Holzher Nagler nakup rabljenega (159)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Iiodjbahd Eepfx Ah Aok Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Iiedpfsx It Hmsx Ah Aok Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.300 mm, največja širina rezanja: 4.250 mm, Prisilna prečna žaga Holz-Her ZENTREX 6215 Power, s povezavo na skladišče Dolžina reza 4300 mm Širina reza 4250 mm Izstop žaginega lista 115 mm Glavni motor 15 kW, predrezilo 2,2 kW Ijdpfjx Id U Ijx Ah Asik Premične podporne mize Odsesovalni paket Clean Protection & Dust Control Laserski indikator – prepoznavanje širine traku Inteligentne vpenjalne klešče za obdelovanec Preklopni pritisk vpenjalnih klešč Sistem zapiranja reže reza Ročni upravljalnik Tiskalnik etiket Programska oprema in drugo...

Stanje: dober (rabljeno), Leto izdelave: 2011, Panelna žaga HOLZ-HER Tip: 1255 Stanje: rabljeno Leto izdelave: 2011 Dolžina reza: 6300 mm (maks.) Navpična višina reza: 2200 mm (maks.) Vodoravna višina reza: 2200 mm (maks.) Debelina obdelovanca: 60 mm (maks.) Višina predreza vodoravno: višina reza Višina predreza vodoravno: 2040 mm (maks.) Napetost: 400V 50 Hz Teža: 920 kg Ijdex Hyr Hopfx Ah Aeik Oprema: - Navodila za uporabo - Naslednji UVV pregled: 05/2026

Stanje: rabljeno, Leto izdelave: 1988, Širina reza: 5300 mm Višina obrezovanja: 1950 mm Globina reza: 80 mm Nagibna žaga: 90° Moč motorja: 4,6 kW Hitrost žaginega lista: pribl. 4.420/min. Premer žaginega lista: 300 mm Teža: pribl. 1200 kg Lokacija skladišča: Nattheim Iedpjx H Ak Ejfx Ah Ajik

Stanje: rabljeno, Leto izdelave: 2003, Used machine Year of manufacture: 2003 Equipment and Technical Data: - Control unit with LCD display - Swiveling control panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond joint cutters, both climb and counter-rotation Edge magazine 1903: Isdpfxjwka Nyo Ah Asik - Support disc 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip material Glue application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - PUR adhesives can be used Pressure unit 1816: - With driven roller - Pneumatic control of pressing system End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Application-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness roll material: 3 mm Edge thickness strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance to workpiece support: 470 mm Support disc Ø for edge material: 800 mm End trimming knives for rolls up to: 3 mm Heating time: 3.5 min Joint cutter power: 2 x 2 kW End trim saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction connection jointing unit: 120 mm Extraction connection milling unit: 70 mm Extraction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Holz Her Sprint 1312 FÜ + PU močna izvedba – debelina robov 0,4 - 12 mm SPS zaslonsko upravljanje Predrezkalna enota za pripravo pred lepljenjem Popolnoma avtomatski podajalnik robnega materiala za rolo in trak Lepilna postaja za kartuše + PU-lepljenje Iodex Eilqopfx Ah Asik samodejna testna šoba Višina obdelovanca 6-55 mm Kap enota za rolo in trak do 12 mm debeline robu z nastavljivim naklonom kap žage od 0-10° Rezkalna enota, poravnava do 12 mm, rezkanje radijev – fazno rezkanje – 15° MOT – 4 osi Strgalska enota za faze in radije z 2 pnevmatskima nosilcema strgal pnevmatsko vklapljanje in izklapljanje Površinska strgalska enota – finish Sistem za pršenje – PU Stroj v ODLIČNEM STANJU iz zaloge Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, Holz-Her Robna lepilka LUMINA 1380 Multi PUR in EVA lepilo (do 60 mm) + NIR agregat / laserski robovi do 45 mm, kot izmenljiva postaja Iijdpfxsx E A Dij Ah Aok Spojno rezkanje IntelliSet - korekcija orodja fa.s.t. - menjava v prosti vrzeli iTronic - nadzor tlaka in količine lepila Polna motorizirana oprema vseh agregatov Multifunkcijsko rezkanje - radij 1,3 mm (2x) & 2 mm (2x) Razpršilne naprave in še veliko več... Stroj je trenutno v obnovi v tovarni v Voitsbergu / Avstrija.

Stanje: rabljeno, Leto izdelave: 2014, • motorizirano nastavljanje pritisne letve • Električni sustav za beskonačno podešavanje pomaka, 400 V / 50 Hz, 2,2 kW • „Upravljanje PPC 221 – s 8,4'' VGA kolor zaslonom” Visokoučinkovita upravljačka jedinica s vrlo jednostavnim rukovanjem • Jedinica za predfrezanje rubova 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 o/min) s 2 freze za predfrezanje rubova ploče • Glodalo, dijamant Ø 70 x 64 x 30 mm, Z2, lijeva rotacija za jedinicu za predfrezanje 1801 / 1802 • Glodalo, dijamant Ø 70 x 64 x 30 mm, Z2, desna rotacija za jedinicu za predfrezanje 1801 / 1802 • Jedinica za ulaganje ruba 1903 SYNCHRO automatski transport rolne i trakastog materijala • Stanica za nanošenje ljepila Glu Jet GJ301 automatska (2,3 kW, 50 Hz) • Pristiskivač 1913 pneumatski prvi valjak pogonjen, 2 dodatna pritisna valjka s pojedinačnim pneumatskim upravljanjem • Odsječna jedinica 1918 (60 mm) pneumatska (2 x 0,45 kW, 12.000 o/min) pneumatski zakretna 0/10° • Multifunkcijska jedinica za glodanje 1827 pneumatska (2 x 0,65 kW, 200 Hz, 12.000 o/min) • Vertikalni valjci za praćenje ručni ručno podešavanje vertikalnog valjka za praćenje u koracima od 0,1 mm za obradu prevjesa ruba, npr. kod plastičnih rubova • Glodalo, dijamant Ø 56 / 60 mm, Z = 2, R = 2,0 mm, lijeva rotacija Dijamantno premazan, puni alat s CM tehnologijom (LEUCO sustav), s integriranim odvodom strugotine, patentiran ProLock-E • Glodalo, dijamant Ø 56 / 60 mm, Z = 2, R = 2,0 mm, desna rotacija Dijamantno premazan, puni alat s CM tehnologijom (LEUCO sustav), s integriranim odvodom strugotine, patentiran ProLock-E • Jedinica za kopiranje kutova 1832 (1 x 0,35 kW, 200 Hz, 12.000 o/min), za debljinu ruba do 3 mm • Glodalo, dijamant Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, s CM tehnologijom (LEUCO sustav), s integriranim odvodom strugotine, za profilirnu jedinicu 1832 • Strugač 1929 pneumatski uključujući pneumatsko podešavanje (zasebno za gornji i donji dio) • HW reverzibilni noževi za držač strugača 1929 / 1927 R = 2,0 mm (potrebna 2 komada) • Jedinica za ravno struganje 1964 Uklanjanje ostataka ljepila za čist spoj ljepila. • Polirna jedinica 1940 (2 x 0,12 kW, 50 Hz, 1400 o/min) Za završno čišćenje i poliranje ruba. Sa 2 tekstilna diska, zakretni raspon 0–5° Iijdpfex Huhcjx Ah Aek

Leto izdelave: 2004, Stanje: rabljeno,

Stanje: rabljeno, Rabljeni stroj Iodpfx Ahswka Nge Aeik Stanje: primerno starosti, primeren le za grobo rezanje Tehnični podatki: - Dolžina reza pribl. 5300 mm - Višina reza pribl. 2200 mm - Globina reza pribl. 80 mm - Maks. premer žaginega lista 300 mm - Moč motorja 4 kW Razpoložljivost: takoj Lokacija: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 2.200 mm, 3-osni elektromandrel Menjalnik orodij z 8 pozicijami Vrtalna enota z 10 navpičnimi in 6 vodoravnimi vreteni 3 vakuumske črpalke Etiketirni stroj Ijdex Iwn Ujpfx Ah Aeik

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Tloušťka hrany 0,4 – 6 mm Moderní ovládání s přepínačem pro nastavení agregátů Automatický zásobník hran pro rolovaný i pásový materiál Lepicí stanice GLU-JET pro kartuše + PU lepení Nanášení lepidla pomocí tryskové technologie Snímací tryska Výška obrobku 6–60 mm Automatické nastavení výšky lepidla Vysoce kvalitní tříválcový přítlačný mechanismus, první válec motorizovaný Ořezávací agregát pneumatický, pro rolovaný i pásový materiál do 6 mm tloušťky hrany Iiedsx Aqx Tjpfx Ah Ask S pneumatickým nastavením úhlu kapovacích pil od 0° do 10° Frézovací agregáty – začišťovací frézování do 6 mm, rádiusové frézování – zkosení – 15° Kopírovací agregát rohů – do 3 mm tloušťky hrany Stírací agregát pro fáze a rádiusy se dvěma držáky stíracích nožů Plošný stírací agregát – finální povrchová úprava Lešticí agregát Stříkací zařízení v oblasti vstupu a výstupu, stejně tak pro PU Stroj se všemi obráběcími nástroji Stroj je dílensky odzkoušen Skladem v Liebochu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.600 mm, širina obdelovanca (maks.): 2.200 mm, višina obdelovanca (maks.): 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Holz-Her 5-axis nesting machining center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed: 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools up to a maximum diameter of 350 mm via an HSK interface. Drilling unit with 24 spindles, comprising 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position rotary tool changer, pneumatically liftable with a cover to protect the HSK 63F holders, as well as a single-position pick-up changer for a saw blade with up to 350 mm diameter. Pneumatically retractable stops integrated into the table for special machining on the nesting table or for use with vacuum pods. Iijdsx E Ah Ispfx Ah Aok 750 m³/h vacuum capacity, divided across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently managed via ECO-VAC software. The table features a 16-zone vacuum system for focused vacuum application. The pre-installed push-off unit is connected to the extraction system and can be used to clean panels and/or the nesting table.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, pogonska enota žage: 3.000 W, Holz-her 1220 avtomatska stoječa krožna žaga za plošče. Več možnosti nastavitve, rezanje polovice ali cele plošče. Iisdex Eyqyopfx Ah Aok Možen preizkus, deluje dobro.

Stanje: nepreverjeno (rabljeno), Rabljeni stroj Rabljena stoječa ploščna žaga znamke Holz-Her tip 1210 Starejši model; primerna le za grobo razrezovanje Tehnični podatki: Dolžina reza pribl. 5300 mm Višina reza pribl. 2200 mm Globina reza pribl. 80 mm Premer žaginega lista maks. 300 mm Moč motorja 4 kW Lokacija: iz skladišča 54634 Bitburg Iiodjxviuaopfx Ah Aek - takoj na voljo -

Stanje: novo, Panel Saw HOLZ-HER 1255 SECTOR pro - Showroom Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision by HOLZ-HER HOLZ-HER's vertical panel saws combine proven technology from over 50 years of experience with a fundamentally robust construction, providing you with an exceptional price-performance ratio. Your advantages: - Completely welded frame for extremely high rigidity - Precise cutting quality - Finished cuts ready for immediate edge-banding - Powerful saw motor with 4 kW output - Space-saving panel sizing with a footprint starting at just 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE-countries – optional): Workstations must meet the highest requirements for health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes convenient digital measuring displays up to our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting board-shaped wood-based materials such as chipboard, MDF panels, veneered panels, multiplex, etc. Base Machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/saw unit for accurate cutting. Manual feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw Beam: Sturdy saw beam guided on precision rails. Pneumatic locking of the saw beam at top and bottom. Electrically monitored for vertical cuts. Saw Unit: Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded back in the upper position for precise engagement. Generously sized levers for easy swiveling. The cover opens the entire saw unit for quick tool changes, including ProLock quick-release chuck. View Slot: Riving knife can be retracted. Control Panel: Efficient machine operation. Ergonomically mounted at eye level. Lower Workpiece Support: Stable, wear-free stainless-steel support. Support up to cutting line: Iisdou R Syiopfx Ah Ajk Narrow workpieces cannot tip or fall through. Extraction: Efficient extraction system with two connectors: Saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lift Roller Transport System: Manually liftable and lowerable rollers for easy and material-friendly panel transport. Measuring Tape: For indication of horizontal cut with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the panel upper edge This offer is for an equipment package. The following items and options are included in the price: - Shifting grid - Manual longitudinal stop for vertical cuts - Digital measurement display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2,200 extraction system - Strip stop for repeat horizontal cuts - New showroom machine -

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Iisdpfswka N Tex Ah Ask Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: rabljeno, Holz Her UNO 1303 + PU Iiedpfx Ahexlz Nzs Ajk Debelina roba 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev enot Popolnoma avtomatski podajalnik robnega traku za kolutno in trakasto blago Postaja za nanašanje lepila: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pnevmatska pritiskalna enota Odtirna enota za kolutno in trakasto blago do 3 mm (6 mm) debeline roba S preklopom od 0-10° naklona žage Rezkalna enota, ravnalno rezkanje, rezkanje radijev, posnemanje robov do 15° Strgala za posneme in radije Površinsko strgalo – za končno obdelavo Stroj je PREGLEDAN v ODLIČNEM STANJU iz izredno dobro vzdrževane obrtne delavnice Na voljo iz zaloge Lieboch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.580 mm, širina obdelovanca (maks.): 1.650 mm, višina obdelovanca (maks.): 300 mm, premer orodja: 350 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machining Center 7235 Demonstration Machine Machining area: 4580 x 1650 mm, maximum workpiece size for edge routing (minus cutter radius). Iiedpox E Afmjfx Ah Aok Maximum panel width: 1,660 mm, maximum workpiece height: 300 mm. Easy and quick suction cup positioning with the Holz-Her VI.SE LED table. The various colored LEDs display the positions of the consoles and suction cups, including the rotational angle for rotatable cups. 8 consoles, each equipped with 2 suction cups, and electronic stop monitoring. The routing spindle delivers 13.0 kW of power and accommodates routing tools with a maximum diameter of 200 mm via an HSK interface, as well as saw blades up to 350 mm—ideal for heavy-duty machining, such as solid wood applications. 35 drilling spindles: 25 vertical and 10 horizontal. Two saw units each in X and Y axes, for saw blades up to 125 x 4 mm. 24-position disc tool changer and 14-position pick-up changer, plus a single-blade magazine for 350 mm saw blades, provide maximum flexibility in tooling. Safe Detect – safety monitoring system instead of safety mats or light barriers. Integrated waste transport conveyor in the machine base. And many other features.

Stanje: rabljeno, Leto izdelave: 2004, Dolžina reza 5300 mm, višina reza 2200 mm, motor 4,0 kW, globina reza 60 mm, žagin list 250 mm D. Lokacija skladišča: Nattheim. Ijdpfx Asxr A Nvjh Aoik

Stanje: novo, Machining Center HOLZ-HER 7405 EVOLUTION CONNECT - Demonstration Machine - This offer is a complete equipment package. Iiodpou Tid Hofx Ah Ajk The following items and options are included in the price: - Material Support Table - Height-adjustable Infeed Roller Conveyor - EVOLUTION Diamond Trimming Cutter Set - CAMPUS V8 EVOLUTION CAD/CAM Software - 21.5" Flat Screen Monitor, 16:9 - Workpiece Length Measurement LASER - Milling Unit 7830 - Tool Changer 7887, 6-position Pick-Up Magazine - ECO Vacuum System - Climate Control Unit for Electrical Cabinet Cooling - Tool Changer 7874 - Angle Gearbox 7869 - Adapter for Clamex Cutter - 4-Axis CLAMEX Tool Set - HSK-F 63 Tool Holder - Drilling Unit XL 7885, 19 Spindles - Handheld Control Device - Tool Set – EVOLUTION for XL Drilling Head 7885 - New demonstration machine -

Stanje: rabljeno, Holz Her STREAMER 1054 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with rotary switch for unit adjustment Pre-milling unit for jointing before gluing section Fully automatic edge magazine for both rolls and strip material Isdpfx Aoxu E Nweh Asik GLU-JET cartridge glue application station with PU gluing Adhesive application via nozzle technology Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, first roller motorized Pneumatic end trimming unit for rolls and strips up to 6 mm edge thickness With pneumatic adjustment from 0-10° angle for trimming saws Pneumatic milling unit for flush milling (6 mm), radius milling, bevel milling (15°), pneumatically controlled from the operator panel Scraper unit for bevels and radii with 2 scraper holders, pneumatically engageable/disengageable Surface scraper unit for finishing Spraying system - PU The machine is WORKSHOP-REFURBISHED and in TOP CONDITION

Stanje: novo, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration machine- New: GLUJET GJ725 Iiedpfx Ahou R Sy As Ask This offer concerns a configuration package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right rotation - Edge feeder 1903 - Adhesive application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunction milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left rotation - Diamond cutter Ø 56/60 mm, right rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper holder - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for the infeed and outfeed area - Motorised pressure beam adjustment - iTronic adaptive pressure and adhesive dosing control - Long infeed fence 1,252 mm - Motorised adjustment for infeed fence - Pressure unit DW301 with motorised NC axis - Extraction hoods for end trimming unit 1918 - Flat scraper FK701 - Spray device GM301 after pressure unit - new demonstration machine -