Holzkraft nakup rabljenega (219)

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Kedpfx Ahjcnw T Ie Aenf Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Leto izdelave: 2025, Stanje: novo, Rollers: 4 Roller width: 60 mm Ksdpfeg Ez Sqox Ah Asnf Roller diameter: 120 mm Spring deflection: 20 mm Speeds: 8 Stand: Tripod 1050 mm Motor power: 1 / 0.7 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Knsdpfxobuldyo Ah Ajf Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Dowel hole boring unit: pitch 16, 22, 25, 32 Drilling depth: 180 mm Slot length: 240 mm Height adjustment range: 160 mm Motor power: 2.2 kW Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Ksdsv N Tyqepfx Ah Asnf Weight: 260 kg

Stanje: novo, Leto izdelave: 2025, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional version with quick-release saw blade tensioning system for professional users Article number: 5150063 DESCRIPTION Heavy-duty professional model with high dead weight for maximum smoothness of operation Exceptionally smooth and precise running thanks to the torsion-resistant machine frame Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilting mechanism with handwheel and rack Quick-release saw blade tensioning Precision saw blade guides Fast and precise cut height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shut-off when the door is opened Large cast-iron parallel fence Supplied as standard with mitre gauge Table tilt via rack and handwheel TECHNICAL DATA Dimensions and Weights Product length approx. 1190 mm Product width/depth approx. 820 mm Product height approx. 2063 mm Net weight approx. 377.7 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table(s) Work table length: 830 mm Work table width: 600 mm Work table height: 830 mm Table tilt: 0 – 45° Note on table tilt: For safety reasons, from 20° a holding device/stop must be used to prevent the wood from slipping! Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 4.1 kW Ksdpovk Sfbofx Ah Asnf Cutting Ranges Max. cutting height 90°: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Saw Blade Saw blade speed: 1615 m/min Flywheel diameter: 630 mm Saw blade length: 4600 mm Saw blade guide: precision guidance above and below Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edging: 0.4 - 3 mm Solid wood edging: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Knjdjl D Rx Uepfx Ah Aof Glue application unit: granulate / quick-change glue pot kit End trimming unit: yes Flush end trimming unit: yes Corner copying unit: yes Flush radius milling unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3774 mm Machine width: 1546 mm Machine height: 1337 mm Weight: 842 kg

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Kjdpshk S Stjfx Ah Aonf Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2025, Spindle speed: 4460 rpm Min. workpiece dimensions X: 300 mm Min. workpiece dimensions Y: 90 mm Min. workpiece dimensions Z: 10 mm Max. traverse speed X-axis: 20 m/min Maximum tool diameter: 35 mm Max. workpiece dimensions X: 3000 mm Max. workpiece dimensions Y: 900 mm Max. workpiece dimensions Z: 50 mm Kjdsl D Rw Nepfx Ah Aonf Grooving saw speed: 5700 rpm Dimensions: 3704 mm x 1455 mm x 2209 mm (L x W x H) Suction nozzle nominal diameter (outside): 120 mm Drive motor power: 2.2 kW Weight: 1200 kg

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 141 With standard mobile chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter outside extraction inlet: 140 mm Length approx.: 1062 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Knjdpohk S Swjfx Ah Ajf Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Nominal air flow rate: 1650 m³/h For chips from milling, planing, and sawing processes (not for dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made from high-strength specialty plastic Quick-release fasteners for filter and chip collection bags for simple maintenance Robust, high-quality construction Easy to maneuver thanks to swivel castors Low power consumption Extraction unit complies with dust class L Scope of delivery: Unit body with assembled fan module Filter bag / extraction unit Chip collection bag / extraction unit without extraction hose

Stanje: novo, Leto izdelave: 2025, Working width: 410 mm Cutterhead: Tersa knives Number of knives: 4 Ksdehpl Spopfx Ah Asnf Jointer table length: 2000 mm Fence, angle adjustable: yes, 45° to 90° Maximum planing height: 230 mm Thickness table height adjustment: Handwheel Planing thickness display: mechanical counter Feed speed: 6 / 12 m/min Infeed roller: Steel Outfeed roller: Steel Pressure bar: Yes Table rollers: No Motor power: 5 kW Motor brake: Yes, automatic Extraction port: 120 mm Machine length: 2000 mm Machine width: 750 mm Weight: 430 kg

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Kodpfx Ahjhp Rcyj Aenf Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Usable spindle length 100 mm Spindle shaft diameter 30 mm Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Dolžina sani: 2300 mm Širina reza na vzdolžnem prislonu: 900 mm Širina reza na prečnem prislonu: 2310 mm Globina reza: 100 mm Predrezovalnik: ne Knodpfxoxrbh Dj Ah Aef Nagib žaginega lista: +45° Višinsko nastavljanje žaginega lista: ročni obroč Nastavljanje nagiba žaginega lista: ročni obroč Nastavljanje vzdolžnega prislona: ročno Prikaz kota žaginega lista: skala Prikaz višine reza: - Prikaz vzdolžnega prislona: skala Prikaz prečnega merila: skala Nastavljanje predrezovalnika: ročno Premer žaginega lista: 310 mm Št. vrtljajev: 3500 min⁻¹ Moč motorja: 5 kW Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 3500 mm Širina stroja: 2200 mm Teža: 380 kg

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Oscillating sanding belt for optimal sanding results Article number: 5390020 Brand: Holzkraft Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Kjdpfev Sk Nnjx Ah Aenf Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Miter gauge

Stanje: novo, Leto izdelave: 2025, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Surface table length: 2250 mm Surface fence, angle adjustable: yes Lifting of surface tables: manual Maximum thicknessing height: 250 mm Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Kjdpsxrbgyjfx Ah Aenf Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 695 kg

Stanje: novo, Leto izdelave: 2025, Clean-air dust extractor: RLA 140 For wood dust and chips, designed for commercial use Article number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested to H3; residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation All models equipped with collision protection Application area Designed for commercial use For all woodworking machines with appropriately sized extraction sockets High-quality, well-engineered design Robust and compact housing made of galvanized steel sheet Extraction port easily convertible from left to right, allowing flexible applications Large inspection openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for rapid commissioning All models are mobile For model RLA 210: Optimal chip distribution in the containers due to large filter surface Filter description Ultra-compact design with maximum filter area Filter material made of polyester fleece, aluminum vapor-coated for high durability Knsdpfx Ahsv Sk Tms Asf Filter comes standard in antistatic version, tested and approved according to M-BIA category Fan installed downstream of the filter TECHNICAL DATA Dimensions and weights Length (product) approx. 1241 mm Width/depth (product) approx. 830 mm Height (product) approx. 1750 mm Weight (net) approx. 210 kg Chip collection volume 165 l External diameter extraction port (inlet) 140 mm Extraction port axis to floor 850 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Efficiency class extraction motor IE3 Drive motor power 2.2 kW Filter Filter area 8.5 m² Residual dust content < 0.1 mg/m³ Filter cleaning manual Noise emission Max. sound pressure level 71 dB(A) Airflow Nominal airflow 1108 m³/h Maximum airflow 1750 m³/h SCOPE OF DELIVERY Metal impeller wheel Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with locking brake Manual filter cleaning

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Knjdsdqzh Ropfx Ah Aof Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2025, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) Ksdpsd Hx Hmjfx Ah Aonf With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, 4-knife cutter block for optimal planing results Smooth operation thanks to precision unit and robust cast iron construction Front steel infeed roller with helical serration for optimal feed Satin-finished steel outfeed roller, optionally with rubber roller in outfeed Work table mounted on four large columns for maximum stability under all working conditions Thickness table adjustment via handwheel with numeric height indicator (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator side High-power industrial motor Stable welded steel and grey cast iron construction Equipment Details: Work Table Mounted on four oversized spindles for maximum stability in all working conditions Special lifting device ensures table position remains secure even without locking Tersa Cutter Block No more adjustment or bolting required Knife change in seconds Self-locking Exceptionally quiet Thickness Table Adjustment on S 41 elite s Via handwheel with numeric indicator, precise to 0.1 mm Dimensions and Weights Length: approx. 900 mm Width/Depth: approx. 1070 mm Weight: approx. 361 kg Dust Extraction Connection Extraction port diameter (thicknessing): 120 mm Drive Power Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Space requirement explanation: Dimensions include maximum movement paths or working lengths. Kedpfxsd Hx Hns Ah Aonf Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Working area explanation: Please add these dimensions to the space requirement to determine the recommended clear installation area for the machine. Thicknessing Table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Work height min.: 3 mm Work height max.: 240 mm Min. work length: 180 mm Max. material removal: 5 mm Electrical Data Supply voltage: 400 V Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs. Speed: 5000 rpm Max. planing width: 410 mm Feed Speed: 6/12 m/min

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Ksdpfx Ajhkzttjh Asnf Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Holzkraft panel saw with scoring unit Compact panel saw with tiltable saw blade and high-quality sliding carriage made of anodised aluminium Cutting area of the compact panel saw directly on the rolling table Precision-guided format sliding carriage made of aluminium, anodised as standard Large-area table extension mounted on a telescopic arm, can be shifted longitudinally Standard table extension and table enlargement enable easy handling of larger workpieces Large-dimension cast iron saw assembly, double-mounted to the cast table, ensures maximum stability, precision, smooth operation, and long service life Kjdpfx Ajih Dwvoh Ajnf Large work table made of ground cast iron, making it extremely robust and resistant Smooth operation and precise cuts Aluminium sliding carriage With a proven ball contact system deployed millions of times Dust- and dirt-resistant due to minimal contact points between ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guideways Telescopic fence Extendable aluminium telescopic fence Angle-adjustable With two professional folding stops Ek2a0i2ik Rip fence Supplied with fine adjustment and quick release as standard Scope of delivery: Table extension Table enlargement Anodised aluminium panel sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut length: 1660 mm Max. cutting height at 90° with scorer: 100 mm Max. cutting height at 45° with scorer: 79 mm Max. crosscut width left of saw blade: 1270 mm Cutting width with rip fence: 900 mm Saw blade tilt: 90° - 45° Max. saw blade diameter with scorer: 315 mm Max. saw blade diameter without scorer: 315 mm Scoring blade diameter (option): 80 mm Main saw blade speed: 4000 rpm Scoring blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction outlet diameter: 120 mm Extraction outlet diameter saw guard: 60 mm Weight: 295 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable With spindle moulder reverse operation Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Kedpfxsih Dxls Ah Ajnf Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Knjdpod Hx Hpofx Ah Ajf Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Combination Machine 4-in-1 HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of saw blade: 2,310 mm Rip capacity at parallel fence: 820 mm Saw blade tilt: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./Max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Kjdpfoci Tvhex Ah Aenf Max. cutter diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Kodpfxocnw U Ds Ah Aenf Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Feed unit with consistent feed speed without power loss Metal gearbox with hardened gears Metal cover for the feed rollers Forward and reverse operation High-performance motor Durable polyurethane feed rollers Stand included as standard with extended outreach arm Individually swiveling and adjustable for horizontal and vertical use With counter Model: VSA 48 L Article No.: 5115500 Technical Data: Maximum outreach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Roller travel: 25 mm Knsdpecnxmzsfx Ah Aef Number of speed settings: 8 Feed speeds: 2/ 4/ 5.5/ 6.7/ 11/ 13/ 16.5/ 33 m/min Motor output: 0.75 kW Connection: 400 V / 50 Hz Weight: 65 kg