Mobile Edge Anleimen Stroj nakup rabljenega (81.917)

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations Bdsdpfx Aefig Rwobgok 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, OTT Tornado Top Edge Banding Machine – Excellent Condition PU glue pot with separating agent system, also suitable for EVA adhesives. In September 2024, we had the entire machine recalibrated and the gluing unit renewed. The result is flawless with transparent adhesive and outstanding with white glue on white panels. The machine runs perfectly and without disruptions. Technical Data: • Edge thickness: 0.4 – 8 mm • Panel thickness: 8 – 40 mm • Minimum panel length: 150 mm • Minimum panel width: 70 mm • Feed speed: 14 m/min • Pre-milling unit: 2 HF motors, 2.3 kW, 12,000 rpm • End trimming unit: 2 HF motors, 0.3 kW, 12,000 rpm Bsdpfx Abjv Sm Hcegedk • Flush trimming unit: 2 HF motors, 0.7 kW, 12,000 rpm • Fine trimming unit: 2 HF motors, 0.3 kW, 12,000 rpm • Corner copying unit • Scraper unit • Buffing unit • Triple spray system • Total power: 17.5 kW Dimensions: • Length: 6,180 mm • Width: 1,770 mm • Weight: 3,100 kg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Belt dimensions: 2600 × 200 mm - Work table: 935 × 460 mm - Auxiliary table on belt tensioning roller: 350 × 350 mm (with round sanding attachment) - Sanding spindle with rubber rollers, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanically driven with separate, maintenance-free oscillation motor - Table height adjustment via handwheel, additionally adjustable relative to sanding belt (forward and backward) - Sanding unit tiltable from -10° to 90°, tilting via handwheel with digital display of inclination - Precise angle settings thanks to mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer device - Fast conversion from veneer to solid wood sanding - Height-adjustable idle disc table with adapter for dust extraction for sanding on the belt tensioning roller - Large-sized mitre fence with stepless angle adjustment and sliding ruler - Extraction: adapters Ø 100 mm on both sides (idle disc table, right and left extraction hood) - 2 sockets 400 V on machine stand (for machine and feed device) - Torsion-resistant, heavy-duty steel frame for high running smoothness and stability - Large-surface work table with sliding coating Bdedpfx Ajxwz I Iobgsk - Recess in machine stand for pallet truck – facilitates internal transport Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Hesse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2459, Stroj v zelo dobrem stanju - zelo pregleden upravljalni del - minimalna širina obdelovanca cca 80 mm - minimalna dolžina obdelovanca cca 200 mm - podajna hitrost cca 10 m/min - transportna veriga s trdno privitimi specialnimi verižnimi ploščami - dvojni zgornji pritisni valj - dolžina stroja 4300 mm - širina stroja 1400 mm - teža cca 1250 kg - izvlečni nosilec obdelovanca na sprednji strani Bdodpfx Ajx Ahmujbgjk - avtom. centralno mazanje za kapno žago & kotno rezkanje - posoda za talilno lepilo s teflonsko prevleko (zelo malo vzdrževanja) - pripravljenost za obratovanje cca 5 - 6 minut - Poravnalna enota - pnevmatsko valjčno kapiranje - neposredno nanašanje lepila na obdelovanec - kapirna enota za sprednjo in zadnjo stran - poravnalna/posnemalna/radialna rezkalna enota - zaobljanje robov - ravnalna strgala s dvojno kontrolo

Stanje: zelo dobro (rabljeno), KATALOGSKA ŠTEVILKA 7730 TEHNIČNI PODATKI Rezkar: - minimalna širina obdelovancev 50 mm - debelina obdelovancev 16-40 mm - debelina robnega traku 0,5-3 mm - moč motorja 1,1 kW - potreba po zraku 6 bar Bodpfx Ajxa Egmjbgodk - priključek za odsesavanje 60 mm - dimenzije d/š/v 1900x850x1450 mm - teža 290 kg Rezkalna enota: - premer žaginega lista 150 mm - dimenzija mize 750x820 mm - moč motorja 0,12 kW/2800 obr/min PREDNOSTI – izdelek poljske proizvodnje – rezalna enota – v kompletu profilni rezkarji – nelakirana – DTR dokumentacija – rabljena rezkalna, zelo dobro ohranjena Cena netto: 4500 PLN Cena netto: 1070 EUR glede na tečaj 4,2 PLN/EUR (Cene se lahko spreminjajo ob večjih spremembah tečaja)

Stanje: novo, hitrost pomika os X: 7 m/min, višina obdelovanca (maks.): 50 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, With corner copying, for plastic edging from 0.4 to 3 mm, solid wood edging up to 3 mm, and workpieces from 8 to 50 mm, with pneumatic adjustment Panel thickness: 8 – 50 mm Edge thickness: 0.4–3 mm (coil material) Pre-milling: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Top equipment for high productivity in a compact footprint! Intuitive operation via the eye-S control and 10" touchscreen: HMI Maestro Active Edge; Graphical display of all processing units and their operational status; Graphical simulation of processing tasks; Control of all processing units; Regulation of glue pot temperature; Assistance functions for machine setup according to the processing program; Error diagnostics for quick resolution of simple faults; Statistics on processing parameters; USB port; Prepared for network connection; Prepared for Industry 4.0 with API REST data transfer protocol Outstanding access to working units thanks to the large hood, providing both protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Saw-trimming unit with corner rounding (me 35 tr s): For trimming the edge as well as rounding corners on the top and bottom; When applying solid wood edges, trimming is done using the radius cutter; High-frequency motor with 12,000 rpm; Saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Bsdpfx Absxxvanjgodk Adjustment of the infeed fence by spacer plates Dimensions and Weights Length (product): approx. 3314 mm Width/Depth (product): approx. 1085 mm Height (product): approx. 1300 mm Weight (net): approx. 623 kg Flush-radius milling unit Flush-radius milling unit drive power: 2 x 0.35 kW Flush-radius milling unit cutter diameter: HM 55.3 mm Flush-radius milling unit cutter speed: 12,000 rpm Flush-radius milling unit extraction port diameter: 60 mm Flush-radius milling unit number of extraction ports: 2 Corner copying unit Corner copying unit drive power: 0.35 kW Corner copying unit tool diameter: 58 mm Corner copying unit speed: 12,000 rpm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue unit Glue pot drive power: 0.25 kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60 mm Glue pot filling capacity: 0.8 kg Pneumatic connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed drive power: 0.55 kW Feed speed: 7 m/min Edging Edge thickness coil material: 0.4 – 3.0 mm Pre-milling unit Pre-milling unit extraction port Ø: 2 x 80 mm Pre-milling unit drive power: 3 kW Pre-milling unit cutter speed: 7,200 rpm Pre-milling unit diamond cutter Ø: 80 mm Pre-milling unit cutter height: 56 mm Pre-milling unit material removal: 0.5 / 1 / 1.5 / 2 mm Scraper units Radius scraper: 2 mm Buffing unit Buffing unit drive power: 2 x 0.14 kW Buffing unit speed: 2,800 rpm Workpiece Workpiece thickness: 8 – 50 mm Workpiece length min.: 120 mm Workpiece width min.: 110 mm

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Bdjdpfxjhqadcs Abgsk Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 202.01.006.16, hitrost pomika os X: 12 m/min, skupna dolžina: 3.940 mm, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, Redno vzdrževano s strani proizvajalca. Vsa navodila za uporabo na voljo. Menjava zaradi prehoda na večji stroj. Bdodpfjxuik Sex Abgsk

Stanje: rabljeno, Lange B90 KFE Debelina roba 0,4 - 3 / 5 mm Upravljalna plošča: PLC zaslon na dotik Predrezalna enota za obdelavo pred lepljenjem Avtomatski magazin za robne trakove za material v roli Teflonsko prevlečen, hitro menjajoč kotliček za talilno lepilo v granulatu Delovna višina 8 - 50 mm Natančno nastavljiv lepilni valj Klešče za rezanje do 3 mm za predrezovanje trakastega materiala Pritiskalna enota Rezkalna enota Multifunkcijska rezkalna enota za poravnavo, radij in posnetje robov Enota za kopiranje vogalov za robove do 2 mm, vklop iz upravljalne plošče Radij strgalo Ploščato strgalo Bodpfx Aboxl Aw Tegedk Polirna enota Razpršilna enota na vstopu in izstopu Letnik 2018 Stroj je DELOVNO SPOSOBEN v DOBREM STANJU Ex site CENA NETO € 15.000,00

Leto izdelave: 2002, Stanje: dober (rabljeno), Article number: MA1073 Manufacturer: FIM Type: Unknown Year of manufacture: 2002 Length [mm]: 2000 Bodpfxod I E Sno Abgodk Width [mm]: 700 Height [mm]: 1100 Weight [kg]: Approx. 500 Connected load: 380V Automatic feed: Yes Table size (LxW): 1200 x 400 mm, table incline adjustable up to 45° Disc diameter: Double-sided deburring in a single pass as two sanding belts are in use Accessories: Extraction unit / 2 spare drive rollers

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7404 TEHNIČNI PODATKI - min. debelina obdelovanca: 16 mm Bdsdpfxst H E Iko Abgok - maks. debelina obdelovanca: 60 mm - višina do ravnine mize: 920 mm - motor: 1,2 kW - napetost: 400 V - krožnik – giljotina – uvajalni valji za trak – rezervoar za lepilo – 3 vodilni valji (prvi pogonski) - delovna površina: 1600x670 mm - dimenzije (d/š/v): 1600x1400x1100 mm - teža: 170 kg PREDNOSTI – poljska izdelava – za lepljenje ravnih in zaobljenih robov – rabljeni stroj, v zelo dobrem stanju Neto cena: 5900 PLN Neto cena: 1400 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.774 mm, največja debelina roba: 3 mm, skupna masa: 842 kg, višina plošče: 50 mm, For plastic edging from 0.4 – 3 mm, solid wood edging up to 5 mm, and workpieces from 8 – 50 mm Panel thickness: 8 – 50 mm Edging thickness: 0.4 – 3 mm (coil material) Jointing unit: Yes Radius trimming unit: Yes Scraper: Yes Buffing unit: Yes Top features for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic representation of all processing units and their operating status Graphic simulation of processing operations Control of all processing units Regulation of glue pot temperature Assistance functions for setting up the machine according to the processing program Error diagnosis for quick resolution of simple faults Statistics on processing parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, providing protection and noise reduction Automatic unit positioning when changing panel thickness Panel feed via feed chain with rubber glide shoes Quality Made in Italy Equipment details 10” touchscreen control panel Optimum machine management via the new 10” touchscreen control panel with Maestro active edge, displaying all machine functions graphically Pre-milling unit Two DIA pre-milling cutters Glue station The glue is rapidly and evenly heated by heating rods located both in the glue pot and on the glue application roller Automatic temperature reduction during longer machine idle times Bdedpfx Aoxxuvbebgok Glue tank is Teflon-coated for easy glue change Device for recycling unused glue Automatic application of edging strips with guillotine for edges up to 3 mm Turntable with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for glue tank Flush/radius trimming unit With tracing rollers in horizontal and vertical direction for optimum tool positioning Equipped with combination trimming tool Ø 55.3 mm for flush trimming of edges up to 5 mm and radius edges up to 2 mm Precise adjustment by means of 2 digital displays With chip extraction Surface scraper Absolute cleanliness for a perfect finish on the workpiece surface With rotary copy device Buffing unit Driven by two independent motors, adjustable in tilt and height For perfect cleaning and polishing of panel edges Radius scraper With numerical position display For perfect finishing of plastic edges With device to retract the unit when not needed Edge magazine For automatic application of strip edging Solid wood strip edging is automatically loaded and synchronized with the panel feeding

Stanje: novo, Leto izdelave: 2025, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Bjdpfxsff Ed Ts Abgodk Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edging: 0.4 - 3 mm Solid wood edging: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: granulate / quick-change glue pot kit End trimming unit: yes Flush end trimming unit: yes Corner copying unit: yes Flush radius milling unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Bodpfxel D Rx Uo Abgjdk Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3774 mm Machine width: 1546 mm Machine height: 1337 mm Weight: 842 kg

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Bsdov Sv Enopfx Abgedk Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: dober (rabljeno), Koda: 0413 Znamka: STEMAS - ITALIJA Model: PAF - CE standard Bodsxtnc Dopfx Abgjdk Avtomatski elektronski šestskupinski brusilni stroj za robove, primeren za plošče s ravnimi in oblikovanimi robovi, masivne, furnirane, neobdelane, lakirane površine, profile, pogrebne krste, okvirje in različne druge elemente – v skladu s CE standardom. Tehnični podatki: Delovna višina min/maks mm 15/100 Minimalna dolžina obdelovanca mm 200 Podajanje po tirnici Elektronsko krmiljeno vodilo za vstop obdelovanca Transportni trak s frekvenčno regulacijo hitrosti 6–30 m/min Elektronsko dviganje pritisnega agregata Podpora za panele z elektronsko pozicioniranim nastavljanjem Podajanje po tirnici z gumiranimi podlogami in nastavljivimi gumiranimi pritisnimi kolesi 1. skupina vrtljivih nihajnih brusilnikov – pnevmatska plošča – motor 4 KM (3 kW) z elektronsko nastavitvijo hitrosti – invertorsko elektronsko dvigovanje – avtomatski vstop skupine – elektronski nagib skupine – pihalnik za čiščenje traku – priključek za odsesavanje fi 150 mm 2. skupina vrtljivih nihajnih brusilnikov – pnevmatska plošča – motor 3 KM (2,2 kW) z elektronsko nastavitvijo hitrosti – invertorsko elektronsko dvigovanje – avtomatski vstop skupine – elektronski nagib skupine – mehanski indikatorji SIKO – pihalnik za čiščenje traku – priključek za odsesavanje fi 120 mm 3. skupina vrtljivih nihajnih brusilnikov – pnevmatska plošča – motor 3 KM (2,2 kW) z elektronsko nastavitvijo hitrosti – invertorsko elektronsko dvigovanje – avtomatski vstop skupine – elektronski nagib skupine – mehanski indikatorji SIKO – pihalnik za čiščenje traku – priključek za odsesavanje fi 120 mm 4. skupina nihajnih brusilnikov – pnevmatska plošča – motor 2 KM (1,5 kW) z elektronsko nastavitvijo hitrosti – invertorsko elektronsko dvigovanje – avtomatski vstop skupine – elektronski nagib skupine – mehanski indikatorji SIKO – pihalnik za čiščenje traku – priključek za odsesavanje fi 120 mm 5. skupina vrtljivih krtač – premer krtače 180 mm – motor 2 KM – mehanska nastavitev s kolesom – elektronska hitrost – obratovanje v nasprotni smeri – priključek za odsesavanje fi 100 mm 6. skupina vrtljivih krtač – premer krtače 180 mm – motor 2 KM – mehanska nastavitev s kolesom – elektronska hitrost – obratovanje v nasprotni smeri – priključek za odsesavanje fi 100 mm Maksimalni pritisk 10 atm Dodatni valji Komplet brusnih trakov Skupne dimenzije: stroj 7.400 x 2.200 x 1.700 mm (VxŠxG) Električna omara: 1.200 x 600 x 2.200 mm (VxŠxG)

Stanje: zelo dobro (rabljeno), Robilni stroj Holzher Streamer 1057 Predrezkalniki Nanašanje lepila, kartušni sistem GLUE JET Primeren za PUR lepilo Ima izpust lepila Bdsdpjxf H Rdjfx Abgjk Pnevmatska predgiljotina Pritiskalni valji Končne žage nastavljive pod kotom za rezanje Zgornji in spodnji rezkarji R1, R2 Obdelava vogalov Profilni strgalo Ravno strgalo Maksimalna višina lepljenja (mm): 45 Maksimalna debelina robu v roli (mm): 3 Dolžina stroja 460 cm Podajalna hitrost 10 m/min

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, E450PM – AVTOMATSKI ROBNI LEPILNI STROJ Bdsdpoxac Hwofx Abgok V000047 LME450PM-5 z enoto za rezkanje spojev Stroj v vrhunskem stanju NAPETOST 400/50/3 KRMILJENJE S 7'' ZASLONOM NA DOTIK ZAMENLJIVA LEPILNA ENOTA VR – MULTIFUNKCIJSKA ČELILNA ENOTA Orodje za ravno/zaobljeno čeljenje KOMPLET ORODIJ R=2 mm SKOBELNA REZILO ZA POVRŠINO ENOTA ZA LOČILNO SREDSTVO LED NOTRANJA OSVETLITEV DOKUMENTACIJA V NEMŠČINI INFRARDEČA SVETILKA za ogrevanje plošč SKOBELNA ENOTA Lokacija: iz zaloge 54634 Bitburg - na voljo takoj -

Stanje: novo, Leto izdelave: 2025, Lepljenje enote: Da Debelina robnega traku: največ 3 mm Debelina obdelovanca: 8 mm - 50 mm Širina obdelovanca: min. 110 mm Lepilni kotliček: granulat, hitro izmenljiv kotliček Obrezovalne škarje: da Obrezovanje/poravnava: da Rezkalna postaja: posnetje/ polmer Ravna postružna rezila: Da Bedpfx Asxrbibobgsdk Polmerna postružna rezila: Da Ročna nastavitev uvajalnega ravnila Ročna nastavitev debeline obdelovanca Priključna moč: 5 kW Dolžina stroja: 3314 mm Širina stroja: 1085 mm Teža: 623 kg

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment Bedpfx Aelht H Nsbgjdk The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. Bdsdpfxehqb Rcs Abgek The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Bedpfx Abjv Sk Nnogedk Oscillating sanding belt for optimal sanding results Article number: 5390020 Brand: Holzkraft Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Miter gauge

Stanje: novo, Leto izdelave: 2025, The Hebrock K 36 – top specification with motorized adjustment – showroom model – as-new machine – – immediately available – Bsdpfji Am Uksx Abgsdk This perennial favorite from Hebrock offers unprecedented possibilities. Designed for the highest demands, the K 36 stands for absolute reliability and productivity in daily operation. The option to equip the machine with a profile cutter and a multi-radius scraper sets new standards in perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min./max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power input: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application onto the workpiece for edge material up to 3 mm; joint trimming unit (incl. carbide-tipped tool) up to 3 mm trimming depth, maintenance-free, coated glue pot with quick-change system incl. glue discharge device, HF double-motor end trimming station (approx. 12,000 rpm), HF trimming station (approx. 12,000 rpm) with pneumatic adjustment and interchangeable cutter head (combi design), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift-up device), buffing station, robust chain feed, ball-bearing mounted double pressure rollers, aggregate inspection windows on both the rear and operator sides, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, banding up to 60 mm workpiece thickness. Equipment Options: 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separator spraying device 36/24/2 Cleaning agent spraying device 36/25 Edge protection spraying 36/27 Nesting (1x trimming station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF trimming station (R2/R1 /chamfer) 36/45 Axis package for motorized panel/edge thickness and joint trimming depth adjustment Location: ex-stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 guarantees edge processing at every stage, as it comes equipped with all the components you need to meet your requirements: jointing cutter, cross-cut saw, milling unit, radius scraper blade, corner rounding unit, flat scraper blade, and buffing station. For even greater flexibility in achieving a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Bodpfx Abji Anadogsdk Equipment: Hebrock F5 Next - 10 m/min F5 Next Edgebander With PLC control (including touchscreen) and hot-melt glue application directly to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tooling) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change feature including glue drain, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combi version), corner rounding unit, radius scraper blade, flat scraper blade (including pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change device for corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tooling F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spray unit F5/27. Nesting for milling and radius scraper blade F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024

Stanje: dober (rabljeno), Leto izdelave: 1997, Proizvajalec: MABO Model: BABY S.A.S. BABY 80 Tip stroja: Robna brusilka Tehnični podatki Razdalja med valji: 1.050 mm Bodpfx Aexgvcxsbgedk Največja širina brusnega traku: 120 mm Število hitrosti: 1 Glavni motor: 1,1 kW Brusni trak v vodoravni legi Nastavljiv brusni trak Navpično navzgor Teža cca: 95 kg Prostor za namestitev (dolžina): 2,65 m Prostor za namestitev (širina): 0,55 m Prostor za namestitev (višina): 1,1 m Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -