Center CNC za struženje in rezkanje

INDEX G 400

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2002, Funkcionalnost: nefunkcionalno, vrsta vhodnega toka: trifazni, skupna masa: 17.000 kg, Ponujamo ta pokvarjen CNC stružni stroj INDEX G400, letnik 2002. Tip stroja: G400 Številka stroja: 650036 Leto izdelave: 2002 Napetost/frekvenca napajanja: 3 faze / 50 Hz Napajalna napetost: 400 V Krmilna napetost: 24 V Nazivni tok: 204 A Nazivna moč: 120 kW Teža ležišča: 700 kg Teža stroja: 17000 kg Hnodpfx Afsx S Ir Ee Teg Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm Hnedpfxsxp Hmas Af Tsg - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 4 Hitrost vretena: 3000 min⁻¹ Moč motorja vretena: 67 kW Pomik Pomik osi X: 640 mm Pomik osi Z: 2000 mm Pomik osi Y: 210 mm Maks. kot osi B: 360 ° Pomik osi C: 360 ° Orodja Hjdsx D D Ecepfx Af Tsng Maksimalna masa: 5 kg Ta 4-osni horizontalni stružni stroj Index G 400 je bil izdelan leta 2008. Ima maksimalni premer struženja 630 mm, obdelovalno dolžino do 2000 mm in omogoča obdelavo obdelovancev do mase 300 kg. Opremljen je z visokohitrostnim rezkalnim vretenom do 6000 vrt/min in glavnim vretenom do 3000 vrt/min, kar zagotavlja robustne zmogljivosti obdelave. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Index G 400. Za več informacij nas kontaktirajte. Področja uporabe Struženje

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Na voljo je pokvarjen CNC stružno-rezkalni stroj Index z glavnim in nasprotnim vretenom. Pomiki X/Y/Z: 630mm/210mm/2000mm, premer struženja: 630mm, dolžina struženja: 2000mm, hitrost vrtenja: 3000obr/min/6000obr/min, največja masa obdelovanca: 300kg, premer vpenjalne glave: 315mm/400mm, vpenjalo orodja: HSK-63A, število orodij: 2x32. Dimenzije stroja X/Y/Z: ca. 6500mm/3200mm/2800mm, teža: ca. 23000kg, krmilje: Index C200-4D (Siemens Sinumerik 840D). Kroglasti vreten je pokvarjen. Na voljo je dokumentacija. Ogled na lokaciji je možen. Hodpfx Asxyzgcef Teng

Stanje: novo, 10T Premium Ramp, 2m Usable Internal Width, TM-GROUP – The Best Choice on the Market. ⭐️ Galvanized approach grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 mm - ELECTRIC and manual height adjustment, range: 1m – 1.6m - Galvanized and reinforced approach grating - Reinforced ramp railings on both sides - Full rubber transport wheels - Central ramp handle allows movement with a forklift - Adjustable angle and height of lip plate - Double-sided, reinforced support legs - Movable ramp components equipped with grease fittings - Ramp also equipped with a winch ✅ Approach Grating: - Galvanized grating with anti-slip grooves. Provides secure and safe surface. Both forklift and pedestrian use are guaranteed optimal grip and stability. Competing products mainly offer ramps with an approach section made of sheet metal covered with mesh. Our product features a true grooved grating – a much more durable solution, which allows dirt from forklift wheels to fall through, and prevents forklift skidding. ✅ Forklift latch – possible mounting on both sides: - Convenient and quick attachment for a forklift enables ramp transport in all directions. The specially designed handle allows for maneuverability even in confined spaces. Hnodowa Smpjpfx Af Tjg ✅ Chain for connecting to truck, railway wagon, or fixed warehouse ramp: - Sturdy steel chain is another advantage of our ramp, providing additional safety and preventing ramp shifting during loading operations. ✅ Solid side railings: - Safety railings can be removed to install a frame or canopy (canopy is optional). ✅ Electric ramp height control: - Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V and can be operated from a standard socket. ✅ Dual-action manual pump: - Hydraulic pump for height adjustment when electric power is unavailable – dual-sided lifting. This is an excellent solution for operation under any conditions. ⭐️ Available variants: ⭐️ - Driveway width options: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus. - Mobile ramps with 10t, 15t, 20t, and 25t load capacity. - Approach grating thickness: 3 – 5 cm. - Colours: red, blue, black, and green (custom colours available upon request) - Mobile ramp with tarpaulin cover. As a manufacturer, we can produce ramps according to special, individual orders – with various dimensions, load capacities, or custom versions. Need a tailor-made solution you can't find among published listings? Contact our specialist. Tags: Dock ramp, unloading ramp, loading ramp, mobile ramp, loading dock, dock leveler, mobile dock ramp, mobile loading ramp.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Free workpiece length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Tool holder: VDI 40 Hnjdpfxouhbpfs Af Tog - Travel range X/Z: 320 x 2,000 [mm] - Travel range Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Tool holder: VDI 40 - Travel range X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 137 [kW] WEIGHT AND DIMENSIONS - Floor space required: 9,000 x 3,500 [mm] - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34,274 [h] EQUIPMENT - Control system: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: right

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machining Centre - Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and cutting, by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Hodpev Nxbyofx Af Tjng Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine positions: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping area with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Hodpfxsvivx Ne Af Tjng Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 Hnedeuha U Hspfx Af Tsg MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. workable length: 195 mm - Spindle speed: 10,000 rpm - Spindle drive power: 8.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 25.4 mm - Spindle speed: 10,000 rpm - Spindle drive power: 8.2 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 rpm TOOL HOLDER 2 - Number of positions: 8 SECONDARY MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 2,912 x 1,300 mm - Machine height: 1,720 mm - Machine weight: 2,400 kg MACHINE HOURS - Power-on hours: 44,140 h - Operating hours: 28,118 h - Spindle hours: 15,281 h EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Powered tooling motors at: S11, S51 - Powered guide bushing - Parts removal unit - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer.

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Hnjdpsfh R N Defx Af Tsg Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters