CNC avtomatska stružnica

INDEX G400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 640 mm, pomik osi Y: 210 mm, pomik po osi Z: 2.000 mm, moč vretenovega motorja: 67.000 W, skupna višina: 2.591 mm, skupna širina: 2.199 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 6.300 mm, teža orodja: 5.000 g, kot vrtenja osi B (max.): 360 °, kot vrtenja osi C (maks.): 360 °, število osi: 4, This 4-axis horizontal lathe, the Index G 400, was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight of up to 300 kg. Equipped with a high-speed milling spindle with 6,000 rpm and a main spindle speed of 3,000 rpm, it offers robust machining capabilities. Consider the potential of purchasing this horizontal lathe Index G 400. Contact us for further information. Main spindle 0102 with direct drive Maximum material throughput: 102 mm Maximum speed: 3,000 rpm Front bearing diameter: 170 mm Variable hollow shaft motor Power at main spindle D102: Power at 100/40% duty cycle: 53 kW/68 kW Torque: 675 Nm/900 Nm Work spindle orientation and gear shifting D102 2.5° indexing steps by means of index plate Hydraulically actuated through-hole chuck D102 with analog clamping path monitoring Material clearance: 102 mm Stroke: 48 mm Maximum clamping force (tension/compression): 10,900 dN Multi-stage clamping pressure device Clamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. To switch to a lower clamping pressure, a chuck release movement is required. Turret 1 (standard equipment) Cross-slide X, Z, turning length 2000 mm, internal coolant supply with shut-off valve, ball screws D=40 mm on the X-axis, D=50 mm on the Z-axis. Axis drives protected by overload couplings, counterweight system for both X and Z axes Travel range (mm): 320 (X) / 2000 (Z) Rapid traverse speed (m/min): 20 (X) / 40 (Z) Feed force (N): 14,000 (X, Z) X-axis measuring system: Glass scale (absolute) Z-axis: ROQ encoder (absolute) X-Y-Z-B Housing (WT1) Turret with AC motor, positioned via spur gear, hydraulically locked Y-axis quill, hydrostatic bearing, lockable via spur gear Ball screw D=40 mm Overload coupling Travel: 220 mm Rapid traverse speed: 12 m/min Dcedjx D D Ecspfx Afnsd Feed force: 24,000 N ROQ encoder (absolute) B-axis drive with AC motor Swivel angle: 360° Tool drive unit with two clutches: Maximum speed: 6,000 rpm Power (25% at n=6,000): 17 kW Maximum torque (25%): 37 Nm Disc turret with 12 stations on cross-slide 1 Tool holder system DIN 69880-40x63 Increased repeat accuracy when changing tools due to additional W-grooves Multifunction unit on cross-slide 1 Maximum speed: 6,000/1,500 rpm Gear ratio: i=4 Torques: 36/144 Nm Tools: SK50 Front bearing diameter: 75 mm Internal coolant supply, disc spring clamping Tool carrier 2, right – X, Z Turning length 2000 mm, preferably for sub-spindle machining with internal coolant supply and shut-off valve, turret controlled via AG motor, ball screws D=50 mm for Z-axis, D=40 mm for X-axis. Axis drives protected by overload couplings, counterweight system. Turret head oriented to the right towards sub-spindle.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Dedpfx Ajv Ehbbsfnjcd Machine weight approx. 7,000 kg with robot cell

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2002, Funkcionalnost: nefunkcionalno, vrsta vhodnega toka: trifazni, skupna masa: 17.000 kg, Ponujamo ta pokvarjen CNC stružni stroj INDEX G400, letnik 2002. Tip stroja: G400 Številka stroja: 650036 Leto izdelave: 2002 Dsdpfex S Ir Eox Afnecd Napetost/frekvenca napajanja: 3 faze / 50 Hz Napajalna napetost: 400 V Krmilna napetost: 24 V Nazivni tok: 204 A Nazivna moč: 120 kW Teža ležišča: 700 kg Teža stroja: 17000 kg Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle Dsdpjt U R Hzsfx Afnjcd - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1276, CNC vroče radialno kovanje GFM SX-13 Leto izdelave: 1974 / 2022 Nova krmilna enota PLC SIEMENS S7 Številka stroja: 1276 Število kladiv: 4 Kovalna sila posameznega kladiva: 160 ton Število udarcev kladiva na minuto: 700/min Dolžina kladiva: 240 mm Območje nastavitve premera: 80 mm Največji premer za kovanje: - Konstrukcijsko jeklo, okrogel prerez: Ø 130 mm - Kvadratni prerez: Ø 115 mm Dcsdpfxoq U R T No Afnod Najmanjše dimenzije za kovanje: Ø 25 mm Maks. hod manipulatorja A: 6820 mm Maks. hod manipulatorja B: 7150 mm Največja dolžina obdelovanca: 6000 mm Hitrost manipulatorja pri hitrem pomiku: 400 mm/s Skupna priključna moč: 300 kW, 380 V, 50 Hz Dimenzije stroja: Višina kovanja nad tlemi: 615 mm Skupna višina stroja nad tlemi: 1665 mm Skupna dolžina stroja: 32.670 mm Skupna dolžina temeljev: 33.400 mm Skupna širina stroja (brez pomožne opreme): cca 3885 mm Skupna širina temeljev: 16.000 mm Skupna masa stroja: 84.000 kg

Leto izdelave: 1998, stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Dcsdpfxjd Dhw Nj Afnjd Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Dcedpjwxz D Uefx Afnsd Težka konstrukcija ogrodja Vzdolžno pomikanje X-os: 1800 mm Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Djdpfjvx Uvfjx Afnscd Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 rpm - Spindle drive power: 7.6 kVA LINEAR AXES - Travel distance X/Y/Z axes: 500 / 410 / 610 mm TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 sec TABLE - Table size: 650 x 400 mm - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total drive power: 25 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,640 x 2,100 mm - Machine height: 2,274 mm - Machine weight: 2,250 kg MACHINE HOURS - Operating hours: 9,070 h ACCESSORIES - Control: BROTHER A00 - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without frequency inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 bar - Oil mist extractor: AAF Astrosta - Electrical transformer - Tool holders: 42 pcs Dcjdpsuhbt Rsfx Afnsd

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm Dodpfx Ashzbipjfnocd IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.