Preproga Paternoster nakup rabljenega (201)

Stanje: novo, Leto izdelave: 2026, TOP Storage Carousel for 3D Film Rolls Our film storage carousels are suitable for storing all types of film rolls. They can be used as high-bay storage at the membrane press or as a space-saving 3D film storage solution. With our carousels, a large number of film rolls (up to 32 rolls with a diameter of 300mm) can be stored on a minimal footprint of approximately 2.4m x 1.2m. The required film is available immediately at the push of a button. Our carousels are designed and available as standard models with heights ranging from 2.8 meters to 6.0 meters. We also offer custom solutions. Please contact us and we will find the right storage solution for you. As optional equipment, we offer centering sleeves, manual or automatic cutting devices, as well as ionization solutions. • Suspension rods ranging from Ø 42.4mm up to max. 76mm • Full-height side cladding • Protective grid from 2.2m above floor level up to the top of the carousel • Load chain as hollow pin chain, breaking strength 100kN, pitch 50mm = Suspension bar mounting grid, carousel speed approx. 5.5 m/min Gjdpfx Aeff Huweb Tjuk • Control via keyed switch with return spring (dead man’s control) for up/down operation • Rated voltage 400V; 3N; 50Hz, mains cable with CEKON plug 16A, external circuit protection 10A slow-blow • Attention! Installation requires a stable, level, and solid floor—no floating screed. Minimum floor load capacity must be at least 2.4kg/cm²

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, obratovalne ure: 30.629 h, laserska moč: 4.000 W, potovalna razdalja osi X: 3.070 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 200 mm, višina izdelka (maks.): 20 mm, Laser cutting machine including paternoster! The machine was serviced by the manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2 laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel range and cutting parameters Travel range X: 3,070 mm Travel range Y: 1,550 mm Travel range Z: 200 mm Table load capacity: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min Travel speed X: 80 m/min Travel speed Y: 80 m/min Simultaneous axis movement: 113 m/min Travel speed Z: 60 m/min Control: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Godpfxoxc E Dqo Ab Tsuk Dimensions & weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Chiller unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting beam capacity: 3,000 kg MACHINE DETAILS Dimensions & weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading station Unloading level Lifting beam Pallet changer Suction beam

Stanje: novo, Leto izdelave: 2026, Custom paternoster stacking systems in various technical designs for cut timber lengths from 3.0 to 6.0 m (other lengths on request). Goder Nx Tmepfx Ab Touk Options: • With/without batten bundling (various versions according to requirements) • With/without batten magazine, depending on requirements single or double chamber, with pneumatic gripper • Infeed and outfeed transport according to customer specifications

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.100 mm, skupna širina: 3.420 mm, skupna dolžina: 1.765 mm, nosilnost na odsek shranjevanja: 244 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 8 A, Vertikalni krožni regal (dvižni sistem) za shranjevanje in izdajo blaga. Sistemi Hänel Rotomat delujejo po principu krožnega regala (»Paternoster«) in omogočajo prihranek prostora ter ergonomsko pripravo materiala. Guedpfx Abex Aqcfo Tjk

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system 3 identical vertical carousels available External dimensions: Total height: 6,500 mm Total width: 3,670 mm Total depth: 1,560 mm 46 carriers, each with a payload of 305 kg Clear usable dimensions per carrier: Height: 210 mm Width: 3,050 mm Depth: 520 mm Chain pitch: 254 mm Gsdpforw A Eiex Ab Teuk Additionally included: 46 intermediate shelves to halve the usable height Total payload up to 14,200 kg Retractable shelf positioned 1,000 mm above finished floor level, with stainless steel worktop Color: GREY / DARK GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors, technical changes, and detail deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Stanje: zelo dobro (rabljeno), Hitri paternoster sistem za zlaganje desk za palete. Z magazinom za letve. S paketnim izhodom. Pripravljen za demontažo. Več podrobnosti na zahtevo. Prodaja po naročilu stranke. Godpfx Ajxz R Ufeb Tsuk

Leto izdelave: 2017, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale is an Eliog brand paternoster oven, model PNO 80. This oven is a custom-made unit. Designed for heating components, featuring a paternoster handling system and control cabinet. Also suitable for food and cannabis drying/dehydration processes. The system was installed in 2017 and has only been used occasionally since approximately 2022. The system has already been dismantled. Technical data: Year of manufacture: 2017 Max. workpiece tray area: 65 mm Rated temperature: 70 °C Operating temperature: 70…75°C (At 75°C, the usable chamber safety thermostat will switch off!) Set throughput time: approx. 240 min Max. air flow velocity: approx. 4 m/s Heating capacity: 72 kW Rated voltage: 3*400 V, 50 Hz Supply air: ambient air at oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs (capacity in oven) Max. workpiece weight: 0.3 kg Conveying height above floor: 400 mm Heating: 3 kW / heating element Gujdoup R U Uopfx Ab Tek 6 heating elements / control zone-4 (72 kW total capacity) Dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5,012.4*3,919.5*5,000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been edited due to copyright reasons) Transport and loading can be arranged Europe-wide at extra cost, if requested. Prices are net, subject to VAT. Inspection available by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), In the field of 3D thermoforming, we also offer presses, turners, brushing machines, and membranes on Machineseeker! Paternoster For the membrane press FILM STORAGE PATERNOSTER For storing film rolls in the warehouse and at the press Technical specifications: - Height: 3800 mm - Max. film width: 1600 mm - Max. roll diameter: 500 mm - Max. film weight: 340 kg - Number of support bars: 12 units - Floor space required: 1000 x 2370 x 3800 mm - Including film transport trolley - Drive power: 1.5 kW - Total load capacity: 4080 kg at max. roll weight of 340 kg - Unit weight including load: 5240 kg - Floor load (t/m²): 1.89 - Core inner diameter: max. 90 mm, support bar diameter: 42.4 mm - Side cladding over the entire height - Protective grating from 2.2 m above floor up to top of construction height - Load chain as hollow pin chain, breaking force 100 kN, pitch 50 mm = support bar suspension grid - Circulating speed approx. 5.5 m/min - Operation via key switch with dead-man control for up/down - Rated voltage: 400 V; 3N; 50 Hz, mains connection cable with CEKON plug 16A - Mains protection (provided by the customer): 10A slow-blow Description: The film roll storage paternoster is designed for storing film rolls, for example: * Directly at the membrane press, allowing a large number of film rolls to be stored on the smallest footprint. The film required for the pressing process is available at the push of a button. * As a buffer storage for all film rolls. A large number of rolls can be stored on a minimal footprint and are always easily accessible. Optional features: * Manual or automatic cutting device available * Ionization * Other construction heights from 2800 mm up to 6000 mm high paternosters * Additional support bars * Additional roll transport trolleys Gsdsbgdv Iopfx Ab Tsuk Price on request

Leto izdelave: 1996, Stanje: dober (rabljeno), For sale we offer a used Kardex/paternoster unit. Technical specifications: Length: 3,400 mm Width including tray: 1,960 mm Width without tray: 1,650 mm Height: 6,200 mm Shelves: Godpfxokuyk Ae Ab Teuk Length: 2,950 mm Width: 620 mm Height: 110 mm If interested, please get in touch.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw Gujdpfowclkysx Ab Tjk - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system External dimensions: Installation height: 5750 mm Installation width: 3350 mm Installation depth: 1550 mm 26 carriers, each with a payload of 250 kg Clear usable dimensions per carrier: Height = 335 mm Width = 2650 mm Depth = 450 mm Chain pitch: 381 mm Depositing table at a height of 1000 mm above the finished floor level – worktop made of wood/rubber Color scheme: grey/blue, Surfaces cleaned, signs of use possible Drive motor power: 1 x 3.0 kW / 400 Volt Guedsdvlt Hopfx Ab Tek Subject to errors, technical modifications and deviations from the photos. Delivery and installation currently mainly within Germany, Austria and several neighboring countries.

Stanje: dober (rabljeno), Conveyor Technology (roller conveyor) with numerous small rollers – used –: Prices are net per item at location! Manufacturer: unknown Model: unknown Year of manufacture: unknown Type 1 = 6 units €100 each Element length: approx. 1.22 m Element width: approx. 91 cm Frame height: approx. 9 cm Merger units = 5 pieces €100 each Element width: approx. 91 cm Frame height: approx. 9 cm Internal dimension: 1.92 m Godpskn D A Uofx Ab Tsuk Curve = 1 piece €100 Element width: approx. 91 cm Frame height: approx. 9 cm Internal dimension: 1.92 m Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Stanje: dober (rabljeno), Leto izdelave: 2014, Manufacturer: Hänel Model: Lean Lift Year of manufacture: 2014 Machine dimensions: Gujdpsvt Euzjfx Ab Tok Height: approx. 6302 mm Width: 2805 mm Depth: 2810 mm Trays: 40 units, up to 400 kg per container Tray dimensions: Height: 57 mm Depth: 825 mm Width: 2460 mm Total load capacity: 40,000 kg (2 × 20,000 kg)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zaradi prenehanja obratovanja na lokaciji Norderstedt, naprodaj v stanju, kot je, brez nakladanja. Gusdpjrn R Rfjfx Ab Tsk Kugler Paternoster izsekovalni stroj, primeren za Wire-O in registre Format 50 x 50 cm Vključno z 2 orodjema za izsekovanje Zadnje znižanje cene!!!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Na voljo je valjasti paternoster ESKA za skladiščenje in nakladanje. Širina valjev: 1600 mm, maksimalna nosilnost: 2800 kg, skupna višina: 4300 mm. Na voljo je dokumentacija. Ogled na lokaciji je mogoč. Gusdpjw I E Dcsfx Ab Tek

Stanje: dober (rabljeno), Leto izdelave: 1990, Kardex vertical carousel Type: Kardex Serial no.: not legible Year of manufacture: 1990 Godpfxow E Hh Es Ab Teuk Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Compartment load: 250 kg Total load capacity: 10,000 kg Colour: White

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system Optional control system extension available 2 identical machines available External dimensions: Overall height: 4,730 mm Width: 3,270 mm Depth: 1,680 mm 29 carriers, each with a payload capacity of 250 kg Usable internal dimensions per carrier: Height = 215 mm Width = 2,730 mm Depth = 620 mm Chain pitch: 254 mm For 0 carrier units, intermediate shelves are available, allowing a load capacity of 160 kg per usable level Intermediate shelves can be manufactured on request Deposit table at a height of 900 mm above finished floor level – worktop with V2A stainless steel cover Color: grey / grey Gedsdnhz Uspfx Ab Tsuk Surface cleaned, signs of use possible Drive motor power: 2 x 1.5 kW / 400 V Subject to errors and technical modifications or deviations in photos Delivery & installation currently mainly in Germany, Austria, and other neighboring countries

Leto izdelave: 2012, Stanje: dober (rabljeno), Type: IND-PA Device no.: 0/1220744/1 Year of manufacture: 2012 Device height: approx. 5600 mm Device width: approx. 2870 mm Device depth: approx. 4000 mm Number of rollers: 45 Gedpfx Ashyhlgjb Tsuk Roller width: approx. 2370 mm Compartment load capacity: 200 kg Total load capacity: 9000 kg Colour: beige

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG control system StoreControl P External dimensions: Construction height: 5000 mm Construction width: 2650 mm Construction depth: 1250 mm plus 300 mm storage table 34 carriers, each with a payload of 140 kg with clear usable dimensions: Height = 220 mm Width = 2220 mm Depth = 410 mm Chain pitch: 254 mm Storage table positioned 1000 mm above finished floor level, equipped with a wooden worktop Color: GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 1.8 kW / 400 Volt Subject to errors and technical modifications Gsdpodnfdlofx Ab Tsuk Delivery and assembly currently mainly in Germany, Austria, and several neighboring countries

Stanje: dober (rabljeno), Leto izdelave: 2003, Kardex Vertical Carousel Model: SYS-120-1414 Godpsq I R D Nofx Ab Touk Serial No.: 03001086/001 Year of manufacture: 2003 Device height: approx. 3,110 mm Device width: approx. 2,950 mm Device depth: approx. 1,150 mm + 300 mm for tabletop Number of trays: 14 with 7 additional drawers Tray width: approx. 2,630 mm Tray depth: approx. 320 mm Tray height: approx. 330 mm Shelf load capacity: 100 kg Total load capacity: 1,400 kg Colour: white

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Guedpfjdnh R Hsx Ab Tjk Overall height: 4340 mm Overall width: 3270 mm Overall depth: 1680 mm 26 carriers with a load capacity of 250 kg each Usable internal dimensions per carrier: Height: 215 mm Width: 2730 mm Depth: 620 mm Chain pitch: 254 mm For 0 load supports, intermediate shelves are available, load capacity then 120 kg per usable level Intermediate shelves can be manufactured upon request Deposit table at 900 mm above finished floor level - worktop with V2A stainless steel cover Colour: grey/grey Surface cleaned, signs of use and minor deformations possible Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors, technical modifications or minor deviations in the illustrations, Photos show a similar machine, Installation currently primarily in Germany, Austria and some neighboring countries.

Leto izdelave: 2003, Stanje: dober (rabljeno), Type: TLI 4500/2044 Device no.: 03502 Year of manufacture: 2003 Device height: approx. 4500 mm Device width: approx. 2000 mm Device depth: approx. 7010 mm Number of rollers: 44 Roller width: approx. 1680 mm Shelf load: 150 kg Total load capacity: 7000 kg Guodpfx Abehyhlks Tok Superstructure, see photo: 3000 mm Colour: beige

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system External dimensions: Overall height: 6,010 mm Gjdpfx Abjhfxkao Touk Overall width: 3,501 mm Overall depth: 1,774 mm 25 carriers, each with a payload of 628 kg Usable internal dimensions: Height: 359 mm Width: 2,880 mm Depth: 628 mm Chain pitch: 406 mm Deposit table at 1,000 mm above finished floor level with worktop / plastic surface Colour: light grey, surface cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 V Additional features: automatic chain tensioning, various intermediate shelves, subject to errors and technical modifications Delivery and installation currently mainly in Germany, Austria and several neighboring countries

Stanje: dober (rabljeno), Leto izdelave: 1990, Megamat Vertical Carousel Model: 112-350-13 Serial No.: 7479 Year of Manufacture: 1990 Device Height: approx. 2950 mm Device Width: approx. 2675 mm Device Depth: approx. 1130 mm + 280 mm table surface Number of Shelves: 13 Shelf Width: approx. 2160 mm Shelf Depth: approx. 295 mm Shelf Height: approx. 330 mm Gedpfx Asv Ewn Dsb Tsuk Shelf Load Capacity: 100 kg Total Load Capacity: 1,300 kg Colour: beige

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system External dimensions: Gsdpfx Abednzg Ne Tjuk Installation height: 5,860 mm Width: 2,940 mm Depth: 1,180 mm 25 carriers, each with a load capacity of 165 kg Usable dimensions per carrier: Height = 380 mm Width = 2,500 mm Depth = 410 mm Chain pitch: 412 mm Total load capacity up to 4,110 kg Retractable tray positioned 1,000 mm above FFL (Finished Floor Level) with a rubberized work surface Color scheme: GREY / BROWN, surfaces cleaned, signs of wear possible Drive motor output: 1 x 1.8 kW / 400 Volt Base machine for this modernization: Kardex SYS 180 Subject to errors, technical changes, and deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries