Obdelovalni center

MAKA KPF 335 RT

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Continuously Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optional with machine base Nedsfr Ih Depfx Abbecl About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: novo, Leto izdelave: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Ncedpfeg Tu Rksx Abbsl Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: zelo dobro (rabljeno), Motor-driven NC rotary table Continuously adjustable rotary table (increment 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Nedpfx Abofk R Tdobjcl Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization

Leto izdelave: 2022, Stanje: novo, številka stroja/vozila: RPM500_OSZ2, Robot - Polishing Machine RPM500_OSZ2 Ncsdpfx Absd Dt D Iobjl with oscillation (50 mm) and infeed (100 mm) Polishing discs diameter - 1000 mm Drive power - 4 kW Extraction ports - 100 mm Two units available

Stanje: rabljeno, številka stroja/vozila: 007649, Maks. obdelovalna širina: 600 mm Ncodpfsu Eviqjx Abbel Lepilni sistem: EVA

Stanje: kot nova (razstavni stroj), Leto izdelave: 2014, obratovalne ure: 500 h, skupna masa: 5.000 kg, CNC obdelovalni center GREDA MITIKA. Ncsdpfx Ajwmxk Isbbol

Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with integrated control cabinet in the machine base frame. CNC control unit BWO 900C, 1 MB memory, with integrated PC. Technical Data: Working areas / travel dimensions: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm (with fixture height 120 mm) A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y-axis: 45 m/min Z-axis: 15 m/min Nsdoir Aq Tjpfx Abbjcl A/B-axis: 10,000 °/min 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed control from 2,000 – 24,000 rpm, nominal power from 12,000 rpm. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face. Aluminum table plate 1,000 x 1,000 mm with grid bores 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioner. Occupational safety: Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top. Connections: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2005, Used machine MAKA PE 70 5-axis CNC machining centre for working wood and plastics. Machine in gantry design, with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse X/Y-axes 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° angle head, power 7.5 kW (S1) 10 kW (S6), infinitely variable speed up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface HSK-F63 for automatic tool changer system. - 1 horizontal drum magazine with 20 tool spaces for tools up to D = 90 mm, with sorted placement up to max. 160 mm (three spaces required for this). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum control circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Other features: - Automatic central lubrication. - Control cabinet with air conditioning unit. Workplace safety: - Moving protective cabin with safety bumpers on the operator side. Repairs / maintenance prior to delivery: - Service performed. - Lamella curtain at gantry new - Sliding window new - Energy chain Y-axis new - Energy chain Z-axis new - Various cables and air hoses replaced. Ncjdpfx Aevr A A Tobbjl

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Used Machine MAKA PM 270 R 5-Axis CNC Machining Center for processing wood, plastic, and aluminum. Gantry design with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse X/Y-axis: 45 m/min. Z-axis: 24 m/min. A/B-axis: 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, infinitely variable speed up to 17,000 rpm, spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool Magazine: - Tool interface ISO 40 for automatic tool changing system. - 1 chain-type tool magazine with 32 slots for tools up to D = 90 mm, sorted storage up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic release device for rapid positioning. - 2 control circuits for stops "raise / lower" - 2 control circuits for slide bar "raise / lower" - 2 control circuits for pneumatics "clamp / release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame for transporting chips and small offcuts up to approx. 100 x 100 x 100 mm. Tools: Tools are not included! Delivery can include various tool holders upon agreement. We would be pleased to provide you with a separate offer. Vacuum System: - 1 vacuum pump, approx. 140 m³ suction capacity, including 250 L tank for rapid vacuum build-up. - 10 vacuum supports with various suction pads. - Various clamping devices for posts and curved elements. - Stops raise / lower for workpiece positioning. Miscellaneous: - Automatic central lubrication system. - Control cabinet with climate control unit. - Projection laser Ncjdpfsvmywqox Abbel Occupational Safety: - Moving protective cabin with safety bumpers on the operator side.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making. • MAKA ECM 27 R in portal design. • Equipped with automatic central lubrication system and control cabinet with air-conditioning unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / working envelope (cube): With tool length 130 mm and Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm (with fixture height 170 mm) Ncodpfx Abst Dl U Ejbjl A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 pc. milling spindle 11 kW, Variable spindle speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40. 1 pc. steel surface table 3,000 x 2,250 mm with T-slots. 1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank. 1 pc. vacuum clamping circuit. Work safety: With safety enclosure for the rear of the machine, side access door, cabin open at the top. Lamella curtain on operator side and safety bumper on the front of the table. Repairs / refurbishment before delivery: - Maintenance. Electrical connection values: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Use of an RCD protective device in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders and machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!