Laboratorij Brusilniki nakup rabljenega (238)

Stanje: rabljeno, Leto izdelave: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the outfeed side of the machine - Working width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Variable feed speed, infinitely adjustable from 2.5 to 12.5 m/min - With roller table at infeed - With separate additional structuring brush - With roller table at outfeed - With digital display unit for the electromotor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction nozzles: 2 x 200 mm Fpsdpfx Asw R Hh Uepljg - Feed belt is generally OK, but has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in uninspected condition! Availability: short notice Location: Röllbach

Stanje: novo, Leto izdelave: 2026, New machine Year of manufacture: 2026 Features and technical data: - Usable WORKING WIDTH: 950 mm - SANDING BELT LENGTH: 670/970 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 150 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 10 HP - BELT SPEED: 18 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed feed belt with infinitely adjustable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION 'ECO GEAR PATENT SYSTEM' - 1 pc. DRUM BRAKE for belt deceleration Fedpfjy I Eqwsx Aplepg - Pivoting ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE IN ACCORDANCE WITH CE STANDARDS IMPORTANT: New patented belt oscillation system 1. without valves 2. without light barriers 3. not sensitive to dust 4. energy-saving, environmentally friendly system The machine model with this system has been running continuously since 2008 without lateral belt run-off! Including special equipment: 11 kW motor Pneumatic sanding pad incl. engagement control synchronized with feed speed Location: Flörsheim Availability: short notice

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Complete Metal and Material Testing Laboratory Fjdoy Rglnspfx Aplepg Industrial Quality Control / Testing Laboratory as a Turnkey Package A fully equipped, professional metal and material testing laboratory from an industrial quality assurance environment is for sale. Includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key Highlights - AMETEK / SPECTRO SPECTROTEST TXC02 UV mobile OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile testing machine 100 kN - JOMESA filter analysis system for technical cleanliness as per VDA 19 / ISO 16232 - Struers TransPol-5 mobile metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measurement system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC mobile hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann laboratory fume hoods, lab benches, hazardous material cabinets, and chemical cabinets - Extensive laboratory consumables, lab glassware, and accessories Full item description available in the documents.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0000025, višina središča: 315.425 mm, teža obdelovanca (maks.): 3.000 kg, dolžina brušenja: 3.000 mm, premer brusilnega koluta: 750 mm, skupna širina: 2.700 mm, skupna dolžina: 11.000 mm, skupna višina: 2.200 mm, premer brušenja: 630.850 mm, teža obdelovanca med konicami: 3.000 g, razdalja med središči: 3.000 mm, širina brusilnega kolesa: 100 mm, dolžina podajanja os Z: 3.300 mm, hitrost vretena za brušenje: 1.000 obr/min, skupna masa: 17.000 kg, vrtljajska hitrost (min.): 2 obr/min, največja hitrost vrtenja: 250 obr/min, trajanje garancije: 24 meseci, hitro pomikanje X-os: 3 m/min, hitri pomik na osi Z: 6 m/min, vhodna napetost: 400 V, največja hitrost vretena obdelovanca: 250 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Cylindrical grinder BUC63/3000 CNC, new, in 100% condition, equipped with Sinumerik ONE or INTRONIX TOS CNC control system. It is possible to extend the machine with an additional device for superfine finishing SUPFINA, or with a grooving device for rubber or plastic rollers. Fpsdpfx Apsu U Ewgoleg

Leto izdelave: 2024, stanje: novo, The shredder is ideally suited for processing heterogeneous materials. Fodpsgkr I Nofx Apljpg

Stanje: zelo dobro (rabljeno), Auxiliary granulators Zerma Fpodpfx Apolvt Eqslog Year: 2005 Model: GSL-18AMIS

Stanje: rabljeno, Rotary Vane Vacuum Pump Manufacturer: Leybold Fjdpebqnhgefx Aplopg Model: Trivac D25 BCS Cat. No.: 11879 Pumping speed: 25 m³/h Ultimate pressure: approx. 0.005 mbar Motor: 400V, three-phase Please send us your pump inquiry specifying your requirements.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, ATM Type: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial-grade equipment for precise material separation in the fields of metallography, laboratory use, and materials testing. Fsdsymbzujpfx Aplspg Machine comes with base cabinet and integrated coolant system. Several suitable cutting disks included (see pictures). Very robust, professional quality Technical data (according to nameplate) Type: Brillant 255 Year: 04/2019 Manufacturer: ATM GmbH Electrical data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Circuit protection: 32 A Mechanical data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Bore: 32 mm Machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: used Scope of delivery: (see pictures) (Subject to changes and errors in the technical data and information!) For further questions, please feel free to contact us by phone.

Stanje: rabljeno, A N G E B O T Wir können Ihnen ab Lager, Irrtum und Zwischenverkauf vorbehalten, unverbindlich anbieten: Fpodpfjwftt Uex Apljg TSCHUDIN (CH) Spitzenlose Rundschleifmaschine Typ TC-300 Baujahr 2001 Schleifbereich – Ø 0,5 – 25 mm (30) Werkstücklänge beim Einstechschleifen 125 mm (140) Werkstücklänge beim Durchlaufschleifen 300 mm Schleifscheibenmaß: Ø x Breite Ø 300 x 125 mm (140) Regelscheibenmaß: Ø x Breite Ø 225 x 125 mm (140) Schleifscheiben-Umfangsgeschwindigkeit 35 m/sec Schleifscheiben-Zustellung 3 mm Regelscheibendrehzahlen stufenlos 0 – 444 U/min Neigung der Regelscheibe Grad Schleifscheibenantrieb ca. 7,5 kW Gesamtantrieb ca. 13 kW - 380 V - 50 Hz Gewicht 2.500 kg Zubehör / Sonderausstattung: • Die Maschine arbeitet mit einer festen Werkstückposition, wodurch sowohl Schleifspindel- als auch die Regelspindel-Einheit verstellbar sind. Dies vereinfacht die Einstellung der Maschine sowie die automatische Be- und Entladung der Werkstücke. • SIEMENS SPS-Steuerung für den automatisierten Arbeitsablauf mit SIEMENS Touchscreen. Die komplette Elektrik und SPS-Steuerung wurden 2016 erneuert! • Elektromechanische Kopier-Abrichteinrichtung für die Regelscheibe • Regelscheiben- und Schleifscheiben-Drehzahlen sind stufenlos regelbar. • Verstellbare, aufgebaute Werkstück-Einstech-Führungsbrücke mit montierter Einstech-Werkstückauflage • Elektromechanisch ansteuerbarer Werkstück-Einstoßer & automatischer pneumatischer Werkstück-Ausstoßer • Zusätzlicher Ausfahrzylinder zum automatischen Abkippen der Werkstücke nach dem Einstechschleifen (einstellbar 4 – 30 mm) • Die Maschine ist vorbereitet für den Einsatz mit einem HELP-TEC Hublader MSHL08/400P, dieser ist jedoch derzeit nicht vorhanden. • Komplette Umhausung des Arbeitsbereichs mit Überwachungstechnik. • Separater Schaltschrank, Bedienungsanleitungen sowie Elektroschaltpläne des Retrofits. Zustand: Sehr guter Zustand! Die Maschine wurde 2016 mit neuer Elektrik ausgerüstet! Bitte klicken Sie hier für ein Video der Maschine: Lieferung: ab Lager, sofort verfügbar, FCA Metzingen Zahlung: rein netto – nach Rechnungserhalt Wir führen stets eine große Auswahl an Schleifmaschinen am Lager – bitte sprechen Sie uns auf Ihren Bedarf an! QUOTATION We are pleased to offer you ex our stock, subject to prior sale and technical error: TSCHUDIN (CH) Automatic precision centerless grinding machine Model TC-300 Year of manufacture: 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding: 125 mm (140) Max. workpiece length for through-feed grinding: 300 mm Grinding wheel dimensions: Ø x width 300 x 125 mm (140) Regulating wheel dimensions: Ø x width 225 x 125 mm (140) Grinding wheel peripheral speed: 35 m/sec Grinding wheel infeed: 3 mm Regulating wheel speed, infinitely variable: 0 – 444 rpm Regulating wheel inclination: Degree Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW - 380 V - 50 Hz Weight: 2,500 kg Accessories / Special Features: • The machine works with a fixed workpiece position, making both the grinding spindle unit and the regulating spindle unit adjustable. This simplifies adjustment of the machine and facilitates automatic workpiece loading and unloading. • SIEMENS PLC control for automated operation with SIEMENS touchscreen. Complete electrics and PLC newly installed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating wheel and grinding wheel speeds are infinitely variable • Adjustable plunge guiding bridge wi

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Julabo Model: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent Condition / Year of Manufacture: 2018 For sale is a Julabo recirculating chiller FLW7006, a high-performance industrial cooling unit suitable for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been thoroughly inspected, and is in very good, clean condition. All functions are guaranteed, and the display and control elements work flawlessly. Typical Applications: - Machine and process cooling - Laboratory and testing technology - Plastic, laser, or plant cooling Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connector - Casters for easy transport Technical Data: Manufacturer: Julabo GmbH Model: FLW7006 Serial Number: SN 10339349 Year of Manufacture: 2018 (according to nameplate) Refrigeration Technology: Refrigerant: R452A Fill Volume: 1,625 g Operating Pressure: max. 24 bar CO₂ Equivalent: 3.48 t GWP: 2140 Fpodpfsyfndgsx Aplsg Temperature & Performance Data (manufacturer’s specs): Temperature Range: –20 °C to +40 °C Temperature Stability: ± 0.5 °C Cooling Capacity (typical, depending on conditions): approx. 1.3 kW at –20 °C approx. 5.5 kW at 0 °C approx. 7.4 kW at +20 °C Connections & Equipment: - Flow and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Castor-mounted chassis Electrical Data: Power Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & Weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & Delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Power cable Shipping method: Freight delivery on pallet (by arrangement, shipping costs depend on destination) Collection: possible by appointment (Specifications subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Leto izdelave: 2026, stanje: novo, Extruder 30 mm with mounted hot die-face cutter; the stainless steel housing is pivotable. The cut length for the granules can be continuously adjusted. Optionally, we offer a conveyor belt for cooling the granules. Fpsdef Uc Ugepfx Aplog

Stanje: rabljeno, Hosokawa Mikropul ACM 2/3 classifier mill, used, with intake filter, intake cooler, fan, cyclone, and piping. Unfortunately, the filter is missing. Fodpfx Ajvcmc Eoplepg

Stanje: zelo dobro (rabljeno), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser Laboratory Stand Dissolver Type: GFD 11 LST Intended Use: The machine is designed for mixing powdery solids, liquids, and pastes as well as incorporating fillers. The viscosity range can vary from low-viscosity to paste-like. Machine Design: The laboratory stand dissolver essentially consists of the machine base, the lifting device, the drive for the mixing tool, a telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with controller and compact-controller. In the working position, the vessel (customer-supplied) and the telescopic hood form an enclosed mixing chamber. The hood is equipped with a hose connection suitable for the application. The drive of the mixing tool is equipped with a variable speed adjustment via frequency converter. Arrangement, capacities, and speeds of the motors can be found in the attached project drawing. The display of the compact controller allows you to view the speed of the mixing tool, mixing time / remaining mixing time, mixing sequences, and other functions. Operation Switching the unit on and off is carried out via the corresponding push buttons in the control cabinet. Raising the mixing tool drive Raising is accomplished by activating the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. Once the buttons are released, the arm remains at any chosen height. Lowering the mixing tool drive To lower the lifting arm, the corresponding push buttons (two-hand safety circuit DOWN-DOWN) on the control panel must be pressed. Changing the mixing tool The mixing tool shaft is equipped with an M8 connection thread. The mixing tool (stirring disk supplied by the customer) can be unscrewed and replaced as required. Technical Data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 rpm via frequency converter Ambient temperature: +5°C to +40°C Degree of protection: IP 54 Container: 1.18 liters, D=100 mm, H=150 mm (75 mm) customer-supplied Mixing tool: Stirring disk (customer-supplied) Control Panel / Display The machine is mainly operated via the compact PLC controller “Vision 560-T25B.” Safety-related functions, such as power disconnection via the main switch, emergency stop, and two-hand operation for opening/closing the mixing chamber, are excluded from this. The control panel consists of an illuminated LCD display and membrane push buttons with tactile feedback. The letter-labeled buttons are programmed with fixed functions, which can be activated at any time regardless of the menu. Once a function is activated, its status appears in the upper right area of the "operation display" menu. The M up and down buttons allow you to cycle through the various menu screens. Type: GFD 11 LST Fpjdod Edm Sspfx Apleg Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and error!) Should you have any further questions, we will gladly assist you by phone.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Knife grinders for strips 800 Kofama Lignum Sharpening bar 800 used, year 1987 Condition: Table Model: 800 Description: 800 knife grinders for strips Fpsdpfx Ash S Upieplsg

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), SERVOCUT 302-MA Automatic Abrasive Cutting Machine Note: Do not purchase used metallography equipment: "Used often means worn out" – abrasive materials can cause complete failure after just a few years if daily, intensive cleaning is not performed. * Cutting machine for a wide range of programmable cutting methods * Programmable via 7" touchscreen control panel with SIEMENS PLC * Programming of cutting parameters via LCD display * Automatic traverse table + manual chop cut (other types available) * Precise, motorized positioning of the specimen in X, Y, and Z axes * Integrated traverse table control with force-dependent adjustable feed rate * Variable cutting force, pulse mode operation, overload protection for the drive motor * Compact motor with 2,800 rpm cutting wheel speed * Electronic braking system * Cutting depth up to 110 mm solid material (with 300 mm diameter cutting wheels) * Double, split (left/right) T-slot table made of stainless steel * Base made from solid die-cast aluminum * Incl. 80 l recirculating cooling system complete with connection hoses * Delivered ready for operation (without clamping devices) * Power supply 400 V / 50 Hz, 3-phase with neutral, 16 A circuit breaker Fpodpfx Ajcw Ipajplog * Delivery includes test consumables consisting of: * Assortment of 20 cutting wheels with 300 mm diameter * 5 liters METCOOL coolant

Stanje: dober (rabljeno), Memmert B60 inkubator Naprodaj je rabljen inkubator tipa B60 proizvajalca Memmert. Tehnične podrobnosti: Fpsdexlq Nkopfx Apleg Proizvajalec: Memmert Model: B60 Izvedba: inkubator / grelna omara Temperaturno območje: pribl. +10 °C nad sobno temperaturo do 70 °C Moč: pribl. 2000 W (220 V / 50-60 Hz) Področje uporabe: laboratorij, raziskave, industrija, medicina Stanje: rabljeno, delujoče Inkubatorje Memmert B60 in druge artikle kupite po ugodnih cenah – pri nas kupujete opremo strokovnjakov za strokovnjake – v naši TRGOVINI najdete tudi dodatne privlačne ponudbe.

Stanje: pripravljen za uporabo (rabljen), Značilnosti: Maksimalna hitrost: 15.000 vrt./min (odvisno od rotorja) Minimalna hitrost: 300 vrt./min Maksimalni RCF: 21.885 x g (mikroliterski rotor) Nastavljiv temperaturni razpon: od -9°C do +40°C Čas delovanja: Standardni način: 1 min - 9 h 59 min, "hold" = neprekinjeno delovanje Razširjeni način: 1 min - 99 h, "hold" Fpedpfxsxqq R Sj Aplsg Nazivna moč: 120V, 60Hz, 12A Poraba energije: 1220W Dimenzije (Š x G x V): 29 x 26 x 14,5 in Teža: ~288 lbs (~130 kg) Priložen avtoklavirni rotor Heraeus, kot je prikazano na slikah. Dobro delujoč. Poglejte še naše ostale oglase.

Stanje: zelo dobro (rabljeno), Friocell FC-B2V-M/ FC 55 Laboratory Incubator Refrigerator The Friocell 55 (Model FC-B2V-M) is an energy-efficient cooled incubator with forced air circulation, designed for precise temperature control in biotechnology, botany, and the food industry. It features a patented cooling system that minimizes sample dehydration and provides extremely short recovery times. Key Features & Equipment Cooling & Airflow: Patented forced air circulation in the double-walled chamber ensures high temperature uniformity. Control System: Microprocessor control with Fuzzy Logic, optimizing heating and cooling times without overshooting. Interfaces: RS-232 connection as standard; USB host and Ethernet available as options. Material: Interior chamber made of high-grade stainless steel (DIN 1.4301, AISI 304) with rounded corners for easy cleaning. Doors: One external metal door and one internal glass door for sample observation without temperature loss. Specification Volume: 55 liters Operating temperature: 0.0 °C to 100 °C Temperature accuracy: Temporal: ± 0.2 °C; Spatial: ± 0.5 °C (at 10 °C) Cooling time (22 °C to 10 °C): < 21 minutes Internal dimensions (W×D×H): 400 × 370 × 350 mm Fjdpfxjy Nxfqe Apljpg External dimensions (W×D×H): 620 × 640 × 875 mm (incl. door and handle) Weight: approx. 83 kg Electrical power: Max. 700 W "Everything from one source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more incubators—new and used—in our shop! International shipping costs on request!

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: LGPv 1420, Rabljena laboratorijska zamrzovalna omara Liebherr Proizvajalec: Liebherr (Mediline) Model: LGPv 1420 Index 41C/001 Leto izdelave: 2016 Podrobnosti: Prostornina: 1427 litrov Zunanje dimenzije (š x g x v): 1430 x 830 x 2150 mm Notranje dimenzije (š x g x v): 1250 x 700 x 1550 mm Komplet z 8 rešetkami, največja obremenitev 60 kg Temperaturno območje: od -10 do -26°C Poraba energije: 8,887 kWh/24h Fpodpexiw Uujfx Apljg Dinamični hladilni sistem z ventilatorjem Samodejno odtaljevanje z zaklepom in na vrtljivih kolesih Vrata iz belega jekla Teža cca 219 kg

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Na voljo so različne starejše, vendar delujoče merilne in preizkusne naprave iz žitnega laboratorija. 1) Merilnik padavih številk Perten Falling Number 1402. 2) Čistilec vzorcev A/S Rationel Kornservice Sample Cleaner MLN, teža: pribl. 60 kg. 3) Laboratorijski mlin MIM 3100. 4) Naprava za merjenje hektolitrske mase Louis Schopper z utežmi in tehtnico. 5) Merilnik vlage za žito Pfeuffer HOH Express HE 90, leto izdelave: 1998, čas merjenja: pribl. 30 s. 6) Laboratorijski mlin Perten LM 3100. 7) Laboratorijska peč. 8) Kalibracijska in temperaturna referenčna kopel Fluke 7320 High-Precision-Bath, temperaturno območje: -20°C/150°C, ločljivost: 0,01°C, dimenzije kopeli X/Y/Z: pribl. 170 mm/90 mm/230 mm, prostornina: pribl. 9 l. Dokumentacija je na voljo. Ogled na lokaciji je možen. Paketna prodaja je zaželena, vendar je možna tudi posamična prodaja. Fpedpfx Aey Ey Thepleg

Stanje: novo, Profesionalni testni pokrov (prufhaube) priznanega nemškega podjetja SCHLEICH – model 13-R2. Fsdjy Aggcopfx Aplopg Naprava je namenjena laboratorijski in industrijski uporabi ter zagotavlja maksimalno varnost pri visokonapetostnem električnem testiranju. Primer v stanju novega iz tovarne – skladiščeno, nikoli uporabljeno. ⚙️ Tehnični podatki: proizvajalec: SCHLEICH (Nemčija) model: 13-R2 tip: testni pokrov / prufhaube leto izdelave: 04.2023 serijska številka: 21942 država izvora: Nemčija ✅ Ključne značilnosti: profesionalno testno območje („forbidden zone“) prozoren pokrov – popoln nadzor nad procesom varnostni sistem (blokade / senzorji) močna industrijska konstrukcija visoka kakovost izdelave – made in Germany idealno za HV teste / elektroniko / proizvodnjo 📦 Stanje: Novo – skladiščeno, neuporabljeno. Lahko ima minimalne sledi skladiščenja. 📸 Vključen komplet: aparati kot na fotografijah

Stanje: zelo dobro (rabljeno), 1040 x 820 x 930 mm D x Š x V Fodpfx Aoy Ec U Ioplepg

Leto izdelave: 2015, stanje: kot nova (razstavni stroj), številka stroja/vozila: 2245, OFFER No. 2245 1 used, as-new laboratory batch extrusion and pelletizing line including accessories, comprising: - AlphaTec single-screw extruder, Type AE-S 25-30 Screw diameter: 25 mm – 30 L/D Extruder drive: 3 kW, screw speed: 10 – 80 rpm Air-cooled cylinder, electrically heated - 1x degassing zone - 1x manual screen changer with screen diameter 68 mm - 1x strand die head - 1x water bath 1,000 x 150 mm, height adjustable - 1x strand pelletizer, feed width 30 mm, drive 0.75 kW - Control cabinet with PID control, Melt pressure, frequency-controlled speed - Demonstration system A test run with your material can be arranged at short notice upon request. Fpedpfod Sg Hrsx Apljg Further extruders available from stock in Wuppertal.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Extrudeuse de laboratoire/d’essai AM-20 avec tête plate / filière à film et unité de calandrage Extrudeuse compacte et verticale de laboratoire ou de recherche AM-20 pour le traitement de divers plastiques comme PP, PE, PS, ABS, PVC et autres granulés plastiques. La machine est équipée d’une tête plate (filière à film) et convient particulièrement à l’extrusion de films, aux essais matériaux, aux essais de couleur et de mélange ainsi qu’aux applications de développement en laboratoire ou atelier technique. L’équipement de calandrage est également compris, comme visible sur les photos. Données techniques : • Modèle : AM-20 • Tension : 110 V / 220 V • Tension d’alimentation : 2 x 220 V • Puissance : 1000 W • Diamètre de vis : 20 mm • Rapport L/D : 15:1 • Débit : env. 500–1000 g/h • Dimensions : 45 x 25 x 60 cm Fodpfxsyyw T Uj Aplopg Convient pour : • Extrusion de films • Essais de laboratoire et de développement • Développement de matériaux • Essais de couleur et de mélange

Stanje: zelo dobro (rabljeno), Mettler Toledo Fedpfxjyxnpws Aplspg Moisture Analyzer / HB43-S Mettler Toledo HB43-S Moisture Analyzer Laboratory Quality – Top Condition – Never Used!! Description: For sale is a high-quality Mettler Toledo HB43-S moisture analyzer (halogen technology) from the professional laboratory sector. The device is used for fast and precise determination of the moisture content in samples (e.g. food, plastics, pharmaceuticals, chemicals, powders, granulates, etc.). Measurement is performed by heating with a halogen lamp and simultaneous determination of weight, from which the moisture content is automatically calculated. Special feature: This device has never been used and is thus in like-new condition. Ideal for: - Quality control - Laboratory applications - Production & incoming goods inspection - Research & development Features: - Automatic moisture determination (% moisture / % dry matter) - Halogen heating technology (fast & precise) - Integrated precision balance - Simple menu navigation - Start/Stop keys for quick operation - Various drying programs - RS232 interface (e.g. for printer/PC) Technical Data: - Model: Mettler Toledo HB43-S - Maximum weighing range: 54 g - Resolution: 1 mg - Heating system: halogen - Power supply: 200–240 V / 50–60 Hz - Power consumption: approx. 2 A - Interface: RS232 Dimensions (approx.): - Width: ~ 20 cm - Depth: ~ 33 cm - Height: ~ 15 cm - Weight (approx.): ~ 4–5 kg Condition: used – never operated Scope of delivery: (see image) - Mettler Toledo HB43-S device - Sample holder / weighing unit - Power cable - Documentation / paperwork - Accessories (see photos, e.g. sample pans) (Subject to changes and errors in technical data. All details are without guarantee!) For further questions, please feel free to contact us by phone.