Mikron Wf 2 Sa nakup rabljenega (192)

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Z 500 mm Iedpjwx Rafsfx Ah Astr 10.000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Iedpfjwy I Tlex Ah Aotr Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Isdpfx Ajt I T N Eeh Aotr Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – subject to error. Payment: As customary for used machines, strictly net before collection.

Stanje: dober (rabljeno), Mikron C-Axis Machine Table - Equipped with Heidenhain 430 control - Siemens servo motor - Table size: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Itodpfx Ahjic Rvie Asr Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: As a basic principle, I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to buying in order to avoid ambiguities. For general inquiries or to arrange an appointment for inspection, I am available at any time via the phone number listed below or above. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight forwarding company.

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm Itedpelu N Hiofx Ah Aor y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 1.889 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 860 mm, pomik osi Y: 560 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, Obdelovalni center s samo 1889 urami vretena! TEHNIČNI PODATKI Pomiki Pomik X-os: 860 mm Pomik Y-os: 560 mm Pomik Z-os: 600 mm Podatki o vretenu Maks. hitrost vrtenja vretena: 10.000 min⁻¹ PODROBNOSTI O STROJU Ure vretena: 1.889 h Ure vklopa: 42.782 h Itsdpsw Ngmuofx Ah Asr Število krmiljenih osi: 3 Model krmiljenja: HEIDENHAIN iTNC530

Stanje: dober (rabljeno), Leto izdelave: 2015, Stroj je v dobrem stanju, prikazani deli, ki so prikazani ročno, niso vključeni. X: 1025 mm Y: 560 mm Z: 600 mm Itedpfx Ahjwx N Nfe Ajr Heidenhain TNC 620, 16.000 vrt/min, HSK 63

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Pomik osi X: 1200 mm Pomik osi Y: 600 mm Pomik osi Z: 675 mm Hitrost vrtenja delovnega vretena: 30 - 8000 min⁻¹ Nosilec orodja: ISO B 40 Pomik X/Y/Z: 3000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min PODROBNOSTI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Ijdow Iqf Sjpfx Ah Astr Krmilna napetost: 24 V DC Priključena moč: 16 kW Teža: 8000 kg

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Max. spindle speed: 15,000 rpm Tool Data Tool magazine: 46 stations Tool holder: ISO-B40 Travel Axes X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control unit: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Itjdpfsw Hq Ifjx Ah Asr Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D touch probe Note: The tool holders shown in the photos are included in the scope of delivery. However, the tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale. The drive for the head tilting axis is missing.

Stanje: rabljeno, ACCESSORIES - Equipped with Automat type Zellio SR3 - Includes tilting loading magazine No. 11 and vibrator Isdsuhbqpspfx Ah Aetr - Piece diameter: 2.50 to 12.5 [mm] - Piece length: 0.30 to 30 [mm]

Stanje: rabljeno, Leto izdelave: 1995, x-travel 750 / 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Machine weight approx. 6,500 kg Space requirement approx. 2500 x 3300 x 2500 mm MIKRON VC 750/1000 – CNC Vertical Machining Centre Travels: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1080 x 580 mm Isdpowm Rqysfx Ah Ajtr Number of T-slots: 7 T-slot pitch: 90 mm T-slot width: 14 mm Max. table load: approx. 1,000 kg Spindle: Spindle speed: 50 – 5,000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool Changer: Number of tool stations: 30 – 36 Tool taper: ISO 40 Feed and Rapid Traverse: Rapid traverse X/Y/Z: approx. 15 m/min Control: Heidenhain TNC 426 Machine dimensions and weight: Dimensions (L x W x H): approx. 2500 x 3300 x 2500 mm Weight: approx. 6,500 kg

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Itsdpfxsw Sxyxj Ah Ajr

Stanje: dober (rabljeno), Teile auf dem Tisch sind nicht enthalten. Mit Rot markiert. Iedewxdyxspfx Ah Astr

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Stroj je v dobrem stanju, ročno prikazani deli niso vključeni v komplet. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 obr./min, HSK 63 Itedpsw Dbt Tofx Ah Asr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Isdpjwm I N Hjfx Ah Aetr Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 29.655 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 73.110, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 700 mm, širina mize: 1.100 mm, obremenitev mize: 1.600 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 92, Kot zasuka osi A (min.): −120 °, zasukni kot osi A (maks.): 16 °, Insolvency auction – all machines fully functional and ready for demonstration. Property of a German GmbH. TECHNICAL SPECIFICATIONS X-axis (Longitudinal): 1,350 mm Itjdpfovxr I Eox Ah Asr Y-axis (Transverse): 1,150 mm Z-axis (Vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and Traverse Speeds X and Y axes: 15 / 30 m/min Z-axis: 15 / 30 m/min A-axis: 11 / 20 rpm C-axis: 40 rpm Work Table Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine weight: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise emission level: 68 dB(A) Operating hours: 34,205 h Spindle hours: 29,655 h EQUIPMENT - Without magnetic table

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Space requirements approx. 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, specifically designed for the high-precision machining of complex workpieces. With its robust construction, powerful spindle, and reliable Heidenhain control system, it meets the highest standards for both single-part and series production. All information without guarantee. Detailed technical specifications available upon purchase. Control: TNC 426/430 Travel distances Itodpfxjwmzgfo Ah Asr X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot pitch: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool interface: HSK-A63 Tool changer Number of tool stations: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent stations free: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and rapid traverse Feed speed: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, X-axis: 600 mm, Y-axis: 500 mm, Z-axis: 540 mm, maximum table distance: 690 mm, feed rate: 40 m/min, table dimensions: 700 x 500 mm, maximum workpiece weight: 800 kg, control system: Heidenhain TNC 620, connected load: 18 kVA, length: 2,240 mm, width: 3,338 mm, height: 2,803 mm, weight: 5.6 t, supplied with documentation, has seen little use. Itedov Hndfspfx Ah Asr

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Itsdpfx Aewk Nm Ish Asr Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. 10.000 min⁻¹

Stanje: pripravljen za uporabo (rabljen), Prodam dobro ohranjeno rezkalno stroj Mikron VC 1000 zaradi nakupa novega stroja. Itedpfx Ahoh Tnpxo Asr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 21.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 84.34, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 700 mm, širina mize: 1.000 mm, obremenitev mize: 1.100 kg, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, Kot zasuka osi A (min.): −120 °, zasukni kot osi A (maks.): 16 °, Insolvency auction – all machines in working order and available for demonstration. Property of a German GmbH. TECHNICAL DETAILS X axis (longitudinal): 1,000 mm Y axis (transverse): 1,150 mm Z axis (vertical): 700 mm A axis: +16° / -120° C axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and Traverse Speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work Table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine weight: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Sound pressure level: 68 dB(A) Program run time: 40,095 h Spindle hours: 21,967 h EQUIPMENT Itjdpfxevxr Ilj Ah Ajr - Without magnetic table

Stanje: rabljeno, Leto izdelave: 2000, X-travel 1000 mm y-travel 1040 mm Itodpfotig D Iex Ah Aor z-travel 750 mm Control: Heidenhain TNC 426 Spindle speed: 15,000 rpm Total power requirement: 40 kW Machine weight approx. 10.1 t Required space approx. / m Including handwheel and documentation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, spindle speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Itsdpfow Exr Aex Ah Aor

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, Shown spare parts by hand are not included. Pallet changer EROWA is not included. Ijdpfxem Dtnro Ah Aotr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Ijdew Emx Repfx Ah Aotr