Krmilniki za skladiščna dvigala in paternosterje

LTG-StoreControl

Stanje: novo, Leto izdelave: 2025, Spray-Flood Cleaning System – Parts Cleaning Machine Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, oscillate, or rotate during the cleaning cycle (freely selectable via the program). Drying via hot air and vacuum drying. Basket usable dimensions (LxWxH): 600 x 400 x 300 mm Maximum load weight: 150 kg Loading table in front of the machine included Ndsdpfjhu Sg Isx Aated Control: Siemens S7-1200 with 20 programs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 13.450 mm, skupna širina: 4.135 mm, skupna dolžina: 3.092 mm, nosilnost na odsek shranjevanja: 400 kg, vhodna napetost: 400 V, nosilnost: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13.450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of Manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid subject to prior sale. Technical details per Logimat unit: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum number of trays (approx.): 91, each 400 kg, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint (approx.): 12.8 m2 - Capacity with 91 trays: approx. 269 m2, each tray approx. 2.95 m2 - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if desired. Photos and videos of operation and dismantling are available on request via email. Price: special export price Price: excl. VAT Ndedpfjru A Atex Aated Delivery time: in stock We have 3 Schäfer Logimat units in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Stanje: rabljeno, Leto izdelave: 2014, DOOSAN DNM 650 II MACHINING CENTRE YEAR OF FIRST INSTALLATION: 2014 CNC: SIEMENS SINUMERIK 828 D TABLE DIMENSIONS: 1,300 mm x 670 mm MAX. TABLE LOAD: 1,000 KG TRAVEL STROKES: - X: 1,270 mm - Y: 670 mm - Z: 625 mm TOOL MAGAZINE: 30 POSITIONS TAPER: ISO 40 MAX. SPINDLE SPEED: 12,000 RPM Nodpfx Ajwcg I Tjatsdd INTERNAL SPINDLE COOLANT / HIGH PRESSURE SPINDLE MOTOR POWER: 15 KW MACHINE IN PERFECT CONDITION COMPLETE WITH FULL DOCUMENTATION WEIGHT: 8,500 KG

Stanje: rabljeno, Leto izdelave: 2000, Grinding length 1600 mm Grinding width 600 mm Workpiece height 500 mm Total power requirement 50 kW O F F E R We can offer you, ex-stock and subject to prior sale and errors: B L O H M CNC-controlled precision surface grinding machine Ndodpfjt Hxcbox Aatod Type PLANOMAT 616 with SIEMENS 840 D control Year of manufacture: 2000 Serial no. 14 67x _____ _____ Grinding range: 1,600 x 600 mm (!) Table size: 2,000 x 600 mm Working height under grinding wheel: approx. 150–500 mm Max. longitudinal travel (X axis): 1,700 mm Max. vertical travel (Y axis): 550 mm Max. cross travel (Z axis): 560 mm Maximum workpiece weight: approx. 800 kg Table speed (X axis): 30 – 30,000 mm/min Minimum transverse increment (Z axis): 0 – 4,000 mm/stroke Vertical increment (Y axis): 0.001 – 0.099 mm/stroke Feed rate Y/Z axes: 4 – 4,000 mm/min Grinding wheel Ø x width: approx. 400 x 100 mm Grinding wheel speed, continuously variable via GS motor: 300 – 1,250 rpm Spindle drive max.: approx. 27.5 kW Total power supply: approx. 50 kW - 400 V, 50 Hz Weight, total: approx. 10,000 kg Accessories / special equipment: • SIEMENS CNC control type 840 D with monitor; SIEMENS components, and WINDOWS-based interface Model MMC 103/PCU 50 with user guidance for direct input of all grinding parameters for roughing/finishing/sparking out as well as for slot grinding with (cross) indexing device and automatic shut-off after reaching grinding depth and return to home position; grinding wheel management, dressing programs/cycles, hand control, etc. • All axes driven by ball screw spindles, DITTEL touch control • Continuously variable grinding spindle speed via direct GS motor • Table-mounted diamond wheel dressing device type PEA, electrically driven, with DITTEL inductive device and separate straight dressing unit with diamond fleece, with compensation, dressing cycles integrated in the control • Fitted magnetic chuck approx. 500 x 1,500 mm by WAGNER with demagnetizing function • Fitted electrical cabinet, separate flanges with wheels, and independent oil mist extraction system; complete work area enclosure with one sliding door with glass insert • Large HOFMANN coolant system TECHNOPUR S 300 with cooling aggregate and grinding sludge conveyor, tank 1600 l resp. 1280 l, separate oil mist extraction, etc. Condition: Good to very good – demonstration available soon; extremely large and stable machine (!) Delivery: ex stock – as inspected Payment: net cash – upon receipt of invoice We look forward to receiving your order and have additional grinders of all kinds in stock. Please enquire.

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system Optional control system extension available External dimensions: Construction height: 8,700 mm Ndeded Spf Rjpfx Aatod Construction width: 3,500 mm Construction depth: 1,580 mm 51 carriers, each with 350 kg payload Usable clear internal dimensions: Height = 255 mm Width = 3,050 mm Depth = 520 mm Chain pitch: 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Deposit table at 990 mm above finished floor level with stainless steel (NiRo) worktop, depth 315 mm Colour finish: grey Drive motor power: 1 x 3.8 kW / 400 Volt Subject to errors and technical modifications, Surfaces cleaned, signs of use and minor deformations possible Delivery & installation currently primarily in Germany, Austria and other neighbouring countries

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, laserska moč: 3.000 W, X Working Area max.: 2500 mm Y Working Area max.: 1250 mm Control: IndraMotion MTX Laser Power: 3000 Watt Standard Equipment: Machine - Coordinate guides for highly precise machining - Sturdy, easily accessible C-frame - Linear tool magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning unit with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF Laser - Solid-state laser TruDisk 3001 with 1 fiber outlet - Excitation via pump diodes - Fiber cable according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting Head - Solid-state laser compact cutting unit - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / repositioning) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level on the punching console - Level monitoring for thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management - Production planning - Integrated technology data - Remote teleservice via Internet - Programmable cutting gas pressure - Automatic shut-off with wake-up mode Ndodpfxowld Suo Aatod Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology - SoftPunch function - StripLine - Lowerable die - Spray lubrication die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warp detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction device - Vacuum sensors for each suction cup - Double sheet detector for double sheet check - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing for machine - Simultaneous loading and unloading during main operation - Peeling system incl. positioning aid for medium format (2500x1250) - First standard auxiliary suction package - Second standard auxiliary suction package - Unloading monitoring for laser parts GripMaster - Parts conveyor belt, punching station - Parts conveyor belt, laser station ToolMaster with 70 stations (punching mode only) - Simultaneous tool change during main operation (ToolMaster)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, skupna masa: 250 kg, nosilnost: 16 kg, We at Binici MB GmbH have additional industrial robots available in-house. All of our robots are fully operational and come with complete accessories. Ndsdpfx Aasv Diuystsd We are happy to provide you with expert advice.

Stanje: delavnici obnovljeno (rabljeno), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with 500 kg load capacity in usable clear internal dimensions: Width: 1,300 mm Depth: 863 mm Height: from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operator opening at 870 mm above finished floor level, then 845 mm high Colour scheme: GREY / BLUE, carriers hot-dip galvanized (Sendzimir process) Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Ndedpfx Asn D A Rrsatsd Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manually operated lift door Subject to errors, technical modifications, detail deviations from photos Delivery & installation currently primarily in Germany, Austria, and other neighboring countries

Stanje: novo, FSE lift repair kit for all types The assembly for height detection, object protection, and safety evaluation unit by Cedes has been discontinued by the manufacturer and can therefore no longer be procured as new. We have developed a replacement control unit for these devices, ensuring continued operation for years to come. In this context, we provide spare parts, such as the Cedes Safe C200 CAN, for immediate repair by our technicians—available on a loan basis and free of charge until the control unit is replaced. This allows the lift to remain operational and the control replacement to be scheduled accordingly. Of course, we can also repair and modernize all other dynamic storage systems. We are happy to provide you with a detailed quotation! Nedpoiwc Rlefx Aatjdd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Travel X/Y/Z: 630mm/530mm/465mm, Tool holder: SK40, Spindle speed: 12,000 rpm, Tool stations: 32, Table size X/Y/Z: 920mm/540mm, Machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, Weight: approx. 6,500kg. Documentation available. On-site inspection is possible. Ndedpfowm Nphex Aatsd