Naprave Za Briketiranje nakup rabljenega (119.674)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 1170 x 1510 mm Weight: 650 kg Total power requirement: 6 kW Briquetting press BP-60 - Briquette diameter: 60 mm - Hydraulic motor: 5.5 kW Csdpfx Asvz Eqfjgtsrh - Throughput: 15–70 kg/h - Cylindrical material hopper, Ø 1000 mm - 7 cycles/min - Maximum briquette length: 60 mm - Pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touch screen - Operating hours counter - Voltage: 400 V / 50 Hz - Level sensor for automatic shut-off - Chrome-plated tongs - Dimensions: L = 1700, W = 1170, H = 1510 mm - Weight: 650 kg

Stanje: rabljeno, Weight: 190 kg Load capacity: 600 kg Crodpfx Aevwggyogtjh Used, in good condition Manufacturer: Aero-Lift Model: Aero 600/2L-P Pump: 2.2 kW Suction volume: 150 m³/h Adjustable suction beam: from 810 mm to 2000 mm Suction plates: 2 units Suction plate size: 400 mm x 800 mm Load capacity: approx. 600 kg Weight: approx. 190 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition Without warranty or guarantee

Stanje: pripravljen za uporabo (rabljen), Briquetting machine, briquette press by SPANEX Transport dimensions: – Width: 190 cm – Depth: 80 cm – Height: 125 cm 7.5 kW motor Briquette diameter: 40 mm Crjdjv Dmvbopfx Agtjh

Stanje: pripravljen za uporabo (rabljen), engine power 5.5 kW Crjdpfswd R Aqex Agtjh diameter of briquette 80 mm sawdust level sensor operating hours 6,363 h hopper diameter 1,200 mm adjustable feed quantity year of manufacture 1996 power supply 380 V

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, The two devices with capacities of 10t and 5t were acquired for turning steel tools or parts thereof, but were rarely used and have been in storage for some time now. Credpfx Agevx Sktetjh

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D5830, obratovalne ure: 381 h, 2016 Rowa Vmax pharmacy robot The system is in excellent condition. It has seen very little use, as our wide range of packaging options is not suitable for this type of storage system. Credpswccnpefx Agteh The system is fully operational and is in top condition with very low operating hours. The last maintenance was carried out today, and there is no maintenance backlog. Further information available upon request.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2000 x 1600 x 1500 mm Weight: 1550 kg Total power requirement: 11.5 kW Briquette Press BP-200 PRO Crsdpfsvz Efvjx Agteh - Briquette diameter: 80 mm - Hydraulic motor: 11.0 kW - Throughput: 90/250 kg/h - 7 cycles/min. at full capacity - Probe for material detection (automatic) - Maximum briquette length per impulse: 70 mm - Dual pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touchscreen - Operating hours counter - Screw channel mixer for material feed - Material hopper (L x W x H): 1880 x 1880 x 1030 mm - Voltage: 400 V / 50 Hz - Dimensions: L = 2000 mm, W = 1600 mm, H = 1500 mm - Weight: 1550 kg

Stanje: novo, Stock clearance sale - New - Briquetting Press GP Genius I/40 Briquette diameter: 40 mm Pressing capacity: depending on material Hopper opening: 900 x 900 mm Hopper height: 1025 mm Standard hopper volume: approx. 0.6 m³ Motor power: 4.10 kW Connection rating: 400 V +/- 5% / 50 Hz Control cabinet: electronically controlled via PLC Hydraulic unit: with approx. 50 l tank for hydraulic oil Paintwork: RAL 7016 + 5017 Overall dimensions: L = 1,600 mm, W = 1,250 mm, H = 1,300 mm Weight: approx. 550 kg incl.: - Automatic briquette length adjustment: automatic regulation of length according to material density - Gear motor with feed screw for screw pre-compaction - Permanent agitator - Connection piece for transport pipe - Chrome-plated tongs - Manual control of all cylinders - Automatic end position for all cylinders - Safety switch for oil temperature - Automatic shutdown in case of bridging in the container and interruption of press cycle due to foreign objects - CE compliant - Rotary encoder automatic ON/OFF - Oil temperature monitor - 2 transport pipe bends 90°, radius 500 No. 001 003 Crsdpovwfzcofx Agtjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.850 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 14.000 kg, kapaciteta rezervoarja za olje: 2.000 l, obratovalni tlak: 300 letvica, moč: 0,09 kW (0,12 KM), TECHNICAL DETAILS Codevgb D Sjpfx Agterh Briquette size: approx. 270 x 100 x 100 mm Total weight: 14,000 kg Oil tank capacity: 2,000 l Operating pressure: 300 bar Power: 0.09 kW (0.12 hp) Motor voltage: 380 V EQUIPMENT - Feed hopper for smooth production - Reinforced concrete silo with hydraulic walking floor - Alko mobile deduster, specially adapted for the press, prevents dust generation and protects the machine from rapid contamination - Emergency stop switch for increased safety.

Stanje: zelo dobro (rabljeno), briquette diameter 65 mm sawdust level probe in the hopper hopper diameter 1000 mm Crjdpfx Agevx Anpstjh year of manufacture 2001 power supply 380 V

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 2.100 h, Funkcionalnost: popolnoma funkcionalen, Wood briquettes, rectangular, 27 x 10 x 10 cm Output: 900 kg/h Motor power: 90 kW Only 2,100 operating hours Including feed hopper for smooth operation Csdpfjwc D E Ajx Agtsrh With mobile extraction unit by AL-KO, incl. screw conveyor

Stanje: rabljeno, Tool holder, milling chuck, collet chuck, collet chuck holder, clamping chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck SK45 with accessories -Type: NCGFLK 160-AD+B45 -Quantity: 8 clamping chucks available Crjdpfx Ashupvbjgteh -Price: per piece -Box dimensions: 270/195/H110 mm -Weight: 3.9 kg/piece.

Stanje: dober (rabljeno), Leto izdelave: 1988, Shelving Racks, SSI Schäfer R7000, at least 8m high, 200kg per shelf, shelves 1m x 0.50m – used – : Price: only €69,500 (net), ex site, dismantled, packed, and loaded! Manufacturer: SSI Schäfer Csdpfx Agstt N T Rstorh Model: R7000 Year of manufacture: 1988 Shelf load: 200kg Frame height: approx. 8m (possibly even 8.98m) Shelves: ZB 4523 – 200kg Load capacity: 200kg per shelf Shelf dimensions: Shelf height: approx. 4cm Width: approx. 1m Depth: 0.50m Approx. 16 shelves per bay Total shelves: approx. 5,952 units Total frames: approx. 384 units Largely equipped with push-through protection! Condition: good (the material comes from an installation with stacker cranes, so there are no damages) Available: approx. from August 2025 Location: Cologne The conveyor technology and stacker cranes shown in the pictures can also be purchased for an additional cost if desired!

Stanje: novo, Leto izdelave: 2017, Arcotec FTS 4005 DR gas flame treatment system, year of manufacture: KW42/2017. The machine is new and unused, with CE marking. Operating voltage: 400V, power: 7 kW. Gas type: preset for propane, but natural gas can also be used. Equipped with 4x MB3-500S/2E burners. Suitable for treating metal sheets. The gas flame treatment system is designed exclusively for the thermal pre-treatment of metal sheet surfaces to improve the adhesion of printing inks, lacquers, adhesives, foam, etc. The machine originally cost over €200,000! Cjdpod Rik Aofx Agterh

Leto izdelave: 2023, Stanje: novo, SEMX compact concrete batching plants are designed for limited space conditions and easy overseas transport. The SEMIX Kompakt 60 fits into two containers and can be fully assembled within 3 days. The SEMIX Kompakt 60 is equipped with concrete mixers with a capacity of 1500/1000 liters, available as single-shaft or planetary mixers. Depending on the silicon content in the concrete mix, SEMIX concrete mixers use NiHard4 or Hardox 450 wear parts. Crjdpfx Asga D I Rjgtoh All SEMIX aggregate storage bins have a trapezoidal shape for increased stability. The robust steel construction ensures a long service life. Aggregates are weighed in the weighing conveyor, which delivers the aggregates to the transfer mechanism. SEMIX compact concrete batching plants offer a variety of aggregate transfer mechanisms. Even in compact batching plants, users can choose either a skip hoist mechanism or a transfer conveyor for aggregate transfer. All SEMIX concrete batching plants are controlled by a SCADA system with integrated Schneider PLC. Users can track all materials used and integrate their CRM system. For service purposes, the SEMIX engineering team can access the automation system online.

Stanje: rabljeno, Tool holder, milling holder, collet chuck holder, milling tool, adapter, clamping unit, toolholder, -Manufacturer: Sandvik Coromant milling holder SK45 -Type: 390.140-45 50 027 -Dimensions: Ø83 x 140 mm -Weight: 1.7 kg Crodjhupu Tjpfx Agteh

Stanje: dober (rabljeno), Leto izdelave: 2020, Pallet racking, Stow, height approx. 2.70m, beam length 3.60m, 450 - 600kg per pallet, approx. 537 or 716 pallet spaces, - used - : Price ex location: €9,995 (net), dismantled, packed, and loaded! Csdpfxowankke Agterh Manufacturer: Stow Model: Stow12 Year of manufacture: 2020 Frame height: approx. 2.70m Frame depth: approx. 1m Type: PLFB 12 Number of frames: 87 pcs Beam length: 3.60m Number of beams: 191 pcs Type: PNB0413 / 130mm Number of levels: 1 Knee height: up to 2,100mm Max. bay load: 1,800kg Max. shelf load: 1,800kg = 600kg / pallet with 3 pallets stored across, or 450kg with pallet deep storage and 4 pallets per level Incl. existing wire mesh decking for all levels (light-duty version) Incl. impact protection guards Condition: good Available: immediately Location: 21509 Glinde

Leto izdelave: 2023, Stanje: novo, SEMIX M160S4 offers the highest worldwide capacity among mobile concrete batching plants. Crjdpfx Agegazb Dsteh The SEMIX Mobile 160S4 is equipped with twin-shaft concrete mixers with a capacity of 6,000/4,000 litres. Depending on the silica content in the concrete mix, SEMIX mixers use NiHard4 or Hardox 450 wear parts. Aggregate storage bins can be loaded using wheel loaders over a single ramp. The aggregates are weighed on the weighing conveyor, which then transfers the materials onto the discharge conveyor. Two separate conveyor belts ensure weighing accuracy and result in higher concrete output. All SEMIX aggregate storage bins feature a trapezoidal design for added stability. All SEMIX concrete batching plants are controlled by a SCADA system integrated with Schneider PLC. Users can monitor all materials used and integrate this information into their CRM systems. For service purposes, the SEMIX engineering team can access the automation system online.

Stanje: rabljeno, Tool holder, milling tool holder, collet chuck, collet holder, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, SK50 milling collet chuck with accessories -Type: NCGFLK 160-AD+B50 -Quantity: 14x chucks available Crodpfx Agshupvfsteh -Price: per piece -Box dimensions: 270/195/H110 mm -Weight: 4.9 kg/pc.

Stanje: rabljeno, Tool holder, milling holder, milling tool Credpsb E S Npjfx Agteh - Quantity: 4x SK40 holders - 1x Ø: 16 x 19 mm - 1x Ø: 16 x 25 mm - 1x Ø: 27 x 25 mm - 1x drill chuck - Only sold as a complete set - Weight: 6 kg

Stanje: rabljeno, Tool holder, milling holder, collet chuck, milling tool, adapter, clamping unit, tool holder, Crjdpshuf Izjfx Agtoh -Manufacturer: Sandvik Coromant / Komet, 60 units of holders / clamping units SK50 -Various types: see photos, additional pictures available upon request -Type/quantity: see photo parts list -Price/sale: as a complete package -Transport dimensions: 600/500/H500 mm -Total weight: 210 kg

Stanje: rabljeno, Tool holder, milling tool holder, milling tool - Quantity: 21x SK50 holders Crjdpfx Aoc Innzogtoh - Various models - Drill chuck, shell mill arbor, reduction sleeves, face mill, shell end mill, spindle tool - Sale: only as a complete lot - Weight: 82 kg

Stanje: rabljeno, Toolholder, tool clamp, milling arbor, milling tool, chuck, milling tool holder -Manufacturer: Eroglu, milling tool holder with coolant channel, original packaging Crodpjr Dgi Tofx Agtjh -Type: HSK 63-12-80-K .: A63.04.12.K -Transport dimensions: 470/100/H95 mm -Weight: 1.2 kg

Stanje: rabljeno, Tool holder, milling holder, milling tool Cedpfspgkwgjx Agtsrh - Quantity: 515x SK50 tool holders with tool holder from KOMET GEWEFA and others - Holder standard: ISO 7388-1 SK50 - Pull stud standard: ISO 7388-3 - Various designs/executions - Drill chuck: hydraulic chucks, reduction sleeves, face mill cutter heads, shell end mills, spindle tools - Suitable for tool changers - Scope of delivery exactly as shown in the pictures - Dimensions: 10x Euro pallets - Weight: 2464 kg

Stanje: rabljeno, Workstation equipment, swivel jib for tool holder, monorail ceiling system for tool holder, assembly arm, assembly jib. - Load capacity: 40 kg - Outreach: 5150 mm - Total height: mm (value not specified) - Swivel range: 180° - Pneumatically braked: in rotation/translation direction - Power connection/pneumatic connection: at the storage position - Quantity: 1x assembly arm available - Price: per unit - Transport dimensions: 800/5500/H1200 mm - Net weight: 82 kg (jib 56 kg, trolley 26 kg) Crjdpfxocbtv Uo Agtsh