Holzkraft nakup rabljenega (165)

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. Tedevwfqwspfx Anpsd TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Tsdshkzttjpfx Anped Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of suction connection (inlet): 200 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Max. sound pressure level: 72 dB(A) Tjdpfx Ajhk Dfrjnpod Air Volume Nominal air flow: 2262 m³/h Dust tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirement Maximum performance in this class Very quiet All models equipped with collision protector Applications Designed for commercial use Suitable for all woodworking machines with corresponding suction connection diameters High-Quality, Thoughtful Construction -Robust and compact housing made of galvanized steel sheet -Suction connection can be easily converted from left to right for flexible use -Large access openings for maintenance -Large, mobile chip containers with clamping bracket and chip collection bag -Dust extractor comes fully assembled for immediate operation -All models are mobile -RLA 210 model: Optimal chip distribution in the containers thanks to a large filter area Filter Description -Ultra-compact with maximum filter area -Filter material made of polyester fleece, aluminum-coated, washable and therefore highly durable -Filter standard antistatic, certified and approved according to category M-BIA -Filter resistance monitoring via differential pressure switch, adjustable with warning lamp on control panel -Fan mounted downstream of filter Equipment Details With innovative locking device for secure container positioning Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination Machine 4-in-1 HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of saw blade: 2,310 mm Rip capacity at parallel fence: 820 mm Saw blade tilt: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./Max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Tedpfxeci Tvho Anpsd Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. cutter diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Tedpfx Ashp Rc Ijnpsd Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Tsdpjhkz E Tsfx Anped Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Table spindle moulder HOLZKRAFT t 45c LL With table extension on both right and left sides, as well as extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, Max. spindle projection above table: 130 mm, Usable spindle length: 100 mm, Max. retractable cutter diameter: 180 mm, Tjdpfxou U Rfps Anped Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, Extraction port diameter: 2 x 120 mm - Special price - - New display machine -

Stanje: novo, NEW Precision Wood Bandsaws for the Ambitious Craftsman Exceptionally smooth and precise operation thanks to a torsion-resistant machine frame and a robust steel base Cast iron saw table with precisely ground and polished surface Comfortable laser system for cut line marking Quick-release blade tensioning via eccentric lever at the rear of the machine Standard with two speeds Todpfxsvwgbde Anped Precise 3-roller blade guides, standard above and below from model HBS 351 Fast cutting height adjustment via handwheel and rack with millimeter scale Smooth-running aluminum parallel fence with quick eccentric clamp and magnifier Standard miter gauge, adjustable ±60° Safety switch for automatic shutoff when the door is opened Equipment Details Precision Guidance HBS 351 with 3-roller blade guides above and below With guide rollers Easy adjustment Practically maintenance-free Quick-Release System Eccentric quick-release lever Basic tension setting remains unchanged Integrated blade tension indicator Flywheels Flywheels with special coating (HBS 351) Tension setting made via the top-mounted handwheel Saw Table The cast iron saw table is mounted on a tilting trunnion Table tilt can be easily set from -10° to +45° Blade Tension Display Blade tension display for various blade widths Externally visible through a window integrated into the door Precision Guidance From model HBS 431 with precision blade guidance with guide rollers, fine adjustment above and below Two speeds selectable by V-belt adjustment Balanced cast iron flywheels ensure smooth operation Aluminum Parallel Fence With eccentric quick-clamp, exceptionally smooth and precise adjustment Easily readable millimeter scale and integrated magnifier Saw Table Twin Trunnion Mount Table tilt from -10° to +45° via precise and smooth rack and pinion with knob For safety reasons, a retainer/stop must be installed from 20° onwards to prevent wood from slipping! Technical Data: Dimensions and Weights Length (product) approx.: 820 mm | Height (product) approx.: 1852 mm Width/Depth (product) approx.: 730 mm Weight (net) approx.: 130 kg Dust Extraction Connection Extraction port diameter: 2 x 120 mm Work Table(s) Work table length: 610 mm Work table tilt: -10° to +45° Work table width: 431 mm Note on Work Table Tilt For safety reasons, a retainer/stop must be installed from 20° upwards to prevent wood from slipping! Work table height: 950 mm Electrical Data Supply voltage: 230 V Mains frequency: 50 Hz Phase(s): 1Ph Output power: 1.5 kW Current type: AC Cutting Area Max. cutting height at 90°: 270 mm Max. cutting width without fence: 410 mm Max. cutting width with fence: 370 mm Saw Blade Blade speed(s): 900 / 450 m/min Blade guide: 3-roller precision guide, above and below Blade length: 3345 mm Scope of Delivery Miter gauge ±60° Laser unit for cut line marking 1 x wood saw blade, 3345 x 6 x 0.65 mm

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Todpfx Anshp Rcrepsd Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Tjdpfx Anehp Rcyepsd Usable spindle length 100 mm Spindle shaft diameter 30 mm Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Stanje: novo, Leto izdelave: 2025, Woodworking machinesSliding Table Spindle Moulder Minimax twf55 es Item number: 5502261 Robust steel and cast iron construction Anodised aluminium format sliding table Large-scale spindle unit made of cast iron, tiltable backwards up to -45° Tedpei Dphtsfx Anped Four spindle speeds from 3500 to 10000 rpm Clockwise and counterclockwise rotation standard Height and tilt display precise to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for permanent precision Powerful 5.0 kW industrial motor Curved section hood included Made in Italy Dimensions and Weights Length (Product) approx. 1200 mm Width/Depth (Product) approx. 2000 mm Weight (Net) approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Setup Information Required Space Length: 2800 mm Required Space Width/Depth: 2910 mm Space Requirement Note: Dimensions account for maximum travel paths or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Working area note: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Motor output: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED at machine front Spindle shaft diameter: 30 mm Max. Tool Diameter Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tool diameter for profile milling: 240 mm Max. tool diameter for tenoning: 320 mm EQUIPMENT Features Aluminium sliding table: ✔ Spindle fence: Heavy-duty professional design with hold-down, safety cover and aluminium spindle fence jaws Telescopic mitre fence: with two flip stops Extension table: ✔ Curved section safety hood: ✔ Eccentric clamp: ✔ Handle on sliding table: ✔ Manual spindle height adjustment Manual spindle tilt adjustment Control: Manual height and tilt adjustment of the spindle unit Control elements location: On machine body Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Odsesovanje Holzkraft ASA1103, dobro ohranjeno, serijska oprema, 1,5 kW, 50 kg Todsx H Ugljpfx Anpjd Pridržujemo si pravico do sprememb cen, napake pri tisku in postavitvi so možne.

Stanje: novo, Leto izdelave: 2026, Maximum specification for professional users. Multi-function combination machine with TERSA cutterblock, mitre cutting unit, and tilting spindle moulder. Ø 350 mm main saw blade with 118 mm maximum cutting height, even with scoring blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside. High-precision sliding table made of anodised aluminium on hardened and polished steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to 3300 mm. Saw aggregate tilts from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the fence. Four spindle speeds. Spindle moulder with reversible rotation direction. Quick conversion to thicknesser thanks to parallely opening surface tables. 2-speed feed on thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Includes separate rip fence and separate jointer fence. Equipped with lockable main switch. Equipment details: Crosscut fence Immediate control Outrigger table Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium Guides made of hardened and ground F550S steel, 15% harder than conventional steel Guides are riveted, not glued Smooth-running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guideways Cast iron dual trunnion saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to saw blade, supported on both sides Height and tilt adjustable up to 45° Scoring unit with separate 0.55 kW scoring motor as standard Dual trunnion spindle moulder unit Large dimensioned, tilting cast iron dual trunnion spindle moulder unit Spindle fence Heavy-duty professional version The high-quality spindle fence made of cast iron is supplied with fine adjustment as standard Tedpfxjcnxa Se Anped 3-position for quick recall of settings Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Planer section Helical-toothed steel infeed rollers ensure consistent wood feed Massive anti-kickback devices prevent workpiece kickback 4-knife Tersa cutterblock for optimal planing results Table lips ensure quieter operation Tersa planer cutterblock No more setting or screwing Knife change in seconds Self-locking Extremely quiet operation Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, guaranteeing maximum stability under all working conditions Special lifting device ensures table position is maintained precisely, even without locking Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Reversible aluminium fence ruler No gap in measurement, guide bars are overlapping Separate surface fence Large professional design (1800 x 150 mm) Tiltable 0-45° With quick adjustment Stable round bar guide made of ground steel Simultaneous opening Art. no.: 5500557

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Tsdpfx Anehp Rdljped Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Tsdpfx Aecnwydenped Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 2433345525, Funkcionalnost: popolnoma funkcionalen, Extraction nozzle 125 mm Nominal volume flow 884 m³/h Motor power 2.2 kW 16A Mobile Weight approx. 194 kg Dimensions (LxWxH): 1000 x 840 x 1650 mm Container size 730 x 660 mm Tedpfxoiw D U No Anpjd Manual shaker

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Tedpfxecnw T Ij Anpod Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Todpfx Asff Hdpjnpod Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Tedpfx Aneff Hdmjpjd Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Tsdpovwf Ucofx Anpjd Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, Edge sanding machine HOLZKRAFT KSO 200 F - Demonstration machine - Relief rollers on the fence guides, with tiltable sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubber-coated sanding roller Tedeu R S Erspfx Anpod ----- Technical Data ----- Sanding belt dimensions: 3,000 x 200 mm, Worktable dimensions: 960 x 350 mm, Worktable height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Extraction port diameter: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new demonstration machine -

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Tjdpfx Anscnxayjped Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motor-driven height adjustment of the working units with digital display Units can be operated individually Highly durable rubberized conveyor belt Infinitely variable feed speed Constant infeed height Models STR L with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for delicate materials. Unit for saw-cut finish optionally available Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Rotation: 1500 rpm Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Total connected load: 6.25 kW Supply voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Tsdpfx Aoff Hdisnpsd Max. weight: 100 kg

Stanje: novo, - New - with tiltable sanding unit and oscillating sanding belt, F-version for veneer sanding Description: - Sanding unit tiltable via lever up to 45° - Machine frame made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate geared motor for improved sanding results - Oscillation can be switched on/off as needed - Sanding shoe with graphite coating for increased belt service life - Height-adjustable sanding table to utilize the full width of the sanding belt - Height-adjustable auxiliary table with extraction for sanding radii - Spring-loaded belt tension automatically compensates for differences in belt length - With dual extraction ports - Extendable roller table extension - With rubberized sanding roller - Veneer edge sanding device with contact shoe featuring fine adjustment, relieving rollers, and stop rulers - With grooved infeed ruler for veneer overhangs - Quick changeover from veneer edge to solid wood sanding possible Technical Data: Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Extraction Connection Extraction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Longitudinal table height adjustment 230 mm Cross table minimum height 720 mm Electrical Data Connection voltage 400 V Network frequency 50 Hz Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Tsdpfx Aovwgbwonpjd Item no. 5363001

Stanje: novo, Leto izdelave: 2026, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Todpfjcnxa Nox Anped Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish