Stroj za vrtanje CNC

Robland BM 3000 II

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Csdpfx Aefi Tg Hsgtjha Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Chsdpfx Agoh Akm Tstsa

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Cedsvwbp Ajpfx Agteha

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Brandt KDF 1440 Edition Only 1,700 operating hours – very good condition – can also be supplied with preheating station XES 200 Autark (+ €4,500) SUMMARY OF UNIT CONFIGURATION: JOINTING CUTTER UNIT 2 x 2.2 kW 200 Hz GLUING UNIT QA 65 N END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.18 kW PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 OPPOSING CUTTERS PNEUMATIC 2-POINT ADJUSTMENT CONTOUR MILLING UNIT 1 x 0.35 kW WD 60; also suitable for subfloor panels PNEUM. 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Upper pressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spraying unit for workpieces Automatic edge feed Multiple roller sensing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Min. workpiece width: – For workpiece thickness 8-22mm: 70 mm* – For workpiece thickness 23-40mm: 120 mm* – For workpiece thickness 41-60mm: 150 mm* *Depending on workpiece length – Workpiece projection: 38 mm – Workpiece thickness: 8 – 60 mm – Edge height max. = workpiece height + 6 mm – Edge material, coil: 0.4 – 3 mm Codpfx Ajzb Iggegtjha – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material, strips: 0.4 – 8 mm – Max. edge cross-section: – For strips: 360 mm² – Feed speed: 8 – 14 m/min – Max. feed speed with contour milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Full description: see PDF

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC obdelovalni center Homag Weeke Optimat BHC Venture 3, letnik 2004, na prodaj! Chodjx Ey H Ispfx Agtja

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cedpfx Aouc Idxjgtjha Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Leto izdelave: 2024, stanje: novo, Voziček za prevoz in shranjevanje profilov v navpičnem položaju COMALL CARR 300 Q, nov Tehnične specifikacije: - 10 prekatov z delovno velikostjo 128 mm - Stične površine prevlečene z neopraskajočim in udarnoodpornim plastičnim materialom - 4 kolesa Ø 125 mm, od tega 2 z zavoro Chedpfxjf Nk H Ho Agtoa - Roke nastavljive v 5 različnih položajev - Podporna miza prevlečena z gumo - Nosilnost: 650 kg

Stanje: novo, Leto izdelave: 2024, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Cedov Htkdepfx Agtsha Load capacity 300 kg Machine weight approx. 220 kg Description: - Sturdy support frame for worktops - Easy, back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors – 2 with locking brakes - Beech multiplex board 2,000 x 1,000 x 30 mm - 5-year warranty

Stanje: novo, Table size: 2500 x 780 mm Motor power: 7.5 kW Spindle diameter: as required Speed range: 1,500 – 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L --- 4-axis control: spindle height, tilting, parallel adjustment of the fence, and adjustment of the motorized table insert, incl. upper control panel with automatic star-delta starting for the spindle motor. Touchscreen, tool management, and program control based on Windows. Fence including controlled parallel adjustment (1st axis), manual adjustment with digital readout for the front fence jaw, electric swing-away device for the entire fence, quick-release lever for fixation, aluminum fence jaws, and pressure device. Controlled electro-motorized spindle height adjustment (2nd axis). Controlled electro-motorized spindle tilting adjustment (3rd axis): -45° to +45°. Table insert adjustable according to cutter diameter (instead of table insert rings). The table insert is motorized (4th axis). Milling speeds: 1500/3000/4500/6000/8000/10000 rpm (displayed on touchscreen). Electrics and safety devices in accordance with CE standards. Table dimensions: 1,200 x 780 mm. Cjdjxpi D Iepfx Agtsha Max. tool size under table: d = 320 mm, H = 50 mm. Motor: 7.5 kW / 10 HP / 50 Hz. Version "L" with table extension on both sides and pull-out workpiece support. With emergency stop button. Reversible operation (left/right) according to CE standards. Curved fence for moulding. Option at extra cost: 4-roller power feed Type VSA 2048 L Consistent feed speed without power loss Reversible operation (left/right) Includes stand, can be individually swiveled and adjusted for horizontal and vertical use Eight speeds available, speed selection via switch and change gear Extra cost: 1,149.00 Euro Shipping costs, including installation and 4 hours of instruction: Extra cost: 1,400.00 Euro (technical data as per manufacturer - subject to change without notice)

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Codpew I U Drofx Agteha Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Location: Hochheim