International 434 nakup rabljenega (8.805)

Leto izdelave: 1981, stanje: dober (rabljeno), Manufacturer: National Broach Fjdohad Avspfx Apropk Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Fjdpfx Apogyd T Eerjpk Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Leto izdelave: 1964, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Fjdet Dv I Aepfx Aprepk Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI6DT Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Fsdpfx Apogyd Sverjpk Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Fpjdpfxsgyd S Dj Aprok Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1960, stanje: nepreverjeno (rabljeno), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Fpjdpehu E Egjfx Aprsk Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Max. stroke: 1200 mm Fpodpfjhu E N Djx Aprsk Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Fpjdslpadyepfx Aprok Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices Fjdpfx Aotuuvzepropk • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1980, stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units Fedpfecdtpljx Apropk weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1960, stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations Fpedjui Sbjpfx Aprjk The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Leto izdelave: 1959, stanje: rabljeno, max. pressing force: 16 t max. stroke: 1250 mm Fpsdpj Rwa Uofx Aprjk cutting speed: 5.6 m/min return speed: 30 m/min

Leto izdelave: 1956, stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Fpodpfxodbmgms Aprok Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1951, stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 Fjdpfxsdcdrpo Apropk General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: Fpededffzfspfx Aprok The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1958, stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Fpsdpfx Aeda Ugieprok Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta orodja: VDI 40, skupna masa: 10 kg, VDI40 collet holder, extendable, with ER50 collets – 10 pieces • Extremely compact design for threads with critical lengths (length compensation) • Thread length is precisely controlled thanks to disengaging clutch • Single head for both internal and external threading • Integrated coolant supply (optionally with central coolant supply) Fpsdjxltzvopfx Aprjk • Available with • ANGST Flex or ESX (ER) collets • Sizes 1, 2, 3, 4, and 6 • All common shank types, e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 • Robust and durable Swiss quality products PAFIX Thread Cutting Head for CNC Machines • The PAFIX CNC head has been specifically developed for all machines with programmable forward and reverse feed to the tool holder (turret, spindle, etc.). It is extremely compact and features a positive-locking disengagement clutch that can be set to three different extraction lengths if required. • The head can be set to two different programmed tapping cycles. Both cycles ensure a certain amount of pitch compensation (float). To guarantee error-free thread cutting with a precise starting point and precise thread depth or length, spring thread pitch adjustment and overload slip clutches have been deliberately omitted. The PAFIX CNC allows quick changeover between the tapping head and the cutting head. Simply unscrew the clamping nut and replace it with the cutting head housing. Available with or without collets. The listed price is without ER50 collets. Collet set available upon request.

Leto izdelave: 1972, stanje: rabljeno, Max. pulling force: 10 t Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Broaching stations: 3 units Fedscdtnhjpfx Aprepk Passage width: 470 mm Distance between broaching stations: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via permanent magnet chip conveyor 1 hydraulic system, 1 work platform, electric-hydraulic shank and end-piece holder confirmation, automatic loading device

Stanje: rabljeno, Rotacijski navojni stroj, 8-postajna rotacijska miza. 1 kontrolna postaja, 1 vertikalna in ena horizontalna enota za izdelavo navojev. Z vodilno pušo s korakom 1 mm Chiron, enota za izdelavo navojev z vodilno pušo s korakom 0,7 mm, M 4. Ena odvzemna postaja, sistem za hlajenje. Fjdpfx Ajyl Ntpsprepk

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Fedehpqquspfx Apropk Max. tool diameter: Ø 95 mm Weight: 4.8 t

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse. Fsdpfxjcc D Dde Aprjpk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8151, premer vrtljive mize: 800 mm, višina brušenja: 750 mm, teža obdelovanca (maks.): 800 kg, skupna višina: 4.100 mm, skupna širina: 26.650 mm, skupna dolžina: 44.000 mm, dolžina pomika po osi Y: 750 mm, dolžina podajanja os Z: 550 mm, skupna masa: 13.000 kg, premer brusilnega koluta: 400 mm, premer diska: 400 mm, hitrost vretena za brušenje: 1.460 obr/min, premer brušenja: 800 mm, širina krmilne omare: 650 mm, vrsta vhodnega toka: Enosmerni tok, višina krmilne omare: 1.900 mm, dolžina elektro omare: 1.800 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 1.460 obr/min, obremenitev mize: 900 kg, premer obdelovanca (maks.): 850 mm, širina brusilnega kolesa: 60 mm, širina mize: 1.240 mm, moč: 35 kW (47,59 KM), hitro pomikanje X-os: 2 m/min, hitri pomik os Y: 100 m/min, hitri pomik na osi Z: 2 m/min, potrebna višina: 4.100 mm, zahteva za prostor dolžina: 5.100 mm, potrebna širina: 2.655 mm, Good day, For sale is a well-maintained and fully functional Sielemann cylindrical grinding machine suitable for surface grinding, internal grinding, and external grinding applications. The machine features a swiveling column with three different grinding heads, each designed for specific applications. Complete machine documentation is available and will be presented during inspection. The Sielemann offered here has been regularly serviced and maintained. The following components were recently replaced: - 3x New counterbalance cylinders - 1x New complete hydraulic power unit - New guideway covers - Rotary table group overhauled Technical Data: Machine length: 4,400 mm Machine width: 2,655 mm Machine height: 4,100 mm Machine weight: 13,000 kg Control cabinet width: 650 mm Control cabinet height: 1,900 mm Control cabinet length: 1,800 mm Grinding table diameter: 800 mm Grinding table load capacity: 800 kg Grinding table drive power: 0.21 - 14.5 kW Grinding table speed: 100 rpm (bidirectional) Grinding table workpiece clamping: Magnetic chuck incl. T-slots Z-axis travel (grinding table): 550 mm Maximum grinding height (Y): 750 mm Lubrication pump machine bed: 0.18 kW Lubrication pump machine column: 0.1 kW Leakage oil pump: 0.065 kW Hydraulic pump: 1.5 kW 1) External Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,450 rpm Grinding wheel: 400x50 mm Taper grinding spindle mount: D=65 mm Taper slope: 1:5 Feed rate (Y): 100 mm/min 2) Internal Cylindrical Grinding Head Spindle drive power: 5.5 kW Grinding wheel: variable Feed rate (Y): 100 mm/min 3) Surface/Flat Grinding Head Spindle drive power: 11 kW Spindle speed: 1,800 rpm Grinding wheel: 400x50 mm Taper grinding spindle mount: D=65 mm Taper slope: 1:5 Feed rate (Y): 100 mm/min Viewing appointments can be arranged at short notice by prior agreement! Best regards, R. Suckow / Managing Director Fpedpfsrntirjx Aprsk UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte-Stukenbrock Görlitzerstraße 9

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 2.184 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2407-463, največja hitrost vretena: 60.000 obr/min, število vreten: 3, kot vrtenja osi B (min.): −90 °, kot vrtenja osi B (max.): 15 °, TEHNIČNI PODATKI Hitrosti brusnih vreten Fpedoxtdfbopfx Aprok Vreteno 1: 60.000 obr/min Vreteno 2: 60.000 obr/min Vreteno 3: 45.000 obr/min Zasuk osi B: -90°/+15° PODROBNOSTI O STROJU Delovne ure vretena Vreteno 1: 11.278 h Vreteno 2: 2.184 h Vreteno 3: 2.841 h Glavni števec: 45.144 h OPREMA Merilna sonda (na 4. položaju vretena)

Leto izdelave: 2018, obratovalne ure: 303 h, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Notranja gravirna naprava, ki jo je Cerion GmbH dobavil leta 2018, je bila skoraj neuporabljena. Laser je kot nov. Nakupna cena naprave je znašala 49.000 €. Supra Laser Solutions GmbH je naslednik podjetij Cerion in Cericom GmbH na področju notranjega graviranja. Naprava je tovarniško testirana in popolnoma funkcionalna. Na napravo, vključno z laserjem, je 12-mesečna garancija. Fsdpexvc Igsfx Apropk

Stanje: rabljeno, Leto izdelave: 1958, Premer vretena: 40-420 mm Hod: 15-6500 mm Višina konic: 520 mm Dolžina obdelovanca: 6500 mm Premer obdelovanca: 1000 mm Tehnični podatki so podatki proizvajalca oz. operaterja, zato zanje ne prevzemamo nobene odgovornosti. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnega prostora, kapaciteta žerjava 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali vaše podjetje, pokličite nas. Dodatne ponudbe najdete na naši spletni strani. Ogledi možni po predhodnem dogovoru. Fjdpfx Asyqvgyopropk Veselimo se vašega obiska. Vaša ekipa Markus Hirsch