Enota za nadzor temperature / hladilnik

Single Temperiertechnik GmbH Chill Advanced C-25-L

*Technical Specifications:
- Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C
- Supply temperature range: +5°C to +30°C
(Optionally, lower temperatures down to -5°C possible)
- Air flow rate: 8,000 m³/h
- Max. air inlet temperature: +30°C
- Optional heating capacity up to 24 kW

*Pumps:
- Delivery rate up to 150 l/min
- Delivery pressure up to max. 4 or 7 bar
- Motor power: 1.1 or 2.2 kW

*Dimensions:
- L/W/H: 1,450 mm x 750 mm x 1,680 mm
- Unladen weight: approx. 480 kg
- Circulating medium connection: DN 32 internal thread

Ledpfx Alog Ewwro Noaa
*Details & Highlights:
- Internal refrigerant: R 123 a
- Power supply: 380-425V/50Hz

- Control and regulation unit SBC-T
- Setpoint and actual value display, alarm indication
- Fully hermetic reciprocating compressor
- Refrigerant collector with safety valve according to DIN EN 378
- Capacity control
- Frost protection monitoring
- Flow monitoring
- Protective grid over condenser
- Oil sump heater
- Draining device
- Level monitoring via float magnetic switch
- Installed dirt trap in the return line of the circulating medium
- Bypass valve between supply and return for pump protection, set at the factory
- High and low pressure limiter according to DIN EN 378
- Stainless steel tank, capacity: 80 litres, open system, fully insulated
- Self-supporting chassis with castors, mobile
- System designed for indoor installation
- Control cabinet: IP 54

Other performance categories available upon request. Visit our website for further details.

*This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.