Skladiščno dvigalo

Haenel Lean-Lift 3060-825

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/10-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Gbjdexr Ng Uepfx Ag Aot Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), skupna masa: 3.800 kg, največja hitrost vretena: 600 obr/min, število osi: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a robust grinding spindle peak power of 16 kW. The machine accommodates a wide range of workpiece sizes with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking for high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Contact us for more details. • Workpiece Carrier A-Axis: Direct drive/hollow shaft motor; Indexing accuracy ±15''; Indexing possibilities 1-999; Cumulative lead error over 100 mm: 8 µm; Max. speed: 600 rpm • Tool holder: ISO 50 • Spindle sleeve clearance: max. 28 mm (automatic clamping: Ø20 mm) • Rated drive power: - Grinding spindle S1-100%: 7.5 kW; peak: 16 kW - X-axis longitudinal travel: 2 kW - A-axis workpiece carrier: 2 kW - Z-axis cross slide: 2 kW - Y-axis grinding head slide (vertical): 2 kW - B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: - A-axis: direct measuring system - B, X, Y, Z axes: indirect measuring system - Resolution X/Y/Z: 0.0001 mm (0.1 µm) - Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; pre-fusing: separate supply from network • Compressed air: 15-17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated with included measurement instructions (no marked reference points) Additional Equipment • Workpiece changer options (automation): - Option 1: Pick-up variant - Max. workpiece: Ø20 mm × 120 mm; 1 kg - Capacity per pallet: • Ø3.0-5.0 mm shank: 40 pcs • Ø5.1-8.0 mm: 32 pcs • Ø8.1-11.0 mm: 28 pcs • Ø11.1-14.0 mm: 24 pcs • Ø14.1-20.0 mm: 20 pcs - Option 2: Chain loading magazine (with gripper unit) Gbsdpfx Ajyiz R Ueg Aet - Capacity: 64 workpieces - Max. workpiece: Ø32 mm × 200 mm; 2.5 kg - Features: chaotic loading of various workpieces; automatic collet change possible - Clamping sleeves: Ø6, 8, 10, 12, 14, 16, 20 - Option for external chain loader: increases machine weight to approx. 3,800 kg and required space to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): installation by customer; air for backflushing approx. 700 Nl/min for 5 min every 6-9 hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/20-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Gedpfxsxyyguo Ag Aebt Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Stanje: generalkompletno obnovljen (rabljeno), Herma polavtomatski etiketirni stroj za ovijanje, Allen vroči žig kodirnik, s priloženimi rezervnimi deli in navodili za uporabo, vse nameščeno na nerjavni mizi, 1-fazni priklop. Gedpfxoib Dcrs Ag Ajbt

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Širina: približno 8,5 m Dolžina: približno 7,95 m Naprava je razstavljena Gbjdpfx Agsbruzgo Ajt Naprava se prodaja »kot je«. Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2002, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Grinding diameter - max. 238 - 620 mm Grinding length 190 mm Workpiece length 380 - 940 mm Spindle speeds - infinitely variable 2 - 12,000 rpm Power supply 380 kVA Main drive power - grinding motor 1.1 kW Total power consumption 2.2 kW Machine weight approx. 0.6 t !!! We keep nearly all spare parts for Deckel S 11 machines in stock !!! !!! Accessories can be configured as desired !!! We are happy to take your used Deckel S 11 in part exchange – feel free to contact us! DECKEL S 11 UNIVERSAL TOOL GRINDER 2189 400 V, 50 Hz, with CEE plug and cable Paint finish: Upper section pastel turquoise RAL 6034 Base blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new!! * Accessories: * Dividing head SK 40 with 24-position indexing plate R * Indexing plate 20 R * Drawbolt M16 69871 * Helical and clearance grinding unit with rack housing * Counter-support with 4 tailstock centers * Center point with driving dog * Dressing unit * Diamond dresser * Radius grinding device SK 40 complete with setting gauge * Toolholder for above * Support finger with slide inserts * Support finger holder Gedpfx Agsw U Eg Re Aebt * Complete dust extraction (without vacuum unit) * Halogen lamp * Gear tooth support complete * Setting gauge * Collet sleeve and ejector nut and spanner * 35 collets 1.0 – 18.0 mm in 0.5 mm increments * 1 set direct collets SK 40: 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm * 6-jaw grinding chuck * 3 taper reducing sleeves SK 40 x MK 1, 2, 3, 4 * Clamping nut * 20 grinding wheel adapters * 2 protective covers * Various diamond/Borazon wheels * Operator’s manual, operating keys, spare parts list, wiring diagram * Complete set of grinding instructions Machine is partially overhauled and comes with electrical inspection report !! For an additional charge, various measuring optics (new or used) with measuring cross slide are available !!

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), The Coiltech Decoiler Straightener Feeder System is a compact coil feeding system for presses. Strip width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler capacity: 6000kg, inner diameter (min-max): 470-520mm. Connected load: 7.5kW, supplied with documentation. Gbsdpfxei El Uce Ag Ast

Stanje: rabljeno, Leto izdelave: 1996, skupna višina: 2.150 mm, skupna dolžina: 1.420 mm, skupna širina: 2.010 mm, skupna masa: 3.100 kg, hitrost vretena za brušenje: 6.000 obr/min, potovalna razdalja osi X: 400 mm, pomik osi Y: 250 mm, pomik po osi Z: 580 mm, Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC Control: HMC 400 CNC Gedpfx Aszavqweg Aobt Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 580 mm C-axis (table rotation): ± 200° Max. grinding wheel diameter: Ø 200 mm Spindle speed (grinding): 3,000 / 6,000 rpm If you have any questions about the machine, please feel free to contact us by phone or email. Take a look at our other listings to get a complete overview of our inventory.

Stanje: rabljeno, Jeklena konstrukcija za dvigalo. Širina: približno 8,3 m. Gbjdobruzbopfx Ag Aot Dolžina: približno 5,1 m. Naprava je razstavljena. Naprava se prodaja »tako, kot je«. Ogled: Vabimo vas, da si ogledate izdelek. Enostavno nas kontaktirajte in se dogovorite za termin. Opozorilo: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Max Ø 114mm; Straight and curved round tubes; One grinding station; Gjdpfx Agotzkgbs Asbt Grinding of straight and curved round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system allows for belt grinding without rotating the tube, delivering optimal results. The feeding system safely advances straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3-22 Feed speed (m/s): 1-5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250