Parni Čistilni Sistemi nakup rabljenega (8.477)

Stanje: novo, Length 1900 mm Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 m Capacity 600 l Kodpfxsfrztfs Abhsnd These containers are chip bins! - Powder-coated in RAL 6011 green - Tipping mechanism - Discharge device - Tipping safety lock and forklift pockets.

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! Knodpokwct Ujfx Abhsd ✈️ Plus shipping costs – shipping available on request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important Notice: If you would like a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a range of financing solutions to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion starts with perfect preparation – Chemical pretreatment systems from PROTON ◄ Before the coating can reach its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure every contaminant – whether oil, dirt, or oxide – is reliably removed. Only then is long-lasting corrosion protection and excellent paint adhesion possible. Every product requires a tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop bespoke solutions for your requirements. Our pretreatment systems – whether spray or immersion – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction from chemical-resistant stainless steel or plastic Our promise: Tailor-made technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimal pretreatment system. We take all key parameters into account – from heating performance to water circulation, steam separation, and chemical separation. The spray washing lines integrate seamlessly into your conveyor system. All washing, rinsing, and drying processes are fully automatic and efficient – ready for perfect coating. Available systems: ✳️ Spray and immersion pretreatment lines ✳️ Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️ Degreasing and pickling plants ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified, and ATEX certificates are available for the required machines.☀️

Stanje: novo, Connection voltage: 230 V Battery: 24V / 100Ah Brush diameter: 510 mm Rotation speed: 175 rpm Vacuum airflow: 24 L / s Tank capacity: 50 / 50 litres Weight: 160 kg Dimensions (L x W x H): 1,100 x 520 x 1,000 mm KREMER floor cleaning machine: Supplied with battery and charger Theoretical area performance: Knsdpjvu Hccefx Abhed Output: 2,000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area gradient: 2 % Clean/dirty water tank capacity: 50 / 50 L

Stanje: zelo dobro (rabljeno), Steam washer for crates/containers 60x40 Brand: Maskinfabrikken Hillerslev a/s Plastic chain Belt width: 350 mm Kjdpfx Aev Ey Ugobhond Clearance: 650 mm x 200 mm Overall dimensions: 7300 mm x 1500 mm x 2000 mm

Stanje: novo, FIRE PREVENTION SYSTEMS FOR DUST EXTRACTION AND AIR FILTRATION PLANTS Components for spark detection and extinguishing systems in air extraction ductwork. Configurable systems for spark detection and water extinguishing in ducting. Knodpfx Asv Ny Inebhod Detection, extinguishing, and compartmentalization systems for dust extraction and air filtration installations. DESIGN, SALES, AND INSTALLATION

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, številka stroja/vozila: 134, 1 x Langhi Sistemi Srls enoglavna linearna tehtnica. To tehtnico je mogoče namestiti na stojalo ali uporabljati kot namizno enoto. Odlična je za tehtanje majhnih zrnastih izdelkov, kot so kava, testenine, riž, fižol ali leča. Tehnične specifikacije: Model – LS RCT1. Serijska številka – 134. Leto izdelave – 2023. Tehtalno območje – 50 g do 3000 g. Hitrost – do 20 izpustov/min, odvisno od teže in proizvoda. Kapaciteta lijaka – 4,5 litra. Upravljanje – PLC krmiljenje z 7'' zaslonom na dotik. Električni priključek – 230 V / 50–60 Hz / 1 faza. Lastnosti: Ta linearna tehtnica omogoča shranjevanje do 10 prednastavljenih programov za različne izdelke. Stanje: Odlično, tehtnica je bila zelo malo uporabljena. Ksdpewrnacjfx Abhend

Stanje: novo, Leto izdelave: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 1000 x 1000 Working height: 93-103 cm Product Specifications Welding Tables - Tabletop size: 1000 mm x 1000 mm - Surrounding reinforcement edge, 140 mm high, fitted with a double row hole grid. - Hole grid spacing is 100 mm x 100 mm center-to-center. - Equipped with necessary reinforcement ribs along both width and length. - Table material: S355, pickled and oiled. - Feet are fitted with ball joints and are height-adjustable. - The welding table is oiled and pickled, providing a smoother working surface and increased resistance to welding spatter. - Plate thickness: 12 mm Additional options: • Engraved lines: 80¤ • 16 mm hole diameter: 100¤ Knedpfxeukkr Ae Abhed • 28 mm hole diameter: 100¤ • Diagonal hole grid 50x50: 100¤ • 4 adjustable castors: 360¤

Stanje: novo, Leto izdelave: 2024, Hole diameter: 20 mm Dimensions (LxWxH): 2480 x 1200 x 930-1003 mm Table width: 1200 mm Table length: 2250 mm Working height: 930 - 1003 mm Plate thickness: 12 mm Product Specifications – Welding Tables - Plate size: 2480 mm x 1200 mm - All-round reinforcement rim, 140 mm high, fitted with a double-row hole grid. - The hole grid is spaced 100 mm x 100 mm (center to center). - Equipped with the necessary reinforcing ribs across width and length. - Table material: S355, pickled and oiled. - The legs are fitted with ball joints and are height-adjustable. - The welding table is oiled and pickled, creating a smoother work surface and making the table less susceptible to weld spatter. Additional Options: Engraved guide lines: €85 Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Diagonal hole pattern 50x50 mm: €250 4 adjustable castors: €360 Knedpoukkrvofx Abhsd The welding tables with feet and rollers are height-adjustable. Working height from 92 to 93 cm. The legs can be adjusted up to 10 cm higher. A welding table with adjustable rollers has a minimum working height of 87 cm. The rollers can be set to a maximum working height of 100 cm.

Stanje: novo, Leto izdelave: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 2250 x 1000 x 1000 mm Table width: 1000 mm Table length: 2250 mm Working height: 93–103 mm Tabletop thickness: 12 mm Medium-duty welding table Product Specifications – Welding Tables - Plate size: 2250 mm x 1000 mm - All-round reinforcement edge, 140 mm high, fitted with a double-row hole grid - Hole grid: 100 mm x 100 mm center-to-center - Equipped with required reinforcement ribs along width and length - Table material: S355, pickled and oiled - Legs equipped with height-adjustable ball joints - The welding table is oiled and pickled for a smoother working surface and reduced susceptibility to weld spatter Additional options: Knsdpfeukkr Nsx Abhsd Engraved grid lines: €75 Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Diagonal hole pattern 50x50: €150 4 adjustable castors: €360

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. Ksdpfxofk Aife Abhend When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Approx. weight: 850 kg Special worktable systems from the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient assembly, welding, and bonding of constructions such as fixtures, railings, frames, etc. With the help of the extensive range of clamping accessories (see catalog section 'Welding Table Accessories'), these table systems can also be used as flexible, reconfigurable fixtures, enabling high-quality production of small to medium batch sizes. The special worktables feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop with a Ø28 mm hole grid. Additionally, the tabletop offers a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation supports the use of various clamping and positioning elements. Kodsfk Aigepfx Abhend For special applications, the tabletop surface can, upon request and deviating from the standard, be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be cost-effectively replaced in case of wear, making the table system particularly sustainable and durable. Price must be requested from the manufacturer prior to order! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Kjdpfxsfk Aihs Abhjnd Dimensions (LxWxH): 2480 x 1230 x 800 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 650 kg Special work table systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalogue section welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality manufacturing of small and medium production runs. The special work tables feature a worktop with either a 16 mm thickness (dual Standard) or 25 mm (triple 24+1) thickness, equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The hole pattern allows the use of various clamping elements and fixing aids. For special applications, the tabletop surface can, on request, be fitted with stainless steel 1.4301, aluminium, plastic, or high-strength materials such as ST70, as an alternative to the standard version. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This makes the table system particularly sustainable in the long term. Price must be requested from the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Knedpfx Absfk Aivohsd Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Knsdpfxofk Ai De Abhod Table width: 950 mm Table length: 1950 mm Weight approx.: 355 kg Special workbench systems of the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be flexibly configured as fixtures, enabling high-quality manufacturing of small and medium batch sizes. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern of the table allows for the use of a wide variety of clamping elements and positioning aids. For special requirements, the tabletop surface can also be supplied, upon request, in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, instead of the standard option. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of wear, which ensures the table system remains sustainably reusable. Price needs to be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Special workbench systems from the SST, SFT and SWT series (fixed series) serve as 3D clamping workstations for the efficient production of assemblies, welded structures, and bonded constructions, e.g. jigs, railings, frames, etc. With the help of the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, thus enabling the high-quality production of small and medium series. Knjdpfxegrvwfs Abhjd The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. In addition, the table top is marked with a 100 x 100 mm grid for easy alignment of workpieces or fixtures. The table perforation allows for the use of various clamping elements and positioning aids. For special applications, the table top surface can, as an option to the standard, also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures long-term sustainability of the table system. Price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1450 x 950 x 800 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 288 kg Kjdsfkzcvopfx Abhond Special worktable systems from the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see the welding table accessories section in the catalogue), these table systems can also be used as flexible, reconfigurable fixtures. This enables high-quality manufacturing of small and medium-size production runs. The special worktables feature a 16 mm (dual Standard) or 25 mm (tripple 24+1) thick worktop, equipped with a Ø28 mm hole matrix. In addition, the table surface has a 100 x 100 mm grid marking for easy alignment of workpieces or jigs. The table hole pattern allows the use of a wide variety of clamping and positioning elements. For special applications, the table surface can, if required, be supplied in stainless steel 1.4301, aluminium, plastic, or high-strength materials ST70, differing from the standard version. Due to the fully screwed construction of the clamping plate, the work surface can later be replaced cost-effectively in case of wear. This makes the table system particularly sustainable and long-lasting in use. Price must be requested from the manufacturer prior to placing an order! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm; Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm; Table width: 1230 mm; Table length: 2480 mm; Approx. weight: 555 kg. This allows the user to flexibly adjust the working surface height to meet specific requirements, improving both efficiency and ergonomics. The height adjustment is performed as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. When used in conjunction with machining equipment, inspection or reworking fixtures (such as deburring, marking, or testing) can be adapted precisely to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools, thanks to their various mounting and securing options. Once removed from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs as needed. The fully bolted construction of the clamping plate allows for cost-effective replacement of the working surface in case of wear. Price must be confirmed with the manufacturer before ordering! Kedpfjfk Aicjx Abhond

Stanje: rabljeno, Further technical data available on request. The scrubber-dryer with a 55 cm working width and semi-automatic drive is the ideal machine for cleaning small to medium-sized areas, even those with stubborn dirt. It is designed for high productivity, low operating costs, and extremely simple operation. - Battery-powered scrubber-dryer with semi-automatic drive, disc brush, and dirty water suction - The floor is left dry and safe with just one pass - Designed for high productivity, low operating costs, and very simple use - Automatic squeegee release on accidental impacts protects against damage - Yellow-colored maintenance points for quick and easy servicing - Adjustable dosing of cleaning solution - Automatic water and brush stop when the machine is not in operation - Mechanical operation of brush and squeegee via levers Knedpfel Iir Sjx Abhsd Cleaning area: 1,000–1,600 m² Theoretical productivity: 1,450 m²/h Working width (brushes): 510 mm Working width (suction): 680 mm Packaging unit: 1 Dimensions & weights: Length: 1,165 mm Width/depth: 541 mm Height: 995 mm Weight: 61.5 kg Brushes Brush diameter: 510 mm Brush pressure: 27.5 kg Brush speed: 160 rpm Electrical connection Total power: 870 W Power supply: 24 V battery Battery runtime: 240 min Battery charging time: 12 h Operating voltage: 24 V Tanks Fresh water: 40 l Dirty water: 42 l

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 945 kg This enables the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within the range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 hole grid. Used in combination with machining equipment, the table allows test or finishing fixtures (deburring, marking, or inspection) to be adapted to the height of the machine's clamping table. The table systems can be relocated easily using a pallet jack. These mobile systems, with their various fastening and safety features, have proven ideal for the maintenance of injection molding and die-casting tools. After removal from the machine, tools can be serviced safely on-site and transported to maintenance for repairs. The fully bolted construction of the clamping plate allows for the cost-effective replacement of the work surface in case of wear. Price must be obtained from the manufacturer prior to ordering!! Kedofk Ainopfx Abhond For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 630 kg This enables the user to adjust the working surface height flexibly to the respective requirements, improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic system within a range of 800 mm (on request, other heights available). Like the SST fix series, the worktop is equipped with a 100 x 100 mm Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing fixtures (deburring, marking, checking) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet jack. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on site and then transferred to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Knedsfk Aipspfx Abhed Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 358 kg Kodpfx Absfk Ai Ajhjnd This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The worktop, as with the SST Fix series, also features a 100 x 100 mm Ø 28 perforated grid. When used in combination with processing machines, inspection or reworking fixtures (deburring, marking, checking) can be adapted to match the clamping table height of the machine. The table systems are easily relocated using a pallet jack. These mobile systems, with various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 375 kg Special workbench systems of the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g., fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium batches. The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop featuring a Ø28 mm hole grid. Additionally, the tabletop comes with a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows for the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be supplied, deviating from the standard, in stainless steel 1.4301, aluminum, plastic, or even in high-strength ST70 materials. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively when worn, ensuring the table system remains especially sustainable in use. Ksdpfxefk Ai Eo Abhend Price must still be requested from the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Knsdpefk Aimefx Abhsd Table length: 1980 mm Weight approx.: 481 kg Special workbench systems of the SST, SFT and SWT fixed series are 3D clamping workstations designed for efficient manufacturing of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the help of a comprehensive range of clamping accessories (see catalog section Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the table top includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows the use of a wide variety of clamping elements and positioning aids. For specific applications, the table surface can be optionally supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, instead of the standard. Thanks to the fully bolted design of the clamping plate, the work surface can be economically replaced in case of wear. This ensures the table system remains particularly sustainable in long-term use. Price must be requested from the manufacturer prior to ordering! For accessories and more information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1450 x 950 x 800 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 315 kg Kedpfx Aofk Ai Hebhjnd Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. Using the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures, allowing for high-quality manufacturing of small and medium batch sizes. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, each equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for simple alignment of workpieces or fixtures. The grid system allows the use of a wide range of clamping elements and positioning aids. For special applications, the tabletop surface can, as an option, be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials like ST70, deviating from the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear, thus making the table system sustainably usable. Price must be confirmed with the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 630 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and adhesive constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalog section: welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small to medium series. Knodpfx Abofk Ailshed The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick working surface equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, in deviation from the standard. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. This design makes the table system especially durable and sustainable in use. Price must be reconfirmed with manufacturer before ordering!!