Index Ms 42 C nakup rabljenega (138)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 800 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 400 mm, največja hitrost vrtenja: 4.000 obr/min, INDEX GU800 CNC stružnica z osjo C, pogonskimi orodji in transporterjem za odrezke Opis: Naprodaj je INDEX GU800 CNC stružno-rezkalni stroj z obsežno opremo. Stroj je popolnoma delujoč, teče gladko in nima napak. Oprema in podrobnosti: - Siemens Sinumerik krmilje z barvnim zaslonom - Stružna vretena z osjo C za rezkanje - Revolver z 16 orodnimi mesti, vključno s pogonskimi orodji - Prisoten konjiček - 2-stopenjski menjalnik vretena (ročni prestavni jermen) - Orodni nosilec VDI40 - 250 mm vpenjalna glava Forkardt - Premer vrtenja: maks. 500 mm - Dolžina struženja: maks. 1000 mm - Premer izvrtine vretena: 65 mm - LED notranja osvetlitev - Transporter za odrezke vključen - Dokumentacija in navodila za programiranje priložena Stanje: ✔️ Delujoč ✔️ Takoj pripravljen za uporabo Ogled in prevzem: Psdpexzqccefx Adyspl Po dogovoru – stroj je priključen in ga je možno preizkusiti v delovanju. Lokacija: Wathlingen / Celle (Spodnja Saška) POVPRAŠEVANJA IZKLJUČNO PO E-POŠTI !!!

Stanje: dober (rabljeno),

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Pedpfsxt U N Rsx Adyjpl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Pedpfx Asxt U N Dsdyepl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Psdjxt U Nwspfx Adyspl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Ppedpfxjxt U Nqj Adyjl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Psdpoxt U Nkefx Adyepl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Ppodpfx Adext U Iyeyjl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B60 Ppjdpfsxt U Imsx Adysl

Stanje: rabljeno, Enovretenski stružni avtomat INDEX B60 Ppedpfxsxt U Igj Adysl

Stanje: rabljeno, Enovretenski avtomatski stružni stroj INDEX B30 Ppjdpfx Adjxt U Hveysl

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter: 60 mm Turning length: 200 mm Number of slides: Podpfxot Hw Ato Adyepl Total power requirement: 20 kW Machine weight approx.: t Space requirement approx.: m Bore diameter: 30 mm, Control: INDEX C 200, Spindle speed: 7,500 rpm, Back-side machining, 3-jaw chuck, driven tools, Workpiece loader: WHU 80

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Control system SIEMENS SINUMERIC 840 C Total power requirement 40 kW Machine weight approx. 6,500 kg Space requirement approx. m I N D E X CNC lathe with 2 turrets, bar feeder and workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture 1998 #810 728 _____ Bar capacity approx. 42 mm Workpiece swing diameter approx. 400 mm Chuck diameter 200 mm Turning length / centre distance approx. 400 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 400 / 120 mm Turret slide travel Z2 (longitudinal) / X2 (cross) 400 / 105 mm Feed force for Z/X axis 15 Nm Rapid traverse speed, tool turret 1 & 2 22.5 m/min Turret tool stations / max. speed 14 x VDI 30 / 6,000 rpm Spindle speeds / tool speeds up to max. 7,000 rpm Maximum spindle torque 95 Nm Spindle drive / tool drive 20 / 5.5 kW Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,500 kg Pedpfxst Hw Rke Adyspl Accessories / Special equipment: • SIEMENS CNC 7-axis contouring control, type SINUMERIC 840 C, for the following axes: Turret 1 and Turret 2, C-axis, sub-spindle axis and C-axis sub-spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand-held control unit, • C-axis for main spindle as well as automatic spindle switching and alignment device, • 1 sub-spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loader type MBL for bars up to 3 m in length • Hydraulic collet clamping device on main and sub-spindle • 2 x tool turrets with 14 stations for VDI 30 tool mounting and 14 powered tool positions for milling and drilling operations, various tool holders, drill breakage detection in the chuck area, ideal for cross-drilling (!) • Workpiece handling system type WHU with linear gripper but without storage system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system, • Driven angular tools, approx. 20 pcs. in total, etc. Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Stanje: rabljeno, Leto izdelave: 1995, Drehdurchmesser 300 mm Drehlänge 710 mm Steuerung SIEMENS SINUMERIC 840 Gesamtleistungsbedarf 40 kW Maschinengewicht ca. 6000 kg Raumbedarf ca. m I N D E X CNC-Drehmaschine mit 1 Revolver und Reitstock sowie CNC-Steuerung Typ C 200 - 4 SIEMENS Typ: G 300 Baujahr: 1995 Nr.: 5000 65 Hauptspindelbohrung: ca. 90 mm Werkstück-Umlauf-Ø: ca. 400(590) mm Dreh-Ø bei Futterarbeiten: ca. 300 mm Drehlänge / Spitzenweite: ca. 710 mm Verfahrweg Revolver-Schlitten Z1 (längs) / X1 (quer): 710 / 140 mm Eilganggeschwindigkeit Werkzeugträger 1: 20 m/min Werkzeugrevolver mit 12 Positionen für Werkzeughalter nach ISO/DIN 30 mm Vorschubkraft für Z-/X-Achse: 8/13 kN Spindeldrehzahlen / Werkzeugdrehzahlen stufenlos bis max.: 5.000 U/min Drehmoment an der Spindel bei 100% ED max.: 275 Nm Spindelantrieb / Werkzeugantrieb: ca. 28 kW Gesamtantrieb: ca. 40 kW - 400 V - 50 Hz Gewicht: ca. 6.000 kg Zubehör / Sonderausstattung: • SIEMENS CNC-3-Achsen-Bahnsteuerung Typ SINUMERIC 840C bzw. INDEX C 200-4 für die Achsen: Revolver 1 = X/Z sowie C-Achse = Spindelorientierung. Steuerpult links schwenkbar angebaut • Ausricht- und Schalteinrichtung für die Hauptspindel • Hydraulisches 3-Backenfutter FORKHARDT KFD-HS 250 mit zahlreichen Spannbacken, max. 5.000 U/min • INDEX-Revolver mit 12 Werkzeugplätzen für DIN 30 Werkzeughalter, ca. 40 verschiedene Werkzeughalter als Zubehör, Vorbereitet für angetriebene Werkzeuge, Antrieb über Motor der Schalteinrichtung Ppodpfot Hw Susx Adysl • Hydraulischer Reitstock mit Exzentrizitätskorrektur, Pinole 60 mm, über Fußschalter • KNOLL fahrbarer Späneförderer mit Kühlmitteleinrichtung und HD-Pumpe • Schiebetür vorne, ansonsten komplette Umhausung, Ölskimmer Ideal für Wellenbearbeitung oder Futterteile. Sehr stabile Ausführung!

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500358, stružna dolžina: 1.250 mm, premer struženja: 300 mm, moč vretenovega motorja: 43 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, INDEX G300L with Promot portal loader. The machine is still in production and under power. The Promot loader is equipped with 2 rotary indexing conveyors, each with approx. 30 pallet positions. The machine features high-pressure coolant supply (40 bar), a paper band filter, and a tool changer. Further information available by email. Pedpfxeu Nmq He Adyopl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 080005, • Swing diameter over carriage: 1920 mm • Center height: 1300 mm • Distance between centers: 2000 to 30,000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear stages: 4 • Spindle nose: A2-15 Pedpfswab Rdjx Adyopl • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (optionally up to 610 mm) • Turret type: Servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30,000 mm • X-axis ballscrew: 63 mm x P10 • Z-axis ballscrew: 63 mm x P10 (above 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (optionally up to 360 mm) • Tailstock quill stroke: 250 mm (optionally up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Stanje: dober (rabljeno), Index GE42 Ppedjfbup Rjpfx Adyjl Clamping Cylinder GG2713.2101 Good condition

Stanje: zelo dobro (rabljeno), Index MS42C HBF bar guide Ppedsfdr R Uspfx Adyel Oil distributor Flaps with clamping screws

Stanje: generalkompletno obnovljen (rabljeno), Index ER 25 Ppodpsfc Rmcjfx Adyjl Bar turning attachment GT 2351.1300 3 units in stock

Stanje: novo, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Signs of storage Pedpfxewcq Tyo Adyjpl

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Podpfx Adot U R Hzjyopl Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 510864, stružna dolžina: 200 mm, CNC Turning Machine INDEX G200 Overhauled: 2017 Machine number: 510864 Max. turning length: 200 mm Bar feeder: INDEX MBL Main Spindle Collet clamping bore: 42 mm Spindle diameter at front bearing: 85 mm Ppsdoulhinspfx Adysl Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Max. nominal turning diameter: 200 mm Max. swing diameter: 420 mm Power Pmax 100%: 7.5/13/20 kW Torque Mdmax 100%: 35/61/95 Nm Speed: 6300 rpm Counter Spindle Collet clamping bore: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Power Pmax 100%: 7.5/13 kW Torque Mdmax 100%: 35/61 Nm Speed: 6300 rpm Min. distance to collet: 15 mm Longitudinal travel: 445 mm Rapid traverse: 22.5 m/min Cross Slide 1 XZ (top) XZ travel: 120 x 400 mm Feed force: 5000 N Cross Slide 2 (bottom) XZ travel: 105 x 400 mm Feed force: 5000 N Further information available upon request!

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2002, Funkcionalnost: nefunkcionalno, vrsta vhodnega toka: trifazni, skupna masa: 17.000 kg, Ponujamo ta pokvarjen CNC stružni stroj INDEX G400, letnik 2002. Tip stroja: G400 Številka stroja: 650036 Leto izdelave: 2002 Napetost/frekvenca napajanja: 3 faze / 50 Hz Napajalna napetost: 400 V Krmilna napetost: 24 V Nazivni tok: 204 A Nazivna moč: 120 kW Teža ležišča: 700 kg Teža stroja: 17000 kg Ppjdpfsx S Ir Esx Adyol Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer vretena: 90 mm, število mest v zalogovniku orodij: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses for the drag chains of Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: Taper No. 8 Ppsdpovitznefx Adysl C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven: 12 / 6 Coolant system Type: Knoll unit with paper band filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4, radial and axial - Numerous static holders CDI-Capto C4, radial and axial

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500641, stružna dolžina: 710 mm, premer struženja: 300 mm, potovalna razdalja osi X: 215 mm, pomik osi Y: 180 mm, pomik po osi Z: 710 mm, skupna višina: 2.150 mm, skupna dolžina: 2.150 mm, skupna širina: 3.160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore with collet clamping: 65 mm Spindle diameter at front bearing: 110 mm Max. speed: 5,000 rpm Spindle nose ISO 702/1 Size: 6 Chuck diameter: 250 mm Max. torque (100%): 275 Nm Max. power (100%): 43 kW Tailstock electrically traversable Centre distance (710): 740 mm Max. thrust force (electric): 10,000 N Cross Slide 1 XYZ (upper) Travel X-axis: 215 mm Travel Y-axis: 180 mm Travel Z-axis: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse speed X-axis: 20 m/min Rapid traverse speed Y-axis: 7.5 m/min Rapid traverse speed Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Turret Ppedpfx Ajwxw Upedyol Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weight Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Installation area (710) without bar feeder: 4,140 mm x 3,570 mm Weight (710): approx. 6,500-7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main fuse: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Finished part removal device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height 1,250 mm Coolant fine filtration hydrostatic paper band filter Vacuum rotary filter W-UAT-106A MMS system LUBRIX 750