Krožni Vibrator nakup rabljenega (2.343)

Stanje: novo, Vibratory Finishing System with Separation Section Fjded Nnr Dspfx Ah Dsgh - Total volume approx. 420 l - Tub diameter approx. 1355 mm - Max. part size 240 mm - PU lining, bottom 15 mm - PU lining, side wall 15 mm - Drive 1.1 kW - Max. rotational speed 1500 rpm - Total height approx. 1100 mm - Total weight 780 kg - Including dosing pump - Including control cabinet with variable speed control, 1000 - 1500 rpm

Stanje: rabljeno, Linearni transporter / vibracijski transporter / sortirna naprava Vibracijski linearni transporter, vibracijski zalogovnik, dozirni zalogovnik, skladiščni zalogovnik Vibracijski spiralni transporter, spiralni transporter Tresilna posoda, podajanje vijakov z vibracijskim transporterjem za vijačno tehniko Podajni sistem, podajna naprava Proizvajalec: RNA Rhein-Nadel Automation GmbH Letnik: ca. 2000 Uporabna teža: cca 1,5 kg Frekvenca vibracij: 100 Hz / 6000 min-1 Fgjdpjxf Urvofx Ah Doh Priključna napetost: 220 Voltov, 50 Hz - Vibracijska plošča D x Š = 170 x 60 x 12 mm - Montirana dolžina proge 340 mm - Gradbena višina z osnovno in vibracijsko ploščo ca. 115 mm Potrebni prostor D x Š x V: 400 x 280 x 400 mm Teža: 9 kg dobro ohranjeno stanje

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: bencin, Wacker BVPN 50 vibracijska plošča v dobrem stanju, takoj pripravljena za uporabo. Teža približno 70 kg Velikost plošče približno 600 mm x 470 mm Fjdpoxlrh Uefx Ah Dogh z originalno servisno dokumentacijo Wacker Prosimo, ne pošiljajte povpraševanj po e-pošti. Za vprašanja smo vam na voljo po telefonu. Ogled in prevzem sta možna le po predhodnem telefonskem dogovoru. Pridržujemo si pravico do sprememb, vmesne prodaje in napak. Smo člani Zveznega združenja neodvisnih trgovcev z vozili (BVfK) in imamo oznako kakovosti BVfK!

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Sliding-Finishing Machine Manufacturer: OSRO Model: SB3 Vibratory Bowl Diameter: approx. 1000 mm with integrated centrifuge The system is used and shows wear at the base of the vibratory bowl, otherwise the machine is in good condition. Fgedpewc Sz Esfx Ah Dsh

Leto izdelave: 2024, Stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm Fgodpfx Aeu Izkeh Deh max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW feed motor: 4.0 kW width adjustment motor: 0.55 kW infeed roller motor: 0.75 kW weight: 8,000 kg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades motor-driven log turning device electronic braking system

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, For sale: Industrial vibratory polishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust equipment manufactured in 1988, designed for professional finishing of components. The machine is ideal for: • surface polishing • deburring after machining • edge rounding • cleaning and preparing surfaces for painting or electroplating Capable of operating with various types of media – ceramic, plastic, or steel – depending on the processed workpieces. Technical specifications: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch capacity: 500 kg Fgjdpfew Ixw Aex Ah Dsh • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The unit is complete, in good technical condition, and ready for operation after connection. Heavy-duty construction, parts discharge with rubber cover, convenient media exchange system. SPALECK is a German brand renowned for manufacturing reliable vibratory finishing machines, highly regarded by industrial facilities worldwide.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, LETO IZDELAVE: 1971 Fedpoxcwzbsfx Ah Dsgh Oprema: TROWAL vibracijski stroj za brušenje Dokumentacija

Stanje: rabljeno, Convoyeur à spirale vibrante / appareil de tri / convoyeur à spirale / alimentateur vibrant RNA Bol vibrant, appareil de tri / alimentation de vis avec alimentateur vibrant pour la technologie de vissage Système d’alimentation, appareil d’alimentation Fabricant : RNA Rhein-Nadel Automation GmbH Type SRC-B200-2L Année de construction : env. 2000 Diamètre supérieur du bol : 250 mm Diamètre inférieur du bol : 190 mm Hauteur intérieure du bol : env. 35 mm Largeur de la voie de tri : env. 3 mm Hauteur totale (entraînement + bol avec voie de tri) : 240 mm Raccordement électrique : 230 V, 50 Hz Fgjdpfx Ahoxf Urpe Dsh - Régulateur RNA, type ESG 90 pour vitesse de vibration réglable - Le convoyeur a été utilisé pour l’alimentation de fusibles automobiles à languette Encombrement Ø x H : 250 x 240 mm Poids : 13,5 kg Bon état Un convoyeur à spirale se compose toujours de deux éléments essentiels. 1) Bol de tri, dans lequel les pièces sont orientées 2) Entraînement, qui génère des vibrations dans le bol de tri par des oscillations mécaniques et met ainsi les pièces en mouvement.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 5,4 kW (7,34 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 247 kg, Leto izdelave: 2025, Oprema: UVV varnostni pregled, Wacker Neuson Vibratory Plate DPU 3750 Hts, - NEW -! Weight: 247 kg, Frequency: 90 Hz, Centrifugal Force: 37 kN, 500 mm working width, Hatz diesel engine 1B30 with 5.4 kW. Other sizes available! Machine location: Warehouse D-46514 Schermbeck. _____ Wacker Neuson DPU 3750 for sale | Vibratory Plate Diesel 37 kN | new 500 mm vibratory plate | Wacker vibratory plate with Hatz engine | Wacker DPU 3750 Hts new | professional reversible vibratory plate | DPU3750 Hts for sale | 250 kg diesel vibratory plate | Wacker Neuson paving plate | 37 kN 5.4 kW soil compactor Fields of application: -Paving and landscaping -Pipeline and sewer construction -Road construction, paths & base layers -Construction companies, rental fleets, municipalities Fsdpfxexl Tb As Ah Djgh -Civil engineering, foundations & edge compaction -Fiber optic technology

Leto izdelave: 2000, Stanje: rabljeno, številka stroja/vozila: 001170, SEMI-CIRCULAR ROLLER CONVEYOR OMEF - CE COMPLIANT - USED - Serial No. 001170 - Year 2000 Fgsdpfx Ahsrnkmlo Doh

Stanje: rabljeno, 1200064 Brusilni stroj Trennjäger za brušenje manjših krožnih žag. Premer žaginega lista: maks. ca. 300 mm Fodpfxoulffto Ah Djgh

Stanje: zelo dobro (rabljeno), moč: 60 kW (81,58 KM), vrsta goriva: dizel, barva: oranžna, prva registracija: 06/2004, Leto izdelave: 2004, obratovalne ure: 3.150 h, Drive: Wheel Number of cylinders: 4 Unladen weight: 7,050 kg Working width: 168 cm Technical condition: very good Visual condition: very good Fodswywmzjpfx Ah Dogh Stock status: Expected soon Price: On request For further information, please contact Ernst van Hek. Hamm 3307HT VIO – Year of manufacture 2004 For sale is a Hamm 3307HT VIO single drum roller in perfect condition, directly from the first owner! • Year of manufacture: 2004 • Operating hours: 3,150 h • Operating weight: 7,050 kg • Engine: Deutz BF4M 1011F – 61 kW / 81.7 hp • Drum width: 168 cm • Equipped with vibration and oscillation (VIO system) • Exceptionally well-maintained machine – ready for immediate use! Inspection possible at any time.

Stanje: delavnici obnovljeno (rabljeno), ostri krožne žage do 800 mm Ø, 3 delovne hitrosti, odsesavanje brusnega prahu, novi električni kabli in vtiči, popolnoma razstavljen in obnovljen v delavnici Fgsdoxc Etxepfx Ah Deh

Stanje: rabljeno, Vibratory Feeder with Pneumatic Screwdriving Stand Eco Line Vibratory feeder, sorting device, bowl feeder, vibrating bowl, automatic screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl inner height: 70 mm Sorting rail width: 10 mm Mains connection: 230 Volt, 50 Hz Operating pressure: 6 bar (for separation and screws) Valve control voltage (pneumatics): 24 Volt - Stepless vibration speed controller = stepless conveying speed - Vibrating bowl in protective housing - with pneumatic feeding system Fgedpfxoxf Up Uo Ah Doh - Feed pulse via external electrical control - The feeder was used for supplying M5 x 12 mm screws - Some pneumatic hoses need replacing - Siemens S7-200 PLC CPU 224 MISSING Space requirement vibrating bowl L x W x H: 450 x 450 x 315 mm Weight vibrating bowl: 32 kg Screwdriving Stand WEBER Eco Line Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screw holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screw guide diameter: Ø 37 mm Distance screw guide to table: 135 - 465 mm - 1 pc flat cylinder FESTO, type DZF-32-125-P-A-SM - 1 pc flat cylinder FESTO, type probably DZF-32-30-P-A-SM - Screw feed frame on linear guide - 3 position sensors on cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriving stand dimensions W x D x H: 200 x 410 x 1050 mm Weight screwdriving stand: 35 kg good condition Total weight vibrating feeder and screwdriving stand: 67 kg Note: The original Siemens S7-200 PLC CPU 224 is missing (see photo control cabinet without PLC), therefore, in this condition, no automatic sequence is possible. The controller also managed the sequence for screw separation and the screwdriver itself. The vibrating bowl is fully functional without the PLC, the integrated bowl controller does not require PLC control. Operation Principle: Fasteners are filled in bulk into the bowl and are conveyed upwards via mechanical vibration (micro-throw principle). The vibrating bowl is switched on or off automatically depending on the fill level of the screw magazine. The screw is then fed with compressed air through a plastic tube to the downstream device. The feed pulse for each screw comes externally from the downstream device.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 3,1 kW (4,21 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 166 kg, Leto izdelave: 2025, Oprema: UVV varnostni pregled, Plaque vibrante Wacker Neuson DPU 2550 H, - NEUF - ! Poids 166 kg, fréquence 90 Hz, force centrifuge 25 kN, largeur de travail 500 mm, moteur diesel Hatz 1B20 de 3,1 kW, D'autres tailles sont disponibles ! Emplacement de la machine : entrepôt D-46514 Schermbeck. Avantages & points forts : ✔️ Plaque vibrante compacte et puissante pour les chantiers exigus Fgjdpfx Aexl Ta Ejh Dsh ✔️ Particulièrement adaptée aux travaux de pavage, tranchées pour tuyaux, préparation des fondations ✔️ Réversible – marche avant et arrière à commande hydraulique ✔️ Construction robuste, moteur diesel durable ✔️ Utilisation simple, faibles coûts d'entretien ✔️ Faibles vibrations grâce au timon de guidage ergonomique _____ Achat plaque vibrante Wacker Neuson DPU 2550 | plaque vibrante 25 kN | plaque vibrante diesel 500 mm | plaque vibrante réversible | Wacker DPU 2550 NEUF | plaque vibrante diesel Wacker Neuson | compacteur de sol espaces verts | plaque de pavage moteur diesel Hatz | acheter DPU 2550 H | plaque vibrante marche avant et marche arrière

Stanje: novo, Leto izdelave: 2025, The JMY-870 saw blade sharpener is an excellent tool for sharpening circular saw blades. The sharpener is equipped with a durable diamond grinding wheel, ensuring precise and effective sharpening. The solid cast iron construction guarantees stability during operation, while the adjustment of the tilt angle and the rake angle provides full control over the sharpening process. Additionally, rubber pads under the feet minimize noise, ensuring operator comfort. The unit comes standard with a 125 mm diamond grinding wheel and is suitable for sharpening blades ranging from 80 mm to 700 mm in diameter. Key Advantages of this Circular Saw Blade Sharpener - Equipped with a high-quality 125 mm diamond grinding wheel, ensuring exceptional precision when sharpening carbide-tipped blades. - The cast iron base provides stability during operation, so the machine remains steady and vibration-free during sharpening. - The sharpener features an adjustable support, enabling tilt adjustment from -35° to +45°, allowing precise alignment to the user's requirements. - An additional function is the ability to set the rake angle of the blade from +85° to -30°, accommodating various blade types. - Designed for operator comfort, thanks to rubber feet that make the machine operate almost silently, enhancing user experience. Application This sharpener is intended for use with circular saw blades. The device is intuitive and straightforward to operate, making it accessible even for users with minimal technical experience. The JMY-870 circular saw blade sharpener is a professional-grade tool that delivers superior sharpening quality and operator comfort. Its wide range of adjustments makes it the perfect choice for those who require a precise and efficient blade sharpening solution for various types of saw blades. THE SET INCLUDES A DIAMOND GRINDING WHEEL! Technical Specifications: - MIN/MAX BLADE DIAMETER: 80mm - 700mm - HORIZONTAL BLADE HOLDER TILT ADJUSTMENT: -35° to +45° - GRINDING SET INCLINATION: -20° to +20° - GRINDING WHEEL SPEED: 2850 rpm - GRINDING WHEEL DIMENSIONS: 125 x 10 x 13 mm - MOTOR POWER: 0.25 kW - SUPPLY VOLTAGE: 230 V - NET WEIGHT: 21 kg Fgsdou Tti Iepfx Ah Doh - MACHINE DIMENSIONS: 750 x 750 x 350 mm

Stanje: rabljeno, vrsta goriva: bencin, lastna masa: 85 kg, Leto izdelave: 2018, Motor: Honda GX160. Bencin. Dimenzije: 50 x 40 cm. Udarna moč: 1500 kg. S kompletom koles. Cena: 500 €, brez DDV. Fjdpfoxg Dpysx Ah Dogh

Stanje: zelo dobro (rabljeno), moč: 99 kW (134,60 KM), vrsta goriva: dizel, barva: rdeča, prva registracija: 10/2008, Leto izdelave: 2008, obratovalne ure: 7.497 h, Splošne informacije Letnik modela: 2008 Serijska številka: H1800823 Tehnične informacije Število valjev: 4 Prostornina motorja: 4.038 ccm Fsdpfxsxdl Hnj Ah Dogh Pogon: kolesni Lastna teža: 11.720 kg Funkcionalno Delovna širina: 213 cm CE oznaka: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Po dogovoru Dodatne informacije Za več informacij kontaktirajte Ernsta van Heka.

Stanje: dober (rabljeno), Vibratory bowl for screwdriving technology Fgedpfxjg Andus Ah Djh Bowl diameter: 320 mm

Stanje: rabljeno, Vibračný špirálový podávač / Triediace zariadenie / Špirálový podávač / Vibračný podávač RNA Vibračná miska, triediace zariadenie / podávanie skrutiek vibračným podávačom pre skrutkovaciu techniku Podávací systém, podávacie zariadenie Výrobca: RNA Rhein-Nadel Automation GmbH Typ: SRC-N 250-2L Sériové číslo: Rok výroby: cca 2000 Priemer misky dole: 300 mm Priemer misky hore: 350 mm Vnútorná výška misky: cca 25 mm Šírka triediacej dráhy: cca 30 mm Celková výška (pohon + miska s triediacou dráhou): 380 mm Frekvencia vibrácií: 100 Hz / 6000 ot./min. Napájanie: 230 voltov, 50 Hz - Riadiaca jednotka RNA, typ ESG 90, pre nastaviteľnú rýchlosť vibrácií - Podávač bol používaný na podávanie automobilových tavných poistiek Pôdorys (Ø x V): 420 x 390 mm Hmotnosť: 52 kg Dobrý stav Špirálový podávač sa vždy skladá z dvoch hlavných komponentov: Fgjdpfoux Shvox Ah Dsh 1) Triediaca miska, v ktorej sa diely orientujú 2) Pohon, ktorý mechanickými kmitmi vytvára vibrácie v triediacej miske a tým uvádza diely do pohybu.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 5,4 kW (7,34 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 181 kg, Leto izdelave: 2025, Oprema: UVV varnostni pregled, Wacker Neuson vibrační deska DPU 3050 H – NOVÉ! Fsdpfx Ahjxhcdfs Dogh Hmotnost: 181 kg, Frekvence: 90 Hz, Odstředivá síla: 30 kN, Pracovní šířka 500 mm, Dieslový motor Hatz 1B30 s výkonem 4,2 kW, K dispozici také další velikosti! Umístění stroje: Sklad D-46514 Schermbeck. _____ Wacker Neuson DPU 3050 H, koupit DPU 3050, vibrační deska 30 kN, vibrační deska 181 kg, nová dieselová vibrační deska, dieslová vibrační deska Wacker, Wacker vibrační deska 500 mm, DPU 3050 Hatz 1B30, vibrační deska pracovní šířka 500 mm, hutnící stroj 30 kN, reverzibilní vibrační deska, Hatz dieselová vibrační deska, vibrační deska 4,2 kW, koupit Wacker Neuson vibrační desku, dieselová dlažební vibrační deska, hutnící deska Wacker Neuson, DPU dieselová vibrační deska, Wacker DPU nové, stavební stroje Schermbeck, vibrační deska ihned k dodání, Wacker vibrační deska skladem.

Stanje: rabljeno, Rotary Table Plate Conveyor 1700-1600-Ø1500 with Diverter 1330-100 RA2026 Technical Data – Rotary Table: Table Length: 1700 mm Table Width: 1600 mm Rotary Plate Diameter: 1500 mm Construction Height: 100 mm Preset Table Height: 790 mm, lowerable to 590 mm Electrical Data SEW Motor: 380-415 V, 0.37 kW Electrical Data Drum Motor: 24V Technical Data – Diverter: Total Length/Belt Length: 1330 mm Belt Width: 100 mm Construction Height: 840 mm Electrical Data: 380-415 V, 0.25 kW Fjdpfx Ahorc D Nro Dsgh Scope of Supply: Rotary table with feet Side guide Diverter with stand Optional Accessories: Photoelectric sensors 24V power supply for drum motor Control panel/Control system Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For tailored, professional consultation, simply contact us. You can reach us by phone or email. We are pleased to assist you in the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: dober (rabljeno), Leto izdelave: 2005, For sale are 2 Rösler vibratory finishing machines, model R 420-So, including vibratory feeders, tilting devices, and enclosures. Both units must be purchased together as control is managed via a shared control cabinet. - Batch capacity: 420 l - Power requirement per centrifuge: 4.5 / 7.5 kW - Speed per centrifuge: 900 / 1485 rpm Fgedow R S D Uspfx Ah Deh

Stanje: dober (rabljeno), Pan diameter 600 mm Vibration: adjustable Fodpfsh Rfffjx Ah Dsgh

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating Bowl, Sorting Device / Screw Feeding with Vibratory Feeder for Screw Technology Feeding System, Feeding Device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl Diameter (lower): 250 mm Bowl Diameter (upper): 380 mm Bowl Internal Height: approx. 70 mm Sorting Track Width: 30 mm Total Height (Drive + Bowl with Sorting Track): 390 mm Vibration Frequency: 100 Hz / 6,000 rpm Power Supply: 230 Volt, 50 Hz - RNA Control Unit, Type ESG 90 for adjustable vibration speed - Vibrating bowl with rubber lining - The feeder was used for feeding automotive blade fuses Required Footprint Ø x H: 420 x 390 mm Weight: 50 kg Fjdpfjuqrahox Ah Dogh Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl through mechanical oscillations, thereby moving the parts along.