Datoteke Paternoster nakup rabljenega (203)

Stanje: novo, Leto izdelave: 2026, TOP Storage Carousel for 3D Film Rolls Our film storage carousels are suitable for storing all types of film rolls. They can be used as high-bay storage at the membrane press or as a space-saving 3D film storage solution. With our carousels, a large number of film rolls (up to 32 rolls with a diameter of 300mm) can be stored on a minimal footprint of approximately 2.4m x 1.2m. The required film is available immediately at the push of a button. Our carousels are designed and available as standard models with heights ranging from 2.8 meters to 6.0 meters. We also offer custom solutions. Please contact us and we will find the right storage solution for you. As optional equipment, we offer centering sleeves, manual or automatic cutting devices, as well as ionization solutions. • Suspension rods ranging from Ø 42.4mm up to max. 76mm • Full-height side cladding • Protective grid from 2.2m above floor level up to the top of the carousel • Load chain as hollow pin chain, breaking strength 100kN, pitch 50mm = Suspension bar mounting grid, carousel speed approx. 5.5 m/min • Control via keyed switch with return spring (dead man’s control) for up/down operation • Rated voltage 400V; 3N; 50Hz, mains cable with CEKON plug 16A, external circuit protection 10A slow-blow Ijdpjff Huwofx Ah Aotr • Attention! Installation requires a stable, level, and solid floor—no floating screed. Minimum floor load capacity must be at least 2.4kg/cm²

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, obratovalne ure: 30.629 h, laserska moč: 4.000 W, potovalna razdalja osi X: 3.070 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 200 mm, višina izdelka (maks.): 20 mm, Laser cutting machine including paternoster! The machine was serviced by the manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2 laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel range and cutting parameters Travel range X: 3,070 mm Travel range Y: 1,550 mm Travel range Z: 200 mm Table load capacity: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min Travel speed X: 80 m/min Travel speed Y: 80 m/min Simultaneous axis movement: 113 m/min Travel speed Z: 60 m/min Control: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg Iodpoxc E Dqofx Ah Aetr EQUIPMENT Documentation/manual Chiller unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting beam capacity: 3,000 kg MACHINE DETAILS Dimensions & weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading station Unloading level Lifting beam Pallet changer Suction beam

Leto izdelave: 2017, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale is an Eliog brand paternoster oven, model PNO 80. This oven is a custom-made unit. Itjdpjup R U Ujfx Ah Aer Designed for heating components, featuring a paternoster handling system and control cabinet. Also suitable for food and cannabis drying/dehydration processes. The system was installed in 2017 and has only been used occasionally since approximately 2022. The system has already been dismantled. Technical data: Year of manufacture: 2017 Max. workpiece tray area: 65 mm Rated temperature: 70 °C Operating temperature: 70…75°C (At 75°C, the usable chamber safety thermostat will switch off!) Set throughput time: approx. 240 min Max. air flow velocity: approx. 4 m/s Heating capacity: 72 kW Rated voltage: 3*400 V, 50 Hz Supply air: ambient air at oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs (capacity in oven) Max. workpiece weight: 0.3 kg Conveying height above floor: 400 mm Heating: 3 kW / heating element 6 heating elements / control zone-4 (72 kW total capacity) Dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5,012.4*3,919.5*5,000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been edited due to copyright reasons) Transport and loading can be arranged Europe-wide at extra cost, if requested. Prices are net, subject to VAT. Inspection available by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Stanje: novo, Leto izdelave: 2026, Custom paternoster stacking systems in various technical designs for cut timber lengths from 3.0 to 6.0 m (other lengths on request). Iodpfx Ahjr Nx Tmo Aotr Options: • With/without batten bundling (various versions according to requirements) • With/without batten magazine, depending on requirements single or double chamber, with pneumatic gripper • Infeed and outfeed transport according to customer specifications

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.100 mm, skupna širina: 3.420 mm, skupna dolžina: 1.765 mm, nosilnost na odsek shranjevanja: 244 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 8 A, Vertikalni krožni regal (dvižni sistem) za shranjevanje in izdajo blaga. Sistemi Hänel Rotomat delujejo po principu krožnega regala (»Paternoster«) in omogočajo prihranek prostora ter ergonomsko pripravo materiala. Iedpfxex Aqcfs Ah Ajtr

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system 3 identical vertical carousels available External dimensions: Total height: 6,500 mm Total width: 3,670 mm Total depth: 1,560 mm 46 carriers, each with a payload of 305 kg Clear usable dimensions per carrier: Height: 210 mm Itjdpsrw A Eiofx Ah Aer Width: 3,050 mm Depth: 520 mm Chain pitch: 254 mm Additionally included: 46 intermediate shelves to halve the usable height Total payload up to 14,200 kg Retractable shelf positioned 1,000 mm above finished floor level, with stainless steel worktop Color: GREY / DARK GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors, technical changes, and detail deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Stanje: zelo dobro (rabljeno), Hitri paternoster sistem za zlaganje desk za palete. Z magazinom za letve. S paketnim izhodom. Pripravljen za demontažo. Več podrobnosti na zahtevo. Prodaja po naročilu stranke. Itjdpfxjxz R Ufs Ah Aor

Stanje: dober (rabljeno), In the field of 3D thermoforming, we also offer presses, turners, brushing machines, and membranes on Machineseeker! Paternoster For the membrane press FILM STORAGE PATERNOSTER For storing film rolls in the warehouse and at the press Technical specifications: - Height: 3800 mm - Max. film width: 1600 mm - Max. roll diameter: 500 mm - Max. film weight: 340 kg - Number of support bars: 12 units - Floor space required: 1000 x 2370 x 3800 mm - Including film transport trolley - Drive power: 1.5 kW - Total load capacity: 4080 kg at max. roll weight of 340 kg - Unit weight including load: 5240 kg - Floor load (t/m²): 1.89 - Core inner diameter: max. 90 mm, support bar diameter: 42.4 mm - Side cladding over the entire height - Protective grating from 2.2 m above floor up to top of construction height - Load chain as hollow pin chain, breaking force 100 kN, pitch 50 mm = support bar suspension grid - Circulating speed approx. 5.5 m/min - Operation via key switch with dead-man control for up/down - Rated voltage: 400 V; 3N; 50 Hz, mains connection cable with CEKON plug 16A - Mains protection (provided by the customer): 10A slow-blow Description: The film roll storage paternoster is designed for storing film rolls, for example: * Directly at the membrane press, allowing a large number of film rolls to be stored on the smallest footprint. The film required for the pressing process is available at the push of a button. * As a buffer storage for all film rolls. A large number of rolls can be stored on a minimal footprint and are always easily accessible. Optional features: Iedpfxsbgdv Io Ah Aotr * Manual or automatic cutting device available * Ionization * Other construction heights from 2800 mm up to 6000 mm high paternosters * Additional support bars * Additional roll transport trolleys Price on request

Leto izdelave: 1996, Stanje: dober (rabljeno), For sale we offer a used Kardex/paternoster unit. Technical specifications: Length: 3,400 mm Width including tray: 1,960 mm Width without tray: 1,650 mm Height: 6,200 mm Shelves: Iodpfxjkuyk Ae Ah Ajtr Length: 2,950 mm Width: 620 mm Height: 110 mm If interested, please get in touch.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor Isdpfx Ahjwclkyo Aetr The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: dober (rabljeno), Leto izdelave: 2014, Manufacturer: Hänel Model: Lean Lift Year of manufacture: 2014 Machine dimensions: Itjdpfovt Euzex Ah Aer Height: approx. 6302 mm Width: 2805 mm Depth: 2810 mm Trays: 40 units, up to 400 kg per container Tray dimensions: Height: 57 mm Depth: 825 mm Width: 2460 mm Total load capacity: 40,000 kg (2 × 20,000 kg)

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system External dimensions: Installation height: 5750 mm Installation width: 3350 mm Installation depth: 1550 mm 26 carriers, each with a payload of 250 kg Clear usable dimensions per carrier: Height = 335 mm Width = 2650 mm Depth = 450 mm Chain pitch: 381 mm Depositing table at a height of 1000 mm above the finished floor level – worktop made of wood/rubber Color scheme: grey/blue, Surfaces cleaned, signs of use possible Itsdpfx Aedvlt Heh Asr Drive motor power: 1 x 3.0 kW / 400 Volt Subject to errors, technical modifications and deviations from the photos. Delivery and installation currently mainly within Germany, Austria and several neighboring countries.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Na voljo je valjasti paternoster ESKA za skladiščenje in nakladanje. Širina valjev: 1600 mm, maksimalna nosilnost: 2800 kg, skupna višina: 4300 mm. Na voljo je dokumentacija. Ogled na lokaciji je mogoč. Itodpfx Aow I E Dceh Aor

Stanje: dober (rabljeno), Leto izdelave: 1990, Kardex vertical carousel Type: Kardex Serial no.: not legible Year of manufacture: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Itjdpfow E Hh Esx Ah Ajr Tray height: approx. 235 mm Compartment load: 250 kg Total load capacity: 10,000 kg Colour: White

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zaradi prenehanja obratovanja na lokaciji Norderstedt, naprodaj v stanju, kot je, brez nakladanja. Kugler Paternoster izsekovalni stroj, primeren za Wire-O in registre Format 50 x 50 cm Vključno z 2 orodjema za izsekovanje Iedpfjrn R Rfsx Ah Aotr Zadnje znižanje cene!!!

Stanje: dober (rabljeno), Stacking bins, stackable boxes, plastic containers, Euro stacking boxes, transport baskets, stack baskets, Euro stacking containers, Euro stack containers, small load carriers, open front storage bins, shelving bins - 6,620x open front storage bins: various sizes - 771x open front storage bins, dimensions: 550/174/H110 mm - 3,483x open front storage bins, dimensions: 175/135/H110 mm - 2,112x open front storage bins, dimensions: 275/175/H110 mm - 30x open front storage bins, dimensions: 138/86/H110 mm - 172x open front storage bins, dimensions: 174/136/H96 mm - 56x open front storage bins, dimensions: 274/174/H96 mm Itsdpfxsdqc Hwe Ah Ajr Sale: only as a complete lot

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system Optional control system extension available 2 identical machines available External dimensions: Overall height: 4,730 mm Width: 3,270 mm Depth: 1,680 mm 29 carriers, each with a payload capacity of 250 kg Usable internal dimensions per carrier: Height = 215 mm Width = 2,730 mm Itodpfx Ahednhz Uj Ajr Depth = 620 mm Chain pitch: 254 mm For 0 carrier units, intermediate shelves are available, allowing a load capacity of 160 kg per usable level Intermediate shelves can be manufactured on request Deposit table at a height of 900 mm above finished floor level – worktop with V2A stainless steel cover Color: grey / grey Surface cleaned, signs of use possible Drive motor power: 2 x 1.5 kW / 400 V Subject to errors and technical modifications or deviations in photos Delivery & installation currently mainly in Germany, Austria, and other neighboring countries

Leto izdelave: 2012, Stanje: dober (rabljeno), Type: IND-PA Device no.: 0/1220744/1 Year of manufacture: 2012 Device height: approx. 5600 mm Device width: approx. 2870 mm Device depth: approx. 4000 mm Number of rollers: 45 Roller width: approx. 2370 mm Compartment load capacity: 200 kg Ijdpshyhlgjfx Ah Ajtr Total load capacity: 9000 kg Colour: beige

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG control system StoreControl P External dimensions: Construction height: 5000 mm Construction width: 2650 mm Construction depth: 1250 mm plus 300 mm storage table Itodpfxodnfdlo Ah Ajr 34 carriers, each with a payload of 140 kg with clear usable dimensions: Height = 220 mm Width = 2220 mm Depth = 410 mm Chain pitch: 254 mm Storage table positioned 1000 mm above finished floor level, equipped with a wooden worktop Color: GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 1.8 kW / 400 Volt Subject to errors and technical modifications Delivery and assembly currently mainly in Germany, Austria, and several neighboring countries

Stanje: dober (rabljeno), Leto izdelave: 2003, Kardex Vertical Carousel Model: SYS-120-1414 Serial No.: 03001086/001 Year of manufacture: 2003 Itodpfx Ahoq I R D No Aor Device height: approx. 3,110 mm Device width: approx. 2,950 mm Device depth: approx. 1,150 mm + 300 mm for tabletop Number of trays: 14 with 7 additional drawers Tray width: approx. 2,630 mm Tray depth: approx. 320 mm Tray height: approx. 330 mm Shelf load capacity: 100 kg Total load capacity: 1,400 kg Colour: white

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Overall height: 4340 mm Overall width: 3270 mm Overall depth: 1680 mm 26 carriers with a load capacity of 250 kg each Usable internal dimensions per carrier: Height: 215 mm Width: 2730 mm Depth: 620 mm Chain pitch: 254 mm For 0 load supports, intermediate shelves are available, load capacity then 120 kg per usable level Intermediate shelves can be manufactured upon request Deposit table at 900 mm above finished floor level - worktop with V2A stainless steel cover Colour: grey/grey Surface cleaned, signs of use and minor deformations possible Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors, technical modifications or minor deviations in the illustrations, Photos show a similar machine, Isdpfxjdnh R Ho Ah Ajtr Installation currently primarily in Germany, Austria and some neighboring countries.

Leto izdelave: 2003, Stanje: dober (rabljeno), Type: TLI 4500/2044 Device no.: 03502 Year of manufacture: 2003 Device height: approx. 4500 mm Device width: approx. 2000 mm Isdpfx Ashyhlkeh Ajtr Device depth: approx. 7010 mm Number of rollers: 44 Roller width: approx. 1680 mm Shelf load: 150 kg Total load capacity: 7000 kg Superstructure, see photo: 3000 mm Colour: beige

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system External dimensions: Overall height: 6,010 mm Overall width: 3,501 mm Overall depth: 1,774 mm 25 carriers, each with a payload of 628 kg Usable internal dimensions: Height: 359 mm Width: 2,880 mm Depth: 628 mm Chain pitch: 406 mm Deposit table at 1,000 mm above finished floor level with worktop / plastic surface Colour: light grey, surface cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 V Additional features: Itjdpfohfxkajx Ah Aor automatic chain tensioning, various intermediate shelves, subject to errors and technical modifications Delivery and installation currently mainly in Germany, Austria and several neighboring countries

Stanje: dober (rabljeno), Leto izdelave: 1990, Megamat Vertical Carousel Model: 112-350-13 Serial No.: 7479 Year of Manufacture: 1990 Device Height: approx. 2950 mm Device Width: approx. 2675 mm Device Depth: approx. 1130 mm + 280 mm table surface Number of Shelves: 13 Shelf Width: approx. 2160 mm Shelf Depth: approx. 295 mm Shelf Height: approx. 330 mm Itedpev Ewn Defx Ah Ajr Shelf Load Capacity: 100 kg Total Load Capacity: 1,300 kg Colour: beige

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system External dimensions: Installation height: 5,860 mm Width: 2,940 mm Depth: 1,180 mm 25 carriers, each with a load capacity of 165 kg Usable dimensions per carrier: Height = 380 mm Width = 2,500 mm Depth = 410 mm Chain pitch: 412 mm Total load capacity up to 4,110 kg Retractable tray positioned 1,000 mm above FFL (Finished Floor Level) with a rubberized work surface Color scheme: GREY / BROWN, surfaces cleaned, signs of wear possible Drive motor output: 1 x 1.8 kW / 400 Volt Itjdpfx Aednzg Njh Asr Base machine for this modernization: Kardex SYS 180 Subject to errors, technical changes, and deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries