Kombinirani skobeljnik z debelino

Holzkraft minimax fs 52es TERSA Digital - sofort

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 6.000 W, potovalna razdalja osi X: 3.030 mm, pomik osi Y: 1.520 mm, pomik po osi Z: 310 mm, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, skupna višina: 2.050 mm, Oprema: CE označba, centralizirani mazalni sistem, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, VS-3015CE 6KW vlakenski laserski stroj za rezanje pločevine Delovno območje (mm): 3000×1500 Pomik osi X (mm): 1520 Pomik osi Y (mm): 3030 Pomik osi Z (mm): 310 Natančnost pozicioniranja osi X/Y: ≤0,03 mm/m Ponavljajoča natančnost pozicioniranja osi X/Y: ≤±0,02 mm Največja kombinirana hitrost pozicioniranja: 150 m/min Največje pospeševanje: 2G Hedpfov Ngraex Ag Ajnu Dvostranska upravljalna plošča, prilagodljivo nameščanje pod različnimi koti, enostavna demontaža in možnost namestitve v standardni 40HQ kontejner. Industrijski klimatski sistem s konstantno temperaturo in vlago za stabilno delovanje. Avtomatski sistem za mazanje in vbrizgavanje olja, pametni nadzor tlaka zraka ter protivtrkalna zaščita za inteligentno varnost.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Hnjdpfxji Dfidj Ag Aju The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2023 Approximate length: 2300 mm Approximate width/depth: 1100 mm Approximate weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Planer fence swivel range: 90 - 45° Extraction port diameter (thicknessing): 120 mm Main motor: 7 kW Required length (installation space): 2300 mm Required width/depth (installation space): 1610 mm Note on required space: The dimensions account for maximum travel paths or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Hedpextgz Eofx Ag Aonu Note on working area: Please add the specified dimensions to the installation space to calculate the recommended free area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: short-term Location: Solingen

Stanje: rabljeno, Leto izdelave: 1988, 105 Twinband Linear PM für Rundholz bis zu 300 mm Durchmesser und 4 m Länge, ein komplettes Rundholz-Sägesystem vom Stamm bis zum Endprodukt. Die Anlage verarbeitet Rundholz effizient – von der Auftrennung über das Zurücksägen bis hin zum fertigen Schnitt – für hohe Produktionsleistung bei minimalem Verschnitt. Hnodjm Rhfdjpfx Ag Asu

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm Hnodpehfufgefx Ag Aju -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Hedpfx Aepgkmwsg Ajnu Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Hsdpfx Asff Hdmeg Asnu Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, CORMAK FM300 je visoko zmogljiv odsesovalnik lesnih sekancev, zasnovan za intenzivno uporabo v mizarjih, pohištvenih in proizvodnih obratih. Zahvaljujoč motorju z močjo 1,5 kW, dinamično uravnoteženemu rotorju in robustni jekleni konstrukciji, naprava zagotavlja zanesljivo odstranjevanje lesnih sekancev, opilkov in prahu pri pretoku do 2530 m³/h. To je rešitev, namenjena profesionalcem, ki pričakujejo učinkovitost, vzdržljivost in stabilnost delovanja. Glavne prednosti stroja: * Visoka zmogljivost odsesavanja – 2530 m³/h, omogoča sočasno obdelavo več delovnih mest. * Motor z močjo 1,5 kW (400 V, 3 faze) – stalna moč in odpornost na preobremenitev v neprekinjenem načinu delovanja. * Kovinski, uravnoteženi rotor – tiho, brez vibracij delovanje in povečana življenjska doba komponent. * Velika prostornina vreč – 150 litrov – podaljšano trajanje delovanja brez potrebe po praznjenju. * Priključek v obliki črke Y: 2 × Ø100 mm ali 1 × Ø130 mm – prilagodljiva povezava z različnimi konfiguracijami strojev. * Stabilna, mobilna podlaga na štirih kolesih – olajša premikanje odsesovalnika med delovnimi mesti. * Hitra namestitev platnenih vreč – skrajša čas obdelave in poveča ergonomijo pri delu. Konstrukcija in tehnologija: Konstrukcija odsesovalnika lesnih sekancev CORMAK FM300 temelji na jeklenem, varjenem nosilnem okvirju s kolesi, kar zagotavlja visoko togost in mobilnost naprave. Osrednji element sistema je kovinski ventilator za lesne sekance z dinamično uravnoteženim rotorjem, ki zagotavlja stabilen podtlak brez hrupa in vibracij. Priključek v obliki črke Y omogoča hitro preklapljanje med konfiguracijama z eno in dvema cevovodoma, zaradi česar je ta model izjemno vsestranski. Natančnost in učinkovitost: Zaradi hitrosti vrtenja motorja 2850 vrt/min in velikega pretoka zraka odsesovalnik lesnih sekancev CORMAK FM300 učinkovito obvladuje tako lahke sekance kot tudi težje frakcije prahu, ki nastajajo pri žaganju, rezkanju ali brušenju. Velika prostornina vreč zmanjšuje čas izpada, konstrukcija ventilatorja pa preprečuje zamaševanje kanalov in zagotavlja neprekinjeno delovanje v težkih pogojih. Uporaba: * Profesionalne mizarne in pohištvene delavnice – odsesovalnik za sekance od žag, krožnih žag, rejk, rezkarjev. * Industrijski obrati – osrednji sesalnik za lesne sekance za delo z več stroji hkrati. * Šole in tehnične delavnice – odpornost na intenzivno, vsakodnevno uporabo. * Mizarske in obrtniške storitve – mobilna rešitev za delavnice z raznolikim proizvodnim profilom. Standardna oprema: * Kovinski priključek v obliki črke Y – 2 × Ø100 mm ali 1 × Ø130 mm * Jeklena, mobilna podlaga s štirimi kolesi * Dve platneni vreči (filtrirna in zbiralna) Dodatna oprema: * Sesalna cev Ø100 mm poljubne dolžine * Cinkane objemke * Univerzalne, plastične vrečke za hitro zamenjavo Hnsdpfx Aovu Atweg Aou Tehnični podatki: * Pretok odsesavanja: 2530 m³/h * Podtlak: 1800 Pa * Hrup: 70 dB * Hitrost motorja: 2850 vrt/min * Moč motorja: 1,5 kW * Napajanje: 3 faze, 400 V * Prostornina vreč: 150 litrov * Število vreč: 2 (filtrirna + zbiralna) * Premer sesalne cevi: 1 × Ø130 mm ali 2 × Ø100 mm * Dimenzije (D × Š × V): 940 × 510 × 1960 mm * Teža: 56 kg * Navodila za uporabo (DTR): da * Izjava o skladnosti CE: da

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, COMEVA MB 500 Planer & Thicknesser Working width: 510 mm 4-knife cutterblock Traditional knives Worktable length: 2630 mm Hjdpfx Ageiwa Spe Asnu Tilting fence adjustable up to 45° Motor power: 4 kW Outfeed guards CE certificate

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction Hjdpfxehp Rcro Ag Ajnu With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support