Okvir Za Mrežo nakup rabljenega (109.006)

Stanje: dober (rabljeno), 150 units stacking stillages, i.e. chair corlettes – used – : Price per unit ex location: €99 (net, excl. VAT)! Manufacturer: unknown, but likely Cordes Type: Stacking stillage Removable side bars Year of manufacture: unknown Type 1: Cs-1800.501: Dead weight: 135 kg Load capacity: 700 kg Superimposed load: 1400 kg Stackable: up to 3 high With bracket for forklift tines Type 2: Cs-1800.000: Dead weight: 114 kg Dkodpfx Afergrgfslsg Load capacity: 700 kg Superimposed load: 1400 kg Stackable: up to 3 high Both types: Mutually compatible Internal dimensions: 180cm x 130cm x 235cm (W/D/H) Steel sheet base 1.5mm thick Colour: Green RAL 6017 synthetic resin lacquer All four sides with one removable cross-tube connector each Insertable at 3 different heights at 700 / 1350 / 1850 mm (from top edge of base) Condition: good Available: immediately Location: 72379 Hechingen

Stanje: novo, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna višina: 750 mm, skupna dolžina: 500 mm, skupna širina: 450 mm, Machine base for FEMI band saws Dkjdsvzakaepfx Aflsg Height: 75 cm Width: 45 cm Length: 50 cm Multiple units available

Leto izdelave: 1988, Stanje: zelo dobro (rabljeno), 2 hydraulic clamps at the front 2 hydraulic clamps at the side Maximum working area: 1650 x 2300 Djdpjg Ulahjfx Aflekg

Stanje: rabljeno, Leto izdelave: 1982, Presskraft 40 t Ständerweite 695 bzw. 215 mm Hub 100 mm Tischaufspannfläche 650 x 440 mm Stößelfläche 580 x 285 mm Einbauhöhe 400 mm Gesamtleistungsbedarf 15 kW Maschinengewicht ca. t Abmessungen der Maschine (L x B x H): 1,63 x 1,05 x 2,61 m - mit Ziehkissen Dksdpfx Ajtqqq Rofljg - mit SICK-Lichtschranke

Stanje: novo, with rapid stroke system - NEW - Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor, 1400/2800 rpm instead of 2.2 kW Motor speed: 2800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Dedjvwf H Eepfx Aflokg Plunger system: 1 eccentric Weight: 246 kg Item No. 300015 including accessories: 1 piece 2-speed motor, 1400/2800 rpm instead of 2.2 kW, Item No. A250070 1 piece 90° stop, Item No. A350128 1 piece horizontal drilling grid system with 4 rows of holes (16, 20, 22, 25 mm), Bowden cable operation, Item No. A300255 1 piece 4-wheel chassis with 2 swivel castors and 2 locking devices on own frame, Item No. A350415 1 piece eccentric plunger with column and clamping cross, Item No. A250055

Stanje: rabljeno, Mesh Roll Container Order Picking Trolley 1060x800x1900 RA2408 Technical Data: Length: 1060 mm Width: 800 mm Height: 1900 mm Shelf length: 1040 mm Dodpjwh Dilofx Aflskg Shelf width: 740 mm Shelf heights: 290, 680, 1070, 1480 mm Wheel diameter: 200 mm Year of manufacture: unknown Condition: Used / Fully functional Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, please do not hesitate to contact us. Simply give us a call or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Stanje: rabljeno, Handling device, Handling system JÄGER HANDLING Manipulator for screwdriving technology Model: Handy-flex 300 Dksdpfogbpuhjx Afleg Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex outreach: 275 to 765 mm Outreach from frame: 725 mm Swivel radius at full outreach: approx. 135° Mounting plate height above floor: 1250 to 1650 mm Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm Mounting plate for tool holder: 305 x 90 mm - Operable in three axes (horizontal, vertical, rotatable) - BAUMER rotary encoder type GI355.022C315 for rotational and horizontal movement - Balancer for vertical movement - Adjustable load capacity - For weightless suspension of small devices - Ball bearing guides on all axes - Mounted in a frame made of BOSCH modular aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Required space (L x W x H): 1450 x 1250 x 2480 mm Net weight: 180 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, HESS drilling and hardware fitting machine. Single-unit with pneumatic clamps. Suitable for PVC and aluminium window production. Djdpfev H E Alox Aflskg

Stanje: pripravljen za uporabo (rabljen), Technische Daten Hauptkomponenten der Maschine: Dsdpfx Aetqkalsflskg - Längsverstellbare Führungsrahmen der 4 Spezialwagen zum Spannen und Bewegen der Werkstücke. Arbeitsbereich 14 m (X-Achse) - Die horizontalen und vertikalen Spannvorrichtungen für Werkstücke können über CAD/CAM automatisch deaktiviert werden, um die Bearbeitung von größeren als den Standardwerkstücken zu ermöglichen oder Kollisionen mit Spannmittel zu vermeiden. Falls es der Bearbeitungsprozess erfordert, können die Schlitten automatisch ausgetauscht werden. Die Struktur, auf der das Werkstück gespannt ist, kippt automatisch um 90°, um die Bearbeitung der Unterseite des Trägers zu ermöglichen. - Zentrales Gestell, in dem der Träger (quer zu den Führungsschienen) eingespannt wird - 1 Bearbeitungseinheit am Träger befestigt - Umhausung, die den Bearbeitungsbereich der Betriebseinheit abgrenzt Bearbeitungseinheit bestehend aus: - Querschlitten (Y-Achse) - Vertikalschlitten (Z-Achse) - Bi-rotierender Kopf (B- und C-Achse) - 17-kW-Synchronspindel mit bis zu 18.000 U/min, Innenkühlung und HSK-63E Werkzeugaufnahme - Bearbeitbare Querschnitte: 1.000 mm (600 mm bei Doppelspannern) x Stärke 300 mm 5-Achs-Steuerung (bi-rotierender Kopf) mit Tool Center Point (TCP) CAD/CAM-Software Kühleinheit für den Elektrosprindel mit Flüssigkühlung Automatisches Schmiersystem 1 horizontales Werkzeugmagazin mit 12 Plätzen HSK63E Vorbereitungs- und Auswahl-System Entladesystem, bestehend aus 6 Auflagen mit freilaufenden Rollen zum Entladen des bearbeiteten Werkstücks Späneförderband Lichtvorhänge an den Be- und Entladestellen sowie Schutzumwehrung Leistung und Antriebe: Spannung: 380 V Netzanschluss: Dreiphasig Gesamtmaße

Stanje: novo, Technical Data • System: for frame assembly • Minimum external frame dimensions (mm): 120 x 120 • Maximum external frame dimensions (mm): 700 x 2200 • System length (mm): 2750 Dkjdpfxofiqlle Aflsg • System width (mm): 1250 • System height (mm): 900 • Custom sizes: available Machine Features • Precise alignment of frame rails ensures no displacement of mitred surfaces relative to each other • Manual alignment of the frame rails is not required • Cost-effective frame production through automation • No fixture-based constraints on frame dimensions • Various popular methods for joining mitred frame corners are possible • Compact design results in a small footprint • Simultaneous bonding of intermediate layers possible • Complete fronts can be bonded in a single operation

Stanje: novo, with quick-lift system Djdpfx Afsvwfr Iolekg - NEW - Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor 1400/2800 rpm instead of 2.2 kW Motor speed: 2800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Actuator system: 1 eccentric Weight: 246 kg Article no. 300015 Including accessories: 1 piece 2-speed motor 1400/2800 rpm instead of 2.2 kW No. A250070 1 piece 90° stop No. A350128 1 piece horizontal drilling indexing system with 4 hole patterns 16, 20, 22, 25 mm Bowden cable operation No. A300255 1 piece eccentric actuator with column and clamping cross No. A250055

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: CR690, skupna masa: 1.350 kg, nosilnost: 100.000 kg, Električni podvoz Robot komplet 100 ton - OX TBC 100 Samohodni vozički imajo veliko nosilnost 100 ton in zelo nizko višino. Zasnovani so z možnostjo popolnega vrtljaja 360º, da jih je mogoče postaviti pod katerokoli vrsto elementa in premikati. Na voljo so tudi modeli z motornim pogonom in hidravličnim dvižnim cilindrom za nakladanje v vozila ali na police. Največja hitrost znaša do 5 m/min. Dodpfx Aow Taiksflekg Dolžina – 1602 mm Širina – 2019 mm Višina – 315 mm Maks. nosilnost / dvižna moč – 100 ton Daljinsko radijsko upravljanje

Stanje: rabljeno, Battery change rack, transport rack, storage rack for forklift battery Change table, battery pallet, battery exchange system, battery change cart Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Dksdpfx Afofgpfpolsg Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions (W x D) per compartment: 300 x 920 mm Compartment dimensions without center bar (W x D): 655 x 920 mm Adjustment height: 80 to 200 mm - Center bar removable - Also suitable for sheet material - 16 galvanized steel rollers Ø 50 mm - 4 fixed castors Ø 100 mm, 2 of them swivel with brakes - Fixed castors individually height-adjustable via threaded rods Overall dimensions (L x W x H): 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Stanje: rabljeno, Bending tool, die, upper blade, upper tool, straight tool - Tool for: press brake - Tool for: wire mesh, wire grid - Wire spacing: 50 mm - Thickness: 25 mm Dedpfxec Spnas Aflokg - Drawing in the images - Total length: 550 mm - Total height: 194 mm - Weight: 20 kg

Stanje: dober (rabljeno), Crane Frame 6800 mm This frame for cranes offers you the possibility to mount your crane and a trolley, as well as hanging scales or other suspended lifting devices. A-shaped supports provide the necessary stability. Supports: Square tubing 80 x 80 mm Djdpfxjwv Rcns Aflskg Double T-beam: 120 x 85 mm Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow You can find more items – both new and used – in our shop! International shipping costs on request!

Stanje: novo, Leto izdelave: 2025, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Technical Description: • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table • Stops 160 mm high Dkedo Nn Hyjpfx Aflsg • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Safety: • Emergency stop switch on control panel • CE conformity Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment

Stanje: novo, with rapid traverse system, swiveling drilling head, user manual included. Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 140 mm Motor power: 2.2 kW Motor speed: 2,800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Press system: 1 eccentric Motor swivel angle: 65° right/left Weight: 268 kg Item no.: 320010 A 250070 2-speed motor, 1,400/2,800 rpm, instead of 2.2 kW (LLB/BS/BSK) A 250055 Eccentric press with column and clamping cross to suit LLB 200/300/320 A 350415 4-wheel chassis for LLB 300/320/400 with 2 swivel castors and 2 brakes, on a separate frame A 250128 90° plug-in stop for LLB 200 A 350255 Dkodpfx Afjvwfrzolsg Horizontal drilling raster system SH LLB 300 D/320 D with 4 hole rows: 16, 20, 22, 25 mm, cable control

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Syspal 600HA2 Eurobin Waschrahmen Dksdpfx Afsnbdtiolsg 2021, Edelstahl, Tragfähigkeit 50 kg, 3-Phasen

Stanje: novo, - NEW - Standard Equipment: Motor 1.5 kW Spindle speed 2880 rpm Max. spindle height above table 160 mm Max. drilling stroke 345 mm Max. cross travel 245 mm Spindle stroke 160 mm Drill chuck capacity 0-20 mm Max. tool length 175 mm Eccentric clamp 1 pc. Rotating machine table 800 x 400 mm +/- 45° Swiveling/rotating drilling unit as an option Dkedpfjvwflzjx Afleg Tilting machine table as an option Machine dimensions 1500 x 1100 x 950 mm Machine weight 345 kg Included: - Extraction nozzle No. P41 55 - Second eccentric clamp No. P41 25 - Dowel drilling unit with 4 indexing positions No. P41 20 - Single-lever operation - 2 speeds 1.5/1.9 kW 1440/2880 rpm No. P41 07 - Digital display for spindle/drilling height No. P41 34

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, VKLEPNO PRIMORJE ZA OKNA ITALPRESSE Dksdpfsx Rrp Ejx Afljg

Stanje: novo, 4 lepilne palice, 1 pritisna prečka, hidravlična, z mehansko enoto okvirnega stiskalnika. Zunanje mere D x V 3000 x 2000 mm, približno 200 kg. Dodpfx Afsvrv H Sslskg

Stanje: novo, Leto izdelave: 2024, skupna višina: 2.100 mm, dvižna višina: 2.200 mm, lastna masa: 3.000 kg, nosilnost: 4.500 kg, Lifting mast for wood packages 1200 x 1200 mm, length 3000 - 6000 mm 5 lifting arms Dedpfx Aer Ddbgofljkg Max. load capacity: 4 t Dimensions (W x L x H): 2500 mm x 5000 mm x 2100 mm Lift: 550 - 2200 mm Gear motor: 400 V, 3 kW

Stanje: rabljeno, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty base frame construction for a level working surface. - Clamping of elements using 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg/4,200 N at 10 bar operating pressure. Clamping can be done in two groups: 5 and 4 pieces, allowing two elements to be clamped/worked simultaneously. - Working surface paneling with wooden boards as far as technically possible. (Optional perforated sheet panel available, as shown in the photo) - Stop system at the bottom with 9 plug-in pins and at the side with 7 plug-in pins for dimensionally accurate elements. - Tilting mechanism for the assembly station using 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated into the frame area of the assembly station. - The electrical control cabinet is also securely installed beneath the assembly station. - Operation of all functions via control pendant. - Compressed air connection and socket installed at both stationary ends, and on the station’s lengthwise side, 2 sockets and 2 compressed air connections are provided for attaching hand tools. - The stations are built on a modular principle, making it possible to expand with a receiver station, forming a complete turnover station, either immediately or later. A turnover station can be seen in Photo 3. - Additional options: assembly table without tilting function, perforated sheet panels, other working dimensions upon request Working area: - Max. element size (W x H): 12,000 x 3,800 mm - Min. element size (W x H): 1,000 x 100 mm - Clamping cylinder stroke: 320 mm - Stop/plug-in pin height: 120 mm - Working height: approx. 700 mm Dkjdpfxswv Tqbj Aflsg - Color: RAL 7035 light grey

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. Dkodpfx Afjg U Uv Rsleg With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour Dodpox A U Ncefx Aflskg – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.