Pivo nakup rabljenega (1.099)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas
Egenhofen
373 km
Izvlečna žaga
GrauleZS170NF
Klic
Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm
Cutting length: 430 mm
Mitre range horizontal: 45°-90°-25°
Mitre range vertical: 60° - 90° - 30°
Swivel adjustment with hand crank: yes
Roller conveyor / support table: yes
Saw blade diameter: 420 mm
Speed: 2800 rpm
Motor power: 3 kW
Motor brake: yes
Extraction port: 100 mm
Roller conveyor length: 2 x 1500 mm
Machine length: 4000 mm
Machine width: 1250 mm
Hedpjizkhvefx Ab Sow
Machine height: 1550 mm
Weight:
mali oglas
Crailsheim
497 km
Dizelski viličarji
StillRC 42-40
Klic
Stanje: rabljeno, Leto izdelave: 2021, nosilnost: 4.000 kg, dvižna višina: 4.000 mm, skupna dolžina: 4.400 mm, - Travel speed with/without load: 24 km/h
- Plastic cabin roof, heater
- Number of valves: 3
- Rated capacity/rated load: 5,000 kg
- Load center distance: 500 mm
- Load distance: 567 mm
Hedpfx Asxtf N Iob Sew
- Axle load, loaded: 10,780/1,360 kg
- Axle load, unloaded: 3,300/4,060 kg
- Track width: 1,180 mm
- Track width: 1,190 mm
- Mast/Carriage tilt (α/β degrees): 6/12
- Seat height rel. to SIP/stand height: 1,315 mm
- Coupling height: 380 mm
- Aisle width for pallets 1000 x 1200 (crosswise): 4,597 mm
- Aisle width for pallets 800 x 1200 (lengthwise): 4,797 mm
- Turning radius: 2,830 mm
- Minimum pivot point distance: 900 mm
- Travel speed loaded/unloaded: 22/24 km/h
- Lifting speed loaded/unloaded: 0.45/0.49 m/s
- Lowering speed loaded/unloaded: 0.38/0.26 m/s
- Drawbar pull loaded/unloaded: 28/21 kN
- Gradeability loaded/unloaded: 20%/20%
- Service brake: mechanical/hydraulic
- Rated speed: 2,200 l/min
- Number of cylinders: 4
- Displacement: 2,482 cm³
- Emission standard according to EU Regulation 2016/1628 Stage III a
- Onboard voltage: 12 V
- Drive type: torque converter
- Operating pressure for attachments: 200 bar
- Oil flow for attachments: 101 L/min
- Fuel tank capacity: 90 L
- Tow coupling: DIN 15170 pin type
mali oglas
Nattheim
457 km
Repatriacija
BarbaricRTS Compact
Klic
Leto izdelave: 2024, Stanje: rabljeno, Exhibition machine Return SystemReturn system for edge banding machineMax. part sizes: 2800 x 1300 mmMax. part size with 4-sided edge banding: 1300 x 1300 mm (optionally 2400 x 800 mm)Continuously adjustable feed from 7 – 20 m/min (optional 30 m/min)Adoption of the feed speed of the edge banding machine possible (0 - 10 V)Drives electrically controlled via frequency inverter and geared motorLifting function pneumatically operatedWorkpiece detection via sensorsControl unit with 3.2" displayHeight adjustable from 800 - 1000 mmMaximum weight: 60 kgPaint finish: RAL 7035Conveyor beltConveyor belt for panel return transportReturn conveyor speed: 7-30 m/minConveyor belt width: 800 mm Roller conveyorSlightly inclined adjustable roller conveyor with plastic rollers and stop for mounting after the blower as an outfeed station for returned panels; roller track width: 800 mm Variant 3 for left-running edge banding machine, incl. packagingA… Length of edge banding machine 4800 mm – 5300 mmB… Length of return conveyor 3000 mmC… Length of roller track 2500 mm Roller track extensionSingle-lane extension for RTS Compact conveyor unit; consists of an additional freestanding roller track as well as roller conveyor and lifting unit to support large parts. Via adjustable pivot points, panels are rotated after transfer and fed nearly straight back onto the return conveyor. Upper pressure pneumatically controlledPart lengths: 300 - 2400 mmPart widths: 200 - 800 mmPanel thickness: 8 - 35 mm (panels must be self-supporting)These part sizes are a recommendation from Barbaric. Parts deviating in these dimensions may not function correctly and could cause problems. Increasing the panel length during end edge banding can lead to a risk of crushing at machine parts as well as on-site objects or hall columns. Ergonomics package RTS Compact Ergonomics package RTS Compact, consisting of lifting table and table dimensions:Lifting table: 1960 x 960 mmTable dimensions: 960 x 760 mmSteel construction with integrated air cushion table and blower nozzles for easy handling; table height adjustable pneumatically.Location: Garbsen
Hodpfx Abow Sy Tmj Ssw

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Výčapy
340 km
Tandemski valj
StechTB21
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 21,3 kW (28,96 KM), vrsta prenosa: hidrostat, skupna masa: 2.300 kg, Leto izdelave: 2007, obratovalne ure: 1.792 h, Prodajam zgibni valjar Steck TB21. Valjar je popolnoma delujoč in pripravljen na uporabo. Na voljo je originalna tehnična dokumentacija TP.
Delovna širina 1030 mm, hidrostatični pogon, možnost izklopa zadnjega valja, 185-litrski rezervoar za škropivo, takoj na voljo.
Tehnični podatki:
Leto izdelave: 2008
Delovne ure: 1.792
Teža: 2.300 kg
Motor: Deutz 21,3 kW
Transportne mere:
Hsdpfx Aoxrvmusb Sjw
Dolžina: 2,385 m
Širina: 1,11 m
Višina: 2,59 m
Teža: 2,3 t
Po dogovoru je možen prevoz do namembnega kraja.
mali oglas
Moosburg an der Isar
341 km
Industrijska prikolica 6t, opcijsko z nadgradnjo strehe
Multi-TransVAL 30
Klic
Stanje: zelo dobro (rabljeno), skupna dolžina: 4.100 mm, skupna širina: 2.100 mm, skupna višina: 560 mm, barva: modra, ALSO AVAILABLE OPTIONALLY WITH ROOF STRUCTURE!
Operating Conditions:
The trailer is designed for use on flat, paved surfaces in in-plant transport.
Payload:
6 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are only permissible upon prior notification.
Base Frame:
Robust welded construction made from sectional steel profiles.
Loading Platform:
Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, with phenolic resin-coated plywood panels
Anti-collision bumpers on the front frame ends
Steering:
Four-wheel knuckle steering, towing drawbar can be raised, non-reversible and non-removable,
Drawbar drop lock in accordance with accident prevention regulations (UVV)
Chassis:
Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with
conical roller bearings and permanent grease lubrication
Paint Finish:
Top coat RAL 5002 Ultramarine Blue
Other Features:
- Impact protection on the front frame ends made from drop-shaped half-shells.
- All-round anti-slip edge approx. 25 mm high
- Side underrun protection at the height of the diagonal brace
- Pin coupling with captive, spring-secured bolts (diameter 30 mm) at the rear
- Double-acting wheel chock with chain
Hedpfoxrtgfsx Ab Sjw
- Two reflectors at the rear
- Prepared for roof structure
mali oglas
Mindelheim
400 km
Dvojno poševna tračna žaga za kovino
MIOTAL®S 235 DG
Klic
Stanje: novo, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. for industrial applications.
Technical data:
Cutting capacity:
Round 0°: 235 mm
Square 0°: 200 x 200 mm
Flat 0°: 280 x 190 mm
Round 45° right: 190 mm
Square 45° right: 170 x 170 mm
Flat 45° right: 190 x 180 mm
Round 60°: 120 mm
Square 60°: 120 x 120 mm
Flat 60°: 120 x 115 mm
Round 45° left: 175 mm
Square 45° left: 145 x 145 mm
Cutting speed, stepless: 20 - 90 m/min
Saw blade: 2645 x 27 x 0.9 mm
Working height, approx.: 990 mm
Coolant pump: 100 W
Saw motor: 1.5 kW
Connection: 230 V
Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm
Weight, approx.: 295 kg
Features:
- Double miter bandsaw with swiveling saw bow from left -45° to right +60°
- Large cast iron saw arm for low-vibration operation
- Stepless adjustable cutting speed for optimal adaptation to the workpiece
- Hydraulic lowering cylinder, infinitely adjustable
- Quick-release vise for fast and simple workpiece clamping
- Precise, adjustable saw blade guide for optimum cutting results
- CE/IEC compliant, German documentation and service
Scope of delivery:
- Bimetal saw blade
- Blade tension adjustable via manometer
Hsdpfx Abjqbr Suo Sew
- Carbide blade guides
- Quick-release vise
- Material stop
- Coolant system incl. pump
- Hydraulic lowering cylinder
- Motor protection switch
- Automatic cut-off at end of cut
- Base frame
mali oglas
Egenhofen
373 km
Izvlečna žaga
GrauleZS170N
Klic
Stanje: rabljeno, Leto izdelave: 2025, Cutting height at 90°: 170 mm
Cutting length: 430 mm
Mitre range horizontal: 45°-90°-25°
Mitre range vertical: 60°-90°-30°
Swivel adjustment with hand crank: yes
Roller conveyor / support table: no
Saw blade diameter: 420 mm
Speed: 2800 rpm
Motor power: 3 kW
Motor brake: yes
Extraction connection: 100 mm
Machine length:
Hedeiixxnspfx Ab Ssw
Machine width:
Weight: 110 kg
mali oglas
Söding
97 km
Kombinirani skobeljnik in skobeljnik za debelino
HAMMERA3 41
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, For sale: A used Hammer A3-41 jointer-thickness planer with a planing length of 1,800 mm. The machine has been inspected by our technical staff and is in like-new condition.
Technical specifications:
- Planing/thicknessing width: 410 mm
- 3-knife cutterhead (system reversible knives)
- Dual folding jointer tables
Hodpfxsv Scx Uj Ab Sow
- Adjustable planer fence 90-45°
- Thicknessing height: 4–225 mm
- 5.5 HP (4 kW) motor / 400 volts
- Year of construction: 2024
- Machine No.: 52.02.285.24
The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale!
Related terms: jointer, thicknesser, planer, planing, thicknessing
Reference: R-L0J2U
mali oglas
Nattheim
457 km
Stroj za robne trakove
SCMOlimpic K 800
Klic
Stanje: rabljeno, Leto izdelave: 2012, Base machine Olimpic K 800 "T-ERL" (47) 1 pc
BASIC EQUIPMENT:
- Ribbed steel machine base with tube reinforcements for optimal support of working units
- Swiveling control panel
- Support roller track with ball-bushing guidance along the entire machine length
- Protective and noise-reducing cover with separate doors between the gluing and finishing units
- Extraction nozzles mounted on the noise-reduction cover
- Electrical system with lockable main switch
Hedpfx Abjxq Apge Sow
- Emergency stop buttons at infeed and outfeed
- Inverter for electric spindles
PANEL FEED SYSTEM:
- Feed chain with rubber sliding shoes, featuring a high coefficient of friction, mounted on a 1 ¼” industrial chain
- The chain runs on two guides made from hardened and ground steel, one round and one flat, to ensure straight-line feeding and prevent lateral displacement
- Automatic central lubrication of the feed chain
- The upper pressure beam is made of thick-walled steel construction, complete with double rows of ball-bearing mounted rollers and protective device for the pressure rollers
- Manual lifting of the pressure system with automatic positioning of the working units upon change of panel thickness
- Mechanical digital indicator for monitoring the selected panel thickness
CONTROL "ORION 100":
Control unit complete with PLC, allowing fast, simple, and error-free execution of customized machining programs (max. 60 programs).
Manages pneumatic positioning of units if available on the machine. (The control system does not include pneumatic positioners.)
- Alphanumeric keypad and display
- Function keys for quick actuation of working units
- Ambient temperature range: 0 to +45°C
MAIN FUNCTIONS:
- Control of working units and automatic activation of motors
- Monitoring and regulation of glue pot temperature
- Selection for longitudinal and transverse processing without program change
- Simple, guided diagnostics for easy troubleshooting
- Statistics for absolute data and individual operations: quantity, edge band usage, total chain feed distance
- Unit selectable in mm or inches
Technical Data OLIMPIC K800 T-ER L:
Edge thickness: 0.4 to 8 mm
Max. edge band thickness (roll): 3 mm
Feed speed: 12/18 m/min
Working height: 8 to 60 mm
Max. edge section dimensions: 135 mm²
Turntable diameter: 780 mm
Max. overhang compared to panel thickness: 4 (2+2) mm
Min. panel width (with 210 mm min. length): 55 mm
Min. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mm
Min. distance between consecutive panels at m/min 11 (16): 750 (850)
Standard Equipment:
- Pre-milling unit at infeed RT-E
- Gluing station VC-800
- End trimming unit KSEL
- Flush trimming unit, tiltable RI/800
- Corner rounding unit ROUND K
- Scraper unit RAS-V
- ½ free space for surface scraper
- 1 S free space for surface scraper, universal cutter, or buffing unit
- 1 F free space for air nozzle unit
Complies with European safety regulations (C.E. mark)
1 pc Voltage 400 V EU
1 pc Frequency 50 Hz
1 pc "Autoset" for models ER2, T-ERS and T-ERL
Enables all necessary adjustments for each processing change from the control panel. Includes:
- Timed pressure unit
- Pneumatic and independent swiveling of end saw blades (front/back)
- Pneumatic remote adjustment for the flush trimming unit RI/800
mali oglas
Moosburg an der Isar
341 km
Industrijska prikolica VAL30 – 25 t nosilnosti
Multi-TransVAL30
Klic
Stanje: zelo dobro (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 750 mm, barva: modra, Operating conditions:
The industrial trailer is designed for use on level, paved surfaces in in-plant transport.
Towing combinations:
The trailer components are not (without a tow hitch) designed for combined use with multiple trailers.
Payload:
The industrial trailer is capable of transporting loads up to a maximum of 25 t at 6 km/h, assuming a uniform loading (surface load) of the platform between the axles. Point or linear loads are only permitted upon notification.
Main frame:
The main frame of the industrial trailer is a robust welded construction made of structural steel sections.
Loading platform:
Dimensions are approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The platform is covered with softwood planks and enclosed by a continuous edge protection.
Steering:
Four-wheel kingpin steering, drawbar can be raised, removed, and switched from front to rear; hitch height on towing vehicle approx. 285 – 775 mm (other hitch heights only permitted upon notification); towing eye according to DIN 74054, Ø 40 mm; drawbar fall protection according to accident prevention regulations (UVV)
Chassis:
Both axles are steered. Solid rubber tires approx. 559 x 356 mm; wheel hubs with tapered roller bearings and lifetime grease lubrication
Paintwork:
Finished in RAL 5002 Ultramarine Blue
Additional equipment:
On each longitudinal side, two lashing bars made of round steel are welded vertically into the outer beams.
Available for rent or sale EU-wide.
Hjdpsxrtb Nsfx Ab Sow
mali oglas
Mindelheim
400 km
Horizontalna tračna žaga
MIOTAL®S 355 DG
Klic
Stanje: novo, Robust double-mitre metal bandsaw for professional use in metal fabrication and container construction, featuring hydraulic lowering of the saw bow.
Cutting capacity:
Round 0°: 355 mm
Square 0°: 300 x 300 mm
Flat 0°: 490 x 300 mm
Round 45°: 350 mm
Square 45°: 290 x 290 mm
Flat 45°: 340 x 290 mm
Round 60°: 230 mm
Hsdpfjw Hxckox Ab Sow
Square 60°: 180 x 180 mm
Flat 60°: 220 x 180 mm
Cutting speed: 35 / 70 m/min
Saw blade: 3770 x 34 x 1.1 mm
Working height approx.: 870 mm
Coolant pump: 100 W
Saw motor: 1.9 kW
Electrical connection: 400 V
Dimensions LxWxH approx.: 2200 x 1400 x 1500 mm
Weight approx.: 625 kg
Features:
- Double-mitre saw with swivelling saw bow from left -45° to right +60°
- Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc., in industrial applications
- Generously dimensioned cast saw arm for low-vibration operation
- Equipped with 2 blade speeds for optimal adjustment to the workpiece
- Hydraulic lowering cylinder
- Automatic vice opening at end of cut
- Quick-release vice for easy and fast clamping of workpieces
- Precision, adjustable blade guides for optimal cutting results
- CE/IEC compliant, German documentation and German service
Scope of delivery:
- Bi-metal saw blade 3770 x 34 x 1.1 mm
- Blade tension adjustable via manometer
- Carbide blade guides
- Quick-release vice
- Material stop
- Coolant system with pump
- Hydraulic lowering cylinder
- Motor protection switch
- Automatic shut-off at end of cut
- Base frame
mali oglas
Egenhofen
373 km
Rezkar
RoblandT120 TL
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Spindle tiltable: No
Height adjustment: Handwheel
Hodpfxjgzlpkj Ab Sjw
Tilting adjustment: -
Milling jaw adjustment: manual
Height display: mechanical counter
Tilt angle display: -
Milling fence display: mechanical counter
Milling spindle diameter: 30 mm
Speeds: 3000, 4500, 6000, 7000, 10000
Motor power: 7 kW
Motor brake: Yes, automatic
Extraction connection: 2 x 120mm
Machine length: 2599mm
Machine depth: 900mm
Weight: 655kg
mali oglas
Nattheim
457 km
CNC obdelovalni center
SCMStartech CN
Klic
Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications.
Hedevwbp Aspfx Ab Sow
mali oglas
Moosburg an der Isar
341 km
Industrijska prikolica PA65-2 – nosilnost 60 t
Multi-TransPA65-2
Klic
Stanje: skoraj kot novo (rabljeno), skupna dolžina: 10.000 mm, skupna širina: 3.000 mm, skupna višina: 1.105 mm, barva: modra, Operating conditions:
The heavy-duty trailer is designed for use on level, paved surfaces within in-house transport operations.
Multiple trailer operation:
The trailer components are not intended (without a trailer coupling) for multi-trailer operation.
Payload:
60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permitted upon notification.
Main frame:
Robust welded construction made from profile steel sections
Loading platform:
Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, platform decked with softwood planks, all-round recessed edge protection
Steering:
Hedpfxoxrr Uhj Ab Sjw
All-wheel steering on 4 pendulum axles; drawbar can be raised, removed, and swapped from front to rear; hitch height on towing vehicle approx. 650 mm (alternative heights permitted only upon notification); towing eye according to DIN 74054, diameter 40 mm; track rods with adjustable ball joint heads, diagonal or towing rods adjustable and fitted with low-maintenance joint bearings; drawbar safety lock according to UVV.
Chassis:
4 steered pendulum axles, 2 steered axle lines to ensure even load distribution on the wheels; wheels with solid rubber cushion tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and lifetime lubrication.
Paintwork:
Finish coat RAL 5002 ultramarine blue
For rent or sale EU-wide.
mali oglas
Nattheim
457 km
Stoječa žaga za plošče
Putsch-MeniconiSVP 950 M ECO
Klic
Stanje: rabljeno, Leto izdelave: 1995, maks. širina reza: 5300 mm
maks. višina reza: 2200 mm
premer žaginega lista: 300 mm
maks. debelina obdelave: 80 mm
luknja žaginega lista: 30 mm
materialna podlaga: plastične letve
merilni sistem: skala
nagib žagine glave: ročno
Hjdpsvvkqyjfx Ab Sjw
podajanje žage: ročno
odsesavanje: zunanja odsesavalna naprava
zaklepanje žaginega mostu: ročno
teža pribl.: 1500 kg
dimenzije: 6300 x 1500 x 2900 mm
moč motorja: 4,4 kW
Skladišče: Nattheim
mali oglas
Nattheim
457 km
Stoječa žaga za plošče
Putsch-MeniconiSVP 950 M ECO
Klic
Stanje: rabljeno, Leto izdelave: 1996, maks. širina reza: 5300 mm
maks. višina reza: 2200 mm
premer žaginega lista: 300 mm
maks. debelina obdelave: 80 mm
luknja žaginega lista: 30 mm
materialna podlaga: plastične letve
merilni sistem: skala
Hedpfjvvkq Hjx Ab Sew
nagib žagine glave: ročno
podajanje žage: ročno
odsesavanje: zunanja odsesavalna naprava
zaklepanje žaginega mostu: ročno
teža pribl.: 1500 kg
dimenzije: 6300 x 1500 x 2900 mm
moč motorja: 4,4 kW
Skladišče: Nattheim
mali oglas
Nattheim
457 km
Stroj za lepljenje robov s spajanjem
Holz-HerContriga 1366
Klic
Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366
Edge thickness: 0.4–30 mm (depending on equipment)
Edge height: 51/66 mm (depending on equipment)
Panel thickness: 6–45/60 mm (depending on equipment)
Edge types: Coil and strip material
Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment)
Features:
- Adjustable infeed table in magazine area (max. adjustment range 30 mm)
- Height-adjustable magazine plate for lower edge overhang adjustment
- Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm
- Transport chain including automatic central lubrication
- Motorized, position-controlled bridge height adjustment
- Pneumatic locking roller for processing shortest workpiece intervals
- Extendable workpiece support (extension up to 1600 mm)
- Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units)
- Motorized infeed fence
- Lubrication injector for all joints and pins (including hour counter)
- Central extraction connection (2x Ø 200 mm)
- Integrated chip collection box at machine end (in conjunction with radius scraper unit)
Control PPC 231 - Power PC for efficient setup and changeover
- 15" SVGA touchscreen display
- CF memory card 128 MB
- On-board USB port
- Ethernet network interface
- On-board keyboard connector
- Windows-like user interface
- Plain text and/or graphic information
Hedpfsvvkfdsx Ab Sew
- Rotatable, tiltable control panel at eye level
- Dust-proof membrane keypad with softkeys (push buttons)
- LED indicator for unit preselection
- Program list with program names and numbers
- Comprehensive program memory
- Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points
- Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment)
- Interval display for shortest workpiece distance
- Integrated distance control; positions controlled globally and/or program-specific
- Comprehensive and complete operating data acquisition
- Service messages in plain text
- Diagnostic system
- Integrated synchro-bus system for high-precision unit control
- Individual management for up to ten users including password protection
- Online maintenance (optional), data exchange with HOLZ-HER service
- Barcode interface (optional)
BASE MACHINE CONTRIGA 1366 - belt bridge
Options and accessories for the base machine:
Spray unit 1856 for entry and exit section:
For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent
For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964)
Jointing cutter unit
Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm)
With two electronically controlled cutter units
- 1 unit counter-rotation
- 1 unit co-rotation
- 5 mm plunge depth
- Static frequency inverter 200 Hz
- Without router tool
- With ProLock quick-change tool holder
Tooling for 1803 (workpiece height up to 60 mm)
Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand
Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system)
Max. chip removal: 2 mm at 60 mm workpiece height
[Text continues]
If you need the rest of the translation or a tailored summary, please let me know.
mali oglas
Nattheim
457 km
Platten-Schwenk-Fix
Rehnen MachinenbauPSF-250
Klic
Leto izdelave: 2022, Stanje: rabljeno, Plattenschwenkfix olajša rokovanje pri prenašanju plošč iz navpičnega v vodoravni položaj. Nosilni okvir je hidravlično nastavljiv po višini in dodatno vrtljiv. Nosilni valjčki olajšajo premik v vodoravnem položaju. Štiri vrtljiva kolesca zagotavljajo varno premikanje.
Tehnični podatki:
Višina polaganja:
• v stoječem položaju cca 340–1.200 mm
• v ležečem položaju cca 1.200–890 mm
Hedev T Ilvepfx Ab Ssw
Maks. velikost plošče: 5.200 x 2.100 mm
Nosilnost: 250 kg
Lokacija skladišča: Bad Wimpfen
mali oglas
Nattheim
457 km
Stoječa žaga za plošče
StriebigAutomat II Plus 6220 AV
Klic
Stanje: rabljeno, Leto izdelave: 1992, maks. širina reza: 5300 mm, maks. višina reza: 2200 mm, premer žaginega lista: 300 mm, maks. debelina obdelave: 80 mm, odprtina žaginega lista: 30 mm, spodnja podpora: togi valji, nagib žagine glave: ročno, podajanje žage: avtomatsko, odsesavanje: zunanje odsesavanje, teža cca.: 1500 kg, moč motorja: 5,5 kW
Lokacija skladišča: Nattheim
Hsdpfx Abjvvkq Te Sow
mali oglas
Nattheim
457 km
CNC obdelovalni center
HolzHer7120
Klic
Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim
Hjdpfxjvvi Nbj Ab Ssw
mali oglas
Nattheim
457 km
Stoječa žaga za plošče
StriebigStandard II Plus 6220 A
Klic
Stanje: rabljeno, Leto izdelave: 1991, maks. širina reza: 5300 mm, maks. višina reza: 2200 mm, premer žaginega lista: 300 mm, maks. debelina obdelave: 80 mm, luknja žaginega lista: 30 mm, merilni sistem: skala, nagib žagine glave: ročno, podajanje žage: ročno, odsesavanje: zunanja odsesava, zaklepanje žaginega nosilca: ročno, teža cca: 1200 kg, dimenzije: 6300 x 1200 x 2900 mm, moč motorja: 5,5 kW. Lokacija skladišča: Nattheim.
Hedpfsvvkthsx Ab Sew
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Nattheim
457 km
Drsna namizna žaga
SCMSI 450 E
Klic
Stanje: rabljeno, Leto izdelave: 2004, Žagin agregat: nagibni do 45° Dolžina vozička: 3200 mm Maks. premer žaginega lista: 450 mm Luknja žaginega lista: 30 mm Moč motorja: 7,5 kW Maks. širina reza: mm Upravljalna plošča: na višini oči Nastavitev višine: vnos prek tipkovnice Nastavitev naklona: vnos prek tipkovnice Prikaz kota nagiba: digitalno Prikaz širine reza: digitalno Podaljšek mize – dolžina: da Krajšanje na prečnem prislonu: 3200 mm Prikaz prečnega prislona: skala Nastavitev predrezovalnika: električno Predrezovalni list: PSV Zaščitni pokrov: da Zaklep v končnem položaju: da Avtomatska motorna zavora: da Hitrosti: 2500/3500/5000 o/min Opis: Višina reza pri žagam listu 450 mm, 150 mm Teža cca: 1180 kg Dimenzije: 3200 x 1800 x 1800 mm Premer odsesavnih priključkov: 1 x 80, 1 x 120 mm Lokacija skladišča: Nattheim
Hsdpfxewayx Te Ab Sjw
mali oglas
Nattheim
457 km
Stoječa žaga za plošče
StriebigStandard II TRK 5220 A
Klic
Stanje: rabljeno, Leto izdelave: 2001, maks. širina reza: 4300 mm
maks. višina reza: 2200 mm
premer žaginega lista: 300 mm
maks. obdelovalna debelina: 80 mm
luknja žaginega lista: 30 mm
merilni sistem: lestvica
nagib glave žage: ročno
pomik žage: ročno
odsesovanje: zunanje odsesovanje
zaklepanje žaginega nosilca: ročno
teža pribl.: 1200 kg
dimenzije: 5300 x 1200 x 2900 mm
moč motorja: 5,5 kW
Lokacija skladišča: Nattheim
Hedpfx Abswkai Hs Sew
mali oglas
Nattheim
457 km
Stoječa žaga za plošče
StriebigStandard II TRK 5220A
Klic
Stanje: rabljeno, Leto izdelave: 1999, maks. širina reza: 4300 mm
maks. višina reza: 2200 mm
diamater žaginega lista: 300 mm
maks. debelina obdelave: 80 mm
luknja žaginega lista: 30 mm
merilni sistem: lestvica
nagib žagine glave: ročno
pomik žage: ročno
odsesovanje: zunanje odsesavanje
Hodpfswa Dqgex Ab Sjw
zaklepanje žaginega nosilca: ročno
teža pribl.: 1200 kg
dimenzije: 5300 x 1200 x 2900 mm
moč motorja: 5,5 kW
Skladišče: Nattheim
mali oglas
Nattheim
457 km
Stroj za lepljenje robov s spajanjem
StefaniSolution XD
Klic
Stanje: rabljeno, Leto izdelave: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD
MAIN FEATURES
"E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: OPERATE THE MACHINE WITH JUST ONE "TOUCH"
STANDARD PRESSURE UNIT WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE
EDGE BANDING OF ROLL MATERIAL, STRIP EDGES, AND SOLID WOOD EDGES
GENERAL FEATURES
Single-sided edge banding machine in left-hand configuration for processing roll material and strip edges using all conventional hot-melt adhesives. The base frame consists of a robust welded steel stand with increased rigidity, providing optimal support for the processing units.
The top pressure ensures a stable hold with a thick-walled steel profile and dual trapezoidal drive belt, which is automatically positioned according to panel thickness. Height adjustment with indicator at the top pressure and on the operator surface.
Manual workpiece infeed system with large-scale work line and enlarged support area facilitates the insertion of large workpieces.
Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling.
Working units attached to the pressure beam and mechanically linked to ensure automatic setting when changing panel thickness. Lower working units attached to the machine frame or longitudinal beam for precise reference to the panel.
All high-frequency motors are equipped with frequency inverters for optimal flexibility and improved production times; each unit is equipped with its own inverter.
Extraction hood for all units positioned after the gluing station. Polycarbonate viewing windows provide a clear view of the units during processing. Interior lighting with sound-absorbing material for reduced noise emissions.
Spacer at the infeed fence allows material to be fed into the machine at the correct distance. The distance adjusts automatically to the selected feed speed.
Swiveling control panel, positioned at the infeed, is adjustable for ergonomic operation.
The electrical system complies with current regulations. Electrical components are housed in a metal enclosure mounted on the machine frame, equipped with doors for convenient access during maintenance.
Standard voltage is 400 V EU 50 Hz (with neutral conductor).
Hjdpfx Abow Aim Ee Sow
Material feed is via a feed chain with 80 mm wide rubberized nylon chain plates for optimal guidance and high precision. The chain runs on two guides made of hardened and ground steel – one round and one flat – to ensure straight feeding and prevent lateral displacement. Automatic lubrication of the chain; the control system adjusts the amount of oil according to the number of processed panels.
External roller conveyor positioned along the entire machine length; equipped with a retractable system extendable up to 650 mm (for panels up to 1200 mm maximum width).
E-TOUCH PC control system enables fast and easy execution of main functions, including:
– Processing of programs in "Just in Time" mode
– Possibility of management via parts lists
– Management options through ...
Olajšamo vam iskanje: "pivo"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Pivo (1.099)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec

























































































































































