Paternoster nakup rabljenega (189)

Stanje: delavnici obnovljeno (rabljeno), Stroji je bil posodobljen z novim LTG krmiljenjem StoreControl L Možna opcijska nadgradnja krmiljenja Trenutno na voljo 5 (od prej 6) enakih strojev Zunanje dimenzije: Višina stroja 5.900 mm Širina stroja 1.580 mm Globina stroja 2.680 mm 30 nosilcev, vsak z nosilnostjo 250 kg v uporabnih svetlih dimenzijah: Š = 1.250 mm G = 825 mm V od 0 do 750 mm Skupna nosilnost do 20.000 kg Začetek odprtine za upravljanje na 860 mm nad tlakom, višina odprtine 1.000 mm Barva siva / temno siva, nosilci sendzimir pocinkani Površina očiščena, možne so sledi uporabe in manjše deformacije Tehnične lastnosti: Vertikalni pogon 1 x x,0 kW / 400 Volt Horizontalni pogon 1 x 0,xx kW / 400 Volt Druga oprema: Dvižna vrata ročno upravljana Itjdpjg Dckusfx Ah Asr Možni so popravki, tehnične spremembe, podrobna odstopanja na fotografijah Dobava in montaža trenutno predvsem v D, A in več sosednjih državah

Stanje: dober (rabljeno), Keyence XG-7501P Multi-Camera Image Processing System Controller XG7501P Iodpfxeib Dncj Ah Astr Manufacturer: Keyence Manufacturer Part Number: XG-7501P Type: Multi-Camera Image Processing System, Controller Side cover included Country of Manufacture: Japan Item condition: This item comes from the closure of operations of one of Germany’s largest automotive parts suppliers and was stored in paternoster systems. Therefore, some original packaging is missing and certain items may show signs of storage.

Stanje: zelo dobro (rabljeno), Here we offer you a chamber dryer. External dimensions (approx.): Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Usable chamber dimensions (approx.): Width: 1,030 mm Iodpfxegm Hwus Ah Aotr Depth: 1,000 mm Height: 2,100 mm Usable volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive substances. The chamber heating oven must not be installed in hazardous (Ex) areas. Paternoster system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Number of carrier trays: 13 pcs Tray pitch: 228 mm Tray width: 354 mm Tray depth: 320 mm Usable tray height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min Permissible load/tray: max. 10 kg Total permissible load: max. 130 kg Total weight (loaded): max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) (Technical specifications, data, and descriptions are subject to changes and errors!) For further questions, we are happy to assist you by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/20-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Itsdpfxjxyyguo Ah Ajr Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Leto izdelave: 2025, Stanje: novo, Naravna kavčukova membrana ali silikonska membranska plošča Na področju izdelave 3D pohištvenih front vam nudimo tudi rešitve za preše, stroje za rezanje folij, vertikalne skladiščne sisteme za folije ter čistilne stroje! MEMBRANA za membranske preše – iz silikona ali naravnega kavčuka Najvišja kakovost, primerna za vsako membransko prešo (preše za folijo in furnir). Naše membrane lahko prejmete že narezane na želene mere ali kot blago v rolah. NARAVNI KAVČUK Tip: RM-2 Barva: siva Površina: gladka/gladka Standardne širine: 1700 in 2000 mm Kavčuk: naravni kavčuk Trdota: cca. 42°Shore Debelina: 1,8 mm, 2,5 mm in 4 mm Itodpfxoi E Hp Te Ah Asr Obratovalna temperatura: min.-20°C/max.+130°C

Stanje: rabljeno, Leto izdelave: 1980, Strojni primež CEKABA A12 Širina čeljusti: 120 mm Teža stroja: ca. 14 kg +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista možni. Naš oglas vsebuje najbolj reprezentativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. Iedefh Dtzepfx Ah Ajtr +++++

Stanje: delavnici obnovljeno (rabljeno), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with 500 kg load capacity in usable clear internal dimensions: Width: 1,300 mm Depth: 863 mm Height: from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operator opening at 870 mm above finished floor level, then 845 mm high Ijdpfsn D A Rrsx Ah Astr Colour scheme: GREY / BLUE, carriers hot-dip galvanized (Sendzimir process) Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manually operated lift door Subject to errors, technical modifications, detail deviations from photos Delivery & installation currently primarily in Germany, Austria, and other neighboring countries

Stanje: zelo dobro (rabljeno), Belt conveyor 1.34m with drive Length: 134 cm Width: 50 cm Height: 90 cm Complete factory closure, large selection of mezzanine floors, pallet racks, shelving systems, paternosters. High-quality industrial machinery, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! Itodpfxehvmlvj Ah Ajr International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: XP500-1850x864, skupna višina: 7.800 mm, skupna širina: 2.180 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 520 kg, gradbena višina: 7.800 mm, gradbena širina: 2.180 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 230 V, višina mize: 800 mm, trajanje garancije: 6 meseci, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 12/2025, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Tukaj so na voljo 4 identični stroji tipa Kardex Shuttle XP500, letnik 2010. Stroji so bili vsako leto vzdrževani in pregledani s strani proizvajalca ter po potrebi servisirani. Stroji so v zelo dobrem stanju, strokovno osebje jih bo demontiralo in na želeni lokaciji sestavilo, preverilo in zagnalo. Za dodatna vprašanja smo vam z veseljem na voljo. Za vsako napravo nudimo 40 polic, po potrebi pa lahko dobite tudi dodatne police. Itsdpfx Aexuwazjh Aer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Zunanje mere: Višina: 5650 mm Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Širina: 2.780 mm Globina: 2.312 mm Mere zabojnika: Višina: 55 mm Širina: 2450 mm Globina: 864 mm Nosilnost police: 270 kg na predal Število polic: Število na željo stranke. Itsdpfx Ajxmgwajh Aer Skupna nosilnost: 2 x 33.150 kg Število izvzemov: 1 Barva: modra Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Prodaja izključno v DACH-države (Nemčija, Avstrija, Švica) in Beneluks (Nizozemska, Belgija, Luksemburg). Obveščamo vas, da trenutno prodajamo ali dostavljamo samo v D-A-CH in Be-Ne-Lux države. Prosimo za vaše razumevanje.

Leto izdelave: 2025, Stanje: novo, Silicone membrane sheet for membrane presses, silicone membrane for membrane presses, natural rubber membrane MEMBRANES for membrane presses – Silicone or Natural Rubber Top quality, suitable for all membrane presses (foil and veneer presses). Itedpfx Aheff Agie Asr Our membranes are available either pre-cut to your required dimensions or as roll goods. In the field of 3D cabinet front production, we also offer solutions for presses, foil cutting machines, carousel foil storage systems, and cleaning machines! MEMBRANES for membrane presses – made from silicone or natural rubber Highest quality, suitable for all membrane presses (foil and veneer presses). Our membranes are available either pre-cut to your required dimensions or as roll goods. SILICONE Type: SM-1 3mm Colour: translucent milky Surface: smooth / smooth Standard widths: 1700 and 1800 mm Polymer base: silicone Hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 230°C SILICONE Type: SM-1 2mm Colour: translucent milky Surface: smooth / smooth Standard widths: 1700 mm Polymer base: silicone Hardness: 50° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. 230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth / smooth Standard widths: 1700 and 2000 mm Rubber: natural rubber Hardness: approx. 42° Shore Thickness: 1.8 mm, 2.5 mm and 4 mm Operating temperature: min. -20°C / max. +130°C In the area of 3D furniture front production, we also offer solutions for presses, foil cutting machines, carousel foil storage systems, and cleaning machines!

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.650 mm, skupna širina: 2.777 mm, skupna dolžina: 3.112 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, SHUTTLE XP500 40 polic po 500 kg Višina 5650 mm Pripravljen za naklad, cena vključuje natovarjanje na tovornjak Ponovna montaža na zahtevo Itodpfsxvccwjx Ah Aor

Stanje: dober (rabljeno), Leto izdelave: 2002, Regalni paternoster, Megamat, približno 3,04 m visok, 350 kg / gondola – rabljen - : Cena iz skladišča: 9.950.-€ (neto), demontaža v lastni režiji! Proizvajalec: Megamat Tip: 1568/267/16 Leto izdelave: 2002 Itsdpfx Ajxbhlnjh Asr Številka naprave: 16178 Višina naprave: 304 cm Širina naprave: 388 cm Globina naprave: 205 cm Število gondol: 16 Vmesne police: cca 16 kosov - Če da: število: 64 - Če da, odstranljive? Da Dimenzije gondole: Višina: cca 20 cm (z vmesnimi policami cca 10 cm) Širina: 325 cm Globina: 60 cm Skupna nosilnost: 5600 kg Nosilnost na gondolo: 350 kg Neuravnotežena teža: 1.000 kg Upravljanje: z Kardex Drive in SAP 3/N/PE 230/400V, 9A, varovalka dovoda 16A Stanje: dobro Na voljo: takoj Lokacija: Herrenberg

Stanje: dober (rabljeno), Programming Cart KP-Qume QVT52 III comprising: Mobile PC Type: KP-Qume QVT52 III Screen size: 14" (35.5 cm) Screen type: Flat, white phosphor CRT Display: 24 lines / 80 or 132 characters / 1 status line / 1 user line Character representation: - 80 characters: 14 x 15 dot matrix in a 16 x 16 cell or 14 x 12 dot matrix in a 16 x 13 cell - 132 characters: 7 x 15 dot matrix in a 10 x 16 cell or 7 x 12 dot matrix in a 10 x 13 cell Refresh rate: Depending on character mode: 78, 70, or 65 Hz Itodpfjivd Easx Ah Asr Character sets: 96 ASCII characters, 7-bit ISO. In QVT119+ emulation: IBM codepage 437/850 Screen saver: Yes, adjustable timer Memory: Depending on emulation, 4 or 7 screen pages Keyboard: New ASCII (N.A.), various languages, 20 + 1 programmable function keys Emulations: Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces: 2 serial up to 38.4kBaud / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR, or none / Option: RS422 or current loop Data format: 7 or 8 bit / even, odd, or no parity / parity check on or off / 1 or 2 stop bits Transmission mode: Full or half duplex / block mode Printer interface: 1x serial, RS232 DB 9 Power supply: 95 - 264 VAC, 47 - 63 Hz Power consumption (max.): 24 W Additional hardware: Bosch FDS 514 floppy drive Bosch PDV controller Bosch HBG 2 handheld device including cart and various data cables Condition: used Complete plant closure. Large selection of mezzanines, pallet racks, shelving racks, paternosters available. High-quality industrial machines, lathes, grinding machines, hand tools. Further items—new and used—available in our shop! International shipping costs on request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/10-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT Iodpsxr Ng Usfx Ah Aotr - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Leto izdelave: 2023, Stanje: novo, In the field of 3D thermoforming, we also offer presses, turners, film storage carousels, and membranes for sale on Machineseeker! RBM 1500 Features • Four-head rotary brush system • Infeed inclined roller conveyor with separation unit • Spiral brush for removal of loose adhesive residue Options • Fifth head rotary brush • Outfeed accumulation roller conveyor with buffer function • Deionization of front panels after cleaning • Modem for remote maintenance Advantages • Random loading possible due to automatic adaptation to front thickness and size • Up to 2,000 parts per 8 hours The RBM 1500 is a brushing machine for film-laminated 3D furniture fronts. The proven four-head rotary brush system removes adhesive overspray from the reverse sides of furniture fronts, ensuring optimal edge finishing. This is achieved by pneumatically controlled disc brushes that adjust their pressure and clean the rear of the panels. The RBM 1500 is designed for a capacity of up to 2,000 parts per shift, making it the ideal brushing system for small and medium-sized production runs. The RBM 1500 is equipped with automatic size and thickness detection for furniture fronts. This allows for adaptation to random loading without any loss of throughput time. The flexible control system enables brushing of both rectangular and contoured parts. Low-maintenance brushes and long service lives ensure low production costs. Production Specifications Iedpfxod S Eagj Ah Aotr Machine: RBM 1500 Front shape: Rectangular / Contoured Minimum front size (L x W x H): 180 x 90 x 15 mm Maximum front size (L x W x H): 3000 x 650 x 38 mm Brushing operation: 2,000 parts per 8 hours Standard part size: 650 x 400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 13.450 mm, skupna širina: 4.135 mm, skupna dolžina: 3.092 mm, nosilnost na odsek shranjevanja: 400 kg, vhodna napetost: 400 V, nosilnost: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13.450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of Manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid subject to prior sale. Technical details per Logimat unit: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum number of trays (approx.): 91, each 400 kg, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint (approx.): 12.8 m2 - Capacity with 91 trays: approx. 269 m2, each tray approx. 2.95 m2 - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if desired. Photos and videos of operation and dismantling are available on request via email. Price: special export price Price: excl. VAT Delivery time: in stock Ijdpfx Aeru A Atjh Aetr We have 3 Schäfer Logimat units in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.050 mm, skupna širina: 2.640 mm, skupna dolžina: 1.150 mm, lastna masa: 2.000 kg, Demontaža in prodaja rabljene samodejne vertikalne rotacijske skladiščne enote tipa Karusel Kardex INDUSTRIEVER. Višina 3,05 m, širina 2,64 m, globina 1,15 m, 24 pladnjev. Brez vidne identifikacijske ploščice – ni natančnih podatkov o nosilnosti, najmanj 50 kg na pladenj, niti o letu proizvodnje. Višina pladnja: 17 cm, uporabna širina: 2 m, uporabna globina: 34 cm, vsak pladenj z ustavljalno letvijo. Zadnji servis Kardex: 01/2024 Po dogovoru možna tudi dobava zabojnikov. Isdpfexxy Hlex Ah Ajtr Ponovna montaža možna na zahtevo.

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 434981, skupna višina: 5.500 mm, skupna širina: 170 mm, skupna dolžina: 3.450 mm, gradbena višina: 5.500 mm, For sale is a used Electrolux Constructor paternoster, model IPN 7000. The machine is used, fully functional, and equipped with a new control system. Max. compartment load capacity: 300 kg Max. lift load capacity: 6,600 kg Compartment width: 2,730 mm Compartment depth: 430 mm Compartment height: 370 mm Width incl. front panel: 1,700 mm If you are interested, please contact us. Price: €16,000 net. Itsdeud Ihtjpfx Ah Asr A video demonstrating the machine in operation can be provided upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KU 4165M, potovalna razdalja osi X: 572 mm, pomik osi Y: 322 mm, pomik po osi Z: 265 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 22, The value of the supplied spare parts amounts to approx. € 70,000 TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: unlimited Remote Diagnostics: available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: parallel to main time, manual, with 3-axis handling or robot Part Feeding: paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Iedpfx Ajxamh Eoh Aotr Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-axis: 1,000 rpm Rotational Speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis clamped: 1,000 Nm Torque B-axis unclamped: 287 Nm Torque C-axis clamped: 300 Nm Torque C-axis unclamped: 187 Nm Main Spindle Tool Holder: HSK 40-A Outer Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal Coolant Supply up to: 120 bar Spindle Distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Operation: pneumatic, 6 bar Tool Changer Tool Discs: externally presettable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with Free Position: 105 mm Shortest Chip-to-Chip Time: ≥ 1 s Max. Weight of Tools on Disc: 15 kg Positioning Time per Tool Step: 250 ms Tool Holder: HSK 40-A, as per DIN 69893 MACHINE DETAILS Machine Dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per Machining Module: approx. 4.5 t Weight per Loading Module: approx. 2.5 t

Stanje: delavnici obnovljeno (rabljeno), Currently, 2 identical machines are still available. Mechanically overhauled machine with new LTG control system StoreControl L. External dimensions: Installation height: 5,200 mm (modification possible at extra cost) Installation width: 1,600 mm Installation depth: 2,800 mm 38 carriers, each with a payload capacity of 250 kg with the following usable internal dimensions: Width: 1,300 mm Depth: 825 mm Height: from 55 to 750 mm Total machine payload: up to 2 x 10,000 kg Start of access opening at 875 mm above finished floor level (FFL), then 875 mm high Color: GREY / BLUE, carriers Sendzimir-galvanized, surfaces cleaned, signs of use possible Performance data: Vertical drive: 1 x 3.5 kW / 400 Volt Horizontal drive: 1 x 0.75 kW / 400 Volt Subject to errors, technical modifications, and detail deviations from the photos. Delivery and installation currently mainly within Germany, Austria, and several neighboring countries. Isdjd Hxpvjpfx Ah Aetr

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), * Press size: 2800x1500mm * 2 pcs. tables with automatic Variopin system Ijdpfsi Ary Dox Ah Astr * Feeder and cutting station * Turning device * Foil storage paternoster * Pin system with Siemens S7 PLC control * Scrap foil press HSM 605

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Itodpfx Aexq Tbtjh Aor Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Leto izdelave: 2023, Stanje: novo, In the field of 3D thermoforming, we also offer presses, brushing machines, film storage carousels, and membranes on Machineseeker! Function Description: When the feed tray moves into position at the press exit, the workpiece carpet is pushed under the holding device. Through the generation of vacuum, it is held in place and then rotated 180°. The vacuum is then deactivated and the workpiece carpet has been turned, allowing the entire batch to be processed directly further on the turner. The batch is automatically discharged by the turner and placed on a side station for further processing. Advantages: • Increased production capacity due to rapid emptying of the press table • Time and personnel savings – as rough precutting is completely eliminated • Easier handling and control of parts • The film edges of 3D furniture fronts are protected, as the foil is not pulled over the edge of the furniture front • Automatic discharge is optionally available, enabling the entire workpiece carpet to be cut in a mat cutting machine • The pins are preserved with this turning system, as cutting does not occur on the pin table Design Features: • Torsionally rigid welded frame to house machine components • Standard dimensions approx. 2800 mm x 2220 mm x 1200 mm • Hydraulic unit for the turning process • Turning table consisting of 9 arms with foam rubber coating • Vacuum system including hose connections for the turning table Itedpfod S Dqnex Ah Aer • Turning cycle time: approx. 18–25 seconds • Installed power: approx. 8 kW • Siemens LOGO control system • Protective fences and safety devices included A video demonstrating the turning process is available upon request.

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C Isdpfx Ahed S Efas Ajtr SILICONE Type: MS-1 Colour: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm