Okvir Za Mrežo nakup rabljenega (84.792)

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Ruchser roller conveyor for windows with 90° rotation device left/right, length 4400 mm. Giodpfolpcc Ijx Af Sjr Electrically driven accumulation rollers with two parallel conveyor sections, pneumatically tiltable from vertical to 7° outward on the outside and 7° inward on the inside. Conveyor sections are 1900 mm high with rubber roller strips. Between the rubber strips, 2 mm deep stainless steel sheets serve as sliding surfaces for clip holders. Infeed and outfeed equipped with edge protection rollers (up to 3000 mm high) as rubber rollers. Infeed conveyor: 2000 mm; outfeed conveyor: 4000 mm, both with driven accumulation rollers. Control and operator panel mounted on a freely adjustable stand.

Stanje: rabljeno, Leto izdelave: 1959, Funkcionalnost: popolnoma funkcionalen, Brusilni stroj za ostrenje tračnih žag. Ogled je možen. Gedpfex Tak Nox Af Seir

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit Godpfxsqwycls Af Ssir X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: dober (rabljeno), Tehnični podatki o profilih okvirja: Regalni sistem: SSI Schäfer Tip: PR 600 Vključeno v dobavo: 01x profil okvirja, novo blago Barva materiala: sendzimir pocinkano Tip stojala: P73 Mere profila: 75 x 75 x 2,0 mm Višina: 10.694 mm Vaši kontaktne osebe pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Gedjx Dil Uepfx Af Ssir Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Prevoz ali pošiljanje izdelka po želji je povezano z dodatnimi stroški, ki jih lahko povprašate pri nas glede na kraj dostave ali obseg dostave.

Stanje: novo, Technical data for the base plate: Racking system: Nedcon Type: NS Year of manufacture: 2024 -new- Gjdpfx Afjrfdale Seir IMMEDIATELY AVAILABLE Included in delivery: 01x base plate, new Material colour: RAL 5019 Capri blue Material thickness: approx. 3.50 mm Suitable for frame profile width: 100 mm Total width: approx. 200 mm Total depth: approx. 93 mm Total height: approx. 43 mm Hole spacing: approx. 145 mm Hole diameter: approx. 15 mm Weight per piece: approx. 0.663 kg General information about this item: This item is only available for collection. Should you require transport or shipping of this item, additional costs will apply. The exact charges can be requested from us depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), V dobavo je vključeno: 01x zaščita za steber, rabljena Barva materiala: rumena - lakirana Skupna višina: 1.190 mm Skupna širina: 122 mm Notranja širina: 110 mm Primerno za profil okvirja: 110 mm Skupna globina: pribl. 60 mm Debelina materiala: 6,00 mm Premer izvrtine: 13 mm Razmak med izvrtinami: 650 mm Teža | kos: pribl. 12,69 kg Število izvrtin: 02 kosa Godpfx Ajw Ngzfof Ssir Vključno s pritrditvenim materialom, ki vsebuje: 02x šesterokotni vijak M10x35 mm 02x šesterokotna matica M10 04x podložka M10 Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Morebiten prevoz oz. pošiljanje tega artikla je povezano z dodatnimi stroški, ki jih je mogoče posebej preveriti glede na kraj in obseg dobave.

Stanje: skoraj kot novo (rabljeno), V obsegu dobave je: 01x zaščitnik stebra, II. izbira (novo blago) Proizvajalec: SSI Schäfer Primerno za tip okvirnega profila: P213, P215, P217 Barva materiala: rumena Skupna višina: 1.000 mm Skupna širina: 130 mm Notranja širina: 122 mm Primerno za profil okvirja: 120 mm Skupna globina: cca 65 mm Dimenzija kraka: 75 x 75 mm Debelina materiala: 4,00 mm Višina odbijača: 50 mm Premer izvrtine: 9 mm Razmak med izvrtinami: 250|300 mm Gijdpfjw I Dmpox Af Sjr Teža / kos: cca 7,97 kg Število izvrtin: 08 kosov Vključno s pritrdilnim materialom, ki vsebuje: 08x šestrobo vijak M8x30 mm 08x šestroba matica M8 16x podložka M8 Splošne informacije o izdelku: Izdelek je na voljo samo za osebni prevzem. Vsak dodatni prevoz oz. pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih je mogoče individualno preveriti glede na kraj dostave oz. obseg dobave.

Stanje: kot nova (razstavni stroj), Technical specifications for base plate: Racking system: Nedcon Type: NS Year of manufacture: 2024 - new product - IMMEDIATELY AVAILABLE Gsdorfwyyjpfx Af Soir Scope of delivery includes: 01x base plate, new Material colour: RAL 5019 Capri blue Material thickness: approx. 5.00 mm Suitable for frame profile width: 120 mm Total width: approx. 220 mm Total depth: approx. 94 mm Total height: approx. 43 mm Hole spacing: approx. 180 mm Hole diameter: approx. 20 mm Weight/piece: approx. 1.020 kg General information about the item: This item is only available for collection. Should you require transportation or shipping of this item, this will involve additional costs, which can be individually quoted by us depending on delivery location and order volume.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, GANNOMAT "JUNIOR 323" Gijdsxdttispfx Af Sjr FRAME DOWEL AND MORTISE BORING MACHINE Completely in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3–26 mm. Including collets Ø 10 / 13 / 16 / 20 mm - Motor 1.5 kW, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm increments, featuring: - Central detent and transverse adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be repositioned from left to right) 2 flip stops - Lowerable mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, diameter 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swiveling (left and right) Drilling head mount 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Undercarriage with 4 wheels for easy movement of the machine Availability: Short term – immediately –

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Gjdpfx Asg U Uv Ref Soir Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Raztezni element okvirja (WS15) HOLZ-HER rabljen- POZOR: cena za komplet 4 kosov! Napetostni pokrov tip O, Napetje na konzoli s preklopnim stikalom, Odpiranje / zapiranje s preklopnim stikalom ----- Tehnični podatki ----- Razpon vpenjanja: 40 - 115 mm Gijdpfx Afsvtrk Ae Ser

Stanje: rabljeno, Edge sanding machine LÖWER RSM 280 SX -used- Frame sanding machine Sanding shoe, Oscillation, Gisdpju R Tbhsfx Af Sjr Frame sanding device, Feed belt, Belt cleaning system ----- Technical Data ----- Sanding width: 190 mm, Max. workpiece thickness: 120 mm, Feed speeds: 6, 11, 16 m/min, Motor: 5.5 kW, Weight: 550 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Gijdpfx Aox A U Ncef Sor Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: dober (rabljeno), 7x pallet transport racks, Lützenkirchen – used - : Gijdpfx Aew Acruef Sor Price per unit: €395 (net), dismantled, packed, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Type: / Year of manufacture: not specified Load capacity: not specified Quantity: 7 Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln

Stanje: novo, Leto izdelave: 2024, Conveyor belt reeling machine. A device for winding belts used in conveyor systems. We are a manufacturer of belt winding machines. We design and produce machines tailored to our customers' requirements. Model Z45-20 with a load capacity of 20,000 kg and a winding diameter of 4,500 mm. Model R32-10 with a load capacity of 10,000 kg and a winding diameter of 3,200 mm. We can also manufacture machines with alternative specifications. Infinitely variable speed control, adjustable winding diameter, programmable winding length. We also develop and produce pneumatically operated folding bearings. Gedpfx Afetzbw Rs Soir

Leto izdelave: 2022, stanje: novo, Vretenasta žaga za natančen razrez manjših elementov, namenjena proizvodnji okvirjev za čebelje sate – Moč: 11 kW – Premer vretena: fi 70 mm Gsdpfxjh Hxycj Af Soir – Število žaginih listov: 10 – Premer žaginega lista: 210 mm – Minimalna dolžina obdelovanca: 100 mm – Največja višina: 40 mm – Hitrost podajanja: 4–8 m/min – Sistemski nosilec žaginih listov za hitro menjavo

Leto izdelave: 2022, stanje: novo, - Moč 1,5/2,3 kW - Tlak zraka 6 barov - Število vrtalnih glav 6 - Dolžina obdelovanca 100–480 mm - Zmogljivost proizvodnje 500–1000 kosov/uro Gedpeh Hxztofx Af Sjir - Možna opcija: dodatek žage

Stanje: novo, Leto izdelave: 2023, JS-BSTR 350 ist eine doppelseitige Fräsmaschine zur Profilierung der Seitenteile am Bienenrähmchen. Ausgestattet mit einem Vorschubmagazin und drei Frässpindeln. Motorleistung: 3 x 1,5 kW, 1 x 0,75 kW. Minimale Werkstücklänge: 100 mm, maximale Werkstücklänge: 320 mm. Einstellbare Arbeitsbreite: 35–38 mm. Produktionskapazität: 500–1000 Stück pro Stunde. Godpeh Hxw Nefx Af Ssir

Stanje: zelo dobro (rabljeno), Here we offer you a TOX insertion press, model TOX-C C-frame press. TOX Pressotechnik Insertion Press TOX-C C-Frame Press Pneumo-hydraulic manual workstation with process monitoring for pressing in functional elements. Technical Data: - Press type: EMB 030.068.A.001 - Drive: KWE3O.0O.17O.10H - Pneumatic connection: G3/4'' - Compressed air treatment: filtered and dried compressed air, max. particle size 40 µm - Air pressure during operation: Pmin. = 3.0 bar, Pmax. = 6.0 bar - Pressing force: 170 kN - Total stroke / power stroke: 170 mm / 10 mm - Control: STE 326-366-3/4"-90-230V/AC, special version, complete - Electrical connection: 90-230V/AC - Ambient temperature operation: Tmin. = 10°C, Tmax. = 60°C - TOX press monitoring: EPW 500FP force / displacement measurement - Spring-return device: ZHE for TOX press - Insertion clearances: width 1917.5 mm, height 2506 mm, depth 1917.5 mm - Safety fence system: Leuze B20/B21 light curtain - Press-in tool: see images 15 to 18 - Press-in bushing (picture 17): 24.5 mm diameter - Scope of application: insertion - Weight: 2200 kg - Model: EMB 030.068.A.001 - Condition: used - Scope of delivery: (see pictures) Gsdpfehhil Tex Af Seir (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Leto izdelave: 1997, stanje: rabljeno, machine for gluing and stapling picture frames Gijdpfx Afsdbycae Ser

Leto izdelave: 1994, stanje: dober (rabljeno), Rivo bandsaw sharpening machine Model GA 250 Gedpfx Aspl D Hxsf Sjir

Stanje: rabljeno, Leto izdelave: 2002, Frame material: stainless steel/plastic/aluminum Height: 2800 mm Length: 14,800 mm Depth: 1,800 mm Weight: approx. 3,580 kg Condition: good/used Gijdpfxew Dpx Dj Af Sjr

Stanje: dober (rabljeno), Leto izdelave: 1995, Vklj. orodje za upogibanje Giodpfxoxm Tn Ej Af Sjr Naprava lahko: aluminij, Chromatec/Niro. Primerno za forme in modele. 4-prekatni profilni magazin. Skupna dolžina: 12000 mm Maksimalna višina: 2760 mm Globina: cca 2000 mm Teža: cca 2500 kg

Leto izdelave: 1995, stanje: dober (rabljeno), The bender is capable of bending aluminium and plastic. Total length: approx. 11,500 mm Depth: 1,600 mm. Godpfsrif U Eox Af Sjir

Stanje: rabljeno, Rabljeni stroj Stanje: glede na starost Za učinkovito vrtanje moznic v vzdolžne in prečne rezkane dele pri okvirnih vratih, oblogah vrat delih predalov prečk vseh vrst Motor s 3 vreteni Razdalja med vreteni 25/25 mm Maksimalni hod 80 mm Motor 1,5 KM Podporna miza 260 x 130 mm Godpfx Aew Nabxsf Seir Nastavitev višine 5-40 mm po merilu Z zamenljivim zložljivim prislonom Krmiljenje z nožnim ventilom Severni Ren-Vestfalija