of manufacture 2013. Ljdpjvv Huhjfx Aa Ejai

Stanje: rabljeno, TECHNICAL DATA - Loading Dimensions: * Width: 1500 [mm] * Depth x Height: 850 x 400 / 700 x 550 / 400 x 650 [mm] - Loading Weight: 1000 [kg] - Washing Bath * Volume: 600 [L] * Heating Power: 18 [kW] Ljdpfsug U R Tox Aa Eeai - Rinsing Bath * Volume: 650 [L] * Heating Power: 18 [kW] - Spray Performance (3 bar): 950 [L/min] - Electrical Power: 43 [kW] - Noise Level: < 80 [dBA] - Machine Dimensions (L x W x H): 4450 x 1800 x 2540 [mm] - Machine Weight: 1300 [kg] EQUIPMENT - Oil Separator - Fine Filtration - Manual Loading

Stanje: zelo dobro (rabljeno), KD-PUTZ with oiling Completely made of stainless steel Ledpfx Aaegh A Sve Esai Sheet metal cleaning machine for perforated sheets and standard sheets with 2 edges For 60x80 sheets, edging on the short side Excellent condition Connection: 16 A

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Lsdpod Hintjfx Aa Eeai Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: AGG0199 - Manufacturer Code: 147099FSFT1072 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Lodpfxovu Ut Ae Aa Esai

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. Lsdpfx Ajfbr S Rea Eeai • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Lsdpfx Ajdurxnea Esai Speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: - Special flap grinding wheel K80-ST - Extraction nozzle - Operating manual

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood code: AGG0201 - Manufacturer code: 147009FSFTI3R6 - Condition: Used - Functionality: Not tested. If interested, we offer an overhauling/refurbishment service; please contact us. Lasdpfsvu Uvdjx Aa Esi

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Ljdpjc Tmygjfx Aa Esai Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)