CNC stružnica

INDEX G200 YB Ratioline

Stanje: zelo dobro (rabljeno), Premer obdelovanca: 10 - 250 mm Dolžina navoja: 900 mm Navojni korak: 0,3 - 100 mm Blodpoyb S Risfx Altek Vrtljaji vretena: 72 / 1700 - 2540 min⁻¹ Odrezovanje: 0,03 - 8 mm Maks. vpenjalna dolžina: 1190 mm Največji modul: 10 Obdelovalni vrtljaji: 0,4 - 160 min⁻¹ Skupna potrebna moč: 13 kW Teža stroja približno: 7,4 t Potreben prostor približno: 4,5 x 2,0 x 2,1 m Veliko dodatne opreme: prirobnice, pretvorniki, naprave in valji za obdelavo, notranje brusno vreteno, podporniki ipd.

Stanje: rabljeno, Leto izdelave: 2024, STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. Bjdpsxnlflofx Altjlk - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vrst lukenj. - Vpenjalne roke za nosilec vpenjala, zasnovane za pozicijo vrst lukenj do največ 300 mm. - Idealen tristopenjski sistem orodij. - 1 komplet svedrov za vrtanje lukenj za moznike: - 5 karbidnih svedrov za moznike, Ø 8x77 mm, desno - 4 karbidnih svedrov za moznike, Ø 8x77 mm, levo. Osnovni stroj: STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. - Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vr

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Bsdpfxol Tn Afe Altolk Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 055 - 030.0221, Complete overhaul Year 2003 – Fanuc 16i-T Centre height 175 mm, distance between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland (CH) Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Net machine weight: 5,500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Distance between centres: 650 mm LONGITUDINAL SLIDE (Z AXIS) Max travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X AXIS) Max travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Max. workpiece weight between centres: 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL WHEELHEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Wheelhead drive power: 12.5 kW Rotational speed: 3,200 min⁻¹ Programmable cutting speed up to: 50 m/s B axis travel: -15° to +195° B axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1–1,000 min⁻¹ C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1–1,000 min⁻¹ C-axis indexing accuracy: 0.001° Hydraulic advance with pressure control All technical details are given without guarantee, subject to errors and omissions. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (inspected and/or replaced) Wheelhead Disassembled, cleaned parts, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjustment. Newly painted. Workhead Disassembled, cleaned parts, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock Disassembled, overhauled and inspected. Hydraulics Disassembled, motor inspected, hoses, defective and worn parts replaced. Hydraulic block checked. Blodpfezbaz Aox Altok X-axis Disassembled, worn parts such as O-rings, seals, segments etc. replaced, hydraulic piston overhauled, tables ground. Z-axis Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet Fully inspected, various relays replaced. Paint Colours: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories.

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Blsdpfet Hw S Iex Altek Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Blodpfx Ast Hw Rdoltjk Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, For sale: A Keyence measuring system, model XM-C1000. This measuring system is unique because the measuring points are manually probed by hand. Very user-friendly and intuitive system. Compact and low-maintenance. The control unit and PC (XM-1600) are included in the offer, as well as: - Measuring probe - Exchangeable probe - Alignment station - Various clamping tools - Clamping vise Bodpfx Asrq Ebijltelk - Mouse - Keypad - Operating manual Transport and loading can be organized Europe-wide upon request for an additional charge. Prices are subject to VAT. Viewing by appointment is possible. Please contact us – our team is happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: rabljeno, Leto izdelave: 1992, Measuring range X-axis: 2400 mm Measuring range Y-axis: 1200 mm Bsdpfx Aog Er Nljltslk Measuring range Z-axis: 1500 mm Machine weight approx. 9.00 t

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Bledpfxslz Rvls Altsk Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, izvrtina vretena: 37 mm, premer struženja: 360 mm, širina na sredini: 750 mm, največja hitrost vretena: 3.000 obr/min, Digitalni prikaz Newall, 2 osi Kapaciteta 750x360 mm Bljdsyimzvopfx Altok Vrtina vretena 37 mm Regulator hitrosti vretena, največ 3000 vrt/min