Mikron Wf 31 nakup rabljenega (188)

Stanje: rabljeno, Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw Lhodpfx Aekvrqijdkod - Manufacturer: Mikron, ball screw drive from CNC milling machine Mikron WF 51C/155 - Thread length: 540 mm - Shaft: Ø 32 mm - Dimensions: see photos - Overall size: 870/140/H130 mm - Weight: 18 kg

Stanje: dober (rabljeno), Motor s trajnim magnetom, trajni magnetni motor, elektromotor, n-Mot, motorji s trajnim magnetom, servomotor, motor z zobniškim prenosom, elektromotor, trofazni motor - Proizvajalec: Siemens, motor s trajnim magnetom iz CNC rezkalnega stroja Mikron WF 51C/155 - Tip: HU3074-,0AC01-Z - Napetost: 167 V - Moč: 1,8 kW Ljdokxhpuspfx Adkehd - Hitrost: 2000 obr/min - Gred: Ø 22 x 45 mm - Količina: na voljo 2 motorja - Cena: na kos - Dimenzije: 390/140/H185 mm - Teža: 23 kg/kos.

Stanje: dober (rabljeno), Servo drive, servo card, input processor, control card, input card, controller, converter, controller, servo module, axis amplifier, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier - Manufacturer: Bosch, fully-equipped transistor amplifier from CNC milling machine Mikron WF 51C/155 - Type: TR15-XA-140-230V - Control cards/individual modules: see photos - Dimensions: 480/260/H365 mm Lhjdpfxewd N S Ds Adkjd - Weight: 24 kg

Stanje: rabljeno, Inrush current limiter, soft starter, softstarter, starting current limiter, soft start choke - Manufacturer: varimax, soft start choke/three-phase reactor removed from CNC milling machine Mikron WF 51C/155 Ledpfxokzpngs Adkohd - Type: D 1515 S3 - Current rating: 10 A - Dimensions: 180/90/H190 mm - Weight: 9.5 kg

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Lhjdpfxeu U Sabe Adked Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: dober (rabljeno), Transformer, trafo, converter, three-phase autotransformer, three-phase transformer Lhedpfx Adokzpmueked -Manufacturer: Trasfor, transformer/trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see nameplate photo -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 956.71.80.288, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, model krmilnika: HEIDENHAIN TNC 150, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj je na dražbi zaradi prenehanja poslovanja podjetja. Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik po X-osi: pribl. 300 mm Pomik po Y-osi: pribl. 300 mm Pomik po Z-osi: pribl. 300 mm Orodni vpenjalni stožec: SK 40 Dimenzije mize: 1.000 x 500 mm, s 7 utori Lhjdpfx Aoxqg Itedkjd PODROBNOSTI O STROJU Krmiljenje: HEIDENHAIN TNC 150 Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 25 A Priključna moč: 10,5 kW Mere & teža Mere (D x Š x V): 2.500 x 2.400 x 2.200 mm Teža: 2.000 kg OPREMA Dokumentacija Vpenjalne glave Set končnih mer

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Lsdpfx Aolnfggedkshd Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Lodpfx Adscxxq Dokohd Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Ledpfx Aetqqplodkjhd Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, TECHNICAL DATA Lhodpfjuhbxaex Adksd - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travel (X, Y, Z): 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis HEIDENHAIN digital readout - Chip guard

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 350 mm Table size: 800 x 450 mm Spindle taper: ISO 40 Lhedpfx Adotv Ia Tskjd Quill stroke: -- mm Feeds – longitudinal & cross: -- mm/min Feeds – vertical: -- mm/min Max. spindle speed: 3,150 rpm Supply voltage: 380 V / 50 Hz Drive power: 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Stanje: rabljeno, x-hod 400 mm y-hod 400 mm z-hod 400 mm Krmiljenje Heidenhain Hitrost vrtenja 3150 min⁻¹ Dimenzije mize 700x350 mm Nosilnost mize 400 kg Vpenjalo vretena ISO 40 Tehnični podatki so podatki proizvajalca oz. uporabnika, zato zanje ne prevzemamo odgovornosti. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnega prostora, dvižna kapaciteta žerjava 70 t več kot 10.000 artiklov pribora za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Lhjdpeyutv Hsfx Adkjd Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Mikron WF2S universal milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angle table, SK 40 spindle taper. Machine is in very good, ready-to-operate condition, from a research institute. Can be demonstrated under power by prior arrangement. Lhodpjg Nw Rzofx Adkjd

Stanje: dober (rabljeno), Maszyna jest dostarczana z uchwytami narzędziowymi. Lodpfx Adjvk Ng Askshd

Stanje: rabljeno, številka stroja/vozila: 152.00.80.20, Universal machining centre, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine - Clamping table: 800 x 445 mm - Travel (X/Y/Z): 500/500/385 mm - Spindle mount: SK40 - Quill stroke: 90 mm - Spindle speeds: 31.5 to 3,150 rpm - Coolant system Lhjdpfx Adefbma Nokjd - Dimensions (L/W/H): 1,475 x 1,770 x 2,000 mm - Weight: 1,966 kg

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za povrat energije -Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 50A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0CA0 Ledpfsrb E Hbsx Adkohd -Dimenzije: 290/50/H480 mm -Teža: 6,8 kg

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za vračanje energije Ljdpfxjrb E Hfj Adkehd -Proizvajalec: Siemens, LT-modul Simodrive 611 INT. 2X15A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AB00-0AA0 -Dimenzije: 290/50/H480 mm -Teža: 5,8 kg

Stanje: dober (rabljeno), Krmiljenje SPS, močnostni modul, LT-modul, E/R-modul, povratni modul -Proizvajalec: Siemens, Simodrive 611 LT modul INT. 25A iz CNC rezkalnega stroja Mikron UME 600 Lhedpfx Adsrb E Hqsked -Tip: 6SN1123-1AA00-0BA2 -Dimenzije: 290/50/V480 mm -Teža: 5,8 kg

Stanje: dober (rabljeno), SPS krmiljenje, napajalni modul, LT-modul, E/R-modul, modul za vračanje energije -Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 2X25A -Tip: 6SN1123-1AB00-0AA1 Lhodewcyq Iepfx Adksd -Krmilna enota: 6SN1118-1NH00-0AA1 -Količina: 7 modulov na voljo -Cena: na kos -Dimenzije: 290/50/V480 mm -Teža: 6,3 kg/kos

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, regenerativni modul - Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 2X25A - Tip: 6SN1123-1AB00-0BA1 - Krmilna enota: 6SN1118-1NH00-0AA1 - Količina: na voljo 3 moduli - Cena: na kos - Dimenzije: 290/50/V480 mm Lhedpfowcyngox Adkod - Teža: 6,4 kg/kos

Leto izdelave: 2018, stanje: rabljeno, Computer monitor, screen, TFT industrial monitor - Monitor: TFT industrial monitor removed from CNC milling machine Mikron UME 600 - Model: 12.1" TFT industrial monitor 2363130 - Dimensions: 400/320/100 mm - Weight: 3.1 kg Lhjdpfx Adjrcnmzskod

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 956.71.80.274, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 400 mm, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 400 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. It is sold together with a vise and includes a tool cabinet with the contents as shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (partially lightly used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Lhedpfjwnq Sgjx Adkjd

Leto izdelave: 1987, stanje: dober (rabljeno), Mikron WF2SA tool milling machine with 3-axis Heidenhain Aktiv digital readout. Fixed angle table, SK 40 spindle taper. In operational condition. The machine can be demonstrated under power by prior arrangement. Lhodpjqttt Tofx Adksd

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Lhedpfjxu Hkcsx Adked Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.