Mep Willy 225 nakup rabljenega (129)

Leto izdelave: 2001, stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices - Automatic material feed with position control - Single stroke up to approx. 1000 mm Kedped Aai Tofx Adkoww - Multiple stroke - Swiveling operator panel with CNC control MEP - Motorized dust extraction + mobile chip extraction - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter Kodefg E H Ejpfx Adksww - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with Kjdpfx Adsfg E Hyskeww semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! • Hydraulic fully automatic bandsaw • Mitre cuts up to 60° to the left possible Ksdpfsfg E H Dex Adkoww • Saw blade length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Kwodpfx Adjfg E H Ijkew Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Kwedofm T Hbopfx Adksw Price on request.

Stanje: novo, Cutting diameter (round): 355 mm Kwedpfx Ajfg E Hzsdksw Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Leto izdelave: 1995, stanje: rabljeno, Maks. premer žaginega lista: 400 mm Kjdpfexf Hb Nex Adksww Pnevmatske vpenjalne naprave za material

Leto izdelave: 2003, stanje: rabljeno, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Kedpfxjra Rrlj Adkoww Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, premer žaginega lista: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was manufactured in 1998 but is in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution. Machine features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Blade diameter: 300 mm Kwodpfx Aev Tlcrjdkow Cutting capacity: Suitable for round stock, square profiles, and mitre cuts Cutting angles: 90° and 45°, with mitre cutting in both directions Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant supply: Integrated cooling system ensuring better cutting quality and extended saw blade life

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Kedpfx Adofg E Iaoksww Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Kwsdpfx Adsfg E Ibjksw Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm Kwodpfsfg Rldsx Adksw • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: novo, Saw blade diameter: 130 mm Cutting capacity at 90° (round): 130 mm Cutting capacity at 90° (square): 120 mm Cutting capacity at 90° (flat): 180 x 100 mm Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Kedpfxehpktys Adkjww Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw designed for use with carbide saw blades, suitable for serial cuts from 45° right to 60° left.

Stanje: novo, Cutting diameter: 250 mm Kjdjfg E H Rjpfx Adkjww Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 115 mm Cutting capacity at 90 degrees, square: 100 mm Cutting capacity at 90 degrees, flat: 130 x 80 mm Cutting capacity at 45 degrees, round: 100 mm Cutting capacity at 45 degrees, square: 85 mm Cutting capacity at 60 degrees, flat: 90 x 80 mm Clamping range: 130 mm Speed: 30 / 60 rpm Saw blade dimensions: 350 x 32 x 2.5 mm Total power requirement: 1.1 / 2.2 kW Machine weight approx. 0.22 t Space requirement approx. 1200 x 860 x 900 mm Manual chop saw for miter cuts from 45° left to 45° right. Steel worm gear, double ball bearing mounted Saw blade shaft mounted on an eccentric made of spheroidal cast iron Bronze gear wheel with key and conical clutch for maximum power transmission to the steel worm gear Vice with adjustable guide strips Adjustable anti-burr device (enables burr-free cutting) Length stop Double return springs Main safety switch Emergency stop button Kwsdpfxsfmck Hs Adkow Speed selector switch Electric coolant pump for lubrication and cooling of the saw blade (option to fit a micro-spray unit) Motor 1.5/1.8 kW - 400 Volt Optional base frame €361

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 105 mm Cutting range at 90 degrees: flat 180 x 70 mm Cutting range at 45 degrees: round 120 mm Cutting range at 45 degrees: square 100 mm Cutting range at 45 degrees: rectangular 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminum materials and light metal alloys, equipped with an electro-welded, carbide-tipped saw blade. Ksdpfxsfc T Uge Adkjww Machine designed for miter cuts from 45° right to 45° left. Thanks to the adjustable vertical orientation, it is possible to perform cutting operations with a head inclined between 0° and 45° to the left.

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120/110 mm Cutting range at 45° (square): 10/95 mm Cutting range at 45° (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, circular saw automatic machine with semi-automatic function, for sawing aluminium and light metal alloys, designed for use with carbide-tipped circular saw blades. Machine suitable for mitre cuts from 45° right to 45° left. The vertical axis alignment allows for sawing operations with the head inclined from 0° up to 45° to the left. Numerically controlled circular sawing machine equipped with a new Windows CE-based control system, specially developed by MEP for automatic machines. Ksdpfofg Rlgox Adkoww

Stanje: rabljeno, Leto izdelave: 1999, Premer žaginega lista 275 mm Območje reza pri 90 stopinjah: okroglo 80 mm Območje reza pri 90 stopinjah: kvadratno 70 mm Območje reza pri 90 stopinjah: ploščato 100 x 60 mm Območje reza pri 45 stopinjah: okroglo 70 mm Območje reza pri 45 stopinjah: kvadratno 60 mm Območje reza pri 60 stopinjah: ploščato 80 x 50 mm Kwsdol R Nnnopfx Adkow Območje vpenjanja 110 mm Število obratov 45 / 90 vrt/min Skupna potrebna moč 0,5 kW Teža stroja cca 0,07 t Potrebna prostora cca 900 x 700 x 1600 mm Ročna hladna krožna žaga z: - Strojno podnožje - Podporno letev 1500 mm

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. Kwodpfx Adsfg E H Ujkjw - New generation, highly efficient hydraulic control unit with low energy consumption. - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual band speed (40/80 m/min.) with control - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 120 mm Cutting capacity at 90 degrees, square: 105 mm Cutting capacity at 90 degrees, flat: 180 x 70 mm Cutting capacity at 45 degrees, round: 120 mm Cutting capacity at 45 degrees, square: 100 mm Cutting capacity at 45 degrees, flat: 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium, capable of mitre cuts from 45° right to 45° left, with saw head swivelling from 0° to 45° to the left. On the COBRA 352 MA version (with automatic vice), the vices close automatically when the saw head is lowered. • Roller-guided rotary table for fast and precise mitre adjustment • Screw lock for fixing the saw head at any angle • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head locking in upper position • Adjustable length stop for repetitive cuts of identical length Kwjdpfx Ajfc T Ufjdkow • Vice opening: 180 mm

Stanje: novo, Cutting diameter: 300 mm Kwodpfx Adjfg E H Tjksw Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Vice: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual operation, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At the start of the cycle: – Vice closes, motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position, then starting the cycle via hand button). Some features: - New centralised control panel on an articulated arm for easy operation from any working position. - Low-voltage operating panel: - Polyester membrane keypad with thermoformed, raised buttons and actuation control signal. - Display shows: * Diagnostics (messages in the user’s language) Ksdpfx Adsfg E H Sokjww * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time used for completed cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position - IP55 manual 24 V cycle switch lever - Complete program for all special cutting cycles - Possibility to define other special cutting cycles for specific applications - New, latest-generation hydraulic control unit, highly efficient and energy-saving - Large work surface with turntable on roller bearings (265 mm), fitted with preloaded thrust bearing - Dual band speed (36/72 m/min.) with control panel - Prepared for installation of an electronic inverter for stepless band speed regulation from 20 to 90 m/min. - Adjustable saw head stroke controlled directly from the panel to adapt to the workpiece height - Clamping device can be shifted laterally left and right, featuring quick-action vice - Manual blade tension control, display on screen via electronic converter - Machine base with pull-out coolant tray - Electric coolant pump for saw blade cooling and lubrication - Prepared for installation of optional minimum-quantity lubrication system, in addition to the standard emulsion oil lubrication - Swarf removal brush - Machine suitable for pallet truck transport - Length stop for repetitive cuts - Material support arm with roller, to attach loading table - Bimetal saw blade for solid and profile material - Tools and user manual in the language of the operator

Stanje: novo, Leto izdelave: 2024, * Manual cutting cycle Kwjdpfxjftmxvo Adksw * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via compensation spring * Robust, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, center-axis located and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles * Quick-adjusting vice * Carbide band guides for highest cutting precision * Hydraulic unit for saw blade tensioning and monitoring, with display on manometer * Clearly arranged control panel with all operating elements * Machine base, coolant tray, coolant pump, and swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw blade dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 mm / right mm * Cutting capacity at 45 degrees: square left 200 mm / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Stanje: dober (rabljeno), največja višina reza: 330 mm, Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Kodpfxett Nd Rs Adksww Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm