Mobile Edge Anleimen Stroj nakup rabljenega (81.919)

Stanje: zelo dobro (rabljeno), Obdelovalni stroj za lepljenje robov SCM Casadei Flex 17 kot SCM K100 Predrezkarji, Nanašanje lepila z valjem, Pnevmatska predgiljotina, Pritrdilni valji, Končna odrezovalna žaga, Frezni agregat zgoraj-spodaj R1 – R2, Ravnalna strgala, Dolžina stroja: 320 cm, Podajalna hitrost: 7 m/min, Bdjdpfoxxlunox Afqok Maksimalna višina obdelovanca: 50 mm, Maksimalna debelina obrobe: 3 mm, Rabljena naprava, v zelo dobrem stanju. Prevoženih le 15.250 metrov. Možnost preizkusa pred nakupom.

Stanje: kot nova (razstavni stroj), Leto izdelave: 1993, Band width: 150 mm Band length: 3000 mm Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0° to 45° Extraction connection: Motor power: 3 kW Machine length: 2000 mm Bdedpfx Afjwv Nbvjqok Machine width: 1200 mm Weight: 600 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Single-sided laser and PU edge banding machine incl. panel return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edgebanding material, rolls: 0.3 – 3 mm Edgebanding material, strips: 0.4 – 20 mm PC22 control Control system: Powertouch Units & Gluing Jointing milling unit S2 Automatic horizontal adjustment for jointing Automatic vertical adjustment for jointing Lasertec activation unit Performance Basic gluing unit A20, extension module Magazine upgrade to 6 rolls Horizontal free-standing roll support plate Continuously adjustable edge pressure shoe Bsdpfx Asxgrfpjfqjdk Suction device for strip separation Servo edge feeding Edge thickness measurement for roll material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Pressure zone wetting unit Separator agent spraying unit top/bottom End trimming unit HL86 chamfer/straight 0.22 kW servo Pneumatic adjustment for trimming motor Automatic adjustment for end stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-shape milling unit MF21 servo Separator agent spraying unit top Contour trimming unit FK31/20-cycle Powertrim Contour trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of: Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Solid wood edge gluing Automatic adjustment infeed fence 500 mm infeed extension Sliding carriage Scissor-type workpiece support table Extension for scissor-type table Workpiece thickness 8 mm instead of 12 mm Volt-free contact Flexible edge sequence management software Gap setup Panel return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oscilacija brusilnega traku Bdodpsxr Dfljfx Afqsk Naprava za brušenje furnirja

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Robna lepilka Kuper Optimat KDF 660 – rabljena, pripravljena za predstavitev Rabljena robna lepilka Kuper Optimat KDF 660 je v dobrem stanju in je trenutno priključena na elektriko, zato je možen preizkus na lokaciji. Podrobnosti: Model: Kuper Optimat KDF 660 Stanje: rabljena, delujoča Bedpoxu Iafsfx Afqodk Stroj je priključen in ga je možno preizkusiti Storitev: Na zahtevo lahko organiziramo razstavljanje in nakladanje stroja. Če vas zanima ali za ogled, nas kontaktirajte!

Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, one-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: Roll material: 0.4 - 3 mm Wood strips up to 5 mm Bjdpsxugpljfx Afqedk Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min. For corner copying (at 16, 18 & 19 mm thickness): feed speed 12 m/min. Aggregate equipment: RIEPE - separator agent application Joint trimming unit with two counter-rotating, demand-driven motors, equipped with diamond-tipped spiral cutterheads Option: Diamond cutting tools, height 65 mm instead of 30 mm Automatic edge feeder with rotary reel table, diameter 800 mm, with automatic strip magazine, spiked roller for wood strips Glue pot with automatic temperature control and stand-by function, glue roller temperature adjustable separately, capacity approx. 1.5 kg Option: Glue run-out function, Teflon-coated drip pan, adapted software for EVA/PU glue Option: Quick-change system for glue pot Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with two HF motors, 0.55 kW Pneumatically tiltable from 0 - 10 degrees, controlled from the control panel Combination milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via control system Option: Nesting kit for combination milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (Not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors each for positioning the horizontal tracing shoes and the tool Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Option: Nesting kit for radius scraper Flat scraper unit with pneumatic activation/deactivation via control panel RIEPE cleaning agent spraying unit Buffing unit with 2 motors, 0.09 kW Control system: 18.5-inch graphic touchscreen with L-Motion software Option: Volt-free contact for integration of a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity. The return conveyor visible in the photos is not included in the scope of delivery.

Stanje: rabljeno, Robna lepilka Hebrock AKV 3005, dobro opremljena, možnost preizkusa pred nakupom. Tekočine pred rezkarji, predrezkarji, nanos lepila z valjem, ima izpust lepila, drugi lonec za lepilo v kompletu, pnevmatska predgiljotina, pritisni valji, končna krožna žaga za rez, gornja-donja rezkalna enota, R1–R2 pnevmatsko nastavljiva, profilna strgala, enota za obdelavo vogalov, tekočine pred strgali, ravna strgala, polirka, Bdedpow I Sp Sefx Afqok maks. debelina robnega traku v roli 3 mm, max. debelina obdelovanca 12 mm, stroj v zelo dobrem stanju.

Stanje: rabljeno, Leto izdelave: 2018, Used machine Bdodjwka S Ijpfx Afqek Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: T/41242, višina obdelovanca (maks.): 52 mm, največja debelina roba: 12 mm, delovna višina: 880 mm, lastna masa: 3.000 kg, hitrost prepustnosti: 233 mm/s, TECHNICAL DETAILS Operation: One-sided, right-hand execution Bodpfx Afoxtfcheqsdk Edge thickness: 0.2 - 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed rate: 10 - 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 HF motors, 1.5 kW Double end trimming unit with 2 HF motors, 0.3 kW Flush milling unit with 2 HF motors, 0.7 kW Fine bevel milling unit (FASE) with 2 HF motors, 0.3 kW Fine radius milling unit with 2 HF motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for rolls up to 800 mm diameter with pneumatic cutting device for thicknesses up to 3 mm Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning upon entering the jointing value CM - CombiMelt - modular bonding system Control system via 7-inch TFT touch color display 100 work programs freely storable alphanumerically PLC for high-resolution track control Individual frequency inverters for separate activation of the processing motors Hole detection for exclusion of CNC machining Network capability for integration into a data network

Stanje: rabljeno, Leto izdelave: 2006, rabljeno, v vrhunskem stanju Proizvajalec: Hebrock Tip: top 2000 Leto izdelave: 2006 Št. stroja: 6487 Debelina roba: 0,5 mm - 3 mm Višina obdelovanca: min 10 mm, maks 45 mm Širina obdelovanca: min 90 mm Podajanje: 10 m/min Rezanje iz role Rezkalna enota Bedpfxsxuv Rfj Afqedk Poravnava in radijsko rezkanje Premično Priključek za odsesovanje: D 100 mm Potrebna površina: cca 3100 mm x 1320 mm x 1300 mm Teža: cca 550 kg Skupna priključna vrednost: 15,75 A / 7,27 kW Lokacija skladišča: 97447 Gerolzhofen, prost naklad, brez embalaže Predaja v trenutnem stanju, kot je bilo ogledano, brez garancije in jamstva.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banders for bonding and processing flat edges using coil materials (melamine, PVC, ABS, veneer) and strip materials (solid wood, laminate, knife-cut veneers, etc.) • NC control with touchscreen • Automatic start of aggregate motors • Direct selection for second pass • Production data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material *): 0.4–10 (12) mm Workpiece projection: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air connection: 7 bar Glue pot capacity: 2 (approx.) kg *Depending on configuration. - GLUING UNIT VC-511 Applies hotmelt adhesive to the workpiece, feeds the edge material to the workpiece, automatically trims it from the coil, and presses it in place for optimal positioning. - TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a maximum thickness of 3 mm. JOINTING UNIT RT02 Joints the workpiece prior to glue application. Bsdpfx Afsxzb Iieqjdk Fitted with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing of thick PVC/ABS edges. FLAT SCRAPER UNIT RC02 For removing excess glue at the joint area between edge and panel. Equipped with tracing rollers and a straight knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edges with cloth polishing discs. The unit automatically adapts to workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of release agent via injectors actuated by CNC control. KIT PRO-GLUE The PRO-GLUE kit consists of the following components: • TEKNO-GLUE system for optimum gluing, featuring: - controlled glue roller pressure - automatic retraction during feed stops - automatic ON/OFF of glue section REVERSE system for glue roller operation in forward or reverse mode. Electrical and mechanical provision for the use of special glue pots for POLYURETHANE adhesive on machines configured for EVA glue. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC. Pair of multi-profile cutters for the fine trimming unit: Bevel cutter 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the sensor relative to edge thickness, controlled via the CNC. Allows activation of corner-only processing. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 540 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0261973988, Oprema: ABS, Na voljo je tipska ploščica, Leto izdelave: 2019 Oprema in tehnični podatki: Dimenzije obdelovanca Debelina obdelovanca: 8–60 mm Širina obdelovanca: od 70 mm Višina roba: do 8 mm Debelina roba (material v roli): do 3 mm Pomik Nastavljiva hitrost od 8 do 14 m/min, brezstopenjska regulacija Tehnologija lepljenja Lepilni sistem za granulat Rezervoar za lepilo pod območjem pomika Zamenljiv rezervoar HOMAG Prilagojen za predelavo EVA in PUR Funkcija hitre zamenjave Agregati Rezkalna enota Območje predgretja Pritsna postaja Postaja za ravno, radialno in poševno obdelavo Strgala: profilno in ravno Dodatna oprema in upravljanje PU pritisni valji Upravljalna plošča HOMAG powerTouch Bdodsxw Nwkepfx Afqsk Desna različica stroja V skladu s CE Dimenzije: pribl. 3900 x 950 x 1.150 mm Teža: pribl. 2.000 kg Razpoložljivost: takoj

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min Bedpfx Afot Hxxpsqjdk The machine is well-maintained and in very good condition.

Stanje: rabljeno, Leto izdelave: 2001, skupna dolžina: 5.650 mm, skupna višina: 1.750 mm, skupna širina: 1.100 mm, Teža: 1.950 kg Cena: Po dogovoru - Letnik: 2001 - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Serijska številka: 468/0-103 Bsdpoxlqpdefx Afqedk - Transportne mere: 5650 mm x 1100 mm x 1750 mm (d x š x v) - Transportna teža [kg]: 1950 kg - Transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena ne vključuje DDV DDV/obračun razlike v ceni: DDV je odbiten za podjetja Dostava in prevzem v račun možno kadarkoli za vse iz industrijske sfere Yorick Diebels

Stanje: zelo dobro (rabljeno), Ugoden nakup iz likvidacije s podajalnikom in oscilacijo Bodoxn Skzjpfx Afqedk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Sestavljen iz: - Podajalna miza Profi TBL100/20/06 (HOMAG, letnik 2014) - Profil KAL310/7/A3 (HOMAG, letnik 2014) KAL je primeren za obdelavo oplemenitenih lesenih plošč: Bedpfoqi Hqiex Afqodk - z melaminskim robom 0,3-0,4 mm - z ABS in PP robovi 1,0-2,0 mm (na voljo orodja R 1,0 1,5 2,0) Stroj je dodatno opremljen z rezkalno enoto za vertikalno in horizontalno utiranje in rezkanje. V primeru interesa lahko pošljemo popolno potrdilo naročila. Demontaža in nakladanje stroja sta v domeni kupca.

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 020313L, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, pritisk: 7 letvica, Description: Solid steel construction for high machine stability. Workpieces are conveyed on a smooth-running transport chain with plastic plates. The top pressure unit is equipped with two rows of rubber-coated rollers. Manual adjustment of the top pressure, with automatic positioning of the processing units according to the changed workpiece thickness. Mechanical digital display for panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3mm edging material. Support plate for edging rolls with a diameter of up to 800 mm. Central extraction system. Roller track as workpiece support along the entire machine length. Protective hood over all processing units. Control panel, including emergency stop button and lockable main switch. Transformer for 24V auxiliary circuit. Pre-milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable stopper at the infeed. Maximum material removal: 2 mm. 2 motors, each 1.1 kW, 12,000 rpm, maximum material removal 2 mm, extraction diameter 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with rapid heating and glue application roller. System for temperature control and recycling of excess hot-melt adhesive. Power consumption: 3.5 kW, capacity: 1.5 kg, heat-up time: approx. 15 min, depending on ambient temperature and adhesive. Bodexn Hzbspfx Afqodk End trimming unit With 1 saw blade for trimming the front and rear overhanging edges at a 90° angle, flush with the workpiece. Trimming of the front and rear overhangs is individually controllable as required. Motor: 0.35 kW Saw blade speed: 12,000 rpm. Flush trimming unit With 2 motors for milling radii or chamfers at the top, bottom, and/or front edge. Vertical and horizontal adjustment of the motors on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motors not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, each 0.55 kW, 12,000 rpm. Diamond cutting tools, 68 mm Z6, R=2. Profile scraping unit Flat scraping blade Buffing unit Form trimming unit With 0.22 kW, 12,000 rpm, prismatic linear guide. Max. panel thickness: 50 mm Max. edge material thickness: 2 mm Technical data: Edging strip thickness (for manual feed) max.: 5x45 mm Pre-milled panel thickness: 10 – 40 mm Unmilled panel thickness: 10 – 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°–210°C Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction socket diameter: 2x 60 mm CE standard

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, PROFILATRICE COMAL PRD 12 Bdjdsxdr Swopfx Afqok Avtomatski robilnik za obrezovanje trakov. Uporablja se za pripravo robov trakov pred nadaljnjim valjanjem. Stroj je opremljen z nizom valjev, ki omogočajo kontinuirano hladno profiliranje trakov in pločevine do željenega profila ali cevi. Stroj je bil zelo malo uporabljen, popolnoma delujoč in v dobrem splošnem stanju. Na voljo sta originalni priročnik in dokumentacija.

Stanje: zelo dobro (rabljeno), Robna lepilka Artech Akron 420 Nanašanje lepila z valjčkom, Pnevmatska predhodna giljotina, Pritiskalni valji, Bodpfxexw Uzzj Afqjdk Krožne žage za rezanje na mero, Rezkalni agregat R1, R2, Profilna ciklina, Zelo dobro ohranjena.

Stanje: rabljeno, Leto izdelave: 2022, Debelina roba: od 0,4 do 5 mm Debelina obdelovanca: od 10 do 45 mm Bsdpfsxpn Ufox Afqedk Podajalna hitrost: 8 m/min. - Quick-Set sistem - Leplilni agregat z DIA rezkarji - Samodejno podajanje roba - Linearna kap žaga z radius rezkanjem - Multifunkcijski rezkalni agregat - Podvozje

Stanje: dober (rabljeno), Leto izdelave: 2006, • Glue pot Bjdpfeibdyqsx Afqedk • Conversion/retrofit was carried out by Hüttenhölscher GmbH in Verl • Area of application: adhesive application unit for handle strips • Vacuum table: included • Automatic pressure zone: included

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7729 TEHNIČNI PODATKI Oprema: - krožnik za trak - rezervoar za lepilo (granulat) - podajalnik traku - giljotina – predhodno rezanje robnega traku - dva pritisna valja - minimalna širina obdelovanca 50 mm - debelina obdelovanca 10-40 mm - minimalni notranji polmer 50 mm - lepljenje pod kotom z robnim trakom debeline 1 mm, 0-45° - debelina robnega traku 0,3-3 mm - električni pomik - skupna moč 2 kW - tlak stisnjenega zraka 6-7 bar - dimenzije d/š/v 1700x1300x1550 mm - teža 310 kg Bdodpsxaprgjfx Afqsk PREDNOSTI – slovenska proizvodnja – nelakirana – DTR dokumentacija – zelo dobro ohranjena – rabljeni robni lepilni stroj Cena brez DDV: 6500 PLN Cena brez DDV: 1550 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo glede na večja nihanja tečajev)

Stanje: novo, -New- The upper section is manufactured in heavy-duty cast iron design and equipped with an integrated 3-phase motor 380 V, 2.2 kW, 2850 rpm. The machine is fitted with a built-in switch-socket combination, motor protection switch, and main switch according to VDE standards. The dimensions of the abrasive belt back plate are 850 x 150 mm. The steel worktable is height adjustable via spring pressure. Belt size: 150 x 2280 mm. The abrasive belt back plate is coated with a graphite glide lining. The machine is supplied with an assortment of sanding belts. Also included are an angle and a mitre stop. When connected to a central extraction system with an air speed of at least 20 m/s, the machine is dust-tested (GS) in accordance with Holz-BG-Stuttgart. Technical data: Motor power: 2.2 kW Abrasive belt size: 150 x 2280 mm Belt speed: 22 m/sec. Table size: 750 x 350 mm Space requirement: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm Item No. 1050-500000 Includes: - Swivels 90-180° Item No. 1050-590010 - Belt oscillation Item No. 1050-590020 - Support table at deflection roller Item No. 1050-590040 - Pneumatic belt tensioning Item No. 1050-590155 Bdjdpfsvwf Ivsx Afqok

Stanje: novo, SCM Olimpic 500 HT – Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 – Version "HP T-ER2" - "eye-S" control console (control panel) Bsdpowkf Ihjfx Afqsdk - Human-Machine Interface software (HMI) "Maestro active edge" - Fine milling and radius scraper unit, radius = 1 mm - Fine milling and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and gluing area - "Nesting" tracing rollers - Separator agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for delicate edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit: 3 automatic settings straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is new and still in its original packaging. Special offer demonstration machine at a discounted price.

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit Beded Inktepfx Afqjdk - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit