Holzher Triathlon nakup rabljenega (159)

Stanje: rabljeno, Holz Her STREAMER 1054 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with rotary switch for unit adjustment Pre-milling unit for jointing before gluing section Fully automatic edge magazine for both rolls and strip material GLU-JET cartridge glue application station with PU gluing Adhesive application via nozzle technology Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, first roller motorized Pneumatic end trimming unit for rolls and strips up to 6 mm edge thickness Isdpfxexu E Nwe Ah Aetr With pneumatic adjustment from 0-10° angle for trimming saws Pneumatic milling unit for flush milling (6 mm), radius milling, bevel milling (15°), pneumatically controlled from the operator panel Scraper unit for bevels and radii with 2 scraper holders, pneumatically engageable/disengageable Surface scraper unit for finishing Spraying system - PU The machine is WORKSHOP-REFURBISHED and in TOP CONDITION

Stanje: rabljeno, Leto izdelave: 2004, Dolžina reza 5300 mm, višina reza 2200 mm, motor 4,0 kW, globina reza 60 mm, žagin list 250 mm D. Lokacija skladišča: Nattheim. Iedpfx Aexr A Nvsh Astr

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: - Base machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - Individually selectable - T-shaped arrangement - Max. drilling diameter 35 mm (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating right and left - n = 4725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swiveling - n = 5300 rpm Isdpex Enpqefx Ah Astr - Tool holder: A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y direction - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Handheld control device - PC control with TwinCAM WOP system - Siemens control Availability: short-term Stock location: Poland

Stanje: dober (rabljeno), Leto izdelave: 2006, Debelina robnega traku (letvice): 0,4 - 8 mm Debelina robnega traku (rola): 0,4 - 3 mm Višina roba: 55 mm Debelina plošče: 4 - 45 mm Iodsx Ezgcspfx Ah Ajtr Pomik: 12 m/min Na zalogi, brezplačno natovarjanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen,

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.920 mm, višina obdelovanca (maks.): 60 mm, trajanje garancije: 3 meseci, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Program changes and tool adjustments are easily performed via the 18.5" touchscreen control panel. The GlueJet adhesive system features a short heat-up time of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. PUR adhesive changeover and system cleaning are extremely simple and can be completed within minutes. Axis adjustment is carried out by high-precision, repeatable servo motors. Special configuration for film-protected materials such as high-gloss and super-matte surfaces! One of the machine’s absolute highlights is the multifunction package, which proves especially valuable for workshops processing a wide variety of edge types. The DIA tooling is multi-stage and allows on-the-fly switching between radii and bevels—covering longitudinal milling, corner copying, and profile scraping. The extendable workpiece support and extended infeed zone facilitate handling of large panels, and a guiding system helps feed small workpieces into the machine. Edge thickness (coil): 0.4 – 3 mm (material dependent) Edge thickness (strip): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet for both EVA and PUR adhesives, minimal effort required. Processes all common edge types including high-gloss & super matte, as well as solid wood edging up to 15 mm. Iodpfx Aox Emf Dsh Aotr iTronic – pressure and adhesive quantity control system Pre-configured for integration with a RETURN system Motor-driven pressure bridge with top belt drive Multifunction units for rapid setup of radius, flush, and bevel trimming Vertical and horizontal spraying units and much more.

Stanje: rabljeno, Leto izdelave: 2014, Smer pločevine: z desne strani upravljavca Maks. debelina robnega traku: 3 mm Min. debelina obdelovanca: 8 mm Isdsw R Hiropfx Ah Astr Maks. debelina obdelovanca: 60 mm Min. širina obdelovanca: 65 mm Min. dolžina obdelovanca: 160 mm Podajalna hitrost: 10 m/min Lepljiva enota: da, z 2 rezkalnima enotama Lepljivo orodje: diamantni rezkar Premer: 70 mm Višina: 48 mm Prilagoditev vodila: ročno Obrezovalne škarje do: 3 mm Posamezno podajanje roba: možno Lepljenje: GlueJet PU-lepljenje: možno Obrezovalna žaga: da Kombinirana enota ravno/faza/radius: pnevmatsko nastavljiva Zaoblitvena enota: pnevmatsko nastavljiva Profilni rezkalnik: da Ravni rezkalnik: da Prikaz agregatov: na zaslonu Vrsta krmiljenja: preko končnih stikal Upravljanje: upravljalna plošča z gumbi Podvozje: ne Izvlečna valjčna podpora: da Zaščitni pokrov: da Delovna višina oz. višina podajalne mize: 874 mm Teža cca: 1400 kg Premer odsesavanja: 160 mm Skladišče:

Stanje: rabljeno, Leto izdelave: 1999, Širina reza: 5300 mm Višina reza: 1910 mm Itjdpfx Ajxzu Eueh Aor Skladiščna lokacija: Nattheim

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and technical data: Iodjwka Iiopfx Ah Aotr The machine has been completely overhauled: - New Glue Jet 301 adhesive system (upper part 1 mm) - All units checked - All milling heads resharpened - All blades replaced Feed speed: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Electricals for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control unit with 15" touchscreen ECO MODE energy saving mode Infeed fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing cutters for panel edge jointing - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeding system 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile scraper unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs required) Surface scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Kompaktna izvedba – debelina robnega traku 0,4 – 8 mm SPS zaslonsko krmiljenje Edge-Control PPC 221 s barvnim zaslonom Predrezalna enota pred lepilno enoto Popolnoma avtomatski magazin za robni material za kolutni in trakasti material Lepilna postaja GLU JET s kartušami + PU lepljenjem – multisistem+ Nanos lepila z uporabo šobne tehnologije Itjdpfx Ahexrr Uze Asr Višina obdelovanca: 6–65 mm Avtomatska nastavitev višine lepila Stiskalna enota 1912-3 pnevmatska Odrezovalna enota 1918 pnevmatska za kolutni in trakasti material do 8 mm debeline robu S pnevmatskim nastavljanjem naklona od 0–10° za odrezne žage Rezkalna enota za poravnavanje do 8 mm, radijsko rezkanje – posnetje faze 15° preko upravljalne plošče Oblikovna rezkalna enota 1832 pnevmatska: zaobljanje robov do debeline 3 mm v prehodu Strgalo za posnetje faz in radije Ravnina strgala – končna obdelava Škropilna enota – PU Kompletna DIA-oprema orodij vključena Stroj je DELAVNIŠKO OBNOVLJEN, v ODLIČNEM STANJU Na voljo iz zaloge Lieboch

Stanje: rabljeno, Leto izdelave: 1998, skupna dolžina: 5.200 mm, skupna višina: 1.740 mm, skupna širina: 1.500 mm, Weight: 970 kg - Year of manufacture: 1998 - Documentation available: No - CE certificate present: No - Number of units: 9 - 1st unit type: Glue application unit - Tools included: Yes - 2nd unit type: Pressure rollers - 3rd unit type: End trimming unit - Tools included: Yes - 4th unit type: Rough miller unit Ijdex H Rivepfx Ah Astr - Tools included: Yes - 5th unit type: Rough miller unit - Tools included: Yes - 6th unit type: Radius scraper unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Flat scraper unit - Tools included: Yes - 9th unit type: Brushing unit - Tools included: Yes - Voltage [V]: 400 - Transport dimensions: 5200mm x 1500mm x 1740mm (L x W x H) - Transport weight [kg]: 970kg - Number of transport packages: 1 Financial information VAT: The quoted price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: nepreverjeno, širina obdelovanca (maks.): 920 mm, vrtljajska hitrost (min.): 1.000 obr/min, največja hitrost vrtenja: 18.000 obr/min, število mest v zalogovniku orodij: 6, premer orodja: 80 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Holz-Her EVOLUTION 7405 4mat (stroj stranke / posredovana ponudba) - Rezkalno vreteno 7,5 kW - Programska oprema Campus NC-Hops V6 - Ročni skener - Vakuumska črpalka 8 m³/h - Merjenje dolžine obdelovanca (laser) TEHNIČNI PODATKI Velikost obdelovanca: X = 200 - 3200 mm (daljši z dodatno podporo) Y = 70 - 920 mm Debelina materiala: Z = 8 do 70 mm Maks. pomik v X-smeri brez ponovnega vpenjanja: X = 1500 mm Z-višina: Z = 240 mm Maksimalna programabilna hitrost: Vektorska hitrost: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Stroj lahko po potrebi obnovimo, demontiramo, montiramo in vključimo mi (proizvajalec). Isdpfx Ajx I A Elsh Aotr Brez garancije oziroma jamstva s strani proizvajalca, ker gre za posredovano ponudbo!

Stanje: dober (rabljeno), Chip extraction unit, filter extraction, bag filter - Drive power: 0.96 kW Iedpfx Ahjb A E Uhs Astr - Speed: 2800 rpm - Connection: Ø 50 mm - Voltage: 380 V - Dimensions: 780/470/H340 mm - Weight: 135 kg

Stanje: rabljeno, Leto izdelave: 1994, Debelina robnega traku: 0,3 - 20 mm, maksimalna višina traku: 66 mm, minimalna dolžina traku: 200 mm. Minimalna širina obdelovanca: 60 mm, minimalna dolžina obdelovanca: 140 mm, debelina obdelovanca: min. 6 mm, maks. 60 mm. Podajanje 8 ali 16 m/min. Lepljenje z Ultra - Granupress. Odrezovanje: 2 žagi, nagibne 0 - 15°. Rezkanje, radij / na ravno, kopiranje kotov, strgalo, pnevmatsko poliranje. Lokacija skladišča: Nattheim. Itsdevvkdtopfx Ah Ajr

Stanje: rabljeno, Leto izdelave: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical specifications: - with new glue application system - Infeed fence adjustable manually - Milling unit 1961 - Edge feeding unit 1903 - Glue application station 1906 with sensor-controlled nozzle - Pressure unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M for radius, bevel, flush trimming - Complete air nozzle assembly - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Complete safety hoods - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edgeband thickness, depending on equipment: 0.4–5 mm - Max. edgeband height: 55 mm - Edgeband strip length: min. 350 mm - Edgeband overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing/milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Jointing/milling unit: 1490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Jointing/milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Iedpowka H Ssfx Ah Astr Location: Röllbach

Stanje: rabljeno, Holz Her STREAMER 1057 FÜ + PU Tłoušťka hrany 0,4 - 6 mm Moderní ovládání s voličem pro nastavení agregátů Předfrézovací agregát pro přípravu materiálu před nanesením lepidla Plně automatický zásobník hran pro rolový i páskový materiál Stanice pro nanášení lepidla GLU-JET na kartuše + PU lepení Nanášení lepidla pomocí tryskové technologie Výška obrobku 6-60 mm Automatické nastavení výšky lepidla Vysoce kvalitní tříválcová přítlačná jednotka, 1. válec poháněný motorem Pneumatická ořezávací jednotka pro rolový i páskový materiál do tloušťky hrany 6 mm S pneumatickým nastavením sklonu ořezávacích pil 0-10° Frézovací agregát pro zarovnávací frézování do 6 mm, frézování rádiusů, zkosení až do 15° Agregát pro kopírování rohů – tloušťka hrany 3 mm Jednotka stíracích nožů na zkosení a rádiusy se 2 držáky nožů Jednotka plochých stíracích nožů – povrchová úprava Stříkací zařízení – PU Stroj obsahuje veškeré pracovní nástroje Stroj je dílensky otestován a ve špičkovém stavu Itsdpfx Ajxqa Iyjh Asr

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 11.517 h, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines solely on the basis of photographs and are offering them for sale using only the information provided in the listing. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Furthermore, these machines are often not yet in stock and have not been inspected by us. These machines are offered at attractive prices, meaning the prices are lower than usual, but the risk is entirely assumed by the buyer. Please carefully check the information in the listing before making a purchase. Feel free to contact us if you have any questions! - Year of manufacture: 2014 - Documentation available: No - CE Certificate available: No - Serial number: 070614/B/1-407 - Operating hours: 11,517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - Number of controlled axes [pcs.]: 4 - C-axis available: Yes - Working area X [mm]: 7,220 - Working area Y [mm]: 1,580 - Z-axis working area [mm]: 180 Financial information VAT: The stated price is exclusive of VAT Iedex E Uk Uopfx Ah Aetr VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Oblačilni stroj HOLZHER, tip 1310, opremljen z: postajo za lepilo v kartušah, poravnalnim odrezovanjem, dvema multifreznim agregatoma, profilnim strgalom, polirnim agregatom, dobro stanje. Itjdpsx H Sutefx Ah Asr

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Iodjvvkfdepfx Ah Astr Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Leto izdelave: 2004, Rabljeni stroj Leto izdelave: 2004 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Pomiki: - X-os: 2.685 mm Itodpfx Ajx Enqbsh Asr - Y-os: 1.095 mm - Z-os: 140 mm Rezkalna enota: - 6 kW, vodno hlajenje - Nosilec orodja HSK 63 F - Število vrtljajev 1.000 - 18.000 min⁻¹ - Menjalec orodij: 6-kratni, stranski Vrtalna glava: - 9 vertikalnih vrtalnih vreten v rastru 32 mm - Horizontalna vrtalna vretena: 1+1 - Vertikalna vrtalna vretena: 1+1 Rezkalna žaga: v smeri X Krmiljenje: Twin CAM 32 Vakuumska črpalka: 100 m³/h Vključno z vakuumskimi priseski Mere: 5.200 x 2.843 x 1.855 mm Teža: cca 3.500 kg Razpoložljivost: po dogovoru Lokacija skladišča: Spodnja Saška

Stanje: rabljeno, Lokacija skladišča: Nattheim Iodpfxjvvkrdo Ah Aetr

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (received 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Data: Edging thickness (coil material): 0.4 - 3 mm (material dependent) Edging thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed rate: 10 m/min Features: Motorized pressure beam adjustment Extendable workpiece support XL, spacing 600 mm Ijdpfx Ahexymd To Astr 3-colour LED infeed light Motorized infeed fence adjustment Long infeed fence 1252 mm I-Tronic package Edge Control PPC 322 W control IntelliSet: intelligent tool correction f.a.s.t = fast setting technology ECO-Mode energy-saving mode Prepared for RETURN connection (third-party device) Guide rail BS 501; precise right-angled feed of workpieces for end-edge banding of narrow panels - Workpiece thickness: min. 10 mm - Workpiece thickness: max. 60 mm - Workpiece length: approx. 140 - 450 mm Joinery-milling unit FG201 with 2 milling heads, 64 mm high Edging feed MG 301 Adhesive application system GluJet GJ 725 NC PUR PRO - automatic glue height adjustment via dosing sleeve and sensor nozzle to compensate for panel tolerances - NC axis for height adjustment - swivels 90° for easy cleaning of glue jet nozzle - includes vacuum pump for professional processing of PUR adhesives. The vacuum pump extracts - the reactive partner (water molecules) from the PUR so the PUR glue remains in the system without curing. - The vacuum pump operates independently from the machine's power supply and automatically compensates any vacuum loss. - Total control of PUR! Pressure unit DW 301 with motorized NC axis; first roller driven with pneumatic immersion control, 2 conical post-pressure rollers Spray unit GM301 after pressure unit with lubricant for high-gloss edges Pneumatic end trimming unit KA 501 (60 mm) Extraction hoods for end trimming unit Multi-function milling unit FR301 MOT6 Shelf panel program Profile trimming unit FF 301 MOT1 Scraping unit ZK301 MOT4 including high-gloss package Flat scraper FK702 Complete separation and cleaning agent spraying device Spray unit GM 301 after pressure unit (high-gloss edges) Buffing unit SW 501 Piping above the machine is not included in the scope of delivery Availability: short-term Location: Hochheim

Stanje: rabljeno, Leto izdelave: 2011, Teža: ca. 4500 kg Itodpfx Ahovvi R Eo Asr Skladišče: Nattheim

Stanje: rabljeno, Leto izdelave: 2006, EVA lepljenje z 2 pritisnima valjema, kap postaja, predrezkar in zaoblitveni rezkar, strgalo za površine, pogonska naprava. Lokacija skladišča: Nattheim Iodpfx Ajvvkg Ish Astr

Stanje: rabljeno, Leto izdelave: 2009, automatic central lubrication milling unit 7833, 2-stage, 11 kW power, 1,000 - 24,000 rpm; 1 double drilling spindle in X direction; 1 integrated saw unit for sawing/grooving in X direction, traversing; tool changer 7892, 16-position linear pick-up changer, permanently installed on the right side of the machine; laser pointer set: 2 laser pointers for positioning the vacuum cups or referencing the workpiece contour; automatic console and vacuum cup positioning; 6 consoles incl. 3 vacuum cup mounts per console, incl. 1 vacuum cup 80x80 mm per mount; incl. 4 loading aids; additional processing zones at the front for 6 consoles; base unit pneumatic system for frame clamping system 7974 (6 consoles); 2D barcode scanner; video camera in the machining head; vacuum pump 140 m³/h; Vario tool change unit package consisting of: vector axis 7899 (C-axis) fully interpolating, 0-360° infinitely rotatable, incl. pneumatic tool changer 7890, single-position magazine, pick-up system, fixed installation in front of the machine frame on the left; tool changer 7894, 6-position pick-up magazine especially for Vario tool change tool holders, fixed installation in the left side of the machine frame, can be equipped with collet chucks Vario Grip KSJ F 40, 3 pcs. tool holders Vario Grip KSJ F 40 (for collets 2-20 mm ER32), 1 pc. saw blade adapter, 3 pcs. collets per customer selection, 1 pc. carbide circular saw blade max. 220 mm diameter. Itsdjvvi Spspfx Ah Aer Location: Nattheim