Mobilni Plate Žaga nakup rabljenega (17.357)

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrags Ursprungsland Türkei Preis 39400 € Leasingrate 628.39 € Sonderpreis 32900 € Biegelänge 2050 mm Redpfxeyb S Ars Ag Tep Max. Biegekapazität - Baustahl 10 mm Max. Blechstärke ohne Anbiegung - Baustahl 10 mm Max. Blechstärke mit Anbiegung - Baustahl 8 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze 10 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwal 8 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalzen 8 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalz 6 mm Oberwalzendurchmesser 200 mm Unterwalzendurchmesser 200 mm Seitenwalzendurchmesser 180 mm Rollgeschwindigkeit 6 m/min Länge 3850 mm Breite 1350 mm Höhe 1290 mm Gewicht 3750 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Rjdoyb Szbepfx Ag Tjp Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Rodeyb Sy Rspfx Ag Tjp Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2025, Stanje novo Leto izdelave 2025 Številka zaloge 090120 Dobavni rok takoj, vmesna prodaja mogoča Država izvora Turčija Cena 7100 € Leasing rata 137,03 € Bestseller 1 Na zalogi 1 Upogibna dolžina 1050 mm Maks. upogibna zmogljivost – konstrukcijsko jeklo 3 mm Premer zgornjega valja 90 mm Hitrost valjanja 6 m/min Moč motorja 1,1 kW Dolžina 1630 mm Širina 700 mm Višina 1200 mm Teža 480 kg 3 valji Asimetrična razporeditev valjev 2 pogonska valja z zavoro Pogonski zadnji valji z ročnim kolesom Žlebovi za vstavljanje žice na spodnjem in zadnjem valju KALJENI VALJI Zgornji valj izmetljiv Desno/levo smer z dvojnim nožnim stikalom Naprava za konično valjanje Rodpfxswira Is Ag Top Navodila za uporabo v NEMŠČINI

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Rjdpfx Agjyb Szus Tjp Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrags Ursprungsland Türkei Preis 26300 € Leasingrate 502,33 € Biegelänge 2050 mm Rodpfx Aoyb Sy Djg Top Max. Biegekapazität - Baustahl 4 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze 4 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwal 3 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalzen 3 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalz 2 mm Oberwalzendurchmesser 130 mm Unterwalzendurchmesser 130 mm Seitenwalzendurchmesser 130 mm Rollgeschwindigkeit 5 m/min Motorleistung 2,2 + 1,1 kW Länge 3800 mm Breite 1150 mm Höhe 1110 mm Gewicht 2450 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država porekla Turčija Cena 25.200 € Leasing rata 481,32 € Dolžina upogibanja 1050 mm Maks. zmožnost upogibanja – konstrukcijsko jeklo 2,5 mm Maks. debelina pločevine brez predupogibanja – konstrukcijsko jeklo 2,5 mm Maks. debelina pločevine s predupogibanjem – konstrukcijsko jeklo 2 mm Premer zgornjega valja 90 mm Hitrost valjanja 4,5 m/min Moč motorja 2,2 kW Dolžina 2250 mm Širina 1000 mm Višina 1500 mm Teža 900 kg ZA OKROGLE IN ELLIPTIČNE DELE V SERIJSKI PROIZVODNJI (ČAS CIKLA MOŽEN TUDI DO 20 S) 4 valji NC krmiljenje z zaslonom na dotik Pogonski zgornji valj s hidromotorjem in planetnim prenosom Hidravlične preklopne ležaje Mobilni upravljalni pult Kaljeni valji Redpfeyb Syqsx Ag Tep Navodila za uporabo v NEMŠČINI DODATNA OPREMA: Dovajalna miza cena po dogovoru

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Rodpfx Agsyb Syks Tsp Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 2002, Condition: used Year of manufacture: 2002 Stock number: 090129 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €27,800 In stock: 1 unit Cutting length: 3,100 mm Max. sheet thickness (mild steel): 10 mm Frame throat (side stand): 350 mm Strokes per minute: 10 Cutting angle: 1.5° Backgauge: 1,000 mm Motor power: 22 kW Length: 3,800 mm Total width incl. support arm and rear safety guard: 3,600 mm Height: 2,000 mm Weight: 9,800 kg Swing cut design NC preselection controller ENC100 for backgauge, cutting length, and piece count Motorized backgauge up to 1,000 mm with ball screw, foldable Hydraulic hold-downs positioned close to the cutting edge Foot switch Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard 1,000 mm 1 side gauge 1,500 mm with scale, T-slot, and flip stop 2 sheet support arms 1,000 mm with T-slot Rsdox Urrhspfx Ag Tsp Oil filling included Light barriers at rear of machine Operating manual in GERMAN including CE declaration of conformity

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090132 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €47,500 Leasing rate: €798.38 In stock: 1 Special price: €41,800 Cutting length: 3100 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Side frame throat: 50 mm Strokes per minute: 15 Cutting angle: 1.5° Rjdpfx Aowiqyyog Tep Number of hold-downs: 16 Hold-down pressure: 14 t Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Hydraulic tank: 200 l Support arms: 2 pcs Table height: 865 mm Table width: 500 mm Table length: 3515 mm Overall length: 4110 mm Width: 2200 mm Total width with support arm and rear guard: 3700 mm Height: 2100 mm Weight: 7300 kg Swing beam shear design NC pre-selection control D-Touch 7 with touch screen for backgauge, cutting length, piece count, and USB interface Motorized backgauge, adjustable up to 1,000 mm with ball screws, can be lifted up Clearly arranged operator panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting line Foot pedal Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Piece counter Single and continuous stroke Folding finger guard 1,000 mm 1 side fence 1,500 mm with scale, T-slot, and cam stop 2 sheet support arms 1,000 mm with T-slot Easy blade change and re-sharpening Adjustable cutting length for economical processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Filled with oil Light barriers at the rear of the machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE standards WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition new Delivery time approx. 14 - 16 weeks from order Country of origin Turkey Price €11,100 Leasing rate €213.12 Saw frame pivoting frame Saw band dimensions 3660x27x0.9 mm Infinitely variable band speed 20-100 m/min Redpfxjwirhfo Ag Tep Cutting capacity 0° round 320 mm Cutting capacity 0° square 300 mm Cutting capacity 0° flat 320x300 mm Working height 640 mm Hydraulic motor 0.37 kW Motor 2.2 kW Coolant pump motor 0.12 kW Length 1900 mm Width 850 mm Height 1300 mm Weight 770 kg Roller feed with manually adjustable stop with limit switch Chip brush Control panel Height adjustment via sensor bar with limit switch Hydromechanical band tension Hydraulic vise Coolant pump Saw band Safety switch 1.2 meter roller conveyor Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw bands on request

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €27,600 Leasing rate: €527.16 Saw frame: double-column guide Saw blade dimensions: 5750 x 41 x 1.3 mm Blade speed, stepless: 15 - 120 m/min Cutting capacity 0° round: 460 mm Cutting capacity 0° square: 460 mm Cutting capacity 0° flat: 520 x 460 mm Working height: 585 mm Hydraulic motor: 0.55 kW Motor: 4 kW Coolant pump motor: 0.12 kW Length: 3000 mm Width: 1200 mm Height: 1800 mm Weight: 1,650 kg Roller feed with manually adjustable stop with microswitch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tensioning Gearbox designed for heavy-duty use Coolant system Mechanical upper clamping Pressure adjustment Rjdpfxeynnhqe Ag Tsp Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €54,900 Leasing rate: €1,037.61 Saw frame with double column guide Saw blade dimensions: 5400 x 41 x 1.3 mm Infinitely variable blade speed: 20-100 m/min Cutting capacity at 0° round: 440 mm Cutting capacity at 0° square: 440 mm Rodpfx Ageynnhdj Top Cutting capacity at 0° flat: 610 x 440 mm Cutting capacity at 30° round: 440 mm, square: 440 mm Cutting capacity at 45° round: 430 mm, square: 430 mm Cutting capacity at 60° round: 320 mm, square: 260 mm Working height: 807.5 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 2850 mm Width: 2350 mm Height: 2000 mm Weight: 3600 kg NC control Double column linear guide 3° cutting angle Chip brush Control panel Hydraulic feed clamp Hydraulic vice Hydromechanical blade tensioning Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro-spray system Laser cutting line Roller conveyors and saw blades ALTERNATIVE: BMSO 440 CGS NC (with servo feed instead of hydraulic feed) €61,900

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €22,700 Leasing rate: €435.84 Saw frame: Double column guide Saw blade dimensions: 4800x34x1.1 mm Blade speed: stepless 20–100 m/min Rsdpfxoynng To Ag Tsp Cutting capacity 0° round: 380 mm Cutting capacity 0° square: 380 mm Cutting capacity 0° flat: 430x380 mm Working height: 590 mm Hydraulic motor: 0.55 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2900 mm Width: 950 mm Height: 1660 mm Weight: 1342 kg Chip brush Control panel Hydraulic vice Optical height adjustment Hydromechanical blade tensioning Inverter Mechanical upper clamping Material limiting chute Coolant pump Saw blade Safety switch Gearbox Pressure adjustment 1.2 meter roller conveyor Operating instructions in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €72,800 Leasing rate: €1,375.92 Saw frame: double column guide Saw band dimensions: 9500 x 54 x 1.6 mm Band speed, stepless: 20–100 m/min Cutting capacity at 0° (round): 1020 mm Cutting capacity at 0° (square): 1020 mm Cutting capacity at 0° (flat): 1020 x 1020 mm Cutting capacity at 45° (round): 675 mm, (square): 675 mm Working height: 535 mm Rsdsynng Hopfx Ag Tsp Hydraulic motor: 2.2 kW Main motor: 7.5 kW Coolant pump motor: 0.12 kW Length: 4500 mm Width: 1700 mm Height: 2750 mm Weight: 5860 kg Hydraulic vice Hydraulic blade tensioning Infinitely variable speed Linear guides Height adjustment via optical sensor automatic saw frame lift after end of cut automatic adjustment of the guide arm synchronised with hydraulic vice movement sensitive cutting pressure regulation Coolant pump Saw blade Chip brush Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Chip conveyor Rotary table for mitre cuts Roller conveyors and additional saw blades

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država izvora: Turčija Cena: 11.400 € Leasing rata: 218,88 € Dolžina upogibanja: 1050 mm Največja zmogljivost upogibanja – konstrukcijsko jeklo: 5 mm Rjdpfxoynngto Ag Tsp Premer zgornjega valja: 130 mm Hitrost valjanja: 3,5 m/min Moč motorja: 2,2 kW Dolžina: 2200 mm Širina: 750 mm Višina: 1000 mm Teža: 1200 kg 3 valji Asimetrična postavitev valjev – s predupogibanjem 2 pogonska valja preko zavornega motorja Ročna nastavitev stranskih valjev Zgornji valj izmenljivo nagibljiv naprej Delovanje naprej/nazaj Konusno valjanje s poševno postavitvijo zadnjega valja Premična komandna plošča Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJE: kaljeni valji motorizirana nastavitev stranskih valjev digitalni prikaz položaja stranskih valjev

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država izvora: Turčija Cena: 4.500 € Premer žaginega lista: 315 mm Dimenzije žaginega lista: 315x32x63 mm Hitrost žaginega lista: 45 / 90 obr/min Kapaciteta rezanja 0° okroglo: 105 mm / kvadratno Kapaciteta rezanja 45° desno okroglo: 90 mm / kvadratno Širina: 600 mm Rjdpfx Aeynngaeg Top Globina: 1000 mm Višina: 1400 mm Teža: 200 kg Pnevmatski primež Nizkonapetostno stikalo za zagon/zaustavitev v ročaju Kotni rezi 45 stopinj levo in 45 stopinj desno Deljeni primež (pritrjuje pred in za žaginim listom) Samocentrirni primež za optimalen položaj rezanja Veliko podnožje za visoko stabilnost Žagin list ni vključen

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov od naročila Država izvora: Turčija Cena: 2900 € Dolžina upogibanja: 1270 mm Maks. zmogljivost upogibanja (konstrukcijsko jeklo): 1,2 mm Premer zgornjega valja: 68 mm Moč motorja: 1,5 kW Dolžina: 1610 mm Širina: 700 mm Višina: 1160 mm Teža: 385 kg 3 valji Asimetrična postavitev valjev - s predhodnim upogibanjem Reže za žico pri spodnjem in zadnjem valju Rjdpfx Agjynndre Tjp Nastavitev spodnjega valja z osrednjo ročico – s prestavno ročno gonilo Podnožje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €58,000 Leasing rate: €1,096.20 Saw frame: Swivel frame Saw band dimensions: 3120 x 27 x 0.9 mm Band speed, stepless: 15 – 101 m/min Cutting capacity at 0°, round: 280 mm Cutting capacity at 0°, square: 240 mm Cutting capacity at 0°, flat: 310 x 240 mm Cutting capacity at 45°, round: 230 mm, square: 230 mm Cutting capacity at 60°, round: 140 mm, square: 140 mm Cutting capacity, -45°, round: 200 mm, square: 170 mm Min. remnant length: 240 mm Working height: 835 mm Hydraulic motor: 0.37 kW Main motor: 1.5 kW Coolant pump motor: 0.12 kW Feed motor torque: 1.95 Nm Torque of motor for automatic saw frame rotation: 1.95 Nm Rjdpfx Ageynncus Tsp Length: 5,150 mm Width: 3,200 mm Height: 1,950 mm Transport dimensions: 5,000 x 2,200 x 1,900 mm Weight: 2,150 kg CNC control with 7" touchscreen for the following functions: Feed length, quantity, and automatic saw frame rotation for mitre setting Automatic feed: 3,000 mm/stroke Variable cutting pressure Machine with stepless speed adjustment Coolant system Motorised swarf brush Chip conveyor Automatic saw band break monitoring Hydraulic clamping fixtures Recommended max. diameter of solid material in automatic mode: 150 mm Operating manual in German or English OPTIONS: Hydraulic bundle clamping device, micro-spray system, variable clamping pressure, 10" display, remote maintenance, roller conveyors, feed system and saw bands upon request.

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €11,640 Leasing rate: €223.49 Saw frame: pivoting frame Saw blade dimensions: 3270 x 27 x 0.9 mm Blade speed: 35/70 m/min Cutting capacity at 0° round: 300 mm Cutting capacity at 0° square: 240 mm Cutting capacity at 0° flat: 420 x 200 mm Redpfx Agjynm S Io Tsp Cutting capacity at 45° round: 240 mm, square: 230 mm Cutting capacity at 60° round: 170 mm, square: 170 mm Working height: 830 mm Length: 1,650 mm Width: 1,200 mm Height: 1,900 mm Weight: 400 kg Hydraulic vise Lowering and raising of the saw frame via hydraulic cylinder Quick lowering Automatic rapid lowering and raising, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Double safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; fast hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; quick raising of saw frame; stop of saw frame raise; vise opens OPTIONS: Adjustable clamping pressure for the vise (R1): €403.00 Roller conveyors and saw blades on request

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Redsynm Szepfx Ag Tep Država izvora: Italija Cena: 9080 € Leasing rata: 175,24 € Žagalni okvir: nihajni okvir Dimenzije žagalnega traku: 3270x27x0,9 mm Hitrost traku: 35/70 m/min Kapaciteta rezanja 0° okroglo: 300 mm Kapaciteta rezanja 0° kvadrat: 240 mm Kapaciteta rezanja 0° ploščato: 420x200 mm Kapaciteta rezanja 45° okroglo: 240 mm, kvadrat: 230 mm Kapaciteta rezanja 60° okroglo: 170 mm, kvadrat: 170 mm Delovna višina: 830 mm Dolžina: 1600 mm Širina: 1400 mm Višina: 1950 mm Teža: 356 kg Ročna vpenjalna glava s hitro vpenjalno ročico Spuščanje z lastno težo z nastavljivim dušilcem 2 hitrosti Naprava za hladilno sredstvo MOŽNOSTI: Valjčne steze in žagalni trakovi na zahtevo

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €14,110 Leasing rate: €270.91 Saw frame: swivel frame Saw blade dimensions: 3270 x 27 x 0.9 mm Rsdpfxsynm Sus Ag Top Blade speed: 35/70 m/min Cutting capacity at 0° (round): 280 mm Cutting capacity at 0° (square): 240 mm Cutting capacity at 0° (flat): 420 x 200 mm Cutting capacity at 45° (round): 260 mm, (square): 240 mm Cutting capacity at 60° (round): 170 mm, (square): 160 mm Cutting capacity at -45° (round): 200 mm, (square): 180 mm Working height: 830 mm Length: 1600 mm Width: 1600 mm Height: 1800 mm Weight: 488 kg Hydraulic vise Lowering and raising of the saw frame via hydraulic cylinder Fast lowering Automatic fast lowering and raising, controlled by sensor pin Adjustable cutting pressure according to material cross section and quality Double safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; fast hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; fast raising of the saw frame; stop raising the saw frame; vise opens OPTIONS: Roller conveyors and saw blades available on request

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €25,680 Leasing rate: €490.49 Saw frame: pivoting frame Saw blade dimensions: 3270x27x0.9 mm Blade speed: 35/70 (PLC) m/min Variable blade speed: 20–100 (CNC/Touch) m/min Cutting capacity 0° round: 300 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 420x200 mm Cutting capacity 45° round: 240 mm, square: 230 mm Cutting capacity 60° round: 170 mm, square: 170 mm Min. leftover length: 220 mm Working height: 835 mm Hydraulic motor: 0.37 kW Coolant pump motor: 0.12 kW Length: 3,220 mm Width: 2,050 mm Height: 1,900 mm Weight: 1,090 kg PLC version: Material feed adjustment via handwheel, mechanical counter, and limit switch CNC version: Feed length and piece count programmable via CNC (99 programs) TOUCH version: Same as CNC but with 7" touchscreen for easier operation Automatic cutting cycle: Clamping, saw blade and coolant on, cutting process, saw blade and coolant off, rapid return stroke, unclamping Automatic material feed: 800 mm / stroke Chip conveyor (CNC/Touch) Variable cutting pressure Hydraulic vices Material chute Recommended max. diameter in automatic mode for solid material: 150 mm Operating manual in GERMAN ALTERNATIVES: Model 420ACNC: €31,700.00 Model 420 ATouch: €33,750.00 OPTIONS: Rsdpsynm Snjfx Ag Tep Roller conveyors and saw blades available on request

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €12,680 Leasing rate: €243.46 Saw frame: Swivel frame Saw blade dimensions: 3120x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity 0° (round): 280 mm Cutting capacity 0° (square): 240 mm Cutting capacity 0° (flat): 350x140 mm Cutting capacity 45° (round): 230 mm; (square): 200 mm Cutting capacity 60° (round): 140 mm; (square): 140 mm Cutting capacity -45° (round): 200 mm; (square): 170 mm Working height: 830 mm Length: 1600 mm Width: 1550 mm Height: 1750 mm Weight: 460 kg Hydraulic vise Frame lowering and lifting by hydraulic cylinder Rapid lowering Automatic rapid lowering and lifting, controlled by sensor pin Rjdpsynm Shsfx Ag Tep Adjustable cutting pressure to suit material cross-section and quality Dual safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid lifting of the saw frame; stop lifting of the saw frame; vise opens OPTIONS: Roller conveyors and saw bands available on request

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €10,860 Leasing rate: €208.51 Saw frame: Swivel frame Saw blade dimensions: 3120x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity at 0° round: 280 mm Cutting capacity at 0° square: 240 mm Cutting capacity at 0° flat: 370x140 mm Cutting capacity at 45° round: 225 mm, square: 215 mm Cutting capacity at 60° round: 140 mm, square: 140 mm Working height: 830 mm Rodpfx Agsynm Sbj Tsp Length: 1650 mm Width: 1200 mm Height: 1850 mm Weight: 390 kg Hydraulic vice Lowering and lifting of the saw frame by hydraulic cylinder Rapid lowering Automatic rapid lowering and lifting, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Double safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ The vice closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid lifting of the saw frame; stop of saw frame lifting; vice opens OPTIONS: Roller conveyors and saw blades on request