WRC 1550 AC kompletna žaga (stacionarna)

WRAVOR WRC 1550

Stanje: novo, Leto izdelave: 2024, WRAVOR Horizontal Bandsaws WRC 1050, 1150, 1225, 1250, 1550, 2000 Edgers, multi-blade saws, mechanization solutions, etc. Giedpfetpwgxox Afqol We are your contact partner for Wravor in Germany. We are happy to offer you suitable machines.

Stanje: pripravljen za uporabo (rabljen), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to changeover to wheel loader All service and lubrication intervals have been fully documented and carried out in accordance with the inspection log! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil and oil filter changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Gjdpfx Ajvtwuasfqeil Immediately available - fully operational Location: Austria, near St. Pölten

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Gedpsfg E Hpjfx Afqsil Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Rated output: up to 7,000 kg/h Electrical connection: 3 kW 400V 50Hz (3-phase) Electrical fuse protection: 16 A slow-blow Dimensions: Length: 4,435 mm Width: 2,250 mm Height: 2,160 mm Discharge/infeed height: 1,430 mm Belt width: 1,100 mm Application width: 320 - 870 mm Application height (stepless adjustable): 10 - 50 mm Weight: 3,400 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Belt speed: 1.2 - 4.5 m/min Contact time: 1.5 - 6 min Water consumption for cleaning: 20 l/min (continuous operation, cleaning mode) Connections: Wastewater connection: Ø 75 mm Juice outlet connection: DN 40 Height of juice outlet: 200 mm Height of wastewater outlet: 100 mm Height of pomace discharge: 800 mm Suitable for pome and stone fruit Gsdpfx Ajdix N Hsfqjil Scope of delivery: High-pressure cleaner, compressor Includes powered brush rollers (top and bottom)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Ricoh IP5000 AD3/AD4 128m Tellerstand A: 100 miljoen Gjdpewk Eilsfx Afqjil Tellerstand B: 80 miljoen Inclusief Hunkeler UW6 en RW6 tight web! Hunkeler POPP6 Roll2Roll Foto's beschikbaar op aanvraag...

Stanje: rabljeno, prevoženi kilometri: 67.400 km, dvižna višina: 59.100 mm, Leto izdelave: 2018, Pogon: kolo Lastna teža: 48.000 kg Gisdpfxjtr Nuqo Afqel Dvižna zmogljivost: 8.000 kg Serijska številka: 076646 Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Transportne mere (D x Š x V): 16,85 x 2,75 x 4 m Za več informacij se obrnite na PFEIFER GROUP.

Stanje: novo, With the Brugger Power Split S22, we present a powerful vertical log splitter that impresses with a splitting force of 22 tons. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in terms of drive – whether via electric motor or PTO. The splitting process features two speed settings, allowing for fast and efficient wood processing. Key features: - 22-ton splitting force - Combination drive: 5kW electric motor & PTO drive - Weight: 335kg - Up to 110cm log length - Log lifter Gijdetpxgtepfx Afqjl - Two speeds A log lifter is included in the scope of delivery, making it easier to handle heavy logs. A hydraulic cable winch is optionally available, providing additional application possibilities and further simplifying work. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to easily process even larger pieces of wood. A support table for shorter pieces is also included. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood – whether for professional or private use. Pricing: Power Split S22 = €2,670 Support table for short wood = €125 4-way splitting wedge = €99 Hydraulic cable winch = €595 Contact us for your customized offer!

Stanje: nepreverjeno (rabljeno), Maximum milling length: 400 mm Giodpfek Tyrwsx Afqel Maximum milling width: 150 mm Maximum clamping thickness: 25 mm Hydraulic motor: 2.2 kW 2 milling motors, each 2.2 kW Milling motor speed: 12,000 rpm Converter: 8 kVA, 200 Hz Weight approx.: 1,200 kg Output: approx. 200 - 600 pieces/hour, depending on shape and size

Leto izdelave: 2020, Stanje: novo, Designed as a plug-and-play complete system mounted on a mobile stainless steel base plate with juice pump, featuring a 63 kW Wolf oil-fired boiler, 2 heat exchangers, pasteurization section for approx. 20–30 seconds with automatic control, consisting of: heating circuit, heating circuit pump, and expansion vessel; 2 plate heat exchangers for juice preheating/cooling and heating up to 80°C; 24 m pasteurization section; automatic pneumatic temperature control. Gjdpscx R Ddefx Afqoil Capacity: 5,000 liters of juice per hour (depending on inlet juice temperature).

Leto izdelave: 2020, Stanje: generalkompletno obnovljen (rabljeno),