Stroj za notranje navoje

CHIRON

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194-03, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 400 mm, pomik po osi Z: 425 mm, širina mize: 450 mm, dolžina mize: 2.280 mm, TEHNIČNI PODATKI Pomik v osi X: 2.000 mm Pomik v osi Y: 400 mm Kwjdjyhnfcopfx Aacju Pomik v osi Z: 425 mm Skupno število osi: 3 Dolžina mize: 2.280 mm Širina mize: 450 mm Število T-utorov: 3 Razmak med T-utori: 150 mm Širina T-utora: 18 mm Vretenasta hitrost: 10.500 obr/min Število orodij: 20 Premer orodja: 65 mm Premer pri praznih sosednjih mestih: 180 mm Maks. dolžina orodja: 220 mm Maks. teža orodja: 8 kg PODROBNOSTI STROJA Krmiljenje: SIEMENS SINUMERIK 810 M Priključek: 50 Hz 3x 400 Volt Vretenasti motor: 18 kW Skupna priključna moč: 31 kVA Dimenzije & teža Dimenzije (D x Š x V): 4.000 x 3.010 x 3.040 mm Približna teža stroja: 7.200 kg OPREMA Hladilna naprava Transporter za odrezke Elektronski ročni kolesni pomik

Stanje: rabljeno, The machine has a defect on the main spindle CNC Vertical Machining Center CHIRON Type FZ 22 L high speed Machining center with FANUC Series 21-M CNC control Serial No. 179-98 Year of manufacture: 1999 Travel paths X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Kwodpfx Aaequhbgscsu Tool diameter 75 mm Diameter with free adjacent pockets 105 mm Tool change time Tool-to-Tool 2.0 sec. Tool change time Chip-to-Chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 working areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - ICS = Internal coolant supply through the spindle - Splash guard cabin with sliding door - Indirect linear measuring system - Coolant unit with side-mounted chip conveyor - Electronic handwheel Transport dimensions of the base machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport space required on truck L x W x H 12000 x 2470 x 2950 mm Transport weight on truck approx. 10 tons Weight 7.2 tons good condition – the machine has a defect on the main spindle

Stanje: dober (rabljeno), Leto izdelave: 2007, 5-osni CNC obdelovalni center Chiron Mill 800 Leto izdelave: 2007 Krmiljenje: Fanuc 18i MB5 Pomiki osi: X 800 / Y 500 / Z 550 mm Glavno vreteno: HSK-A63 Hitrost glavnega vretena: 20.000 vrt/min Vrtljivo vreteno: Vpenjalna glava Hainbuch SK65 BZI Hitrost vrtenja: 4.000 vrt/min Prehod: cca 65 mm Pogonska moč: min. 30 KVA / max. 50 KVA + Sistem za merjenje orodja Blum Laser Controll NT + Dodatni magazin (92 mest za orodje) + Sistem za hlajenje / papirni trakasti filter / notranje hlajenje vretena + Hladilnik vretena + Podajalnik palic Breuning RBK 10012 + Vložki 20/25/30/35/40/45/50 Maks. premer: 60 mm Brez izsesavanja oljne megle! Brez CO2 gasilne naprave! Demontaža stroja bo potekala konec marca 2026. Vgradnja transportnih zavarovanj, varnost podatkov in demontaža s strani podjetja Chiron. Ksdpfxoylnbxo Aacswu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 4, This 3-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to purchase this CHIRON DZ 18 W vertical machining center. Contact us for further information. Machine Benefits Technical Machine Advantages • Traverse speed (x-y-z): 75 m/min • Spindle distance: 400 mm Additional Information NC rotary table, type ATU 200, integrated in IWW/ Rotary feedthrough for IWW/ Axes in the workspace/ Twin-spindle headstock/ HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/ Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/ Feed drive X-Y-Z 75-75-75 m/min/ Automatic central grease lubrication/ Sinumerik 840D solution line, 10.4" color display/ Controller/ Control interface/ RemoteLine SIE/MTX/ On-screen maintenance management/ for machining inclined surfaces, SIEMENS/ Operating hours and workpiece counter on-screen/ Control cabinet cooler as a door-mounted unit/ 3-signal indicator light/ Open-design fluid tower/ Oil-free maintenance unit/ Cooling unit/ A u t t e l l e l e m e n t e/ Chip conveyor, scraper belt 1050 mm, rear/08, left/15, 18, 200 l/ Cooling system KF400-FKA900/900 l, 70 bar/ Bridge for cables and hoses/ Machine preparation for internal flushing/ Fixture flushing in the machining station/ 1 rinse gun outside splash guard/ Work area rinsing/ Additional equipment for extraction/extinguishing -/ Kjdpfxex D Nmxs Aacewu Additional equipment for pneumatics/hydraulics -/ 1860 workpiece carrier control, rough/ Hydraulic connection for 200 bar, single-acting/ Hydraulic connection for 200 bar, double-acting/ Regulated, lubricated purge air connection/ Hydraulic power unit extension/ Additional equipment for measurement/tool breakage detection -/ RLP40Q probe/ Whisker switch for tool breakage detection/ Additional devices for machine operation -/ Automatic loading door opening/closing/ Walk switch/ Additional equipment: NC control -/ M-function package/ Variable clamping logic - Siemens/ Powersave/ Siemens tool management/ Comfort cycle fixture flushing/ Revolutionary feed/ Loader interface with Profinet/ Direct door detection in 'open' position/ Commissioning and training/ Power supply/Compressed air 6 bar/ Ambient temperature 15°-40°C

Stanje: dober (rabljeno), Leto izdelave: 2014, Deli, prikazani z roko, niso vključeni. Ksdpfx Aaoyk E Dbscjwu Tehnični podatki so prikazani na slikah.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 29.801 h, potovalna razdalja osi X: 729 mm, pomik osi Y: 401 mm, pomik po osi Z: 361 mm, proizvajalec krmilnikov: FANUC, model krmilnika: Series 31i, največja hitrost vretena: 12.000 obr/min, število osi: 4, To 4-osno vertikalno obdelovalno središče CHIRON FZ 15 KWM HS je bilo izdelano leta 2012. Če iščete visokokakovostne možnosti rezkanja, razmislite o nakupu stroja CHIRON FZ 15 KWM HS, ki je na voljo v naši ponudbi za prodajo. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja Kwodpjx D Nmlefx Aacsu • Razpoložljivost: na voljo od 1. 7. 2025 • Obratovalna napetost: 400 V • Krmilna napetost: 230/23 V • Material, obdelovan na stroju: aluminij • Tip konusa: HSK-63 Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 24.209 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 400 mm, pomik po osi Z: 360 mm, proizvajalec krmilnikov: FANUC, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 7.500 W, število osi: 4, To 3-osno vertikalno obdelovalno središče CHIRON FZ 15 W Magnum HS je bilo izdelano leta 2014. Idealno za precizne obdelave, zagotavlja robustno konstrukcijo in zanesljivost. Razmislite o nakupu tega CHIRON FZ 15 W Magnum HS vertikalnega obdelovalnega centra. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Število orodij na vreteno: 48 • Nosilec orodja: HSK-A 63 • Največji navor glavnega vretena: 95 Nm Dodatne informacije Kwsdpjx D Nl Uefx Aacju Stroj je še vedno priključen na električno omrežje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 21.578 h, število osi: 4, Ta 4-osni stroj CHIRON DZ15KWM HS je bil izdelan leta 2011. Idealen za vertikalno precizno obdelavo, ta model ponuja robustno konstrukcijo in zanesljivo delovanje. Če iščete visokokakovostne rezkalne funkcije, razmislite o stroju CHIRON DZ15KWM HS, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. Dodatne informacije Stroj je še vedno priključen na elektriko. Kodpfx Aaox D Nmrjcswu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 630 mm, pomik osi Y: 530 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D solution line, število osi: 3, This 3-axis CHIRON DZ18W was manufactured in 2018. Ideally suited for vertical precision machining, this model offers a robust construction and reliable performance. Consider purchasing this CHIRON DZ18W vertical machining center. Contact us for further information. Additional Equipment • OPTIONAL: Robot, complete cell with conveyor belts, PLC, rotary station Machine Advantages Technical Advantages • Tool positions: 2x35 • Maximum tool length: 380 mm Additional Information Splash guard with fully enclosed work area / with loading door, electrically secured / with replaceable safety windows / working area partition with stainless steel slats / height 2,340 mm above floor, including machine lighting / mini control panel with start and reset button for M61/M62 pallet organization / integrated workpiece changer IWW 0/180° / for optimal chip flow with central partition made of sheet steel / workpiece change time approx. 3.5 seconds, weight-dependent, self-regulating / through self-learning speed control / transport load per side 0 – max. 250 kg / max. 120 kg weight difference between both table sides. Each table side is prepared for the installation of a rotary table kit. Distance between spindle holder and pivot point /WW at least 75 mm / Travel axes: X-axis 630 mm / Y-axis 530 mm / Z-axis 450 mm / Tank flushing system with coolant connection / NC rotary table, type ATU 200 / integrated into the integrated workpiece changer IWW 0/180° / with hydraulic clamping, holding torque 1,200 Nm / repeatability +5” with / faceplate Ø 225 mm, with centering Ø 60 -0.008 / counter bearing with hydraulic clamping, holding torque 800 Nm / on the rotary table and counter bearing side. Swivel radius 285 mm / 7th or 5th NC axis, plug-in ready / regulated pneumatic connection for purge air / regulated hydraulic connection for clamping / rotary union 2 x 5-fold / rotary table side: 4 x hydraulic/pneumatic, 1 x pneumatic / 4 x hydraulic/pneumatic on the counter bearing side, 1 x pneumatic / Working area - rotary table configuration / AF1 rotary table ATU 200 / AF2 rotary table ATU 200 / dual-spindle headstock / prepared for the installation of two main spindle motors with spindles / Kedpfjx D Nmfsx Aacowu spindle distance on X-axis 400 mm / main spindle drive with 2 AC motors / pneumatic, with tool clamp monitoring / 11.0 kW at 100% duty cycle / 25.3 kW at 15% duty cycle / Speed up to 12,000 rpm / Max. torque 140 Nm / drilling capacity 2 x 42 mm / in steel E355 / automatic tool changer / with robust, fully enclosed pick-up chain magazine / 2 x 35 tool stations / HSK-A 63 DIN tool holder 69893 / max. tool width 78 mm / tool width with free adjacent stations max. 140 mm / max. tool length 380 mm / max. tool weight 8.0 kg (max. magazine load 240 kg) / tool change time approx. 0.9 s (control dependent) / chip-to-chip time approx. 2.2 s (control dependent) / feed drive for X, Y, and Z axes / digital drives with direct position feedback, overpressure system / rapid traverse speed 75 – 75 – 75 m/min / axis acceleration 1.0 – 1.4 – 1.6 g / SIEMENS CNC control 840D solution line / including 10.4" TFT color display / full keyboard / control panel OP010S / 12801 (TCU / NCU 720.3, 1 channel) / user interface Operate / NC RAM 3 MB (max. 1 MB available) / (max. 200 programs available) / for executing machining programs according to DIN 66025 / CF card with 8 GB memory capacity (max.

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 12.142 h, Funkcionalnost: omejena funkcionalnost, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Naprodaj je obdelovalni center Chiron FZ22 W z dvema paletama, letnik 1989. Stroj dela natančno. Občas pride do napake pri menjavi orodja – orodje ni pravilno pozicionirano v vretenu. Uporablja se s pritrjevanjem SK40. Krmilnik Sinumerik 810. Priložen je transporter za ostružke in sistem za obdelavo vode Knoll AE 1058.009. Vsa tehnična dokumentacija je priložena. Po dogovoru je možen preizkus pod napetostjo, trenutno ni v proizvodnji. Pri nakladanju ne moremo pomagati. Kjdpfx Aaoymbdiecjwu