Naprava za temperiranje, enokrožni temperirni sistem

WITTMANN MTC Primus-C90 F27

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW *Dimensions: Gbjdpfx Abog Ewwrsrsu - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Display – Demag Year of manufacture: approx. 2003 Gbodpfohi Ttnox Abrou

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Gjdezh N Tyopfx Abrsbu Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Na voljo je 5 temperirnih naprav proizvajalca Wittmann, cena velja za 1 napravo. Gsdjy In Dyopfx Abrobu Medij: voda Obratovalna temperatura: maks. 90 °C Grelná moč: 9 kW Hladilna moč: 25 kW

Stanje: novo, Leto izdelave: 2026, The CORMAK SM150D belt grinder is an industrial machine designed for intensive use in manufacturing plants, metalworking shops, and tool rooms. This belt grinder for metal combines high grinding efficiency with an integrated dust extraction system, ensuring safety, cleanliness, and comfort during daily operation. Its robust steel construction and large worktable ensure stability and precision, even when processing large workpieces. Key machine features: - Two belt speeds (14.5 / 29 m/s) – Allowing speed adjustment to suit the material type and working requirements (for coarse or finishing grinding). - Integrated dust extraction system – Provides a clean and safe working environment without the need for external extraction units. - Stable steel frame – Effectively reduces vibrations, which improves repeatability and processing quality. - Large worktable (480 × 150 mm) – Enables comfortable handling of larger components. - Stepless grinding angle adjustment – Enables precise alignment of the belt to the workpiece. - Quick-change belt system – Reduces downtime and enhances work efficiency. Design and technology: The stationary CORMAK SM150D grinder is based on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The built-in extraction system guarantees high efficiency in removal of dust and grinding residues. The 2.8 kW motor delivers sufficient power for the most demanding machining tasks. Precision and operational efficiency: By utilizing a belt 150 mm wide and 2000 mm long, the unit offers a large contact area, which shortens processing time and increases efficiency. Two operating speeds allow for quick transitions between aggressive material removal and precise surface finishing. The ergonomic design and spring-loaded belt tensioning system maintain proper tension throughout the entire operation cycle. Applications: The CORMAK SM150D metal belt grinder is suitable for use in: - Production facilities machining steel, stainless steel, and aluminum - Welding and locksmith workshops - Surface preparation and finishing departments - Grinding of edges, welds, and flat surfaces Standard equipment: - Stable steel base with tilt adjustment - 2000 × 150 mm abrasive belt - Built-in extraction system with bag and Ø100 mm connections - Spark and dust protection covers - Adjustable protective guard Technical data: Abrasive belt dimensions (L × W): 2000 × 150 mm Belt speed: 14.5 / 29 m/s Motor speed: 1400 / 2800 rpm Motor power: 2.8 kW Dimensions (L × W × H): 700 × 540 × 1130 mm Weight: 90 kg Power supply: 400 V Gsdpfxjxrzgto Abrsbu Extraction port diameter: 2 × Ø100 mm Worktable dimensions: 480 × 150 mm Chip bag diameter: Ø 100 mm Chip bag length: 500 mm

Leto izdelave: 2004, stanje: rabljeno, Koch rezervoar za suh zrak 1x100 litrov, 1x200 litrov, 1x400 litrov z dodatnim ogrevanjem in regulatorjem Leto izdelave: 2004 Cena: 7.400,00 € Gbsdpfxsxltdws Abrju Kontaktna oseba: g. Rainer Eckerle

Leto izdelave: 1998, stanje: rabljeno, Desiccant Dryer Simar (item 2236) Gjdpfx Abeiicxmerjbu Simar Desiccant Air Dryer Model KT 100 with 2x 75 kg Tanks Year of manufacture: 1998 Price: €4,200 Contact person: Mr. Rainer Eckerle

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 18565 Manufacturer: DEMAG Godpsxhfuajfx Abrjbu Model: 150-610, System NC4 Year of manufacture: 2005 Clamping unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 500 x 500 mm Minimum mould height: 250 mm Daylight opening: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Dimensions and weight Dimensions (L x W x H): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional information: The hydraulic injection moulding machine of the Demag Ergotech System Series is a suitable plastics injection moulding machine for technical plastic parts as well as for automated series production. Thanks to its hydraulic drive system, the machine delivers powerful and stable injection performance, while the Demag NC4 control enables precise process management. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot data: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm Thanks to the robotic system, fully-automatic part removal, conveyor belt transfer, and automated series production are possible. Additionally, 2 complete spare plasticizing units / injection units (screw and barrel assemblies) are available. The machine was used reliably and without malfunctions in ongoing production until it was dismantled.

Leto izdelave: 2008, stanje: rabljeno, Gerco dry air dryer GTT 201 liters 8.5 kW Year of manufacture: 1991 Gsdpfsq Tb Iqsx Abrsbu Price: €1,650 Contact person: Mr. Rainer Eckerle

Stanje: rabljeno, Gerco dry air dryer GTT 201 E, 8.5 kW, 200-liter tank Year of manufacture: 2006 Gbodsq Tb N Iepfx Abrou Price: €3,750 Contact person: Mr. Rainer Eckerle