Plinski Motor nakup rabljenega (29.740)

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, Funkcionalnost: omejena funkcionalnost, število valjev: 12, nazivna moč: 275 kW (373,90 KM), vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: voda, Ponujamo rabljeni plinski motor MAN E3262E302, letnik 2017. Dodpfx Ajx Saqgjfljul Leto izdelave: 2017 Tip: E3262E302 Serijska številka: 81147448124783 Tovarniška številka: 5077783 Nazivna moč: 275 kW Število obratov: 1500 1/min Temperatura okolice: 25 °C Višina postavitve: 100 m Za dodatne informacije ali vprašanja nam pišite ali nas pokličite.

Stanje: generalkompletno obnovljen (rabljeno), Complete Overhaul of Gas Engine As part of the general overhaul, the following activities are performed: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Crankshaft and crankcase reconditioning - Cylinder liners, piston rings (pistons if required) - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injection nozzles and injection lines Dedex Huxuopfx Aflsul - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper Additionally, the following are inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears Scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds, without collector pipes -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine control and ignition system -without charge air line The engine is equipped with the following sensors: -engine oil temperature sensor -engine oil pressure sensor -speed sensors (2 units) -ignition signal transmitter This is a manufacturer-refurbished item. Note: Refurbished parts are those that, in addition to functional testing, have been inspected for visible defects, and defective parts have been repaired or replaced. All replacement engines delivered by or via agriKomp GmbH require the return of a used part of the same type. Failure to return the used part within 8 weeks from the exchange date will result in an additional charge of €10,000.

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 69.000 h, Funkcionalnost: omejena funkcionalnost, moč: 625 kW (849,76 KM), vrtljajska hitrost (min.): 1.500 obr/min, vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, delovne ure: 69.000 h, Motor z generatorjem je demontiran iz obstoječega kontejnerja. Prodaja se samo motor z generatorjem in pripadajoča krmila omara. Vsi servisi so bili redno izvedeni s strani Jenbacher serviserjev, saj smo imeli sklenjeno vzdrževalno pogodbo. Zadnji cečji servis je bil opravljen pri 50.000h, menjana je bila tudi turbina. Duedpfx Afow Dn Spjlol Je v dobrem stanju, shranjen v skladišču.

Stanje: novo, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: s.n, 7B0106, razporeditev 102-9407 352 kW 1500 o/min NOVO NIKOLI UPORABLJENO popolno z aktuatorjem Dusdpfx Aoxv Er Isfljl

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 81159538275956, moč: 275 kW (373,90 KM), število valjev: 12, vrtljajska hitrost (min.): 1.500 obr/min, skupna masa: 1.763 kg, Dostępne moduły gazogeneratorowe na bazie MAN. Ilość dostępna – 23 sztuki. Stan: nieużywane (fabrycznie nowe) Na podstawie osobnych ustaleń dla potencjalnych nabywców oferujemy usługę przebudowy tych silników na wersje zasilane gazem ziemnym lub olejem napędowym. Modele silników: MAN V12X-2200 • 12 cylindrów, pojemność 29,6 l • Średnica cylindra 138 mm, skok tłoka 165 mm • Moc 1618 kW MAN V12X-2000 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc 1471 kW MAN V12-1900 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc 1397 kW MAN V12-1650-1800 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc: V12-1650 – 1213 kW, V12-1800 – 1324 kW MAN V12-1550-1400 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc: V12/1550 – 140 kW – 1213 kW, V12/1400 – 1029 kW Silniki MAN wysokoprężne do żeglugi komercyjnej MAN D3872 (EKSPLOATACJA LEKKA I ŚREDNIOCIĘŻKA) • 12 cylindrów, pojemność 29,6 l • Średnica cylindra 138 mm, skok tłoka 165 mm • Moc 1471–1618 kW / 1213 kW MAN D2862 DUAL FUEL (EKSPLOATACJA ŚREDNIOCIĘŻKA) • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 157 mm Djdpexcudaofx Afloul • Moc 794 kW MAN D2862 (EKSPLOATACJA LEKKA, ŚREDNIOCIĘŻKA I CIĘŻKA) • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 157 mm • Moc: 1029–1471 kW / 749–1066 kW / 551–735 kW Silniki pomocnicze MAN MAN D2862 • 12 cylindrów, pojemność 24,24 l • Średnica cylindra 128 mm, skok tłoka 157 mm • Moc: 600–800 kW

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Available as either natural gas or biogas engines from manufacturer MAN. Model: E3262LE212 Standard Scope of Supply: - Four-stroke gas engine based on MAN design Individual cylinder heads with 4-valve technology, underslung camshaft and roller tappets - Engine width: 1,243 mm - Engine length: 1,748 mm - Engine height: 1,500 mm - Compression ratio 14:1, special gas - Speed: 1500 rpm - Oil module consisting of cooler, filter, and crankcase ventilation One oil module per cylinder bank Factory-integrated crankcase ventilation - Oil pump: rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1, flywheel I = 2.49 kgm² with ring gear - Starter 24 V / 7.0 kW - Camshaft with encoder disk for electronic ignition system - Dry exhaust pipe with touch protection - Exhaust turbocharger with water-cooled turbine housing, water-cooled bearing pedestal, and pressure lubrication - Two-stage mixture cooler - Mechanical throttle valve (without actuator) in front of mixture cooler - Lubrication oil sump with 102 l capacity and filling neck - Without thermostat housing - Cover for front crankshaft end - 2x exhaust gas temperature sensors - 1x coolant temperature sensor – inlet - 1x coolant temperature sensor – outlet - 2x oil pressure sensors - 2x oil temperature sensors - 2x connection cables for exhaust gas temperature sensor, length 5 m - 4x connection cables for temperature sensors, length 5 m - 2x connection cables for oil pressure sensors, length 5 m - Engine mounting feet GS Dusdpfstpw Dfox Aflsl - Standard MAN factory release for natural gas “H” or optionally biogas - Supplied without oil fill - Engine openings closed with cover caps - Type plate German / English - Paint finish, light grey RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensors 1x coolant temperature sensor – inlet 1x coolant temperature sensor – outlet 2x oil pressure sensors 2x oil temperature sensors

Stanje: novo, Available in the following power configurations: 2x Liebherr G9512 --> 1060kW 4x Liebherr G9512 --> 2120kW 4x Scania DC13 ETA --> 1060kW 4x Scania DC16 ETA --> 1400kW Dusdpfx Afsx Hqw Telol agriKomp GmbH stands for over two decades of experience in the development and production of CHP units for biogas as well as components for green gases. At our Merkendorf site, we manufacture state-of-the-art plants setting benchmarks in efficiency, durability, and reliability. Our production is ISO 9001-certified, a member of the German Biogas Association (Fachverband Biogas e.V.), and part of a Europe-wide network of experienced service partners ensuring smooth commissioning and long-term support. 1. System availability >97% provides maximum operational reliability thanks to multiple gen-sets and their quick-swapping capability! 2. Maximum flexibility and highest efficiency from partial load to peak power: Whether for partial load and consistent heat supply during extreme weather, or peak performance during electricity price spikes 3. Additional revenues on the intraday market: Intraday electricity price peaks can be utilized via direct marketer without efficiency losses 4. Best-price guarantee: Purchase & full-service contract 5. Automotive-grade spare parts availability 6. Guaranteed start-up behavior: >98% guaranteed success rate

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: plin, Leto izdelave: 2024, Natural gas or biogas engines from manufacturer Liebherr are offered as an option. Type G9512 Standard Scope of Supply: - Starter - Cylinder heads - Exhaust manifolds and headers - Turbocharger Duedpfxetpw Ece Aflsl - Charge air cooler - Throttle valve (without actuator) - Without gas mixer - Without engine control and ignition system - Without charge air piping The engines are equipped with the following sensors: - Individual cylinder temperature monitoring - Engine oil temperature sensor - Engine oil pressure sensor - Speed sensor (2 x) - Ignition signal transmitter - Mixture temperature sensor - Mixture pressure sensor - Coolant temperature sensor - Coolant pressure sensor

Stanje: kot nova (razstavni stroj), For sale: Complete pistons for Scania OC13 gas engines. These are original OEM Scania components, removed from new engines. Included: - Piston - Piston pin - Locking rings - Piston ring set Dusdpfx Afeivzv Ioljl The piston sets are ready to use. Price per piece: €550.00 net, negotiable A total of 540 units are available. Europe-wide shipping available at buyer’s expense. Sale exclusively to commercial customers, with warranty and liability for material defects expressly excluded.

Stanje: dober (rabljeno), Servo motor, electric motor, DC motor, stepper motor - Manufacturer: Oriental Motor, Vexta servo motor stepper motor from Tiromat 3000/430 vacuum packaging machine - Type: PH268-E1.6-A1 Dedshwgdxspfx Afljul - Shaft: Ø 6 x 20 mm - Quantity: 3x stepper motors available - Price: per unit - Dimensions: 97/57/H57 mm - Weight: 0.2 kg/unit.

Stanje: rabljeno, moč: 338 kW (459,55 KM), prva registracija: 01/2012, vrsta goriva: dizel, gorivo: dizel, vrsta prenosa: mehanski, Leto izdelave: 2012, Interior: black Number of keys: 1 Dusdpfx Afox Rb Nuslel

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 36 kW (48,95 KM), skupna masa: 2.100 kg, vrsta goriva: dizel, barva: oranžna, Leto izdelave: 2014, obratovalne ure: 817 h, Oprema: pogon na vsa štiri kolesa, For sale: A540 DiXL V-2203 Spider – Professional Wood Chipper in Excellent Condition Operating hours: only 817 First registration: Government vehicle from Germany, out of service since 2022 Condition: Very well maintained, fully functional Maintenance: Serviced by an authorized specialist Last service at: 769 operating hours Feature: No exhaust aftertreatment system – ideal for easy operation and maintenance Technical Data: Model: A540 DiXL V-2203 Spider Duodpfoxq Sa Uex Afljl Drive engine: Kubota V-2203 (diesel) Power: 35.9 kW / 48.8 HP Engine type: 7 DF 5859 Max. feed opening (W x H): 210 x 190 mm Chipping length: Infinitely adjustable up to 20 mm Number of blades: 2 (plus 2 spare blades included) List price (new): €74,000 Chassis & Mobility: Crawler chassis with hydraulic adjustment Height adjustment: up to 300 mm Width adjustment: up to 420 mm Level adjustment for uneven terrain Diesel tank: 30 liters Highly off-road capable and flexible in use Summary: This A540 DiXL is the ideal machine for professional applications in forestry and landscaping. It impresses with its robustness, easy operation, low operating hours, and excellent technical condition. The last major service was performed at 769 operating hours – the machine is therefore ready for immediate use. No exhaust aftertreatment – particularly low-maintenance and simple to operate as a result. Viewing and test run available by appointment.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 11,8 kW (16,04 KM), vrsta goriva: dizel, poraba goriva na uro: 4 l/h, barva: oranžna, obratovalna teža: 1.600 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, Leto izdelave: 2025, obratovalne ure: 5 h, Oprema: gumene gosenice, kabina, klimatska naprava, nastavljivo podvozje, parkirni grelec, The SE18 mini excavator in the 1.6-ton class impresses with its robust design, modern hydraulics, and reliable Kubota diesel engine. This machine is ideal for civil engineering, landscaping, municipal use, and work on confined construction sites. Featuring an adjustable undercarriage, precise boom swing function, and a fully CE-certified safety cab (ROPS/TOPS), the SE18 offers maximum flexibility, safety, and operator comfort. The integrated air conditioning with heating, ergonomic controls, and the clear cab layout enable comfortable operation, even over long working hours. Thanks to the comprehensive bucket set, the excavator is ready for immediate use. Technical data & features: Engine: Kubota D902 – 3-cylinder diesel, 11.8 kW (efficient & durable) Operating weight: 1,600 kg Hydraulic pump: Branded pump Hydraulic valve: Northern Hydraulics – precise control Auxiliary hydraulics: 2 auxiliary circuits (e.g., for hammer, grapple, auger) Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Dozer blade: 1,100 mm Boom: Side swing left/right Pin diameter: 25 mm Full cab with ROPS/TOPS, CE-certified Front windshield can be opened Side sliding window Air conditioning with heating function Accessories & attachments – SET includes: ✔ 30 cm digging bucket (with teeth) ✔ 50 cm digging bucket ✔ 80 cm digging bucket ✔ Air, fuel, and oil filters ✔ Toolbox ✔ Mechanical quick coupler Special advantages: Proven Kubota engine – extremely reliable Hydraulic components from renowned manufacturers CE-compliant safety cab Ideal for confined construction sites thanks to adjustable undercarriage Dujdpfx Aox H Tirsflsl Complete bucket set included in the price Excellent price-performance ratio Service & Warranty: Maintenance every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts available from stock in Rheda-Wiedenbrück (DE) Delivery & availability: Short-term delivery possible (depending on stock) Fixed-date delivery guaranteed January 2026 Europe-wide delivery organized on request This machine meets the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €14,490 RRP Location: Rheda-Wiedenbrück

Stanje: rabljeno, Leto izdelave: 1999, Električni motor, letnik pribl. 1999 Dodpfx Aoxu Ewnjflsul

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 71500846002, moč: 132 kW (179,47 KM), Tehnični podatki po tipski tablici: Dedexgtpiopfx Afloul Proizvajalec: EMK / Sondermeier Elektromotoren Handels GmbH Tip: KHL1G315M-4B3E3KR Številka motorja: 71500846002 Moč: 132 kW Napetost: 400 V (trikotna vezava Δ) Tok: 241 A Frekvenca: 50 Hz Število vrtljajev: 1435 obr/min Gradnja: B3 (montaža na noge) Stopnja zaščite: IP55 Razred izolacije: F cos φ: 0,89 Datum izdelave: 08/2022 Kraj izdelave: Rain / Nemčija Nova cena: cca 6.200 € Naša cena: samo 2.800 €

Stanje: dober (rabljeno), Servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta stepping motor (stepper motor) -Type: C7219-9012K -Shaft: Ø 5 x 18 mm -Dimensions: 67/42/H42 mm -Weight: 0.3 kg Duedpfeq Dr Scox Aflsl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical details: SEW Motor Type: DV132H8/4BH/HF/TH Speed (r/min): 700/1450 IP Rating: IP54 Frequency: 50 Hz Voltage: 400V AC Brake: 400V Weight: 83.94 kg Dodpfxjwu Dbbe Afleul The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable performance, ensuring stable and efficient operation. The integrated rotary table allows for flexible and precise control of motion sequences, making it particularly suitable for applications in manufacturing and assembly.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schorch elektromotor 75 kW – 735 obr./min. Za neposreden pogon žage okvirja. Z ojačanimi ležaji. Z jermnico premera 400 mm. Dodoxvpqbspfx Afleul

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, vrsta prenosa: samodejen, število sedežev: 1, obratovalna teža: 2.000 kg, stanje verige: 100 odstotek, stanje pogona: 100 odstotek, prostornina žlice: 0,025 m³, Oprema: gumene gosenice, hidravlika, kabina, nastavljivo podvozje, parkirni grelec, The HT20 PRO is a compact and powerful mini excavator in the 2.0-ton class, designed for professional use in construction, landscaping, and municipal applications. The machine impresses with its robust construction, precise hydraulics, and high operational reliability. The proven Kubota D902 3-cylinder diesel engine with 11.8 kW ensures smooth operation, low fuel consumption, and a long service life. Thanks to its compact dimensions and adjustable undercarriage, the HT20 PRO is ideal for work on confined job sites. Technical Data: Engine: Kubota D902 3-cylinder diesel engine Engine output: 11.8 kW Low fuel consumption Very low vibration operation Hydraulics: Double-stage cast hydraulic pump Load-sensing hydraulic valve Travel motor with high/low speed Hydraulic hoses reinforced with steel mesh Work Equipment: Side-swinging excavator arm (left/right) Maximum digging depth: 1,995 mm Maximum reach: 3,130 mm Maximum digging height: 2,875 mm Maximum dump height: 1,930 mm Undercarriage: Adjustable track frame Reinforced undercarriage made of manganese steel Heavy-duty cast iron counterweights Three-ply rubber tracks with steel cord Track width: 200 mm Dimensions: Transport length: 2,650 mm Overall width: 970 – 1,270 mm (adjustable) Upper structure width: 1,055 mm Overall height with canopy (ROPS): 2,350 mm Track width: 770 – 1,070 mm Tail swing radius: 980 mm Minimum swing radius: 1,670 mm Gradeability: 30° Equipment: Fully enclosed cab Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick operation LED work lighting Comfort seat Reinforced steel construction Accessories / Attachments (available as a set): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Augers 150 / 200 / 300 mm + extensions) – SET PRICE €700 RRP Maintenance & Warranty: Maintenance intervals: every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts available from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: Short-term delivery possible (depending on stock) Fixed-date delivery January 2026 guaranteed Europe-wide delivery arranged on request This machine meets the highest safety standards and is CE-certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) Dedpfx Aex Hvvhjfloul 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €16,600 RRP Location: Rheda-Wiedenbrück

Stanje: rabljeno, Električni motorji Dodoxfvzropfx Afloul

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG hoist 635 H13 complete Load capacity: 10,000 kg, reeving 4/1 Good condition Dedpfx Asv T Tigofleul Delivery within Germany free of charge! Information: 20,000 DEMAG spare parts and components in stock! DEMAG parts warehouse

Stanje: dober (rabljeno), Servo motor, electric motor, DC motor, stepper motor, two-phase stepper motor - Manufacturer: isert-electronic: Two-phase stepper motor 1.8° - Gearbox: 3465 A2411-9212-A2 Dedpoq Adpisfx Afleul - Motor: Oriental Motor Type 2GK9K - Shaft: Ø 8 x 27 mm - Quantity: 6 stepper motors available - Price: per piece - Dimensions: 135/60/H60 mm - Weight: 0.9 kg/each

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: oranžna, obratovalna teža: 2.500 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,07 m³, Leto izdelave: 2025, obratovalne ure: 5 h, Oprema: hidravlika, hitroizmenjevalna naprava, jeklene gosenice, kabina, klimatska naprava, parkirni grelec, The HT25PRO is a powerful 2.5-ton class premium mini excavator designed for professional and demanding applications. As a larger and more robust version of the HT20, it offers increased performance, reach, stability, and productivity. Equipped with an original Kubota diesel engine, load-sensing hydraulics, and a reinforced manganese steel structure, the HT25PRO is ideally suited for civil engineering, landscaping, municipal operations, and agricultural businesses. Technical specifications: Engine: Kubota D1105 3-cylinder diesel engine Output: 14 kW rated power (continuous operation), up to 18.4 kW peak power (no selectable power modes) Very low vibrations Fuel-efficient Designed for continuous duty Hydraulics: Load-sensing hydraulic pump Load-sensing multi-way hydraulic valve Hydraulic pump pressure: 25 MPa System pressure: 22 MPa Hydraulic flow rate: 61.6 l/min Travel motor with high/low speed (Japan Standard) High-quality, heavy-duty hydraulic hoses Dimensions & weight: Length × width × height: 345 × 143 × 250 cm Djdpfx Aex Hhu Njfleul Chassis width: 140 cm Operating weight: 2,500 kg Working area: Swing boom left/right Rotation function Maximum digging depth: 2370 mm Dig/release height: 3500 mm Undercarriage & superstructure: Manganese steel undercarriage with high torsional strength Extendable / telescopic lower frame Laser-cut, high-precision steel components Solid cast iron counterweight Equipment: Steel tracks (very robust, professional use) Fully enclosed cabin Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick control LED work lighting Comfort seat Reinforced steel construction Accessories / attachments (available as a set): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Bits 150 / 200 / 300 mm + extensions) – SET PRICE €850 RRP Maintenance & warranty: Inspection every 250 operating hours or annually Warranty: 12 months across Europe Service & spare parts ex-stock Rheda-Wiedenbrück (DE) Delivery & availability: Short-term delivery possible (depending on stock availability) Guaranteed fixed delivery date January 2026 Europe-wide delivery arranged upon request This machine complies with the highest safety standards and is CE-certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €23,500 RRP Location: Rheda-Wiedenbrück

Stanje: dober (rabljeno), Servomotor, electric motor, DC motor, stepper motor, stepping motor Dedpfx Afsff Aqzoljul - The motor is from a Weisser Heilbronn Type 29 CNC lathe - Speed: 2000 rpm - Power: kW - Mounting type: B5 - Shaft diameter: Ø 30 mm - Quantity: 1 piece available - Dimensions: - Weight: 20 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.320 kg, vzmetenje: drugo, barva: oranžna, Leto izdelave: 2025, obratovalne ure: 5 h, moč: 14,6 kW (19,85 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, poraba goriva na uro: 2 l/h, število sedežev: 1, obratovalna teža: 2.200 kg, dvižna višina: 4.190 mm, stanje verige: 100 odstotek, stanje pogona: 100 odstotek, prostornina žlice: 0,068 m³, kapaciteta rezervoarja za gorivo: 20 l, Oprema: gumene gosenice, hidravlika, kabina, nastavljivo podvozje, parkirni grelec, The LT-25P is a compact and powerful 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust construction and modern load-sensing hydraulics deliver efficient, precise performance even under demanding conditions. Thanks to its swing boom, the machine is ideal for working in confined spaces, as well as for standard excavation and foundation work. Key Technical Features: - Swing boom for precise operation in tight areas - Stable undercarriage (1,300 / 1,500 mm) for maximum stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-performance axial piston pump - Hydraulic piston travel and swing motors - High digging and breakout forces - Wear-resistant rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cab: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Upper carriage ground clearance: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 hp at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Travel & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Slew speed: 9.5 rpm - Max. gradeability: 30° - Max. tractive force: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm Dedpfx Asx Hg Etjflsul - Max. dumping height: 4,190 mm - Max. dumping clearance: 2,880 mm - Min. swing radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. dig depth: 300 mm Undercarriage: - Track material: Rubber - Track type: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Working pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Features: - Swing boom - Fully enclosed cab with heater - Dozer blade - Joystick controls - LED work lights - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel structure Attachments & Implements – Included Set: - 25 cm trenching bucket - 50 cm trenching bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – 1,400€ MSRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – set price 650€ MSRP Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts available from stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Short-term delivery possible (depending on stock) - Guaranteed fixed delivery date: January 2026 - Europe-wide delivery organized upon request This machine complies with the highest safety standards and is CE-certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET (excl. VAT): 22,000€ MSRP Location: Rheda-Wiedenbrück