Plum nakup rabljenega (202)

Stanje: dober (rabljeno), Leto izdelave: 1994, Swing diameter 410 mm Turning length 495 mm Control Philips CNC 532 Swing diameter above cross slide 220 mm Speed range 20 - 6000 rpm Spindle nose A2-5" Turret (positions) 12 Spindle bore 42 mm Psdpfxjv S Iq Nj Aafsrc Operating hours 12,760 h Tailstock quill taper MK 3 Quill stroke 80 mm Quill diameter 55 mm Total power requirement 11.3 kW Machine weight approx. 3 t Space required approx. 2 x 2.15 x 1.8 m Very well maintained CNC lathe for single-part production in special-purpose machine building, equipped with a 12-position turret and a comprehensive range of accessories — fully equipped. This is a used machine, therefore we sell it without any warranty. STOCK-HOLDING DEALER WITH OWN 1,600 m² WAREHOUSE.

Stanje: rabljeno, Length: 710 mm Height: 580 mm Amperage up to 500 A Prodpfovmih Eox Aafsc Connected load at 60% duty cycle: 27.5 kVA Connected load at 100% duty cycle: 21.4 kVA Stepless adjustment of welding current: yes Voltage: 380 V Machine weight: approx. 93 kg Required space: approx. 1 x 1 x 2 m Electric arc welding machine on rolling rack, supplied with accessories such as torch package, plenty of electrodes, and protective visor. Suitable for stick electrode welding. The machine was only ever used in a repair workshop, approximately 3 times a year, so it has seen very little use. This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1600 m² SHOWROOM.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, X travel: 1016 mm y travel: 610 mm z travel: 760 mm Controller: Heidenhain iTNC426/430M Table size: 1270 × 590 mm Max. table load: 900 kg Tool holder: ISO 40 Distance spindle nose to table: 80 - 840 mm Distance spindle center to column: 635 mm Feeds x/y/z – infinitely variable: 3000 rpm Rapid traverse: 20 m/min Operating hours: 34,307 h Spindle speeds: 8,000 rpm Pedpfxevzhhae Aaferc Spindle motor: 11 kW Tool changer, number of tools: 24 Tool change time: 8 sec Max. workpiece length: 300 mm Max. tool weight: 8 kg Machine weight approx. 6.7 t Space requirements approx. 2.75 x 2.12 x 3.3 m 3-axis machining center, manufacturer ZPS/Depo, equipped with Heidenhain iTNC426/430M control and 24-position tool changer. Total program run time: 34,307 hours. This is a used machine; therefore, we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1,600 m² WAREHOUSE.

Stanje: novo, Leto izdelave: 2024, Sheet width: 1020 mm Sheet thickness: 2.5 mm Frame width: 1045 mm Max. opening width: 47 mm Max. bending angle: 135° Machine weight: approx. 290 kg Space requirement: approx. 1.35 x 0.86 x 1.17 m Prjdpfxewgn Amo Aafsc Unused exhibition machine at special price: Manual folding/bending machine with segmented upper beam for bending box profiles, max. flange height approx. 64 mm, upper beam clamping operated by foot pedal, manual bending beam operation with weight compensation, adjustable bending stop, adjustment of bending radius by altering the bending beam. This is an exhibition machine offered at a special price, therefore we sell it with exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: novo, Capacity: 750 kg Max. workpiece size: 900 x 300 mm Total workpiece weight: 550 kg Max. workpiece weight: 30 kg per piece Pjdpfjv S Iq Asx Aafsrc Rotational speed: 22 rpm Filling ratio: 50-60% Colour: blue, RAL 5015 Opening: 1775 x 440 mm Total power requirement: 3 kW Machine weight approx. 1,995 kg Space required approx. 2.9 x 1.33 x 1.75 m New scouring or deburring drum / deburring machine for safe and efficient deburring of workpieces. Suitable for heavy-duty applications. Hexagonal drum lined with durable, vulcanised rubber (thickness: 36 mm), closure lid with gas pressure springs, safety shutter to protect from rotating drum, robust design, easy to operate. Control via timer on the operator panel, main switch and emergency stop switch included. Maximum fill volume is 40% of drum capacity, equal to 750 kg (comprising 550 kg of workpieces + 200 kg deburring media). Includes 200 kg of high-manganese steel balls or alternatively, cast iron pentagons (available from Sideros). Special accessories: - Infinitely variable rotational speed via frequency inverter, approx. 13 - 22 rpm (€3,200) - Soundproof enclosure (65/70 dB, see photo 9) and Sideros ECO B2 dust extraction unit (see photo 8) available at extra cost. The manufacturer recommends sending 100 kg of sample parts of the material for test deburring before order placement for complex workpieces. Otherwise, no responsibility can be accepted for the deburring result. VIDEO available on our website. Warranty: 12 months with single-shift operation. Defective parts must be returned when spare parts are sent. Machine downtime is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: novo, Capacity 750 kg Max. workpiece size 900 x 300 mm Total workpiece weight 550 kg Max. workpiece weight 30 kg per piece Rotational speed 22 rpm Filling volume 50–60% Color blue 5015 RAL Opening 1775 x 440 mm Total power requirement 3 kW Machine weight approx. 1995 kg Space requirement approx. 2.9 x 1.33 x 1.75 m New deburring drum or deburring machine for safe and efficient deburring of workpieces. Suitable for HEAVY-DUTY applications. The EVO model is available for light to medium workpieces. 6-sided drum lined with durable, vulcanized rubber, thickness 36 mm, closure lid equipped with gas struts, protective cover/shutter against the rotating drum, robust design, easy operation. Control via timer on the control panel, main and emergency stop switches. Maximum filling amount is 40% of the drum volume, corresponding to 750 kg (consisting of 550 kg workpieces + 200 kg deburring media = hardened manganese balls (200 kg included), see photo 6, or cast iron pentagons, see photo 7). These are available from Sideros. Prsdpfx Aaovv H Tdefsc Continuously variable speed adjustment via frequency inverter approx. 13–22 rpm (3,200 €). Soundproof enclosure (65/70 dB), see photo 9, and Sideros ECO B2 dust extraction system, see photo 8, are available at extra cost. The manufacturer recommends sending in 100 kg of sample parts of the material to be deburred for testing before ordering, especially for complex workpieces. Otherwise, no responsibility can be taken for the deburring result. VIDEO available on our website. Warranty = 12 months for single-shift operation; in case of spare parts shipment, the defective parts must be returned. Machine downtimes are not covered. STOCKING DEALER WITH 1600 m² SHOWROOM.

Stanje: novo, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg per piece Rotational speed: 22 rpm Filling level: 40–50% Pjdpsu Uu T Rofx Aafsrc Color: Blue RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring or scouring drum (deburring machine) designed for safe and efficient deburring of workpieces. 6-sided drum lined with 36 mm wear-resistant, vulcanized rubber. Roll-up cover for protection against the rotating drum, robust construction, easy operation. Control panel with timer, hour counter, main and emergency stop switches, and signal light. The maximum fill level is 40% of the drum volume, corresponding to 300 kg (200 kg workpieces + 100 kg deburring media such as manganese steel balls or cast iron pentagons). These are available from Sideros: manganese steel balls €400 per 100 kg & cast iron pentagons €950 per 100 kg. Dust extraction unit Sideros ECO A (see photo 8) optionally available for €1,900 + VAT. The manufacturer recommends sending 100 kg of sample material for test deburring to the Italian plant before ordering. Otherwise, the manufacturer accepts no responsibility for the deburring results. Warranty: 12 months for single-shift operation. When replacement parts are supplied, defective parts must be returned. Downtime of the machine is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: rabljeno, Leto izdelave: 2010, Wheel diameter - max. 180 mm Wheel width 40 mm Module - max. 4 Module - min. 1 The M62 is a manually operated acceptance/rejection gauge station for inspecting the standard gearing parameters on gearbox wheels. Thanks to its highly precise measuring tools and robust design, the M62 is ideally suited for quality control of gear teeth during production in workshop conditions. The M62 provides an accurate and rugged solution for rapid inspection of gear wheel teeth after machining processes such as hobbing, shaping, grinding, and honing on the production line. MARPOSS industrial PC E9066 N with WINDOWS XP and 15" LCD display Prsdpfx Aasvzh Nqsfoc with 8 or 12 measuring ports for connecting up to 12 measuring probes. This is a used machine; therefore, we sell it under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1600 m² WAREHOUSE.

Stanje: novo, Sheet width 1290 mm Sheet thickness 5 mm Pre-bending yes Prsdpfx Aaevzhgpsfoc Roll diameter 120 mm Rolling speed 1–6 m/min Total power requirement 1.1 kW Machine weight approx. 825 kg Three-roll plate bending machine with asymmetric roll arrangement, enabling pre-bending. New machine equipped with emergency stop wire, brake motor, foot-operated reversing switch, crowned rolls, adjustment of lower and bending roll via handwheel and worm gear, drive of upper and lower roll via worm gear motor, infinitely variable rolling speed by inverter, swiveling top roll. Swedish quality product. This new machine is also available in the following sizes: Working length: from 1040 to 2540 mm Max. sheet thickness (400 N/mm²): from 1 to 6.5 mm Optional extras include: conical bending device (image 2), digital display (image 4), motorized adjustment (image 5) with remote control (image 3), and hardened rolls. Accessory prices + VAT: + Hardened and ground rolls = EUR 2,650 + Digital display per axis = EUR 1,050 + Conical bending device with diagonal adjustment of bending roll, sliding shoe and handwheel with display = EUR 1,500 + Motorized adjustment for adjustment roll = EUR 3,550 + Motorized adjustment for lower roll = EUR 3,550 STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: novo, Leto izdelave: 2025, Pressure: 40 t Stroke: 250 mm Table size: 625 x 1100 mm Flat bar (flat): 200 x 20 mm Maximum pipe diameter: 2" Table height: 950 mm Prsdpfx Aasvx Dwrefsc Working speed: 9.1 – 4.7 mm/sec Return speed: 45 mm/sec Machine weight: approx. 750 kg Space requirements: approx. 1.25 x 0.9 x 1 m Total power requirement: 3 kW Oil capacity: 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure regulation UNDER LOAD with hand wheels 2) UNDERSLUNG cylinder allows 360° bending! 3) Operation from the front rather than the side 4) Patented tapered tool holder In addition, immersion depth and return point can be set via hand wheel, infinitely variable feed rate adjustment. Machines also available in the following sizes: Pressing force from 22 to 150 t, stroke from 200 to 450 mm, as well as with 2-axis control (immersion depth + lateral stop). A wide range of tooling for various applications available on request. SIMASV bending presses have been quality machines since 1957.

Stanje: novo, Table diameter: 800 mm Table load capacity: 2 t Swivel range: up to 95 degrees Torque: 1,250 Nm Pedpfok Rfwtex Aaferc Table rotation speed: 2 rpm Working height (vertical): 550 - 1,300 mm Working height (horizontal): 650 - 1,400 mm Total power requirement: 2.53 kW Machine weight: approx. 930 kg Space requirement: approx. 1.85 x 1.66 m A video is available on our website. Electrical system: 400 Volt Handheld control panel Hydraulic power unit Hydraulic positioner for continuous rotation (right and left), tilting, lifting and lowering, as well as stepless rotation via inverter. Rotatable grounding return for connecting the welding machine's ground cable. Foot pedal control and tilting up to 140 degrees available on request. Various sizes from 1,250 to 18,000 kg load capacity available in our production range. VIDEOS on our homepage. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: rabljeno, Leto izdelave: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Prsdpfx Aajvp Sd Iofec Workpiece length 200 – 640 mm Control system: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight: approx. 5 t Space requirement: approx. 8.5 x 2.8 x 2.35 m Hydraulic cutoff and double-end processing machine suitable for pre-machining of trapezoidal thread spindles as well as other round workpieces by cutting to length from bar and double-ended machining such as chamfering, facing, and drilling, with the workpiece fixed and rotating tools. Machine includes: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar magazine for bar length 2 – 3.5 m - Standard version for solid material up to 40 mm diameter - Central positioning of bar feed rollers - Bar feeder unit - Standard version feed gripper - Rotary indexing table with 4 clamping stations, model TR 300.00 - 4 pcs. base jaws, width 80/140 mm, diameter 75 mm - Rotary indexing table swivels in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized saw head positioning - Automatic saw stand positioning with hydraulic clamping - Saw blade guide - Processing unit No. 1 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Processing unit No. 2 – USP.00/M – UF - Speeds 360/720 rpm, kW 1.8/2.8 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Processing unit No. 3 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Processing unit No. 4 – USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Discharge chute - Metric scales for all adjustment movements - Hydraulic unit with SAUER SUNDSTRAND booster pump - Accumulator - Rexroth flow control valves for processing units and saw - Coolant system with filter and tank - CALPERA coolant pump - Electrical installation in separate switch cabinet. Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Flashing light for signaling machine stoppage - Central lubrication - Chip conveyor In 2011, the machine underwent an extensive mechanical overhaul to optimize positioning and centering accuracy (€25,000). Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly run in recent years; the total operating hours are estimated by the owner at approx. 24,000. This is a used machine; therefore, we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: novo, Load capacity: 2,500 kg Minimum working height: 350 mm Maximum working height: 1,850 mm Torque: 3,000 Nm Speed: 1 rpm Pjdpfxevw Du Uo Aafjrc Vertical adjustment speed: 560 mm/min Vertical adjustment range: 1,500 mm Clamping plate diameter: 600 mm Rotary movement motor: 0.75 kW Lifting motor: 1.85 kW Total machine height: 2,505 mm Weight: 1,160 kg The Syncrolift is a new electric double-column positioner with a horizontal, permanent rotary axis and height adjustment, making it ideal for welding, assembly, and maintenance work. VIDEOS available on our homepage. The workpiece positioner allows safe handling of heavy components and enables the operator to always achieve the optimal working position via the synchronized height adjustment. The manipulator is equipped with two axes and four movements: Lifting – Lowering – Rotating left – Rotating right Thanks to its special design, the column positioner can handle very large components. Taller columns (+500/+1000/+1500 mm) for processing larger workpieces are available upon request. Optional equipment includes: double-sided lifting drive, track rails in 2 m segments, wireless remote control, TCS program control, etc. The movable columns enable processing of workpieces ranging from 1 mtr. to over 20 mtr. in length. Positioners are available with load capacities from max. 2,500 kg up to max. 40,000 kg, depending on workpiece weight and dimensions. Advantages: • Ergonomic workspace • Significant cost reduction • Increased staff performance • Improved quality of machined workpieces • Processing time reduction by up to 60% • Shorter throughput times • Optimal weld seam position • Significant reduction in crane and auxiliary times • Safe handling of workpieces For a configuration tailored exactly to your requirements, we need all relevant information about the workpieces to be processed for the manufacturer’s engineering department. A questionnaire is available for this purpose. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: dober (rabljeno), Leto izdelave: 1996, Pipe diameter: 6 - 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles. Display integrated in the control panel for entering bending angles, angle detection and measurement via absolute rotary encoder, automatic return of the tool plate, rotation device with digital readout, hydraulic quick-release chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Predjvtgn Njpfx Aafjc Operating buttons: Hydraulic on/off, mode selection, clamp open/close, advance/retract clamping, mandrel in/out, bend forward/backward, lock forward/backward, mandrel lubrication, rotation device forward/backward, plate return, length stop forward, emergency stop. The machine comes from a prototype production and was only rarely used until 2000. Afterwards, the machines from this department were sold. The buyer never used the tube bending machine, so since then it has only been stored and has not been operated (original paintwork). This is a used machine, therefore we sell it excluding any warranty. STOCKING DEALER WITH 1600 m² SHOWROOM.

Stanje: dober (rabljeno), Sheet width – max. 1020 mm Sheet thickness 1.5 mm Cutting length 1020 mm Weight approx. 300 kg Space requirement approx. 1.3 x 0.8 m Manual lever shear with counterweight, length stop, sheet hold-down with quick release, mm-scale on table, extendable sheet support. Psdpfju Hq Svjx Aaforc Demonstration machine at a special price. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: zelo dobro (rabljeno),

Leto izdelave: 2005, Stanje: rabljeno,

Stanje: rabljeno,

Stanje: rabljeno,

Stanje: rabljeno, Leto izdelave: 1976,

Stanje: rabljeno,

Stanje: rabljeno,

Stanje: rabljeno,

Stanje: rabljeno, Leto izdelave: 1981, Pressure 100 t Punching cross-section in sq. mm -- Stroke 100 mm Throat depth 510 mm Working height 1100 mm Punches 31 mm diameter in 25 mm U-section flange 100-400 mm I-beam flange 80-400 mm U-section web 100-400 mm I-beam web 100-550 mm Pedpfx Ajvgnnqjaforc Punching strokes at 20 mm stroke: 60 per minute Max. sheet thickness for air bending: 10 mm Total power requirement 7.5 kW Machine weight approx. 2.4 t Space requirement approx. 1.7 x 0.9 x 2.3 m Heavy-duty hydraulic punching machine. This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: rabljeno,