Pečica Na Vroči Zrak nakup rabljenega (140.029)

Stanje: novo, Leto izdelave: 2024, Combustion chamber output: 175 kW Working output: 140 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 250 mm Combustion chamber length: 950 mm Combustion chamber width: 600 mm Combustion chamber height: 860 mm Air delivery: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Oven height without air distribution ducts: 2,200 mm Oven width: 930 mm Oven length without flue gas fan: 1,700 mm Fpsdpfx Ahok Utrps Den Weight: 615 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces represent an ideal solution for energy utilization in woodworking industrial and craft enterprises. They are designed for heating larger usable areas, such as workshops and production halls in craft and industrial operations. These hot air systems require no long heat-up phases and can quickly heat the workshop, joinery, or other production areas. Fuel used includes solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Emission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room: approx. 1,600 m³ Fjdsvz Hq Tjpfx Ah Djpn - Heatable area: approx. 300 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical details, please refer to the attached datasheet The two pipe connectors for outgoing hot air are located at the rear lower section of the furnace. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Stanje: novo, Heating capacity: 30 kW Dimensions (L/W/H): 105 cm x 60 cm x 147 cm - NEW - Fsdpfxevxa Ito Ah Dspn Kanuk Turbo 2 *new design* Hot air furnace incl. heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1,000 m³ Log length: 80 cm Efficiency: 82.4 % Flue pipe connection: 150 mm Ref. No.: 2100006

Stanje: rabljeno, Type FLC 14000/600 FlowCook completely made of stainless steel suitable for thermal oil heating (300 kW) belt length approx. 13,000 mm belt width approx. 600 mm Fedpfx Ajwhv Dneh Depn discharge belt belt washing system electric lifting device for the hood steam pressure: 4-8 bar overall dimensions (L x W x H): approx. 15,000 x 2,200 x 3,000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Zwillings-Trommelspiral-Heißluftofen direkt aus einer geschlossenen Fabrik, wurde zur Vor-Garung von Burgern und Nuggets eingesetzt. Diese Maschinen sind speziell für das Hochleistungsgaren, Grillen und Dämpfen einer Vielzahl von Produkten konzipiert. Der Gar-, Grill- oder Dämpfgrad wird durch die Lufttemperatur, die Luftgeschwindigkeit, die Luftfeuchtigkeit und die Verweilzeit des Produkts im System bestimmt. Fedpfx Ahomrrwfs Djpn Elektrisch beheizt. 96 m x 600 mm Band. Im Einsatz von 2007 bis 2016, als der Vertrag in ein anderes Werk verlagert wurde. Die Maschine befindet sich in ausgezeichnetem Zustand. Wir verfügen außerdem über weitere Ausrüstung aus der Fabrik – Former, Fritteusen, Beschichtungsmaschinen, Filter, Spiralfroster, Verpackungslinien usw. Bitte beachten Sie, dass die Fotos vermutlich zwei verschiedene Öfen zeigen – beide sind jedoch baugleich bzw. sehr ähnlich.

Stanje: novo, Leto izdelave: 2024, Furnace output: 34 kW Working output: 29 kW New device, original packaging: Yes Fpedopkwhqepfx Ah Djn Warm air blower, flue gas fan, and control panel with digital display: included Warm air distribution pipes: 2 x 180 mm with 2 freely rotatable, plug-in bends Intake/air filter: large-surface fresh air filter with no loss of performance / included Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Combustion chamber height: 590 mm Air delivery: 2200 m³/h Power consumption: 400W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air pipes: 1560 mm Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industries and workshops. They are designed to heat larger areas such as factory halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up periods and can warm production halls, joineries, or carpentry shops as well as other production sites in a very short time. Fedpfx Aevz Hq Heh Dspn Solid wood and its by-products (e.g., solid timber board scraps, chips, sawdust, pellets, or briquettes) are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the German 1st BImSchV. - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow: 4,900 m³/h - Combustion chamber depth: 650 mm - Feed door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Combustion chamber negative pressure: 0.2-0.3 mbar - Flue draught requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable floor area: approx. 220 m² - Required space: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney pressure: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 200 mm - Further technical details can be found in the attached data sheet The two hot air outlet pipes are located at the lower rear side of the furnace. A maximum of 20 meters of pipe per outlet is permitted for air distribution.

Stanje: novo, - NEW - Kanuk® Original Fsdpfx Asvwf Rkjh Dopn Hot Air Stove Nominal heat output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue gas temperature (°C): 216 Log length (cm): 48 Wood consumption (kg/h): 3.9 Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes No. 2100102

Stanje: novo, Leto izdelave: 2024, Fire chamber output: 34 kW Working output: 29 kW Fpedpfx Ahsk Utras Den New device: yes, originally packed Warm air blower, flue gas blower, and control unit with digital display: included Warm air ducting pipes: 2 x 180 mm with freely rotatable plug-in 90° bends Flue outlet diameter: 160 mm Fire chamber length: 500 mm Fire chamber width: 400 mm Fire chamber height: 590 mm Air delivery rate: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air ducting pipes: 1560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Weight: 190 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industry and craft enterprises. They have been specifically designed for heating large work areas, such as workshops and workspaces in trade and industrial businesses. These hot air systems require no lengthy preheating phases and quickly warm up carpentry or joinery shops as well as other production facilities. Suitable fuels include solid wood and wood processing by-products, such as solid wood panel residues, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392/CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the required emission values in accordance with the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 7,500 m³ Fpsdpjvz Hqyofx Ah Djn - Heatable area: approx. 1,600 m² - Space requirements: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference): 350 mm - Efficiency: 85–90% - Chimney pressure: 11.5 Pa - Flue gas temperature: 289°C - Hot air outlet connectors: 2 x Ø 450 mm - For further data, please refer to the attached data sheet The two pipes for the outgoing hot air are located at the lower rear of the furnace. For each pipe, a maximum duct length of 20 meters is permissible for air distribution. Greater lengths are optionally available by agreement with the manufacturer. Please contact us for details.

Stanje: novo, - NEW - Without side cladding and without base frame Kanuk® Original Warm Air Furnace - Firebox opening H x W (cm): 90 / 64 Fpodpfjvwfz Ajx Ah Djn - Flue pipe connection: top / rear - Efficiency (%): 85.2 - Log length (cm): 55 - Minimum chimney draft (Pa): 16 - Ash pan: No - BimSchV Stage 2: Yes - Lignite briquette: No - CE mark: Yes - Total output (kW): 26 - Space heating capacity (m³): 1000 - Viewing window (cm): 34.5 x 22 - Weight (kg): 193 - Wood consumption (kg/h): 6.5 - Flue gas throttle: No - Design type 1 (self-closing door): Optional - Split logs, Wood briquettes: Yes - AT §15a B-VG Standard: Yes - External air supply connection (mm): 120 mm - Dimensions H x W x D (cm): 90 / 64 / 110 - Flue pipe connection (mm): 160 - Door diameter (cm): 28 - Flue gas temperature (°C): 229 - Flue gas mass flow (g/s): 18.5 - Firebox H x W x D (cm): 50 x 55 x 55 - Air wash system: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - LRV Switzerland: Yes No. 2100109

Stanje: novo, Leto izdelave: 2024, Nominal combustion chamber output: 49 kW Operational output: 45 kW New unit, original packaging: yes Warm air blower, flue gas blower, digital control display: included Warm air distribution ducts: 2 x 200 mm with freely rotatable plug-in bends Flue outlet diameter: 180 mm Combustion chamber length: 660 mm Combustion chamber width: 480 mm Combustion chamber height: 600 mm Air delivery: 3500 m³/h Power consumption: 550 W Designed for room volume: 1000 m³ Fpsdpfx Ahok Utrds Don Area to be heated: 200/250 m² Stove height without warm air ducts: 1750 mm Stove width: 700 mm Stove length without flue gas blower: 1150 mm Weight: 305 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot air furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industry and craft businesses. They are designed for heating larger utility areas such as workshop halls and workspaces of industrial and artisanal enterprises. These hot air systems require no long warm-up phases and quickly heat up the workshop, carpentry, or other production facilities in a short time. Solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, can be used as fuel. MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the machinery safety directive 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output (kcal): 12,720 - Fuel consumption: 4.5 kg/h - Air flow: 2,400 m3/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2 – 0.3 mbar - Draft requirement (nominal output): 0.18 mbar - Heatable room volume: approx. 300 m3 - Heatable area: approx. 60 m2 - Space requirements: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Required chimney draft: 11 Pa Fjdpsvz Hqtsfx Ah Djpn - Flue gas temperature: 286 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two hot air outlet pipe connections are located at the rear bottom of the unit. A maximum duct length of 20 meters per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2024, Furnace output: 125 kW Fpjdpjk Utrhjfx Ah Den Operating output: 99 kW Flue outlet diameter: 180 mm Warm air distribution ducts: 2 x 250 mm Combustion chamber length: 750 mm Combustion chamber width: 560 mm Combustion chamber height: 700 mm Air delivery: 6,300 m³/h Power consumption: 1,500 W Designed for room volume: 1,500 m³ Area to be heated: 300/350 m² Stove height without warm air ducts: 1,980 mm Stove width: 800 mm Stove length without flue gas fan: 1,280 mm Weight: 415 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide the ideal solution for energy utilization in wood processing industries and workshops. Designed for heating large utility areas such as factory halls and workspaces in craft and industrial operations, these hot air systems require no prolonged preheating phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Fuel materials include solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety directive of machinery 89/392 CE. All MARTINA Series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission values required by Germany’s 1st BImSchV regulation. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air fan: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Footprint required: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet nozzles: 2 x Ø 200 mm - Further technical data available in the attached data sheet Fedpfx Aovz Hqmeh Dspn The two hot air outlet connections are located at the rear lower section of the furnace. Each outlet may be connected with a maximum pipe length of 20 meters for air distribution.

Stanje: novo, Leto izdelave: 2024, Furnace output: 49 kW Fodpepn Nyzjfx Ah Djpn Working output: 45 kW New device, original packaging: Yes Warm air blower, flue gas blower, electronic controller with digital display: included Fresh air filter, recirculation intake filter: large-area intake filter without performance loss / included Warm air distribution ducts: 2 x 200 mm with plug-in, freely rotating 90° elbows Flue diameter: 180 mm Furnace chamber length: 660 mm Furnace chamber width: 480 mm Furnace chamber height: 600 mm Air delivery: 3,500 m³/h Intake air filter: Yes, large-area filter without performance loss Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger usable areas such as factory halls and workspaces in industrial and craft enterprises. These hot air systems do not require long heat-up periods and can quickly warm up workshops in joineries, carpentries, or other production facilities. Fuel materials include solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE (Italian Presidential Decree No. 459 of July 24, 1996) and safety directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission standards stipulated by the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 kcal - Fuel consumption: 50 kg/h - Air delivery rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (outlet): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet Fodpfx Aevz Hqgoh Depn The two pipe connectors for the outgoing hot air are located at the rear of the furnace at the bottom. Each pipe connector allows a maximum of 20 meters of ducting for air distribution.

Stanje: novo, Leto izdelave: 2024, Furnace output: 350 kW Working output: 279 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 300 mm Furnace length: 1,200 mm Fpjdpjk Utrtsfx Ah Dsn Furnace width: 740 mm Furnace height: 1,040 mm Air delivery: 17,800 m³/h Warm air blower power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without warm air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed to heat large usable areas, such as workshops and workspaces in craft and industrial facilities. These warm air systems require no long preheating phases and heat the workshop or production space – such as in carpentry or joinery shops – within a very short time. They can be fueled with solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37CE, Presidential Decree Italy No. 459 dated July 24, 1996, and Safety Directive 89/392 CE. All MARTINA series warm air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both levels of the 1st BImSchV prescribed emission limits. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 Kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air fan: 1.05 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable surface: approx. 500 m² - Required space: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (outlet): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 287 °C Fpjdpsvz Hhxjfx Ah Den - Warm air outlet sockets: 2 x Ø 220 mm - For further details, please refer to the attached data sheet. The two pipe flanges for warm air discharge are located at the rear bottom of the furnace. A maximum pipe length of 20 meters is permitted per flange for air distribution.

Stanje: novo, Leto izdelave: 2024, Furnace output: 510 kW Fodpfxok Utrws Ah Djpn Effective output: 407 kW New equipment, original packaging: Yes Flue outlet diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heatable area: 1,800 m² Furnace height without hot air ducts: 3,000 mm Furnace width: 1,220 mm Furnace length without flue gas fan: 2,700 mm Weight: 1,575 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 10.198 h, Funkcionalnost: popolnoma funkcionalen, Hladilni sušilnik Kaeser TH451 45 m3/min Leto izdelave 2010 Fsdexiva Njpfx Ah Dspn

Leto izdelave: 2021, Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Fpodpfx Ahjg Dgyme Djn Max. loading weight: approx. 2.5 t Control system: Siemens S7

Stanje: rabljeno, Pneumatic C-frame Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic Press Serial No. 3437 Year of manufacture: approx. 1990 Pressing force: 3.0 tons at 6 bar Pressing force: 2.6 tons at 5 bar Pressing force: 2.2 tons at 4 bar Pressing force: 1.6 tons at 3 bar Pressing force: 1.0 ton at 2 bar Throat depth: 150 mm Fpjdpfow A Srwsx Ah Den Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool holder: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical force booster (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirements (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Stanje: rabljeno, primerno za termo-oljno ogrevanje (180 kW) Fpsdpfoxgg Hujx Ah Dsn Najvišja temperatura pečenja 220–250 °C nastavljiva temperatura brezstopenjska hitrost širina tira 600 mm pokrov z električnim dvižnim mehanizmom primerno za parno injekcijo (ogrevanje, izkoristek proizvoda) 400V-50 Hz-42A Mere (D x Š x V): ± 10.000 x 2.000 x 2.700 mm min. čas pečenja: 4 min maks. čas pečenja: 60 min

Stanje: rabljeno, Pneumatic toggle press, SCHMIDT Type 34-12 pneumatic press Manuf. No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force: 28 kN = 2.8 tons Throat depth: 130 mm Ram surface: 63 x 36 mm Ram stroke: 12 mm Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 2 to 6 bar - Stroke length continuously adjustable via adjustable fixed stop for the upper stroke end position - Fine adjustment for lower stroke end position with scale (1 graduation = 0.05 mm) - Stroke release via pneumatic valve, activation by material insertion - 45° press stand, custom aluminum construction - Special press tooling for 3x Ø 2.5 mm punch holes - Complete assembly mounted on aluminum base plate 600 x 600 x 20 mm Installation space (L x W x H): 720 x 600 x 600 mm Weight: 68 kg Fpjdev Srfkjpfx Ah Dsn Very good condition