Profil Voznega Stroj nakup rabljenega (31.915)

Stanje: rabljeno, Leto izdelave: 2014, Tehnične podrobnosti: Teža stroja cca: 6,5 t Na voljo so 3 enaki stroji od OEM Junker Jucam 1S 51 je zasnovan za brušenje glavnih ležišč in odmičnih izboklin na puši odmične gredi (izpušna in sesalna stran). Kedpfxox Auufs Abbowt Dovod in odvod delov potekata samodejno preko zunanje nakladalne celice.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Mubea / Muhr und Bender BFL 350: - kombinirane škarje za profile/palico z luknjačem in izsekačem - prebijalna sila 35 t Kedpjium Stofx Abbjwt - prebiča do Ø 28/23 mm pri pločevini debeline 10/12 mm - reže do Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Posebna orodja in priprave na zahtevo. Možnost odkupa rabljenih strojev. Možna dostava po vsej Evropi.

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno), Model: ST-10 TABLE DIMENSIONS: 1000 x 800 mm Kwsdpfx Abjfl Dtpobet TABLE HEIGHT: 840 mm

Stanje: rabljeno, Leto izdelave: 1983, Funkcionalnost: nepreverjeno, Maximum working width: 750 mm Maximum working height: 150 mm Kodpfov Tnagox Abbswt Spindle diameter: 50 mm Hydraulic motor: 3 kW

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Kjdped S Uf Sjfx Abbowt Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: novo, Akyapak Akbend Ring/Section Bending Machine APK 35 Description • Machine base frame • Horizontal and vertical operation possible • Foot pedal • Standard rolls (segmented) • 2 driven rolls • CE mark / Declaration of conformity • Operating manual in German Technical details • I-beam - flat: 120 x 15 (Ø 750) mm • I-beam - on edge: 60 x 10 (Ø 800) mm • Angle iron: 50 x 5 (Ø 1200) mm • Round material: 35.0 (Ø 800) mm • Maximum tube diameter: 70 x 2 (Ø 1200) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m/min • Roller diameter - top: 155 mm • Bore: 50.0 mm • Total power requirement: 1.5 kW • Weight: 320 kg • Dimensions L-W-H: 730 x 830 x 1350 mm Kwsdpfxod Er S Ie Abbst

Stanje: novo, Solid round material 75 (800) mm Solid square material 60 (750) mm Angle steel 80 x 80 x 8 (800) mm T-bar – web outward 100 x 11 (1000) mm Shaft diameter 80 mm Working speed 6.0 m/min Roller diameter 242 mm Total power requirement 4 kW Machine weight approx. 1.8 t Space requirement approx. 1.5 x 1.05 x 1.4 m Profile bending machine equipped with: - Foot pedal for right/left rotation - Shaft mount: 80 mm - With digital display - Hardened special steel shafts Kodsfv H Ezjpfx Abbjwt - 1 set of standard rollers - Lower rollers are driven - Upper roller adjustable hydraulically up and down - Horizontal and vertical operation - Motor with braking system

Stanje: novo, Solid round bar: 50 (500) mm Solid square bar: 45 (500) mm Angle steel: 80 x 80 x 8 (800) mm T-steel - web outward: 80 x 9 (800) mm Shaft diameter: 60 mm Working speed: 5.0 m/min Kwjdpfxofv H Ewo Abbet Tool diameter: 195 mm Total power requirement: 3 kW Machine weight: approx. 1.0 t Space requirement: approx. 1.2 x 0.9 x 1.2 m Profile bending machine with: - Foot pedal for right/left rotation - Spindle mount: 50 mm - with digital display - Hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roller adjustable hydraulically up and down - Horizontal and vertical operation possible - Motor with braking device

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: PB12093N2025005, premer gredi: 155 mm, lastna masa: 450 kg, Oprema: dokumentacija / priročnik, Neuporabljeni profilni upogibni stroj, letnik 2025! TEHNIČNI PODATKI Premer osi: 50 mm Premer valja: 155 mm Zmogljivost okroglega premera: 50 mm Obrati osi: 11 obr/min Število valjev: 3 kos Kedpjx Tp N Ujfx Abbewt PODROBNOSTI STROJA Upravljanje: konvencionalno Moč: 1,5 kW Dimenzije & Teža Mere (D x Š x V): 1.200 x 800 x 1.800 mm Lastna teža: 450 kg Transportni paketi: 1 kos Delovne ure: 0 OPREMA Dokumentacija CE oznaka CE certifikat

Leto izdelave: 2009, obratovalne ure: 5.387 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Kjdjx U Thkepfx Abbjwt Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On-time: 20,616 h Spindle hours: 5,387 h

Stanje: rabljeno, Model: Spanavello moulding machine, 6+1 spindles, ribbed table, max width 190 mm. Spindle configuration: bottom, right, left, right, top, bottom, universal, PTO drive, used. Kwedpfxex Tt Die Abbot

Stanje: novo, Leto izdelave: 2026, Obročni upogibni stroj, proizvajalec Zopf Ksdpfed Eyz Uox Abbewt Model ZB 100/3 H nov - trije gnani valji z rebrasto površino - hidravličen pomik zgornjega valja - delovni položaj horizontalen in vertikalen - digitalni prikazovalnik s funkcijo pomnilnika - ležaji valjev s stožčastimi valjčnimi ležaji - uporaba izmenljivih drsnih vodil na vodilnih saneh - premer valja 215 mm - premer osi 60 mm - obrati osi 6 obr/min - pogonski motor 1,5 kW - pritisk hidravličnega cilindra 180 kN - zmogljivost upogibanja do 80x15 mm pokončno - okrogla cev do 100x2 mm - kotna železa 70x70x8 mm - teža 800 kg

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine Zopf - Model ZB 110/3 H - three driven rollers with smooth surface - hydraulic adjustment of the upper roller - horizontal and vertical working positions - digital display with memory function - shafts supported with tapered roller bearings - use of interchangeable sliding rails on the guide carriage - roller diameter 260 mm - shaft diameter 80 mm - shaft rotation speed 7 rpm Kwsdpfx Asdkxibjbbst - drive motor 2.2 kW - hydraulic cylinder pressing force 270 kN - bending capacity up to 100x15 mm on edge - round tube up to 120x2 mm - angle iron 80x80x10 mm - weight 1400 kg

Stanje: dober (rabljeno), Profile sander Kodpfxjuggm Hs Abbowt Configuration: • 1st belt unit • 2nd belt unit • 3rd Scotch-Brite unit Total installed power: 8.6 kW

Stanje: rabljeno, Rollforming Line for Plasterboard and Galvanized Subframe Profiles General Description: Complete rollforming line for the production of galvanized steel profiles used in drywall structures and galvanized subframes for doors and windows. The machine processes galvanized steel coils with typical thicknesses of 0.6 – 1.0 mm, featuring quick-change roller adjustment to suit different profile types. Products that can be produced - Drywall Profiles: • Galvanized tracks: widths 57 mm and 77 mm, height 35 mm, steel thickness 0.6 mm • Galvanized studs: 39×55 mm and 39×75 mm, steel thickness 0.6 mm • U profiles for suspended ceilings: 27×60×27 mm, steel thickness 0.6 mm • Shadow gap profiles for suspended ceilings: 20×29×28 mm, steel thickness 0.6 mm - Galvanized subframe profiles 1.0 mm: • Complete series from ART. 201 to ART. 217, with a variety of geometries for L, U, Z, and special profiles. • Variable dimensions: widths from 20 to 46 mm, heights from 15 to 31 mm, customizable versions available. Main technical features • Working thickness: 0.6 – 1.2 mm • Coil width: variable depending on profile • Number of forming passes: 19 rollforming stations Kwodexnmyqjpfx Abbot • Rollers: made of hardened and ground steel • Drive: independent motorization for each roller group • Speed: adjustable feed rate • Cutting unit: flying shear or automatic guillotine • Options: punching units, slot stamping, and quick-change tooling systems

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, AVTOMATSKA PROFILIRKA CASADEI MOD. MATRIX 5 (4+UNIVERZALNA) - 4 glave za skobljanje z legiranimi rezili Ksdox Rp Ixjpfx Abbowt Sestava: - Spodnja horizontalna - Desna vertikalna - Leva vertikalna - Zgornja horizontalna - Univerzalna - Skupna moč: 31,9 kW - CE - Leto 2005

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 480 mm, pomik po osi Z: 340 mm, največja širina rezanja: 335 mm, dolžina obdelovanca (maks.): 6.000 mm, največja hitrost rezkalne vretena: 6.000 obr/min, dolžina odseka (maks.): 6.000 mm, TECHNICAL DETAILS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical interface, Windows XP operating environment Workstations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc cutter diameter: 180 mm Tool length: 150 mm (measured from holder interface) Travel Paths X-axis travel: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Y-axis travel: 480 mm Z-axis travel: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y/Z-axes: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT - Two independent workstations with light curtain and camera system - Fixed angular milling head for 2 tools, ER20A, up to 18,000 rpm - Swivel angular milling head 4 × 90°, ER20, up to 22,000 rpm - Non-swiveling angular milling head for steel, ER20A, 1,554 rpm - Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts - Carbide-tipped saw blade Z=100, D=300 mm, kerf 3.2 mm - Tool holder i=1:3.86 for 18,000 rpm, ER25 - Cooling/lubrication unit for steel machining - Disc milling cutter holder BT30, D=16 mm - Disc milling cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth Kedpfjwprmzjx Abbjwt TECHNICAL DETAILS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable to 90° and 45° (interior); intermediate angles and acute 22.5° adjustable manually with digital display Cutting angle (tilt): pneumatically adjustable to 90° and 45° (interior) Sawing direction: saw blades move from bottom to top Control System Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw Unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 hp) Saw blade cooling: included Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT - Automatically closing safety covers - Electronic positioning of heads with +/- 0.1 mm/m accuracy - Digital angle display for manually adjustable special angles - Pneumatically adjustable saw blade rotation and tilt angles - Operation via Windows control system with 8.4" display and handwheel - Saw blade cooling system included - Saw unit with bottom feed for optimal cutting force

Stanje: rabljeno, Leto izdelave: 2004, Double-end profiler and rebating automatic machine for window and door production Working width: 4000 mm 3 units on each side 1 x saw/chipper 2 x milling spindles - spindle stroke 800 mm! Rebating automatic machine with 16 spindles NC-controlled Many spare parts included Kwjdpfx Asdfx Hcebbot Further specifications available upon request Note on used machinery: • Errors in technical specifications and intermediate sale reserved. • Stated prices are ex-works, loaded free onto truck. • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address and telephone number!)

Stanje: rabljeno, Flat steel bender Glaser HAWE HC4L/3.0, hydraulic – see pictures Kwedpfx Aju Da Afjbbst

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 150 h, BIRLIK PBM 35 profilna krivilka, stroj za krivljenje cevi v zelo dobrem stanju naprodaj Kedpfxexc N Rhs Abbswt Proizvajalec: BIRLIK Makina, tip: PBM 35 Letnik izdelave: 2007 Premer vretena: 50 mm Premer valjev: 155 mm Premer zgornjega valja: 148 mm Delovna hitrost: 4,5 m/min Moč motorja: 1,5 kW Napetost: 3-fazna 380 V, 50 Hz, 3,8 A Širina stroja: 700 mm Dolžina stroja: 900 mm Višina stroja: 1400 mm Teža stroja: 375 kg Zmogljivost krivljenja: I-nosilec - ležeče 120 x 15 (d 750) mm I-nosilec - pokonci 60 x 10 (d 800) mm Kotna jekla 50 x 5 (d 1200) mm Okrogli material 35,0 (d 800) mm Maks. premer cevi 70 x 2 (d 1200) mm Kvadratni material 50 x 40 x 3 mm

Stanje: zelo dobro (rabljeno), Formid Limited is a roll forming line equipped with an electrically extendable support system for roll forming sets up to 800 mm. The system is manually driven via an angular gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft spacing 145 mm. Kwodpfewxv Izjx Abbst Centre-to-centre distance 250 mm. Minimum shaft distance of 200 mm to each other and 800 mm apart. Driven by a 380-volt electric motor with 15 kW output. The line is suitable for profiles with frequently changing centre widths. It is equipped with centre roller supports to maintain the lower layer of the steel strip, which in turn supports the substrate of the profile strip within a defined profile. This system also includes 16 stations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 229, skupna širina: 500 mm, skupna dolžina: 600 mm, skupna višina: 1.200 mm, število ravnalnih valjev: 5, Stroj za obročkanje profilov: navijanje – upogibanje – ravnanje / Dimenzije profilov po prilogi (glej fotografijo) Kwjdpjxrflmsfx Abbjt

Stanje: novo, Angle iron/leg length / mm Double-T iron (H-beam) along x-axis / mm U-channel along x-axis / mm Total power requirement / kW Machine weight approx. 1000 kg Space requirement approx. 1200 x 850 x 1200 mm The Gerd Wolff HPK-65 is a hydraulic section and tube bending machine with 3 rollers. The machine is ideally suited for bending sections, tubes, and similar materials. Model: HPK 65 Upper shaft diameter: Ø 60 mm Kwsdpfew Nbmpex Abbet Lower shaft diameter: Ø 50 mm Roller diameter: Ø 180 mm Working speed: 6 m/min Motor power: 3.75 kW / 380 V Dimensions (L x W x H): 1200 x 850 x 1200 mm Weight: 1000 kg Standard equipment: • Welded steel construction • 3 powered rollers • Hardened and ground shafts made of high-strength special steel • Horizontal and vertical working positions • Hardened standard rollers • Mobile control panel • Mechanical lateral guide rollers with 3 axes • Braking motor for precise bending • Digital displays (2 pcs) Optional equipment: • NC control • Hydraulic lateral guide rollers (2 axes) • Spiral bending attachment • Special rollers for sections

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Stroj za profiliranje parketa po vzdolžni strani 5+5 motorjev Kjdpfx Aboxwnhbebowt Hitrost do 60 m/min Minimalna delovna širina 70 mm (65 mm brez posnetja) Diamantna orodja za T&G profil + dovodni tračni transporter

Stanje: rabljeno, Leto izdelave: 2001, skupna dolžina: 1.200 mm, skupna širina: 800 mm, skupna višina: 1.700 mm, Unladen weight: 500 kg Kjdpfxjwu Tnke Abbjwt 3 driven rolls (brake motor) Hardened drive shafts Hydraulic adjustment of the top roll Hardened universal rolls Side guide rolls manually adjustable in one axis Usable in horizontal and vertical positions Foot pedal for forward and reverse operation - Year of manufacture: 2001 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 371 - Control: Conventional - Vertical/Horizontal: Horizontal and Vertical - Number of rolls [pcs]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (L x W x H) - Transport weight [kg]: 500kg - Number of transport packages [pcs]: 1 Financial Information: VAT: The specified price is exclusive of VAT VAT/margin scheme: VAT can be deducted for businesses Delivery and trade-in possible at any time for all types of industrial equipment Lukas van Rossum