Maka Hc 57 R nakup rabljenega (49)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
MAKA
Več rezultatov:
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAPM 270 R
Klic
Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Used Machine MAKA PM 270 R
5-Axis CNC Machining Center for processing wood, plastic, and aluminum.
Gantry design with rack and pinion drive.
Year of manufacture: 2001
Technical Data:
CNC control BWO 900C for 5-axis machining.
Integrated PC with 1MB memory and 3.5" floppy disk drive.
Mobile operator console stand.
Working areas in 5-axis operation, with tool Ø 60 / length 160 mm:
Y-axis: 5,600 mm
X-axis: 1,350 mm
Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups)
Working areas in 3-axis operation, with tool Ø 60 / length 160 mm:
Y-axis: 6,000 mm
X-axis: 1,350 mm
Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups)
A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°)
Rapid traverse X/Y-axis: 45 m/min. Z-axis: 24 m/min. A/B-axis: 10 m/min.
Milling Unit:
- 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, infinitely variable speed up to 17,000 rpm, spindle water-cooled.
- 1 NC height-adjustable chip extraction system with lamellar curtain.
Tool Magazine:
- Tool interface ISO 40 for automatic tool changing system.
- 1 chain-type tool magazine with 32 slots for tools up to D = 90 mm, sorted storage up to max. 160 mm (three slots required).
Machine table:
- 10 support tubes on linear guides with pneumatic release device for rapid positioning.
- 2 control circuits for stops "raise / lower"
- 2 control circuits for slide bar "raise / lower"
- 2 control circuits for pneumatics "clamp / release"
- 2 vacuum control circuits with button for clamping and automatic reset via CNC programming.
- 1 chip conveyor integrated into the base frame for transporting chips and small offcuts up to approx. 100 x 100 x 100 mm.
Tools:
Tools are not included! Delivery can include various tool holders upon agreement. We would be pleased to provide you with a separate offer.
Lodpfxjvmywqo Abbehb
Vacuum System:
- 1 vacuum pump, approx. 140 m³ suction capacity, including 250 L tank for rapid vacuum build-up.
- 10 vacuum supports with various suction pads.
- Various clamping devices for posts and curved elements.
- Stops raise / lower for workpiece positioning.
Miscellaneous:
- Automatic central lubrication system.
- Control cabinet with climate control unit.
- Projection laser
Occupational Safety:
- Moving protective cabin with safety bumpers on the operator side.
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAFPM 470 R
Klic
Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R
5-axis CNC machining center for processing wood, plastic, and aluminum.
Gantry design machine with rack and pinion drive.
The machine was last used in wooden staircase construction.
Year of manufacture: 1999 // RETROFIT in 2019
Technical specifications:
CNC control BWO Vektor 921 for 5-axis machining.
256 MB NC memory, USB connection, mobile control panel.
Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm:
Y-axis: 5,600 mm
X-axis: 1,600 mm
Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups)
Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm:
Y-axis: 6,000 mm
X-axis: 1,600 mm
Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups)
A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°)
Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min.
Milling unit:
Lhedpfx Abovmpx Rebsb
- 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled.
- 1 CNC height-adjustable chip collection system with lamellar curtain.
Tool magazine:
- Tool interface ISO 40 for automatic tool change system.
- 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this).
Machine table:
- 10 support tubes on linear guides with pneumatic release device for quick positioning.
- 2 control circuits for stops "raise/lower"
- 2 control circuits for pneumatics "clamp/release"
- 2 vacuum control circuits with button for clamping and automatic reset via CNC programming.
- 2 stepped separating devices, lift approx. 320 mm.
- Various clamping devices for posts and curved parts.
- 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm.
Tools:
Tools are not included in the scope of delivery!
Vacuum supply:
- 1 vacuum pump including a 250-liter tank for rapid vacuum build-up.
- approx. 20 vacuum supports with various suction plates.
- 4 stops raise/lower for positioning components.
Miscellaneous:
- Automatic central lubrication.
- Control cabinet with air conditioning unit.
- Projection laser.
Occupational safety:
- Traveling safety cabin with safety bumpers.
Overhaul / repairs in 2018 / 2019:
- Conversion of the rotary and swivel axes to a new generation of drives (digital).
- New energy chains for Y / X / Z axes.
- Complete rewiring, all power and measuring system cables replaced.
- All guide carriages replaced.
- Z-axis ball screw and guide rails new.
- X-axis guide rail new.
- Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory.
- New vacuum valves and vacuum hoses.
- 2 tool magazines + tool changers overhauled.
- Swivel extraction unit overhauled.
Software:
- It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAHC-55-TBZ
Klic
Stanje: rabljeno, Leto izdelave: 2000, Used Machine
MAKA CNC Door Processing Center HC 55 TBZ
Year of Manufacture: 2000
Door processing center for machining interior doors (hardware recessing, light cut-outs, peephole milling, etc.)
CNC control BWO 900C, with 1 MB memory, integrated PC.
Working ranges:
for door width: 250 – 1,280 mm
for door height: max. 2,500 mm
for door thickness: max. 80 mm
Rapid traverse speed:
X-/Y-axis 45 m/min.
Lsdpfx Absv S Dn Debjhb
Z-axis 10 m/min.
1 universal milling unit SK40
with integrated A swivel axis 190° (+/- 95°), in X-axis direction for lock/hinge processing on both sides along the door edge directly with the unit.
Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, speed infinitely variable from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change.
1 chain tool magazine with 24 stations, for tools up to Ø 90 mm, with sorted storage up to max. Ø 160 mm, arranged at the unit exit position. Max. tool length 200 mm from spindle mount.
Milling spindle and 2 magazine stations set up for use of angle/probing heads with torque support.
Machine table with programmable width adjustment and width measurement for processing with edge bander for consistent milling depth on both sides.
1 set of infeed rollers for manual loading, automatically liftable and lowerable.
1 longitudinal stop with pneumatic setting stroke, mounted traveling with the unit for positioning to door length and door thickness.
4 pneumatic stops, swinging in from the side, for doors with veneer/overlapping face panels up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single-/double-rebate doors).
2 vacuum clamping lines, each with 5 vacuum cups, 130/200 x 70 mm, with feeler valve and blow-off equipment. Per line, 3 vacuum cups lowerable to match door height being processed.
1 vacuum pump approx. 128 m³/h suction capacity, with 250-liter buffer tank, for quick vacuum buildup.
Automatic central lubrication, free-standing control cabinet with air conditioning unit.
Occupational safety: bumpers on both sides of the gantry, side safety fence.
Various tools and tool holders can be included by prior arrangement.
The machine can be inspected in Hermaringen.
Mali oglas
Bergatreute
441 km
CNC z nosilci za vrata, stopnice ....
Maka 4- AchsenHC 55
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,
Mali oglas
Bergatreute
441 km
CNC obdelovalni center
MAKAHC 55
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, on request
Lhsdpfx Aefxgmgjbbjb
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAECM 27 R
Klic
Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R
Year of manufacture: 1998
• High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making.
• MAKA ECM 27 R in portal design.
• Equipped with automatic central lubrication system and control cabinet with air-conditioning unit.
• CNC control BWO 900C, 1 MB memory, integrated PC.
• Portable control panel BWO RC 910.
Technical data:
Working areas / working envelope (cube):
With tool length 130 mm and Ø 60 mm
X-axis: 3,000 mm
Y-axis: 2,250 mm
Z-axis: 800 mm (with fixture height 170 mm)
A-axis: 540° (+/- 270°)
B-axis: 200° (+/- 100°)
Rapid traverse speeds:
X/Y axis: 40 m/min
Z axis: 15 m/min
A/B axis: 10,000 °/min
1 pc. milling spindle 11 kW,
Variable spindle speed from 2,000 – 17,000 rpm,
With ceramic bearings and liquid cooling.
Tool holder SK 40 with automatic tool changer.
1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40.
1 pc. steel surface table 3,000 x 2,250 mm with T-slots.
1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank.
1 pc. vacuum clamping circuit.
Work safety:
With safety enclosure for the rear of the machine, side access door, cabin open at the top.
Lamella curtain on operator side and safety bumper on the front of the table.
Repairs / refurbishment before delivery:
Lhedpfx Abst Dl U Eobeb
- Maintenance.
Electrical connection values:
Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz
Rated power: 22.5 kW
Use of an RCD protective device in the machine supply line is not possible.
Operating temperature: 10 – 35° C
Pneumatics: 6 bar, approx. 10 m³/h
No tool holders and machining tools are included in the scope of delivery.
Used machine, sold without any warranty or guarantee.
Optional:
Including installation and commissioning with handover ready for production!
Mali oglas
Miastko
885 km
STROJ ZA MERJENJE
MAKADB5790/2
Klic
Stanje: zelo dobro (rabljeno), Motor power 2.02 kW
Pneumatic clamps
Lhodpfx Aboh Im S Njbjb
Pneumatic depth adjustment
Arm length 220 cm
Working depth 16 cm
Mali oglas
Kežmarok
525 km
Stroj za izdelavo vrat
Makaby Kuper
Klic
Leto izdelave: 1990, Stanje: dober (rabljeno), I am selling a MAKA door manufacturing machine
Year of manufacture: 1990
Combined oscillating slot drilling and drilling machine.
Ledpjgiwl Dofx Abbshb
Available for immediate sale.
Dražba
Dražba končana
Sankt Gallen
436 km
Obdelovalni center
MAKAKPF 335 RT
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21003600, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 650 mm, model krmilnika: BWO 910, delovne ure vretena: 200 h, Spindle was retrofitted in 2024 and has only 200 operating hours!
Reason for selling the machine: Space required for a new acquisition.
Ljdpfx Abov Hnn Dsbehb
TECHNICAL DETAILS
Travel distance X-axis: 1,500 mm
Travel distance Y-axis: 1,500 mm
Travel distance Z-axis: 650 mm (with 130 mm tool length)
Table size: 1,500 x 1,500 mm
Table height: 870 mm
Control model: BWO 910
Spindle & Cooling
Spindle type: High-speed milling spindle HSD
Spindle retrofit: September 2024 to ES 951 (air-cooled, value: €14,000)
Max. speed: 24,000 rpm
Spindle operating hours: 200 h
Tool system
Tool holder: ISO 30 + special clamping bolts
Number of tool magazine slots: 20
MACHINE DETAILS
Total length: 5,640 mm
Total width: 2,570 mm
Total height: 4,200 mm
Total weight: 8,500 kg
EQUIPMENT
- Flat table, tandem version with separate clamping circuits
- Drum-type tool changer:
- X-axis: fixed at X-zero, 4 slots for angle heads and special tools
- Y-axis: travelling, 10 slots, max. D 60
- Milling unit for flexible machining options
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAKPF 334 RT
Klic
Stanje: rabljeno, Leto izdelave: 1999, Used Machine MAKA KPF 334 RT
5-Axis CNC Machining Center
Year of Manufacture: 1999
High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn parts. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and a control cabinet with air conditioning unit.
Design / Version:
Gantry-type machining center with 2 aluminum tables
Axis Information:
Axis: Size / Travel Distance / Speed
X-axis: 2,750 mm / 40 m/min
Y-/V-axis: 2,400 mm / 40 m/min
Z-axis: 700 mm / 15 m/min
Rotary axis: 540° / 10,000°/min
Swivel axis: 200° / 10,000°/min
Machine Connection:
Voltage: 400V
Voltage deviation: max. +/- 5%
Operating temperature: 10 - 35°C
Compressed air pressure: 6 bar
Working areas / Workpiece cube size:
X-axis: 2 x 1,000 mm (coupled 2,150 mm)
Y-axis: 1,000 mm
Z-axis: 400 mm
Specified values are based on a fixture height of 170 mm / tool length 60 mm.
1 Equipment
1.1 Table Design
2 aluminum surface tables with threaded bushings for clamping, each 1,000 x 1,000 mm in size.
Tables can be coupled for processing large components.
Both table plates additionally receive threaded bushings and locating bushings (or dowel pins) for accepting the customer’s milling fixture as specified.
1.2 Vacuum supply
Machine is equipped with a vacuum system.
1 vacuum pump
1.3 Clamping system
1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-connect couplings mounted to the machine table.
1.4 Milling unit:
1 pc. DFM 83/90 milling spindle, ER16 / M22 x 1.5
2.5 kW / 27,000 rpm
Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5
1,000 to 27,000 rpm (infinitely variable speed), air-cooled.
A-axis 540° (rotary axis +/- 270°)
B-axis 200° (swivel axis +/- 100°)
1.5 Axis drives
Lhjdpfx Aov S Ut Dsbbob
Ball screw in X-, Y-, and Z-axes; A/B-axes with hollow-shaft drives.
1.6 Operator safety
One automatic sliding door per table.
Including safety cabin.
1.7 Control system
1 pc. BWO 900 machine control, with 1 pc. BWO 900C operating panel mounted on a mobile operator's console.
1.8 Power supply
Machine is designed for the following mains voltage:
Voltage: 400 V (max. +/- 5%)
Installed power: approx. 9 kW
Frequency: 50 Hz
The use of an RCD (Residual Current Device) in the machine power supply is not permitted.
1.9 Country specification
Technical machine documentation in German.
Consisting of:
- Operating manual for the machine
- Operating manual for the control system
- Wiring diagrams for electrical and pneumatic systems
- Control language in German.
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAKPF 334R
Klic
Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R
Year of manufacture: 2000
Compact design with integrated control cabinet in the machine base frame.
CNC control unit BWO 900C, 1 MB memory, with integrated PC.
Technical Data:
Working areas / travel dimensions:
With tool length 130 mm and diameter 60 mm
X-axis: 1,000 mm
Y-axis: 1,000 mm
Z-axis: 300 mm (with fixture height 120 mm)
A-axis: 540°
B-axis: 200° (+/- 100°)
Rapid traverse speeds:
Lhjdpoir Aq Tefx Abbjb
X/Y-axis: 45 m/min
Z-axis: 15 m/min
A/B-axis: 10,000 °/min
1 high-speed milling spindle HSD 6.8 kW,
continuously variable speed control from 2,000 – 24,000 rpm,
nominal power from 12,000 rpm.
With ceramic bearings, air-cooled.
Tool holder SK 30 with automatic tool changer.
1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face.
Aluminum table plate 1,000 x 1,000 mm with grid bores
1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit
Automatic central lubrication,
Control cabinet with air conditioner.
Occupational safety:
Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top.
Connections:
Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz
The use of an RCD (Residual Current Device) in the machine supply line is not possible.
Operating temperature: 10 – 35° C
Pneumatics: 6 bar, approx. 18 m³/h
No tool holders or machining tools are included in the scope of delivery.
Used machine, sold without any warranty or guarantee.
Mali oglas
Kłodawa
733 km
VERTIKALNI MORTISER-BORING MAKA DB-6 V
VERTICAL MORTISER-BORING MAKA DB-6 VVERTICAL MORTISER-BORING MAKA DB-6 V
Klic
Leto izdelave: 1997, Stanje: potreben popravila (rabljeno), Mazitno rezkalni stroj Maka DB-6 V, rabljeno, letnik 1977
Proizvajalec: Maka
Lhodpefd Rxqsfx Abbsb
Model: DB-6 V
Opis:
VERTIKALNI MAZITNI REZKALNI STROJ MAKA DB-6 V, leto izdelave: 1977. Stanje stroja: zelo dobro po generalni obnovi. Vrsta ponudbe: rabljeni stroj. Lokacija: Poljska. Tehnični podatki: ZELO POMEMBNO – STROJ JE VERTIKALNI IN PO OBNOVI.
Letnik: 1977
Mali oglas
Navan
1.756 km
Obdelovalni Center
MAKA - 2 MachinesKPF334R & KPF334 RT
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Dva stroja Maka:
Rok výroby: 1999 · Výrobné číslo: 422 799
Hlavné technické údaje
Model: MAKA KPF 334R
Ovládanie: BWO 900C CNC (integrovaný PC, cca 1 MB pamäte)
Pracovná oblasť: X = 1 000 mm, Y = 1 000 mm, Z = 300 mm (výška upnutia cca 120 mm)
Osi A/B: A = 540°, B = ±100° (celkovo 200°)
Rýchloposuv: X/Y = 45 m/min, Z = 15 m/min, A/B = 10 000°/min
Vreteno: HSD vysokootáčkové vreteno – 6,8 kW, 2 000–24 000 ot./min, keramické ložiská, vzduchom chladené (menovitý výkon od 12 000 ot./min)
Upínanie nástrojov: Kužeľ SK30; zásobník na 10 nástrojov (náradie do Ø60 mm, dĺžka cca 130 mm v závislosti od priemeru)
Stôl: Hliníkový pracovný stôl cca 1 000 × 1 000 mm (T-drážky / rastrové otvory)
Vákuum: Vákuový upínací systém (vákuová pumpa obvykle cca 54 m³/h pri podobných modeloch)
Mazanie: Centrálne automatické mazanie
Elektrika: 400 V, 50 Hz (overiť na mieste)
Lhsdjxwux Tjpfx Abbsb
MAKA KPF 334 RT – 5-osé CNC obrábacie centrum
Rok: 1999 · Výrobné číslo: 422 799
Hlavné technické údaje – MAKA KPF 334 RT
Pracovné pojazdy: X cca 2 750 mm · Y cca 2 400 mm · Z cca 700 mm
Otočná os A: cca 540° · Otočná os B: cca 200°
Rýchloposuv: X/Y cca 40 m/min · Z cca 15 m/min · A/B cca 10 000°/min
Dva pracovné stoly: cca 1 000 × 1 000 mm (možnosť spojenia)
Ovládanie: BWO 900 / BWO 900C CNC
Vreteno: vysokorýchlostné obrábacie vreteno (napr. cca 27 000 ot./min)
Zásobník nástrojov: bubnový, viacpolohový (nástroje do Ø60 mm / dĺžka cca 130 mm – overiť podľa konkrétneho stroja)
Vákuový upínací systém a centrálne automatické mazanie
Elektrika: 400 V / 50 Hz (kupujúci overuje kompatibilitu pripojenia)
Mali oglas
Nemčija
394 km
Rezkalni stroj Maka T 2000
MakaT 2000
Klic
Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj
Leto izdelave: 1993
Oprema in tehnični podatki:
Lhodpew I Uinsfx Abbeb
- toga rezkalna vretena; novo ležajenje
- z razširitvijo mize z izvlečnim okvirjem dolžine 2500 mm
- motor 5,5 kW
- Hitrosti: 3000/4500/6000/8000/10000 obr/min
- Rezkalni prislon z 2 možnostma nastavitve:
- skupni prislon
- zadnje sprejemne čeljusti
- Sesalne kapuce: 2 x 120 mm
- Samodejna motorna zavora
- Desni/levi tek
- s Haffner podajalnikom s 4 valji
Teža cca 700 kg
Razpoložljivost: po dogovoru
Lokacija: Flörsheim
Mali oglas
Nattheim
457 km
Vrtalni stroj z vrtljivim dletom
Maka09-5
Klic
Stanje: rabljeno, Leto izdelave: 1973, Lokacija skladišča: Nattheim
Ljdpfxjvvkt Uj Abbehb
Mali oglas
Arnstorf
315 km
Obdelovalni center
MAKAAP 70
Klic
Stanje: potreben popravila (rabljeno), Leto izdelave: 2005, obratovalne ure: 52.751 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 975 mm, pomik osi Y: 9.100 mm, pomik po osi Z: 575 mm, nazivna (navidezna) moč: 12 kVA, proizvajalec krmilnikov: BWO, model krmilnika: CNC 920, dolžina obdelovanca (maks.): 8.500 mm, širina obdelovanca (maks.): 450 mm, višina obdelovanca (maks.): 225 mm, vrtljajska hitrost (min.): 1.000 obr/min, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 16.600 kg, število vreten: 1, število mest v zalogovniku orodij: 32, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, neprekinjen delovni tlak: 6 letvica, MAKA AP70 5-Axis
Year of manufacture: 2005
Portal weight including unit and tool changer approx. 15,000 kg
Control cabinet weight approx. 1,600 kg
Operating voltage 400 V / 50 Hz
Operating pressure 6 bar
Compressed air consumption approx. 2,000 liters/hour uncompressed
Control type BWO CNC 920
Controlled axes + max. traverse paths approx.:
X - 975 / Y - 9100 / Z - 575 / A - ±270° / B - ±98°
Milling motor HSK 63F / 12 kW from 12,000 rpm, speed range 1,000 - 20,000 rpm
Lubrication: Permanent grease lubrication
Ledpfx Aov Rlpyjbbjhb
Tool holder: HSK 63 F
Tool magazine: Chain magazine with 32 slots / 160mm
Machine table: 2 clamping stations with 6 support beams with clamping / pneumatic clamping devices
Workpiece cube dimensions:
X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - ±270° / B - ±98°
The machine is currently not operational. The spindle including conversion kit to newer software needs to be replaced (can be requested from Maka).
The machine can be inspected under power at DE94424 Arnstorf by appointment.
All information without guarantee, sale only to commercial buyers. Inspection and collection by arrangement in 94424 Arnstorf (Germany).
Mali oglas
Lambsborn
670 km
Namizni rezkar
Maka/GriggioT 2000
Klic
Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Levo-desni tek,
3-1000 obr/min,
Zavorni motor s Haffner 3-valjnim podajalnikom,
Lhedpjybv A Aefx Abbeb
8 hitrosti
dobro ohranjen
Prevoz je možen z doplačilom!
Mali oglas
Schwanberg
69 km
Stroj za vgraviranje
MAKADB 5 N
Klic
Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser
MAKA Type DB 5
including numerous mortising tools – see photos
Workpiece stop: 2 pcs
Stop rail left/right: 2150 mm
Workpiece blow-out: 2x
Foot switch
Pneumatic workpiece clamping, lateral: 1 pc
Pneumatic workpiece clamping, from above: 2 pcs
Extraction connection: D 120 mm
Weight approx. 550 kg
Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails)
Note on used machines:
• Technical specifications are subject to errors and prior sale.
• Stated prices are ex location, free loading!
• The machines have been cleaned and function tested.
Ljdpfx Aev Hm Nmsbbshb
• All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site.
• Special agreements are only valid if made in writing.
(Inquiries will only be answered with your address and phone number!)
Mali oglas
Hermaringen
448 km
Obdelovalni center
MAKAPE 70
Klic
Stanje: dober (rabljeno), Leto izdelave: 2005, Used machine MAKA PE 70
5-axis CNC machining centre for working wood and plastics.
Machine in gantry design, with rack and pinion drive.
Year of manufacture: 2005
Technical Data:
CNC control BWO 920
for 5-axis machining.
LCD display 10.4"
2 MB NC memory, mobile control panel.
Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm:
Y-axis: 5,500 mm
X-axis: 1,250 mm
Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups)
Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm:
Y-axis: 5,900 mm
Ledpovr A A Tsfx Abbjhb
X-axis: 1,250 mm
Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups)
A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°)
Rapid traverse X/Y-axes 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min.
Milling unit:
- 1 universal unit for 5-axis milling with 50° angle head, power 7.5 kW (S1) 10 kW (S6), infinitely variable speed up to 22,000 rpm, milling spindle HSK-F63, water-cooled.
- 1 NC height-adjustable chip extraction system with lamella curtain.
Tool magazine:
- Tool interface HSK-F63 for automatic tool changer system.
- 1 horizontal drum magazine with 20 tool spaces for tools up to D = 90 mm, with sorted placement up to max. 160 mm (three spaces required for this).
Machine table:
- 10 support tubes on linear guides with pneumatic release for quick positioning.
- 2 x control circuits for stops "raise / lower"
- 2 x control circuits for sliding rail "raise / lower"
- 2 x control circuits for pneumatics "clamp / release"
- 2 x vacuum control circuits with buttons for clamping and automatic reset via CNC programming.
- 1 chip conveyor integrated in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm.
Vacuum supply:
- Machine equipped with vacuum system.
- 2 x vacuum clamping circuits
- 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir.
- Vacuum supports with various suction pads.
Other features:
- Automatic central lubrication.
- Control cabinet with air conditioning unit.
Workplace safety:
- Moving protective cabin with safety bumpers on the operator side.
Repairs / maintenance prior to delivery:
- Service performed.
- Lamella curtain at gantry new
- Sliding window new
- Energy chain Y-axis new
- Energy chain Z-axis new
- Various cables and air hoses replaced.
Mali oglas
Zielona Góra
645 km
Obdelovalni center
MAKAPE 170
Klic
Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21017403, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 5.900 mm, pomik po osi Z: 250 mm, proizvajalec krmilnikov: BWO 900C, teža obdelovanca (maks.): 8.000 kg, vrtljajska hitrost (min.): 1.000 obr/min, največja hitrost vrtenja: 17.000 obr/min, skupna masa: 8.000 kg, moč vretenovega motorja: 12.500 W, število vreten: 1, število mest v zalogovniku orodij: 32, montažni premer: 90 mm, premer orodja: 160 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, The machine is operational and in use; it will be available no earlier than 01.11.2024. The vacuum pump, central lubrication, tool magazine, and spindle have all been serviced and overhauled. The machine is connected to the power supply and can be inspected and tested. Additionally, the machine comes equipped with software including a postprocessor for stair production and a laser projector. Training can be provided if required.
Lhjdouyl Npjpfx Abbjb
Mali oglas
Sierakowska Huta
932 km
Stroj za planiranje površin
MAKA AH 530
Klic
Stanje: zelo dobro (rabljeno), Kataloška številka 7266
TEHNIČNI PODATKI
- širina valja 530 mm
- 4-nožni valj
- glušilna greben
- zaščita za valj
- dolžina miz 2900 mm
- daljša vhodna miza 1655 mm
- litoželezne mize
- obe mizi nastavljivi
- originalno nastavljivo litoželezno vodilo
- zavora
Ledpfx Abjx Symbebehb
- premer odsesovalnega nastavka 140 mm
- motor 4 kW
- dimenzije d/š/v 2900x1000x1210 mm
- teža 695 kg
PREDNOSTI
– nemška izdelava
– 4-nožni valj
– zavora
– glušilna greben
– daljša vhodna miza
– nebarvana
– izravnalni stroj v zelo dobrem stanju
Originalne slike
Video z zagonom stroja:
youtube.com/watch?v=v_3ECkLDWVI
Neto cena: 18.900 PLN
Neto cena: 4.500 EUR glede na tečaj 4,2 EUR
(Cene se lahko spreminjajo glede na večja nihanja)
Mali oglas
Gerolzhofen
542 km
Oblikovalec debeline
MAKADH 630 A
Klic
Stanje: rabljeno, Leto izdelave: 1992, s Centrofix - nožna gred
brezstopenjski pomik
2x izhodna valja
Ljdoxuv N Ijpfx Abbohb
rabljeno, v dobrem stanju, vrhunska oprema
Blagovna znamka: Maka
Tip: DH 630 A
Letnik: 1992
Št. stroja: 9201891
GS preizkušen za lesni prah
Motor: 6,7 kW
Širina skobljanja cca 630 mm
Višina skobljanja cca 300 mm
Miza - drsni valj 1 kos nastavljiv
členski pritisni nosilec
členska vlezna valja
2 jekleni izhodni valji
Pomik: 0-21 m/min brezstopenjsko
Število nožev: 4 kosi
Nožni sistem Centro-Fix-obrnjeni noži
Digitalni prikaz višine skobljanja
električna nastavitev višine z ročno fino nastavitvijo
Priključek za odsesavanje D 150 mm
Potrebni prostor pribl. 1200 x 1200 x 1400 mm
Teža pribl. 1000 kg
Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nepakirano
Predaja v dejanskem stanju, kot je bilo ogledano, brez garancije in jamstva.
Mali oglas
Wiefelstede
931 km
Elektromotor 1,3 kW 2800 vrt / min
MakaB130 80/2
Klic
Stanje: rabljeno, Three-phase motor, electric motor, milling motor Maka
Lhedpedwhuqefx Abbsb
- Power: 1.3 kW
- Speed: 2800 rpm
- Shaft: Ø 18 x 40 mm
- Design with: dovetail guide
- Dimensions: 330/135/H195 mm
- Weight: 15.7 kg
Mali oglas
Lambsborn
670 km
Površinski skobeljnik
MakaAH 430
Klic
Stanje: rabljeno, Poravnalni skobeljni stroj tip AH 430
- Leto izdelave: 1992
- 3 kW
- 380 V
- Zgornja upravljalna plošča
Ljdpfx Absx Htb Iobohb
- Skupna dolžina mize: 2750 mm
- Širina skobljanja: 430 mm
- Tersa 4-nožni valj
- Nastavitev mize z ročnim kolesom
- Motorna zavora
- Odsesovalni pokrov
- Skupne mere: 2800 x 600 mm
Mali oglas
Bad Honnef
756 km
Napajalnik MAKA -uporabljen-
MAKA
Klic
Stanje: rabljeno, Feed unit MAKA - used -
infinitely variable feed speed
----- Technical data -----
Rollers: 3 pieces
Lodpfxou R S R Ue Abbehb
Olajšamo vam iskanje: "maka hc 57 r"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.






























































































































































































