Krivljenje Jeklene nakup rabljenega (356)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Dkedjypbquepfx Ah Sei Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Dodsypbqnopfx Ah Soki Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Dkodpfxoypbqho Ah Sji Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Dksdpoypbqbsfx Ah Sji Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Dkjdpfx Asypbp Rsh Sei Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Djdpfxsypbp De Ah Sski Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Valjarna za pločevino, kapaciteta 3000 mm, H. Vuillot 3000 mm, rabljeni stroj Proizvajalec: H. Vuillot Kapaciteta pločevine: 3000 x 27 mm Premer zgornjega valja: Ø445 mm Dsdpfx Ahowcqpne Seki Premer spodnjih valjev: Ø330 mm Leto izdelave: 1972

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Hidravlične profilne in palčne škarje, profilne škarje, Peddinghaus 210/25s, rabljeni stroj Proizvajalec: Peddinghaus Model: 210/25s Prebijalna kapaciteta: Ø40 mm luknja v 25 mm debeli plošči Dodpfjwcqmaex Ah Seki

Stanje: rabljeno, Alignment and welding plate, made of cast steel and cast iron, heavily ribbed Formerly used as marking-out plate and measuring plate Heavy-duty straightening plate Length: 1000 mm Width: 1000 mm Thickness: 230 mm Working height: 970 mm Continuous plate thickness: 38 mm - Metal base frame Weight: 450 kg Dsdpfxjdzqr Ao Ah Sjki

Stanje: rabljeno, Straightening and welding plate, steel and cast iron, heavily ribbed Former marking and measuring plate Heavy-duty straightening plate Length: 1000 mm Width: 800 mm Thickness: 250 mm Working height: 820 mm Plate thickness: 30 mm throughout Dksdpfx Asdzqrpjh Soi - Height-adjustable metal base Weight: approx. 400 kg Surface rusty

Stanje: rabljeno, Straightening and welding plate, cast steel/grey cast iron, heavily ribbed Dodjdzqrbepfx Ah Sjki Heavy-duty straightening plate Length: 2000 mm Width: 1600 mm Thickness: 110 mm Working height: 600 mm Plate thickness: 30 mm (continuous) Weight: approx. 1000 kg Good condition, good surface

Stanje: rabljeno, Cast steel/cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 3050 mm Width: 2000 mm Thickness: 300 mm Plate thickness: approx. 55 mm throughout Weight: approx. 4.5 tons Good condition Dkjdpfx Ahsflt Ece Ssi

Stanje: rabljeno, Straightening and welding table, steel/cast iron, heavily ribbed Dsdpodzqq Ujfx Ah Sjki Length: 2000 mm Width: 1200 mm Thickness: 150 mm Working height: 800 mm Plate thickness: 35 mm - Base made of solid wood Weight: approx. 950 kg Good surface condition

Stanje: rabljeno, Straightening and welding plate, cast steel/cast iron, heavily ribbed Former marking and measuring plate Dksdpfx Aeu Swb Ish Sji Heavy-duty straightening plate Length: 2000 mm Width: 1000 mm Thickness: 260 mm Working height: approx. 850 mm Plate thickness: approx. 40 mm throughout - 5 height-adjustable feet Weight with feet: 1250 kg Good condition

Stanje: rabljeno, Straightening and welding plate, cast steel/grey cast iron, heavily ribbed former marking and measuring plate heavy-duty straightening plate Length: 2000 mm Width: 1000 mm Thickness: 160 mm Working height: 850 mm Plate thickness: approx. 35 mm throughout - 3 pieces height-adjustable feet Weight with feet: 680 kg Dkodpfx Asu Inwfoh Sei in good condition

Stanje: rabljeno, Cast steel/cast iron straightening and welding plate, heavily ribbed heavy-duty straightening plate Length: 1985 mm Width: 1000 mm Dodpfx Ahokpwuxo Soki Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm throughout - 4 height-adjustable feet Weight: 1050 kg

Stanje: rabljeno, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of table clamping plate: approx. 3100 mm Table height / construction height: 1050 mm Table load capacity: max. 20 tons Ball screw: Ø 100 mm Lead: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic guideway cover - From a DROOP & REIN portal milling machine Dsdpfx Aothuzpjh Seki - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots (28 mm) - Drive via SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Construction height: 1050 mm Net weight: 28 tons Good condition

Stanje: rabljeno, Measuring and Scribing Plate, Steel Cast/Grey Cast Iron, Heavy-Duty Ribbed, STIEFELMAYER Previously part of a measuring machine with a manually operated measuring arm High-precision surface plate with excellent surface quality Machine No. 8530979, Year of manufacture approx. 1989 Length: 5000 mm Width: 2000 mm Thickness: 350 mm Dedpeftpl Dofx Ah Sjki Working height: 690 mm Plate thickness: 50 mm throughout - 15 height-adjustable feet - Highly precise and stable longitudinal guides, bolted to the side of the plate Space requirement (L x W x H): 5000 x 2120 x 400 mm Weight: approx. 7500 kg Excellent surface quality

Stanje: rabljeno, Straightening and welding plate, cast steel or cast iron, heavily ribbed Heavy-duty straightening plate Dedpfx Ahjdzqbao Sjki Length: 1600 mm Width: 1005 mm Thickness: 280 mm Plate thickness: approx. 85 mm, continuous - Center hole: Ø 245 mm, 400/800 mm - Threaded holes M20, approx. 55 mm deep - Through holes Ø 27 mm Weight: approx. 2.5 tons Good condition Former press table – presumably machined parallel on both sides

Stanje: rabljeno, Clamping plate with T-slots made of cast steel/gray cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length: 1850 mm Width: 915 mm Plate thickness: 230 mm Table surface with T-slots: 1030 x 750 mm - Clamping surface with 22 mm T-slots, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled so the ribs rest flat and provide support - Ideal as a base plate Dedpjh R D Uzsfx Ah Sjki Net weight: 1140 kg Good condition

Stanje: rabljeno, Straightening and welding plate, cast steel/grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm - Very robust steel table frame (custom-built) - Plate with underframe movable by pallet truck Dkodpfeqvq Ucox Ah Sji Weight: 740 kg Good condition

Stanje: rabljeno, Measuring machine with hand-guided measuring arm STIEFELMAYER Measuring and marking plate made of high-grade cast steel/grey cast iron, heavily ribbed High-precision measuring plate with a good surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Dkedopwpxcepfx Ah Ssi Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - Equipped with a manually movable measuring arm, measuring range X = 1490 mm, Y = 1000 mm, Z = 1250 mm - 3-axis digital readout unit Grundig MZ 1030 - Machined side surface at a 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg Good condition

Leto izdelave: 2000, stanje: rabljeno, 2000 M.A.C. SN-OL 1230x650-10T Preša za upogibanje lesa Delovne dimenzije: 1230 x 650 mm Tlačna moč: 10 ton Dedpoychqhjfx Ah Sski Moč motorja: 5,5 kW

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 000464, Max. pipe diameter: Ø 42 mm (1.654 in) Min. pipe diameter: Ø 6 mm (0.236 in) Max. wall thickness: 2.5 mm (0.098 in) Max. bending radius: 270 mm (10.63 in) Min. bending radius: 25 mm (0.984 in) Throughput: 42; Bending angle: 187°; Digital display: yes; Dkjdpfx Ahovmpbre Sei Motor power: 7.5 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Length: 4700 mm; Width: 800 mm; Height: 1300 mm;

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Hari, We offer the following services, DIN EN 1090 / EX-3 Steel Construction Planning and consulting in the design, as well as manufacturing and assembly of all types of steel structures for industry, commerce, and public institutions. A high standard of quality is our commitment in all our operations. Our services include: • Metalworking and locksmith services of all kinds • Canopies and roof coverings • Platform structures • Railings of all types • Window grilles, decorative grilles, gratings • Custom steel and stainless steel structures • Staircase constructions, escape stairs • Repairs Welding Services With extensive expertise and advanced technical equipment, we are your reliable partner for demanding welding work. Our range of services includes: • MIG / MAG • TIG • Electrode • Oxy-fuel Interior Fitting From consultation, site measurement, and planning to turnkey handover, we provide reliable and expert support. • Remodeling / drywall construction • Renovation of older buildings • Free on-site inspection • Painting works • Tiling Dksdpfx Aeu Szvaoh Sji • Doors • Ceiling systems / suspended ceilings • Lighting