Tračna žaga - takoj dobavljiva -

Holzkraft HBS 633 S Aktionsset

Stanje: novo, Leto izdelave: 2025, Roller diameter: 600 mm Throat depth: 570 mm Cutting depth: 400 mm Ffsdpfjxrbhqjx Afljt Table tilting: yes, -0 to +45° Table size: 830 x 600 mm Band speed: 1615 m/min Motor power: 3.75 kW / 400V Motor brake: yes / automatic Extraction port: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 380 kg

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Fodovu Hghopfx Aflsft Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Ffedpfx Ajcnw U Doflet Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Fodpjd I A Dhefx Afljft Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina tračnega lista: 4.500 mm, skupna višina: 2.100 mm, premer valja: 600 mm, Cutting height: 300 mm Cutting width: 570 mm Table size: 610 x 700 mm Fedpfx Afjvt Sxgjloft Extraction port: 120 mm Bandsaw guide above and below Fence included Overall machine height: approx. 2100 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.350 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical center with a cast iron structure and roller guideways for the table; travel distances: X 1020 mm, Y 610 mm, Z 610 mm. Table size is 1200×600 mm, with a maximum load capacity of 500 kg. The unit is equipped with a full 4th axis (TJR HR 255N) with tailstock and a T-slotted machined table. The spindle is an ISO-40 (DIN 69871) type, capable of 10,000 rpm (maximum 18 kW), cooled by a dedicated chiller. It features high-pressure through-spindle coolant, a RANDOM-type automatic tool changer with 30 positions and swap arm, RENISHAW TS 27 tool presetting, RENISHAW wireless part probing, and a conveyor chip evacuator. Year of manufacture: June 2017 (installed 2018). It is equipped with a FANUC MILL I CNC with color LCD, Manual Guide i, remote jog handwheel, USB port, RS 232 serial, memory card, and FILTERMIST mist extraction unit. Ffedsxf Nbrjpfx Aflet The machine is in PERFECT condition, with only 2,350 cutting hours. Various tooling options are available as accessories.

Stanje: novo, Saw blade diameter: 210 mm Ffjdpfx Asu Imnisflot Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm Saw blade speed: 4500 rpm Motor power: 1.5 kW Machine weight: approx. 9 kg Dimensions (L x W x H): 340 x 500 x 740 mm Sliding compound mitre saw The machine is equipped with numerous adjustment options and tools to support and secure the workpiece being cut. A line laser indicates where the cut will take place. The blade guard is automatically retracted. Delivery includes: Saw blade (pre-installed) 6 mm Allen key Dust bag 2x side supports

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, General Tool Magazine: 2x chain-type magazines with 32 stations each Rapid Traverse X/Y/Z: 48 m/min Travel Range X/Y/Z: 800/900/620 mm Spindle Technology: Direct drive Speed: 15,000 rpm Tool Holder: HSK-A63 NC Rotary Table Technology: Swivel rotary table with torque drive, manufacturer Kessler Ffodpfeur Ng Uox Aflet A axis: +/- 120° C axis: 360° Clamping Surface: ø800 mm Table Load (max.): 1,000 kg Workpiece Dimensions (max.): ø800 x 500 mm Equipment Position Measuring System: Direct (glass scales) on all axes Chip Management: Chip conveyor Coolant Management: Through-spindle coolant system with filter and high pressure, 18 bar Workpiece Measurement: Probe, Heidenhain TS 740 Tool Measurement: Laser, BLUM Setup Mode: Electronic handwheel Additional Equipment: Spindle chiller

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17002, dolžina rezanja (maks.): 6.000 mm, moč: 45 kW (61,18 KM), Kara F2000, malo rabljena, letnik 2017, moč motorja 45 kW, s podajalnim in odvodnim sistemom, dimenzije računalniško vodene, vklj. s kapno žago, vklj. 6 žaginimi listi, z vgrajenim brusilnikom, vklj. vgrajen izsesovalni sistem. Fedpfx Aerg E Exefleft

Stanje: rabljeno, Leto izdelave: 2003, Drehdurchmesser 190 mm Drehlänge 620 mm Steuerung Fanuc Series 18i-TB Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 13,5 t Raumbedarf ca. 5350X3350x2395 m Ffsdpexiy Ausfx Aflst CNC Dreh- und Fräszentrum NAKAMURA TOME Super NTJ Baujahr 2003 Steuerung Fanuc Series 18i-TB - Hauptspindel muss überholt werden. - Oberer Revolver ist mit einer G42 Turbo- Luftangetriebenen Spindel 60000 U/min und Steuergerät GTR 3 nachgerüstet. Anzahl der Achsen: 9 Anzahl der Revolver: 2 Max. Drehdurchmesser: 190 mm Max. Drehlänge: 620 mm Stangendurchlass: bis zu 65 mm Umlaufdurchmesser über Bett: 190 mm Anzahl: 2 (Haupt- und Gegenspindel) Spindelnase: A2-6 Antriebsleistung: 15 kW Max. Drehzahl: 60000 U/min X-Achse: 345 mm Y-Achse: +/- 45 mm Z-Achse: 1240 mm B-Achse: +/- 91° oben voll Servogesteuert 0,001° Stangendurchlass: D 65 mm - 12-fach Revolver für angetriebene Werkzeuge - 24-fach Revolver für Drehwerkzeuge (Doppelhaltertechnik) - mit viel Zubehören - 2 x HB-Futter Hainbuch